I have a string like:
text1 = 'python...is...fun...'
I want to replace the multiple '.'s to one '.' only when they are at the end of the string, i want the output to be:
python...is...fun.
So when there is only one '.' at the end of the string, then it won't be replaced
text2 = 'python...is...fun.'
and the output is just the same as text2
My regex is like this:
text = re.sub(r'(.*)\.{2,}$', r'\1.', text)
which i want to match any string then {2 to n} of '.' at the end of the string, but the output is:
python...is...fun..
any ideas how to do this?
Thx in advance!
You are making it a bit complex, you can easily do it by using regex as \.+$ and replace the regex pattern with single . character.
>>> text1 = 'python...is...fun...'
>>> new_text = re.sub(r"\.+$", ".", text1)
>>> 'python...is...fun.'
You may extend this regex further to handle the cases with input such as ... only, etc but the main concept was that there is no need to counting the number of ., as you have done in your answer.
Just look for the string ending with three periods, and replace them with a single one.
import re
x = "foo...bar...quux..."
print(re.sub('\.{2,}$', '.', x))
// foo...bar...quux.
import re
print(re.sub(r'\.{2,}$', '.', 'I...love...python...'))
As simple as that. Note that you need to escape the . because otherwise, it means whichever char
except \n.
I want to replace the multiple '.'s to one '.' only when they are at
the end of the string
For such simple case it's easier to substitute without importing re module, checking the value of the last 3 characters:
text1 = 'python...is...fun...'
text1 = text1[:-2] if text1[-3:] == '...' else text1
print(text1)
The output:
python...is...fun.
Related
currently I can have many dynamic separators in string like
new_123_12313131
new$123$12313131
new#123#12313131
etc etc . I just want to check if there is a special character in string then just get value after last separator like in this example just want 12313131
This is a good use case for isdigit():
l = [
'new_123_12313131',
'new$123$12313131',
'new#123#12313131',
]
output = []
for s in l:
temp = ''
for char in s:
if char.isdigit():
temp += char
output.append(temp)
print(output)
Result: ['12312313131', '12312313131', '12312313131']
Assuming you define 'special character' as anything thats not alphanumeric, you can use the str.isalnum() function to determine the first special character and leverage it something like this:
def split_non_special(input) -> str:
"""
Find first special character starting from the end and get the last piece
"""
for i in reversed(input):
if not i.isalnum():
return input.split(i)[-1] # return as soon as a separator is found
return '' # no separator found
# inputs = ['new_123_12313131', 'new$123$12313131', 'new#123#12313131', 'eefwfwrfwfwf3243']
# outputs = [split_non_special(input) for input in inputs]
# ['12313131', '12313131', '12313131', ''] # outputs
just get value after last separator
the more obvious way is using re.findall:
from re import findall
findall(r'\d+$',text) # ['12313131']
Python supplies what seems to be what you consider "special" characters using the string library as string.punctuation. Which are these characters:
!"#$%&'()*+,-./:;<=>?#[\]^_`{|}~
Using that in conjunction with the re module you can do this:
from string import punctuation
import re
re.split(f"[{punctuation}]", my_string)
my_string being the string you want to split.
Results for your examples
['new', '123', '12313131']
To get just digits you can use:
re.split("\d", my_string)
Results:
['123', '12313131']
I'm trying to replace special characters in a data frame with unaccented or different ones.
I can replace one with
df['col_name'] = df.col_name.str.replace('?','j')
this turned the '?' to 'j' - but - I can't seem to figure out how to change more than one..
I have a list of special characters that I want to change. I've tried using a dictionary but it doesn't seem to work
the_reps = {'?','j'}
df1 = df.replace(the_reps, regex = True)
this gave me the error nothing to replace at position 0
EDIT:
this is what worked - although it is probably not that pretty:
df[col]=df.col.str.replace('old char','new char')
df[col]=df.col.str.replace('old char','new char')
df[col]=df.col.str.replace('old char','new char')
df[col]=df.col.str.replace('old char','new char')...
for each one ..
import re
s=re.sub("[_list of special characters_]","",_your string goes here_)
print(s)
An example for this..
str="Hello$#& Python3$"
import re
s=re.sub("[$#&]","",str)
print (s)
#Output:Hello Python3
Explanation goes here..
s=re.sub("[$#&]","",s)
Pattern to be replaced → “[$#&]”
[] used to indicate a set of characters
[$#&] → will match either $ or # or &
The replacement string is given as an empty string
If these characters are found in the string, they’ll be replaced with an empty string
you can use Series.replace with a dictionary
#d = { 'actual character ':'replacement ',...}
df.columns = df.columns.to_series().replace(d, regex=True)
Try This:
import re
my_str = "hello Fayzan-Bhatti Ho~!w"
my_new_string = re.sub('[^a-zA-Z0-9 \n\.]', '', my_str)
print my_new_string
Output: hello FayzanBhatti How
I have some sample strings:
s = 'neg(able-23, never-21) s2-1/3'
i = 'amod(Market-8, magical-5) s1'
I've got the problem where I can figure out if the string has 's1' or 's3' using:
word = re.search(r's\d$', s)
But if I want to know if the contains 's2-1/3' in it, it won't work.
Is there a regex expression that can be used so that it works for both cases of 's#' and 's#+?
Thanks!
You can allow the characters "-" and "/" to be captured as well, in addition to just digits. It's hard to tell the exact pattern you're going for here, but something like this would capture "s2-1/3" from your example:
import re
s = "neg(able-23, never-21) s2-1/3"
word = re.search(r"s\d[-/\d]*$", s)
I'm guessing that maybe you would want to extract that with some expression, such as:
(s\d+)-?(.*)$
Demo 1
or:
(s\d+)-?([0-9]+)?\/?([0-9]+)?$
Demo 2
Test
import re
expression = r"(s\d+)-?(.*)$"
string = """
neg(able-23, never-21) s211-12/31
neg(able-23, never-21) s2-1/3
amod(Market-8, magical-5) s1
"""
print(re.findall(expression, string, re.M))
Output
[('s211', '12/31'), ('s2', '1/3'), ('s1', '')]
I want to remove all the text before and including */ in a string.
For example, consider:
string = ''' something
other things
etc. */ extra text.
'''
Here I want extra text. as the output.
I tried:
string = re.sub("^(.*)(?=*/)", "", string)
I also tried:
string = re.sub(re.compile(r"^.\*/", re.DOTALL), "", string)
But when I print string, it did not perform the operation I wanted and the whole string is printing.
I suppose you're fine without regular expressions:
string[string.index("*/ ")+3:]
And if you want to strip that newline:
string[string.index("*/ ")+3:].rstrip()
The problem with your first regex is that . does not match newlines as you noticed. With your second one, you were closer but forgot the * that time. This would work:
string = re.sub(re.compile(r"^.*\*/", re.DOTALL), "", string)
You can also just get the part of the string that comes after your "*/":
string = re.search(r"(\*/)(.*)", string, re.DOTALL).group(2)
Update: After doing some research, I found that the pattern (\n|.) to match everything including newlines is inefficient. I've updated the answer to use [\s\S] instead as shown on the answer I linked.
The problem is that . in python regex matches everything except newlines. For a regex solution, you can do the following:
import re
strng = ''' something
other things
etc. */ extra text.
'''
print(re.sub("[\s\S]+\*/", "", strng))
# extra text.
Add in a .strip() if you want to remove that remaining leading whitespace.
to keep text until that symbol you can do:
split_str = string.split(' ')
boundary = split_str.index('*/')
new = ' '.join(split_str[0:boundary])
print(new)
which gives you:
something
other things
etc.
string_list = string.split('*/')[1:]
string = '*/'.join(string_list)
print(string)
gives output as
' extra text. \n'
I have a string. How do I remove all text after a certain character? (In this case ...)
The text after will ... change so I that's why I want to remove all characters after a certain one.
Split on your separator at most once, and take the first piece:
sep = '...'
stripped = text.split(sep, 1)[0]
You didn't say what should happen if the separator isn't present. Both this and Alex's solution will return the entire string in that case.
Assuming your separator is '...', but it can be any string.
text = 'some string... this part will be removed.'
head, sep, tail = text.partition('...')
>>> print head
some string
If the separator is not found, head will contain all of the original string.
The partition function was added in Python 2.5.
S.partition(sep) -> (head, sep, tail)
Searches for the separator sep in S, and returns the part before it,
the separator itself, and the part after it. If the separator is not
found, returns S and two empty strings.
If you want to remove everything after the last occurrence of separator in a string I find this works well:
<separator>.join(string_to_split.split(<separator>)[:-1])
For example, if string_to_split is a path like root/location/child/too_far.exe and you only want the folder path, you can split by "/".join(string_to_split.split("/")[:-1]) and you'll get
root/location/child
Without a regular expression (which I assume is what you want):
def remafterellipsis(text):
where_ellipsis = text.find('...')
if where_ellipsis == -1:
return text
return text[:where_ellipsis + 3]
or, with a regular expression:
import re
def remwithre(text, there=re.compile(re.escape('...')+'.*')):
return there.sub('', text)
import re
test = "This is a test...we should not be able to see this"
res = re.sub(r'\.\.\..*',"",test)
print(res)
Output: "This is a test"
The method find will return the character position in a string. Then, if you want remove every thing from the character, do this:
mystring = "123⋯567"
mystring[ 0 : mystring.index("⋯")]
>> '123'
If you want to keep the character, add 1 to the character position.
From a file:
import re
sep = '...'
with open("requirements.txt") as file_in:
lines = []
for line in file_in:
res = line.split(sep, 1)[0]
print(res)
This is in python 3.7 working to me
In my case I need to remove after dot in my string variable fees
fees = 45.05
split_string = fees.split(".", 1)
substring = split_string[0]
print(substring)
Yet another way to remove all characters after the last occurrence of a character in a string (assume that you want to remove all characters after the final '/').
path = 'I/only/want/the/containing/directory/not/the/file.txt'
while path[-1] != '/':
path = path[:-1]
another easy way using re will be
import re, clr
text = 'some string... this part will be removed.'
text= re.search(r'(\A.*)\.\.\..+',url,re.DOTALL|re.IGNORECASE).group(1)
// text = some string