We Keep Coding

How do I fix "pip"?

I have python 3.8.0 (on a Windows PC)
When I try to run: pip install selenium I get the following error:
Fatal error in launcher: Unable to create process using '"c:\python38\python.exe" "C:\Python38\Scripts\pip.exe" install selenium': The system cannot find the file specified.
python pip install selenium and py pip install selenium both give me this error:
can't open file 'pip': [Errno 2] No such file or directory
pip3 install selenium:
Fatal error in launcher: Unable to create process using '"c:\python38\python.exe" error: "C:\Python38\Scripts\pip3.exe" install selenium': The system cannot find the file specified.
When I run: python -m pip --version I get:
pip 20.0.2 from C:\Users\<UserName>\AppData\Local\Programs\Python\Python38\lib\site-packages\pip (python 3.8)
I'm having the same problems trying to install django as well.

Your output: C:\Users\\AppData\Local\Programs\Python\Python38\lib\site-packages\pip , makes me think that you've messed-up your pip installation.
To recover do the following:
Run CMD as admin
Do a python -m pip install -U --force pip (this will fix your pip installation)
Then close the CMD and open another admin CMD to make sure you get the PATH updates effectively
Do pip install -U --force selenium
This should help to solve the issue.

Try below command and it works for me:
python -m pip install -U --force pip
Above command will first uninstall pip from yours system if already installed and install a fresh version. Once done just type pip and press enter. You will see pip common commands and general options.
Now try to install any module as per your choice.
For Example:
pip install sklearn
If installation begin means your issue has been resolved.

I had the same problem and found the solution:
First check whether pip installed or not , in command prompt try pip --version, you should get something like this - pip 22.0.4.
if not installed (command not recognized) try to use install pip-
using curl, try this command -
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
then check again with pip --version
This website has detailed steps.

Do in your terminal (fix your pip installation) 🖇️🔗
python -m pip install -U --force pip
Then Do
pip install -U --force selenium

Environment Error [Errno 2] while installing pip packages or upgrading pip

pip used to work fine until recently. First I was trying to install a pip-package using
pip install -e [some-git-link]
and I get the error
Could not install packages due to an EnvironmentError: [Errno 2] No such file or directory: '/home/me/.local/lib/python2.7/site-packages/pip-19.0.1.dist-info/METADATA'
I then cd'ed into site-packages and the folder is empty. Indeed, I have pip installed in dis-packages and its version is 18.1, not 19.0!
I tried to update pip through
pip install -U pip
but I get the same error.
Typing
pip --version
I get
/usr/local/lib/python2.7/dist-packages/pip/_vendor/requests/init.py:83: RequestsDependencyWarning: Old version of cryptography ([1, 2, 3]) may cause slowdown.
warnings.warn(warning, RequestsDependencyWarning)
pip 18.1 from /usr/local/lib/python2.7/dist-packages/pip (python 2.7)
so it seems that pip 18.1 is installed. Indeed, if I try
sudo apt-get install python-pip
I get
python-pip is already the newest version (8.1.1-2ubuntu0.4).
0 upgraded, 0 newly installed, 0 to remove and 62 not upgraded.
I was wondering if all these problems were coming from the warning on the cryptography, and so I tried to do
sudo pip install --upgrade cryptography
but obviously I go back to the same Environment Error.

Thou shalt not use sudo with pip. Using sudo with pip is asking for trouble. When you do that you are having pip and your OS's package manager get into a fight. When they fight no one wins, least of all your Python installation and personal sanity. I know countless tutorials tell you to sudo pip install, but they are not your friends. The only safe and reliable way to maintain a functional Python installation is to let your OS's package manager manage what it wants to manage and either use pip install --user or virtual environments (using either virtualenv or optionally python -m venv if you're on Python 3).
I really can't stress enough that you will constantly be running into little weird things (and occasional catastrophic problems) within your Python installation if you persistently sudo install things. Learn to love virtual environments! You can even modify your shell's PATH so that things you install in an environment are available as commands (which is commonly why people think they need sudo pip install).

You could test to update PythonOpenSSL :
$ sudo python -m easy_install --upgrade pyOpenSSL
If not Ok, please do :
$ sudo pip install --upgrade cryptography
But error with : $ sudo pip
So do after :
$ sudo python -m easy_install --upgrade pyOpenSSL
Have Fun,
Johan MRe

I was getting this error trying to install packages while building a Docker image (with python:3.8 as base). Upgrading pyOpenSSL as #Johan MRe suggested solved it for me.
RUN python3 -m easy_install --upgrade pyOpenSSL

How to deal with "Could not install packages due to an EnvironmentError" when upgrade pip
First run command line in Administration mode both window and OS:
Next,
For windows: use this command to upgrade pip
python -m pip install --user --upgrade pip
For MacOS:
sudo python -m pip install --user --upgrade pip

Upgrade pip in Amazon Linux

I wanted to deploy my Python app on Amazon Linux AMI 2015.09.1, which has Python2.7 (default) and pip (6.1.1). Then, I upgraded the pip using the command:
sudo pip install -U pip
However, it seemed broken, and showed the message when I tried to install packages:
pkg_resources.DistributionNotFound: pip==6.1.1
I found out that pip remove the previous files located in /usr/bin/, and installed the new one in /usr/local/bin. Thus, I tried to specify the location by using the command:
sudo pip install -U --install-option="--prefix='/usr/bin'" pip
Nevertheless, it still installed the new one in /usr/local/bin. In addition to that, pip could not work well with sudo although it successfully installed. The error message :
sudo: pip2.7: command not found
Is there a way to properly manage pip?

Try:
sudo which pip
This may reveal something like 'no pip in ($PATH)'.
If that is the case, you can then do:
which pip
Which will give you a path like /usr/local/bin/pip.
Copy + paste the path to pip to the sbin folder by running: sudo cp /usr/local/bin/pip /usr/sbin/
This will allow you to run sudo pip without any errors.

Struggled with this for a while. Here's what I've found:
ec2_user finds the pip executable, but has a module import error due to other having no read/execute permissions on the pip folders in the /usr/local/lib/python2.7/site-packages folder. This is actually okay, since in most cases, pip installs fail when not run as root anyway.
sudo cannot find pip.
Entering root with sudo su - allows pip to be run without issue.
The reason sudo pip stops working after the upgrade, is because the executable (or symbolic link) is removed from /usr/bin. However, what remains is a file called pip-27, which contains the following:
#!/usr/bin/python2.7
# EASY-INSTALL-ENTRY-SCRIPT: 'pip==6.1.1','console_scripts','pip2.7'
__requires__ = 'pip==6.1.1'
import sys
from pkg_resources import load_entry_point
if __name__ == '__main__':
sys.exit(
load_entry_point('pip==6.1.1', 'console_scripts', 'pip2.7')()
)
So, that's where our error comes from, as the upgrade clearly doesn't clean this file up. Not entirely clear on where the name translation from pip to pip-2.7 occurs.
As mentioned in another answer, pip now exists in /usr/local/bin after the upgrade, which is no longer in the sudo secure path. You can add this path to the secure_path variable by running sudo visudo. Another alternative, if you'd prefer to not add that path to your secure_path is to make a symbolic link to the new pip executable in /usr/bin.

The problem is partly answered by your question. The Amazon AMI doesn't consider /usr/local/bin to be part of the root account's PATH. You can fix this by updating the root account's ~/.bashrc to include it.
Something like this...
export PATH=$PATH:/usr/local/bin

After struggling with this for hours and reading comments
which pip gave /usr/bin/pip , but the actual pip was located at /usr/local/bin/pip due to pip upgrade and clean up was not complete
So removing the pip in /usr/bin/
sudo rm /usr/bin/pip
and also adding the new pip to your export path
vim ~/.bash_profile
PATH=$PATH:$HOME/bin:/usr/local/bin
exit terminal, and login back
which pip should give /usr/local/bin/pip
pip install --upgrade pip

This works for me
sudo /usr/local/bin/pip install --upgrade pip

To add to angelokh
sudo `which pip` install --upgrade pip

I think the best strategy in this case is to manage pip is as part of a virtual environment using virtualenv rather than messing with the system-level version.
If you're OK with that, here's the basic idea:
Install the version of virtualenv packaged with the version of pip you are looking to upgrade to to the system-level pip (e.g. virtualenv==15.1.0 comes with pip==9.0.1):
$ sudo pip install -U virtualenv==15.1.0
You are using pip version 6.1.1, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Collecting virtualenv==15.1.0
Downloading virtualenv-15.1.0-py2.py3-none-any.whl (1.8MB)
100% |████████████████████████████████| 1.8MB 135kB/s
Installing collected packages: virtualenv
Found existing installation: virtualenv 12.0.7
Uninstalling virtualenv-12.0.7:
Successfully uninstalled virtualenv-12.0.7
Successfully installed virtualenv-15.1.0
I used the virtualenv release notes to find out which version of pip corresponds to which version of virtualenv.
Create the virtual environment:
$ virtualenv myenv
New python executable in /home/ec2-user/myenv/bin/python2.7
Also creating executable in /home/ec2-user/myenv/bin/python
Installing setuptools, pip, wheel...done.
Activate the virtual environment and confirm the version and location of the upgraded pip:
$ source myenv/bin/activate
(myenv) $ pip -V
pip 9.0.1 from /home/ec2-user/myenv/local/lib/python2.7/dist-packages (python 2.7)
(myenv) $ which pip
~/myenv/bin/pip
This should allow you to install packages to this virtualenv using the pip version of your choice, without the need for sudo.

I think you've didn't installed the pythonXX-pip package.
I've upgraded mine straight to Python3.4, these commands works for me.
sudo su
yum install python34
yum install python34-pip

ImportError: No module named virtualenv

I am using Django 1.3.7 and python 2.7.6 on windows7
I got an error when I executing my manage.py in this line of code
import shutil, sys, virtualenv, subprocess
amd running it, I got this error
C:\Django-Proj\>python manage.py update_ve
Traceback (most recent call last):
File "manage.py", line 4, in <module>
import shutil, sys, virtualenv, subprocess
ImportError: No module named virtualenv
Does anyone have an Idea about my case?

Install virtualenv using pip install virtualenv.
If you have it already installed, try reinstalling it by removing it with pip uninstall virtualenv and then reinstalling it.
Good Luck.

I had to install virtualenv with the -H flag to set HOME variable to target user's home dir.
sudo -H pip install virtualenv

I think the problem is you need sudo to globally install virtualenv.
> pip install virtualenv
Could not find an activated virtualenv (required).
> sudo pip install virtualenv
Downloading/unpacking virtualenv
...
But this creates files readable only by root (depending on the umask).
In this case, uninstalling/reinstalling may not always help.
You can check with ls -la /usr/local/lib/python2.7/dist-packages/virtualenv.py (replacing 2.7 with whatever version you have or are targeting).
My solution was simply:
sudo chmod -R o+rX /usr/local/lib/python2.7

Use pip3 instead of pip. I had the same issue and pip3 worked for me.
$ pip3 install virtualenv
$ virtualenv venv --python=python3

Try
python3 -m pip uninstall virtualenv
python3 -m pip install virtualenv

I just ran into this same problem. I had to pip uninstall virtualenv as a user with admin rights, then pip install virtualenv as a normal user. I think it's some kind of permissions issue if you installed virtualenv under admin rights.

>virtualenv
ImportError: No module named 'virtualenv'
>pip uninstall virtualenv
PermissionError: [Errno 13] Permission denied:
>sudo pip uninstall virtualenv
Successfully uninstalled virtualenv-15.1.0
>pip install virtualenv
Collecting virtualenv
>virtualenv
Options:
Bingo!

I had the same problem when I created my virtualenv via pycharm and installed requirements with pycharm.
After trail and error , I found that installed requirements are not taken into account by the virtualenv.
The solution is to reinstall all requirements once you have activated your virtualenv:
venv\scripts\activate
python -m pip install -r YourRequirements.txt
Next time I'd better create my virtualenv directly with command line

Got this error when using the ansible pip module automating some pip installs on my localhost.
fatal: [localhost]: FAILED! => {"changed": false, "cmd": ["/opt/bin/virtualenv", "--system-site-packages", "-p/usr/bin/python3", "/opt/venv/myenv"], "msg": "\n:stderr: /usr/bin/python3: No module named virtualenv\n"}
Uninstalling virtualenv python3 -m pip uninstall virtualenv did show virtualenv was installed here /home/ubuntu/.local/bin/virtualenv.
In the ansible task specify the virtualenv_command:
- name: install requirements file
pip:
virtualenv_command: "/home/{{whoami.stdout}}/.local/bin/virtualenv"
virtualenv: "/home/{{whoami.stdout}}/.venv/{{item.env.virtualenv}}"
requirements: "/home/{{whoami.stdout}}/git/{{item.env.requirements_txt}}"
virtualenv_site_packages: yes
when: req_stat.stat.exists

For mac os the issue was with virtualenv. This is because the folder virtualenv did not exist.
This worked well
python3 -m venv env

How do I update/upgrade pip itself from inside my virtual environment?

I'm able to update pip-managed packages, but how do I update pip itself? According to pip --version, I currently have pip 1.1 installed in my virtualenv and I want to update to the latest version.
What's the command for that? Do I need to use distribute or is there a native pip or virtualenv command? I've already tried pip update and pip update pip with no success.

pip is just a PyPI package like any other; you could use it to upgrade itself the same way you would upgrade any package:
pip install --upgrade pip
On Windows the recommended command is:
python -m pip install --upgrade pip

The more safe method is to run pip though a python module:
python -m pip install -U pip
On windows there seem to be a problem with binaries that try to replace themselves, this method works around that limitation.

In my case my pip version was broken so the update by itself would not work.
Fix:
(inside virtualenv):easy_install -U pip

I tried all of these solutions mentioned above under Debian Jessie. They don't work, because it just takes the latest version compile by the debian package manager which is 1.5.6 which equates to version 6.0.x. Some packages that use pip as prerequisites will not work as a results, such as spaCy (which needs the option --no-cache-dir to function correctly).
So the actual best way to solve these problems is to run get-pip.py downloaded using wget, from the website or using curl as follows:
wget https://bootstrap.pypa.io/get-pip.py -O ./get-pip.py
python ./get-pip.py
python3 ./get-pip.py
This will install the current version which at the time of writing this solution is 9.0.1 which is way beyond what Debian provides.
$ pip --version
pip 9.0.1 from /home/myhomedir/myvirtualenvdir/lib/python2.7/dist-packages (python 2.7)
$ pip3 --version
pip 9.0.1 from /home/myhomedir/myvirtualenvdir/lib/python3.4/site-packages (python 3.4)

In case you are using venv any update to pip install will result in upgrading the system pip instead of the venv pip. You need to upgrade the pip bootstrapping packages as well.
python3 -m pip install --upgrade pip setuptools wheel

for windows,
go to command prompt
and use this command
python -m pip install -–upgrade pip
Dont forget to restart the editor,to avoid any error
you can check the version of the pip by
pip --version
if you want to install any particular version of pip , for example version 18.1 then use this command,
python -m pip install pip==18.1

pip install --upgrade pip
In UBUNTU 18.04 I got the following error when I execute the above command:
ERROR: Could not install packages due to an EnvironmentError: [Errno 13] Permission denied: '/usr/local/bin/pip'
Consider using the `--user` option or check the permissions.
The below command solves my problem:
pip install --upgrade pip --user

Upgrading pip using 'pip install --upgrade pip' does not always work because of the dreaded cert issue: There was a problem confirming the ssl certificate: [SSL: TLSV1_ALERT_PROTOCOL_VERSION] tlsv1 alert protocol version
I like to use the one line command for virtual envs:
curl https://bootstrap.pypa.io/get-pip.py | python -
Or if you want to install it box wide you will need
curl https://bootstrap.pypa.io/get-pip.py | sudo python -
you can give curl a -s flag if you want to silence the output when running in an automation script.

To get this to work for me I had to drill down in the Python directory using the Python command prompt (on WIN10 from VS CODE). In my case it was in my AppData\Local\Programs\Python\python35-32 directory. From there now I ran the command...
python -m pip install --upgrade pip
This worked and I'm good to go.

For linux
python3 -m pip install --upgrade pip
For windows:
Type Command Prompt in the Windows search box
In the Command Prompt, type cd\
Press Enter, and you’ll see the drive name C:\>
Locate your Python application path, which is the folder where you originally installed Python
Here is an example of a Python application path:
C:\Users\Ron\AppData\Local\Programs\Python\Python39
Once you retrieved the Python application path, type the following command in the Command Prompt:
cd followed by your Python application path
For our example:
C:\>cd C:\Users\Ron\AppData\Local\Programs\Python\Python39
Press Enter
Type python -m pip install --upgrade pip and press Enter

In my case this worked from the terminal command line in Debian Stable
python3 -m pip install --upgrade pip

Open Command Prompt with Administrator Permissions, and repeat the command:
python -m pip install --upgrade pip

pip version 10 has an issue. It will manifest as the error:
ubuntu#mymachine-:~/mydir$ sudo pip install --upgrade pip
Traceback (most recent call last):
File "/usr/bin/pip", line 9, in <module>
from pip import main
ImportError: cannot import name main
The solution is to be in the venv you want to upgrade and then run:
sudo myvenv/bin/pip install --upgrade pip
rather than just
sudo pip install --upgrade pip

I was in a similar situation and wanted to update urllib3 package.
What worked for me was:
pip3 install --upgrade --force-reinstall --ignore-installed urllib3==1.25.3

On my lap-top with Windows 7 the right way to install latest version of pip is:
python.exe -m pip install --upgrade pip

First, do this:
sudo apt install python3-pip python-setuptools-doc
Then, as a non-root user (NEVER, never run pip* as root!):
# N.B. bash shell works for this, I have never tested with other shells!
. ....your_virtualenv_folder/bin/activate
pip3 install -U pip
Note: -U is a synonym for --upgrade, as far as I know.

I had installed Python in C:\Python\Python36 so I went to the Windows command prompt and typed cd C:\Python\Python36 to get to the right directory. Then entered the python -m install --upgrade pip all good!

Single Line Python Program
The best way I have found is to write a single line program that downloads and runs the official get-pip script. See below for the code.
The official docs recommend using curl to download the get-pip script, but since I work on windows and don't have curl installed I prefer using python itself to download and run the script.
Here is the single line program that can be run via the command line using Python 3:
python -c "import urllib.request; exec(urllib.request.urlopen('https://bootstrap.pypa.io/get-pip.py').read())"
This line gets the official "get-pip.py" script as per the installation notes and executes the script with the "exec" command.
For Python2 you would replace "urllib.request" with "urllib2":
python -c "import urllib2; exec(urllib2.urlopen('https://bootstrap.pypa.io/get-pip.py').read())"
Precautions
It's worth noting that running any python script blindly is inherently dangerous. For this reason, the official instructions recommend downloading the script and inspecting it before running.
That said, many people don't actually inspect the code and just run it. This one-line program makes that easier.

I had a similar problem on a raspberry pi.
The problem was that http requires SSL and so I needed to force it to use https to get around this requirement.
sudo pip install --upgrade pip --index-url=https://pypi.python.org/simple
or
sudo pip-3.2 --upgrade pip --index-url=https://pypi.python.org/simple/

Head to your command prompt and type the following:
python -m pip install --upgrade pip

While updating pip in virtual env use full path in python command
Envirnments folder struture
myenv\scripts\python
h:\folderName\myenv\scripts\python -m pip install --upgrade pip

Very Simple. Just download pip from https://bootstrap.pypa.io/get-pip.py . Save the file in some forlder or dekstop. I saved the file in my D drive.Then from your command prompt navigate to the folder where you have downloaded pip. Then type there
python -get-pip.py

In linux
I will update with this code
sudo -H pip3 install --upgrade pip