I create a simply client and a server using python. In order to create my server I do a port forwarding. But I have a problem that I don't success to resolve, in fact no matter if the server is online or offline. My socket gives me a message of success. Where does this failure come from ?
This is my code in the client:
import socket
from threading import Thread
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
client_socket.connect(("89.139.105.181", 8350))
print "Client connection success"
except socket.error:
print "Client error"
def send_to_server():
msg = raw_input("Client:")
client_socket.send(msg)
def recv_from_server():
response_server = client_socket.recv(1024)
print response_server
def main():
while True:
send_thread = Thread(target=send_to_server,)
recv_thread = Thread(target=recv_from_server,)
send_thread.start()
recv_thread.start()
send_thread.join()
recv_thread.join()
if __name__ == "__main__":
main()
As you are connecting to the intermediate node using socket which in turn forwarding you request to target node in the same network, the connection to your intermediate node will be successful even if your target node is down.
So since your client's client_socket.connect() won't be informed about whether the socket connection to target node from intermediate node was successful or not, it will always return success as it was successfully connected to the intermediate node.
But a simple hack to find out whether you were actually connected to target node would be to check whether you are actually receiving the expected response within a specified amount of time after sending the request (Assuming that for every request being sent by client, the server will be sending some response).
Related
hi i make model server client which works fine and i also create separate GUI which need to two input server IP and port it only check whether server is up or not. But when i run server and then run my GUI and enter server IP and port it display connected on GUI but on server side it throw this error. The Server Client working fine but integration of GUI with server throw below error on server side.
conn.send('Hi'.encode()) # send only takes string BrokenPipeError: [Errno 32] Broken pip
This is server Code:
from socket import *
# Importing all from thread
import threading
# Defining server address and port
host = 'localhost'
port = 52000
data = " "
# Creating socket object
sock = socket()
# Binding socket to a address. bind() takes tuple of host and port.
sock.bind((host, port))
# Listening at the address
sock.listen(5) # 5 denotes the number of clients can queue
def clientthread(conn):
# infinite loop so that function do not terminate and thread do not end.
while True:
# Sending message to connected client
conn.send('Hi'.encode('utf-8')) # send only takes string
data =conn.recv(1024)
print (data.decode())
while True:
# Accepting incoming connections
conn, addr = sock.accept()
# Creating new thread. Calling clientthread function for this function and passing conn as argument.
thread = threading.Thread(target=clientthread, args=(conn,))
thread.start()
conn.close()
sock.close()
This is part of Gui Code which cause problem:
def isOpen(self, ip, port):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
s.connect((ip, int(port)))
data=s.recv(1024)
if data== b'Hi':
print("connected")
return True
except:
print("not connected")
return False
def check_password(self):
self.isOpen('localhost', 52000)
Your problem is simple.
Your client connects to the server
The server is creating a new thread with an infinite loop
The server sends a simple message
The client receives the message
The client closes the connection by default (!!!), since you returned from its method (no more references)
The server tries to receive a message, then proceeds (Error lies here)
Since the connection has been closed by the client, the server cannot send nor receive the next message inside the loop, since it is infinite. That is the cause of the error! Also there is no error handling in case of closing the connection, nor a protocol for closing on each side.
If you need a function that checks whether the server is online or not, you should create a function, (but I'm sure a simple connect is enough), that works like a ping. Example:
Client function:
def isOpen(self, ip, port):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
s.connect((str(ip), int(port)))
s.send("ping".encode('utf-8'))
return s.recv(1024).decode('utf-8') == "pong" # return whether the response match or not
except:
return False # cant connect
Server function:
def clientthread(conn):
while True:
msg = conn.recv(1024).decode('utf-8') #receiving a message
if msg == "ping":
conn.send("pong".encode('utf-8')) # sending the response
conn.close() # closing the connection on both sides
break # since we only need to check whether the server is online, we break
From your previous questions I can tell you have some problems understanding how TCP socket communication works. Please take a moment and read a few articles about how to communicate through sockets. If you don't need live communications (continous data stream, like a video, game server, etc), only login forms for example, please stick with well-known protocols, like HTTP. Creating your own reliable protocol might be a little complicated if you just got into socket programming.
You could use flask for an HTTP back-end.
I'm trying to make a Python server where multiple clients can connect but I've run into a problem I tried everything that I found on the internet.
I'm running a laptop whit windows 7 and an I3 processor.
This is the file called tcp:
import socket
def make_server (ip,port):
try:
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server.bind((ip, port))
server.listen(1)
return server
except Exception as ex:
print(ex)
return None
def accept(server):
conn, addr = server.accept()
return conn
def make_client():
client = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
return client
def client_connect(client,ip,port):
client.connect((ip,port))
def sendall(conn,mess):
conn.send(str(mess).encode("utf-8"))
def rec(conn,rate):
mess = conn.recv(rate).decode("utf-8")
return mess
def close(client):
client.close()
This is the server:
from multiprocessing import Process
from random import randint
import tcp
import sys
def start(sip, sport):
print("Making sob server...")
print("id= {}".format(sport))
sserver = tcp.make_server(sip, sport)
print("Sub Server Started!")
sconn = tcp.accept(sserver)
tcp.sendall(sconn, "connected!!")
while True:
try:
tcp.sendall(sconn, randint(0, 100))
except Exception as ex:
print("")
print("From server {} error:".format(port))
print(ex)
print("")
break
ip = "192.168.0.102"
port = 8000
subport = 9000
server = tcp.make_server(ip, port)
if server is None:
sys.exit(0)
print("Started!")
while True:
print("Wating for new connection!")
con = tcp.accept(server)
print("Connected!")
subport = subport + 1
tcp.sendall(con, subport)
print("New Port Sent!")
print("New Port = {}".format(subport))
subs = Process(target=start, args=(ip, subport))
subs.start()
subs.join()
This is the client:
import tcp
import time
nport = 0
ip = "192.168.0.102"
port = 8000
client = tcp.make_client()
tcp.client_connect(client,ip,port)
nport = tcp.rec(client,1024)
print(nport)
tcp.close(client)
nport = int(nport)
time.sleep(1)
print(nport)
client = tcp.make_client()
tcp.client_connect(client,ip,nport)
while True:
mess = tcp.rec(client, 1024)
if(mess):
print(mess)
The error is:
[WinError 10048]Only one usage of each socket address (protocol/network address/port) is normally permitted Python
Feel free to change anything you want.
If you need any info in plus just ask.
You are creating a socket in the client with tcp.make_client. You are then using that socket to connect to the server via tcp.client_connect. Presumably you successfully receive the new port number back from the server. But then you are trying to re-use the same socket to connect to those ports.
This is the proximate cause of your error: A socket can only be used for a single TCP connection. If you want to create a new connection, you must first create a new socket.
That being said, if you are simply trying to create a server that will accept multiple connections, you're making it way too complicated. The server can receive any number of connections on its single listening port, as long as a different address/port combination is used by each client.
One way to structure this in a server is something like this:
# Create and bind listening socket
lsock = socket.socket()
lsock.bind(('', port))
lsock.listen(1)
while True:
csock, addr = lsock.accept()
print("Got connection from {}".format(addr))
# Start sub-process passing it the newly accepted socket as argument
subs = Process(target=start, args=(csock, ))
subs.start()
# Close our handle to the new socket (it will remain open in the
# sub-process which will use it to talk to the client)
csock.close()
# NOTE: do not call subs.join here unless you want the parent to *block*
# waiting for the sub-process to finish (and if so, what is the point in
# creating a sub-process?)
There are several others ways to do it as well: you can create multiple threads to handle multiple connections, or you can handle all connections in a single thread by using select or with asynchronous I/O.
The client is typically much simpler -- as it usually only cares about its own one connection -- and doesn't care which way the server is implemented:
sock = socket.socket()
sock.connect((ip, port))
while True:
sock.send(...)
sock.recv(...)
If the client does wish to connect to the same server again, it simply creates a second socket and call its connect method with the same server IP and port.
Usually, the client never needs to specify its own port, only the server's port. It simply calls connect and the client-side operating system chooses an unused port for it. So the first time, the client creates a socket and connects it (to the server's listening port), the client-side OS may choose port 50001. The next time it creates and connects a socket, it may get 50002 and so on. (The exact port numbers chosen depend on the operating system implementation and other factors, such as what other programs are running and creating connections.)
So, given client IP 192.168.0.101 and server IP 192.168.0.102, and assuming the server is listening on port 8000, this would result in these two connections:
(192.168.0.101/50001) ====> (192.168.0.102/8000)
(192.168.0.101/50002) ====> (192.168.0.102/8000)
I have been self-learning python since few months now , and finally learning Socket programming. As an text book exercise, I am supposed to design a half-duplex chat system . Below is the code. The first request and response are just fine , but everytime I try sending a second message from client, the server seems to be hanging. The program is TCP based.
I am suspecting that since ss.accept() is being called everytime a new message has to be sent, a new thread is being created but since I have made only 1 call to sc.connect() from client , may be my new connection at the server end is hanging there for infinite time.
As a trail : I called ss.accept() outside the while loop, ie making only 1 connection and listening to data over and over on while loop, the conversations works just fine
Can someone please have a look a the code and help me understand where exactly is the issue.
Since, I am learning, I have not moved to twisted yet. I want to learn all the basics first before I move to frameworks.
!bin/usr/env python
import socket, sys
HOST =''
PORT = 1060
ADDR =(HOST,PORT)
def userinput(sock):
usermessage = input('>')
sock.sendall(str(len(usermessage)))
return usermessage
def server():
s = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET,socket.SO_REUSEADDR,1)
s.bind(ADDR)
s.listen(1)
print 'the server is listening at',s.getsockname()
while True:
ss,sockname = s.accept()
#listen to determine the bytes sent by client
msglen = ss.recv(4096)
#accept the complete message
msg = ss.recv(int(msglen))
print 'client:', repr(msg)
servermsg = userinput(ss)
ss.sendall(servermsg)
print " ---------------"
ss.close()
def client():
sc = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
sc.connect(ADDR)
while True:
message = userinput(sc)
sc.sendall(message)
replylen = sc.recv(4096)
reply = sc.recv(int(replylen))
print "reply:",reply
print "----------------"
sc.close()
if sys.argv[1:] == ['server']:
server()
elif sys.argv[1:] == ['client']:
client()
else:
print >> sys.stderr,'usage:tcp_2_7.py server|client[host]'
Your trial - accepting once and then receiving multiple messages - is how you should do this. Calling accept is waiting for a new connection - you don't need to do this every time you want to send or receive a message, just as you don't want to call connect every time you want to send or receive.
Think of it this way:
When you connect to a chat server, do you connect, send a message, then disconnect immediately? No - you have a constant open connection which messages are sent through, and the connection is only closed at the end of a chat session.
From the docs on accept:
socket.accept()
Accept a connection. The socket must be bound to an
address and listening for connections. The return value is a pair
(conn, address) where conn is a new socket object usable to send and
receive data on the connection, and address is the address bound to
the socket on the other end of the connection.
I'm building a game-server in Python. The functionality is pretty well-defined. The server will listen on the port 6000 and a remote client will send a request. Then the server will establish a connection to the client's port 7000. From then on, the client will keep sending 'requests' (basically, strings such as "UP#", "DOWN#", "SHOOT#" etc.) to server's port 6000.
This is the problem. I have made a 'server' who listens on the port 6000. This means I cannot bind a client to the same port. Is there a way that I can get the data string of an incoming request in a server? So far, I only have this.
What am I doing wrong here? Any workarounds for this issue? In short, can I read the incoming request string from a client in the server code?
Thanks in advance.
def receive_data(self):
errorOccured = False
connection = None
try:
listener = socket.socket() # Create a socket object.
host = socket.gethostname()
port = 6000 # The port that the server keeps listening to.
listener.bind(('', port))
# Start listening
listener.listen(5)
statement = ("I:P0:7,6;8,1;0,4;3,8;3,2;1,6:5,4;9,3;8,7;2,6;1,4;2,7;6,1;6,3:2,1;8,3;5,8;9,8;7,2;0,3;9,4;4,8;7,1;6,8#\n","S:P0;0,0;0#","G:P0;0,0;0;0;100;0;0:4,3,0;5,4,0;3,8,0;2,7,0;6,1,0;5,8,0;1,4,0;1,6,0#", "C:0,5:51224:824#","G:P0;0,0;0;0;100;0;0:4,3,0;5,4,0;3,8,0;2,7,0;6,1,0;5,8,0;1,4,0;1,6,0#","G:P0;0,1;2;0;100;0;0:4,3,0;5,4,0;3,8,0;2,7,0;6,1,0;5,8,0;1,4,0;1,6,0#")
# This is just game specific test data
while True:
c, sockadd = listener.accept() # Establish connection with client.
print 'incoming connection, established with ', sockadd
i = 0 # Just a counter.
while i<len(statement):
try:
self.write_data(statement[i], sockadd[0])
time.sleep(1) # The game sends updates every second to the clients
i = i + 1
#print listener.recv(1024) -- this line doesn't work. gives an error
except:
print "Error binding client"
c.close() # Close the connection
return
except:
print "Error Occurred"
I'm going to answer it because I got some help and figured it out.
The most basic thing I can do is to use the client connection which is c for this purpose. In here, instead of the commented line data=listener.recv(1024) I should have used data= c.recv(1024). Now it works.
Another way is to use SocketServers with a StreamingRequestHandler. While this is ideal for usage of typical servers, if a lot of objects are involved it could reduce the flexibility.
Maybe someone here will have a response for this thing which is just driving me insane.
To make it simple, I'm making a kind of proxy. Whenever it receives something, it forwards everything to a server, and sends back the response. So there is one socket always listening on port 4557 for clients, and for each incoming connection, there is a new socket created on a random port to connect to the server port 4556.
Clients <==> Proxy <==> Server
Also, there another socket which is instantiated and listening for requests coming from the server and to be forwarded to the corresponding client.
Here is an example:
Client A connects to proxy on port 4557
Proxy creates a socket to Server on port 4556
Along with that, it creates a socket listening on port 40100
Client sends stuff, forwarded to Server
Client disconnects. Close client connection and socket to server
Some time later, Server sends stuff to proxy on port 40100
Everything's forwarded to Client A (port 40100 corresponding to Client A)
And so on..
So far in my tests, I use a simple python script for sending a unique tcp packet to the proxy, along with a dump server showing received data and echoing back.
So the issue is that when a connection to the proxy is closed, the connection to the Server should also be closed with "sock.close()". However it just seems to be completely ignored. The socket remains as ESTABLISHED.
About the code now.
A few notes.
DTN and Node are respectively Server and Clients.
runCallback is called in a loop until thread dies.
finalCallback is called when the thread is dying.
Associations between remote hosts (Client), proxy ports (to Server) and proxies are kept in the dictionaries: TCPProxyHostRegister (RemoteHost => Proxy), TCPProxyPortRegister (Port => Proxy), TCPPortToHost (Port => RemoteHost).
The first class is TCPListenerThread.
It just listen on a specific port and instantiate proxies (one for each Client=>Server couple and Server=>Client couple) and forward them connections.
class TCPListenerThread(StoppableThread):
def __init__(self, tcp_port):
StoppableThread.__init__(self)
self.tcp_port = tcp_port
self.sock = socket.socket( socket.AF_INET, # Internet
socket.SOCK_STREAM ) # tcp
self.sock.bind( (LOCAL_ADDRESS, self.tcp_port) )
self.sock.listen(1)
def runCallback(self):
print "Listen on "+str(self.tcp_port)+".."
conn, addr = self.sock.accept()
if isFromDTN(addr):
tcpProxy = getProxyFromPort(tcp_port)
if not tcpProxy:
tcpProxy = TCPProxy(host, True)
else:
host = addr[0]
tcpProxy = getProxyFromHost(host)
if not tcpProxy:
tcpProxy = TCPProxy(host, False)
tcpProxy.handle(conn)
def finalCallback(self):
self.sock.close()
Now comes the TCP Proxy:
It associates a remote host (Client) with a port connecting to Server.
If it's a connection coming from a new Client, it will create a new listener (see above) for the Server and create a socket ready to forward everything to Server.
class TCPProxy():
def __init__(self, remote, isFromDTN):
#remote = port for Server or Remote host for Client
self.isFromDTN = isFromDTN
self.conn = None
#add itself to proxy registries
#If listening from a node
if not isFromDTN:
#Set node remote host
self.remoteHost = remote
TCPProxyHostRegister[self.remoteHost] = self
#Set port to DTN interface + listener
self.portToDTN = getNewTCPPort()
TCPPortToHost[self.portToDTN] = self.remoteHost
newTCPListenerThread(self.portToDTN)
#Or from DTN
else:
self.portToDTN = remote
TCPProxyPortRegister[self.portToDTN] = self
self.remoteHost = getRemoteHostFromPortTCP(self.portToDTN)
def handle(self, conn):
print "New connection!"
#shouldn't happen, but eh
if self.conn != None:
self.closeConnections()
self.conn = conn
#init socket with remote
self.sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
#self.sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
if self.isFromDTN:
self.sock.connect((self.remoteHost, 4556)) #TODO: handle dynamic port..
else:
self.sock.connect((DTN_Address, DTN_TCPPort))
#handle connection in a thread
self.handlerThread = newTCPHandlerThread(self)
#handle reply in a therad
self.replyThread = newTCPReplyThread(self)
def closeConnections(self):
try:
if self.conn != None:
print "Close connections!"
self.sock.close()
self.conn.close()
self.conn = None
self.handlerThread.kill()
self.replyThread.kill()
except Exception, err:
print str(err)
#pass
def forward(self, data):
print "TCP forwarding data: "+data
self.sock.send(data)
def forwardBack(self, data):
print "TCP forwarding data back: "+data
self.conn.send(data)
In this proxy class, I instantiate two classes, TCPHandlerThread and TCPReplyThread. They are responsible for forwarding to Server, and forwarding back to Client, respectively.
class TCPHandlerThread(StoppableThread):
def __init__(self, proxy):
StoppableThread.__init__(self)
self.proxy = proxy
def runCallback(self):
test = False
while 1:
data = self.proxy.conn.recv(BUFFER_SIZE)
if test:
self.proxy.sock.close()
test = True
if not data:
break
print "TCP received data:", data
self.proxy.forward(data)
self.kill()
def finalCallback(self):
self.proxy.closeConnections()
class TCPReplyThread(StoppableThread):
def __init__(self, proxy):
StoppableThread.__init__(self)
self.proxy = proxy
def runCallback(self):
while 1:
data = self.proxy.sock.recv(BUFFER_SIZE)
if not data:
break
print "TCP received back data: "+data
self.proxy.forwardBack(data)
self.kill()
def finalCallback(self):
self.proxy.closeConnections()
You see that whenever a connection is closed, the thread dies and the other connection (Client/Server to proxy or Proxy to Server/Client) should be closed in Proxy.closeConnections()
I noticed that when closeConnections() is "data = self.proxy.conn.recv(BUFFER_SIZE)", it goes well, but when it's called even right after the latter statement, it goes wrong.
I wiresharked TCP, and the proxy doesn't send any "bye signal". The socket state doesn't go to TIME_WAIT or whatever, it just remains ESTABLISHED.
Also, I tested it on Windows and Ubuntu.
On Windows it goes exactly as I explained
On Ubuntu, it works well for usually (not always), 2 connections, and the third time I connect with the same client in exactly the same way to the proxy, it goes wrong again exactly as explained.
Here are the three files i'm using so that you can have a look at the whole code. I'm sorry the proxy file might not be really easy to read. Was SUPPOSED to be a quick dev.
http://hognerud.net/stackoverflow/
Thanks in advance..
It's surely something stupid. Please don't hit me too hard when you see it :(
First I'm sorry that I currently have not the time to actually run and test your code.
But the idea came to my mind, that your problem might actually have something todo with using blocking mode vs. non-blocking mode on the socket. In that case you should checkout the "socket" module help in the python documentation, especially socket.setblocking().
My guess is, that the proxy.conn.recv() function only returns, when actually BUFFER_SIZE bytes where received by the socket. Because of this the thread is blocked until enough data was received and therefore the socket doesn't get closed.
As I said first, this is currently just a guess, so please don't vote me down if it doesn't solve the problem...