I'm trying to create a CDF but at the end of the graph, there is a vertical line, shown below:
I've read that his is because matplotlib uses the end of the bins to draw the vertical lines, which makes sense, so I added into my code as:
bins = sorted(X) + [np.inf]
where X is the data set I'm using and set the bin size to this when plotting:
plt.hist(X, bins = bins, cumulative = True, histtype = 'step', color = 'b')
This does remove the line at the end and produce the desired effect, however when I normalise this graph now it produces an error:
ymin = max(ymin*0.9, minimum) if not input_empty else minimum
UnboundLocalError: local variable 'ymin' referenced before assignment
Is there anyway to either normalise the data with
bins = sorted(X) + [np.inf]
in my code or is there another way to remove the line on the graph?
An alternative way to plot a CDF would be as follows (in my example, X is a bunch of samples drawn from the unit normal):
import numpy as np
import matplotlib.pyplot as plt
X = np.random.randn(10000)
n = np.arange(1,len(X)+1) / np.float(len(X))
Xs = np.sort(X)
fig, ax = plt.subplots()
ax.step(Xs,n)
I needed a solution where I would not need to alter the rest of my code (using plt.hist(...) or, with pandas, dataframe.plot.hist(...)) and that I could reuse easily many times in the same jupyter notebook.
I now use this little helper function to do so:
def fix_hist_step_vertical_line_at_end(ax):
axpolygons = [poly for poly in ax.get_children() if isinstance(poly, mpl.patches.Polygon)]
for poly in axpolygons:
poly.set_xy(poly.get_xy()[:-1])
Which can be used like this (without pandas):
import numpy as np
import matplotlib as mpl
import matplotlib.pyplot as plt
X = np.sort(np.random.randn(1000))
fig, ax = plt.subplots()
plt.hist(X, bins=100, cumulative=True, density=True, histtype='step')
fix_hist_step_vertical_line_at_end(ax)
Or like this (with pandas):
import numpy as np
import pandas as pd
import matplotlib as mpl
import matplotlib.pyplot as plt
df = pd.DataFrame(np.random.randn(1000))
fig, ax = plt.subplots()
ax = df.plot.hist(ax=ax, bins=100, cumulative=True, density=True, histtype='step', legend=False)
fix_hist_step_vertical_line_at_end(ax)
This works well even if you have multiple cumulative density histograms on the same axes.
Warning: this may not lead to the wanted results if your axes contain other patches falling under the mpl.patches.Polygon category. That was not my case so I prefer using this little helper function in my plots.
Assuming that your intentions are pure aesthetic, add a vertical line, of the same color as your plot background:
ax.axvline(x = value, color = 'white', linewidth = 2)
Where "value" stands for the right extreme of the rightmost bin.
Related
The code below takes a dataframe filters by a string in a column and then plot the values of another column
I plot the values of the using histogram and than worked fine until I added Mean, Median and standard deviation but now I am just getting an empty graph where instead the all of the variables mentioned below should be plotted in one graph together with their labels
import pandas as pd
import matplotlib.pyplot as plt
from matplotlib import pyplot as plt
from matplotlib import pyplot as plt
import numpy as np
df = pd.read_csv(r'C:/Users/output.csv', delimiter=";", encoding='unicode_escape')
df['Plot_column'] = df['Plot_column'].str.split(',').str[0]
df['Plot_column'] = df['Plot_column'].astype('int64', copy=False)
X=df[df['goal_colum']=='start running']['Plot_column'].values
dev_x= X
mean_=np.mean(dev_x)
median_=np.median(dev_x)
standard_=np.std(dev_x)
plt.hist(dev_x, bins=5)
plt.plot(mean_, label='Mean')
plt.plot(median_, label='Median')
plt.plot(standard_, label='Std Deviation')
plt.title('Data')
https://matplotlib.org/3.1.1/gallery/statistics/histogram_features.html
There are two major ways to plot in matplotlib, pyplot (the easy way) and ax (the hard way). Ax lets you customize your plot more and you should work to move towards that. Try something like the following
num_bins = 50
fig, ax = plt.subplots()
# the histogram of the data
n, bins, patches = ax.hist(dev_x, num_bins, density=1)
ax.plot(np.mean(dev_x))
ax.plot(np.median(dev_x))
ax.plot(np.std(dev_x))
# Tweak spacing to prevent clipping of ylabel
fig.tight_layout()
plt.show()
I frequently find myself working in log units for my plots, for example taking np.log10(x) of data before binning it or creating contour plots. The problem is, when I then want to make the plots presentable, the axes are in ugly log units, and the tick marks are evenly spaced.
If I let matplotlib do all the conversions, i.e. by setting ax.set_xaxis('log') then I get very nice looking axes, however I can't do that to my data since it is e.g. already binned in log units. I could manually change the tick labels, but that wouldn't make the tick spacing logarithmic. I suppose I could also go and manually specify the position of every minor tick such it had log spacing, but is that the only way to achieve this? That is a bit tedious so it would be nice if there is a better way.
For concreteness, here is a plot:
I want to have the tick labels as 10^x and 10^y (so '1' is '10', 2 is '100' etc.), and I want the minor ticks to be drawn as ax.set_xaxis('log') would draw them.
Edit: For further concreteness, suppose the plot is generated from an image, like this:
import matplotlib.pyplot as plt
import scipy.misc
img = scipy.misc.face()
x_range = [-5,3] # log10 units
y_range = [-55, -45] # log10 units
p = plt.imshow(img,extent=x_range+y_range)
plt.show()
and all we want to do is change the axes appearance as I have described.
Edit 2: Ok, ImportanceOfBeingErnest's answer is very clever but it is a bit more specific to images than I wanted. I have another example, of binned data this time. Perhaps their technique still works on this, though it is not clear to me if that is the case.
import numpy as np
import pandas as pd
import datashader as ds
from matplotlib import pyplot as plt
import scipy.stats as sps
v1 = sps.lognorm(loc=0, scale=3, s=0.8)
v2 = sps.lognorm(loc=0, scale=1, s=0.8)
x = np.log10(v1.rvs(100000))
y = np.log10(v2.rvs(100000))
x_range=[np.min(x),np.max(x)]
y_range=[np.min(y),np.max(y)]
df = pd.DataFrame.from_dict({"x": x, "y": y})
#------ Aggregate the data ------
cvs = ds.Canvas(plot_width=30, plot_height=30, x_range=x_range, y_range=y_range)
agg = cvs.points(df, 'x', 'y')
# Create contour plot
fig = plt.figure()
ax = fig.add_subplot(111)
ax.contourf(agg, extent=x_range+y_range)
ax.set_xlabel("x")
ax.set_ylabel("y")
plt.show()
The general answer to this question is probably given in this post:
Can I mimic a log scale of an axis in matplotlib without transforming the associated data?
However here an easy option might be to scale the content of the axes and then set the axes to a log scale.
A. image
You may plot your image on a logarithmic scale but make all pixels the same size in log units. Unfortunately imshow does not allow for such kind of image (any more), but one may use pcolormesh for that purpose.
import numpy as np
import matplotlib.pyplot as plt
import scipy.misc
img = scipy.misc.face()
extx = [-5,3] # log10 units
exty = [-45, -55] # log10 units
x = np.logspace(extx[0],extx[-1],img.shape[1]+1)
y = np.logspace(exty[0],exty[-1],img.shape[0]+1)
X,Y = np.meshgrid(x,y)
c = img.reshape((img.shape[0]*img.shape[1],img.shape[2]))/255.0
m = plt.pcolormesh(X,Y,X[:-1,:-1], color=c, linewidth=0)
m.set_array(None)
plt.gca().set_xscale("log")
plt.gca().set_yscale("log")
plt.show()
B. contour
The same concept can be used for a contour plot.
import numpy as np
from matplotlib import pyplot as plt
x = np.linspace(-1.1,1.9)
y = np.linspace(-1.4,1.55)
X,Y = np.meshgrid(x,y)
agg = np.exp(-(X**2+Y**2)*2)
fig, ax = plt.subplots()
plt.gca().set_xscale("log")
plt.gca().set_yscale("log")
exp = lambda x: 10.**(np.array(x))
cf = ax.contourf(exp(X), exp(Y),agg, extent=exp([x.min(),x.max(),y.min(),y.max()]))
ax.set_xlabel("x")
ax.set_ylabel("y")
plt.show()
I am using matplotlib to create the plots. I have to identify each plot with a different color which should be automatically generated by Python.
Can you please give me a method to put different colors for different plots in the same figure?
Matplotlib does this by default.
E.g.:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.show()
And, as you may already know, you can easily add a legend:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.legend(['y = x', 'y = 2x', 'y = 3x', 'y = 4x'], loc='upper left')
plt.show()
If you want to control the colors that will be cycled through:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.gca().set_color_cycle(['red', 'green', 'blue', 'yellow'])
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.legend(['y = x', 'y = 2x', 'y = 3x', 'y = 4x'], loc='upper left')
plt.show()
If you're unfamiliar with matplotlib, the tutorial is a good place to start.
Edit:
First off, if you have a lot (>5) of things you want to plot on one figure, either:
Put them on different plots (consider using a few subplots on one figure), or
Use something other than color (i.e. marker styles or line thickness) to distinguish between them.
Otherwise, you're going to wind up with a very messy plot! Be nice to who ever is going to read whatever you're doing and don't try to cram 15 different things onto one figure!!
Beyond that, many people are colorblind to varying degrees, and distinguishing between numerous subtly different colors is difficult for more people than you may realize.
That having been said, if you really want to put 20 lines on one axis with 20 relatively distinct colors, here's one way to do it:
import matplotlib.pyplot as plt
import numpy as np
num_plots = 20
# Have a look at the colormaps here and decide which one you'd like:
# http://matplotlib.org/1.2.1/examples/pylab_examples/show_colormaps.html
colormap = plt.cm.gist_ncar
plt.gca().set_prop_cycle(plt.cycler('color', plt.cm.jet(np.linspace(0, 1, num_plots))))
# Plot several different functions...
x = np.arange(10)
labels = []
for i in range(1, num_plots + 1):
plt.plot(x, i * x + 5 * i)
labels.append(r'$y = %ix + %i$' % (i, 5*i))
# I'm basically just demonstrating several different legend options here...
plt.legend(labels, ncol=4, loc='upper center',
bbox_to_anchor=[0.5, 1.1],
columnspacing=1.0, labelspacing=0.0,
handletextpad=0.0, handlelength=1.5,
fancybox=True, shadow=True)
plt.show()
Setting them later
If you don't know the number of the plots you are going to plot you can change the colours once you have plotted them retrieving the number directly from the plot using .lines, I use this solution:
Some random data
import matplotlib.pyplot as plt
import numpy as np
fig1 = plt.figure()
ax1 = fig1.add_subplot(111)
for i in range(1,15):
ax1.plot(np.array([1,5])*i,label=i)
The piece of code that you need:
colormap = plt.cm.gist_ncar #nipy_spectral, Set1,Paired
colors = [colormap(i) for i in np.linspace(0, 1,len(ax1.lines))]
for i,j in enumerate(ax1.lines):
j.set_color(colors[i])
ax1.legend(loc=2)
The result is the following:
TL;DR No, it can't be done automatically. Yes, it is possible.
import matplotlib.pyplot as plt
my_colors = plt.rcParams['axes.prop_cycle']() # <<< note that we CALL the prop_cycle
fig, axes = plt.subplots(2,3)
for ax in axes.flatten(): ax.plot((0,1), (0,1), **next(my_colors))
Each plot (axes) in a figure (figure) has its own cycle of colors — if you don't force a different color for each plot, all the plots share the same order of colors but, if we stretch a bit what "automatically" means, it can be done.
The OP wrote
[...] I have to identify each plot with a different color which should be automatically generated by [Matplotlib].
But... Matplotlib automatically generates different colors for each different curve
In [10]: import numpy as np
...: import matplotlib.pyplot as plt
In [11]: plt.plot((0,1), (0,1), (1,2), (1,0));
Out[11]:
So why the OP request? If we continue to read, we have
Can you please give me a method to put different colors for different plots in the same figure?
and it make sense, because each plot (each axes in Matplotlib's parlance) has its own color_cycle (or rather, in 2018, its prop_cycle) and each plot (axes) reuses the same colors in the same order.
In [12]: fig, axes = plt.subplots(2,3)
In [13]: for ax in axes.flatten():
...: ax.plot((0,1), (0,1))
If this is the meaning of the original question, one possibility is to explicitly name a different color for each plot.
If the plots (as it often happens) are generated in a loop we must have an additional loop variable to override the color automatically chosen by Matplotlib.
In [14]: fig, axes = plt.subplots(2,3)
In [15]: for ax, short_color_name in zip(axes.flatten(), 'brgkyc'):
...: ax.plot((0,1), (0,1), short_color_name)
Another possibility is to instantiate a cycler object
from cycler import cycler
my_cycler = cycler('color', ['k', 'r']) * cycler('linewidth', [1., 1.5, 2.])
actual_cycler = my_cycler()
fig, axes = plt.subplots(2,3)
for ax in axes.flat:
ax.plot((0,1), (0,1), **next(actual_cycler))
Note that type(my_cycler) is cycler.Cycler but type(actual_cycler) is itertools.cycle.
I would like to offer a minor improvement on the last loop answer given in the previous post (that post is correct and should still be accepted). The implicit assumption made when labeling the last example is that plt.label(LIST) puts label number X in LIST with the line corresponding to the Xth time plot was called. I have run into problems with this approach before. The recommended way to build legends and customize their labels per matplotlibs documentation ( http://matplotlib.org/users/legend_guide.html#adjusting-the-order-of-legend-item) is to have a warm feeling that the labels go along with the exact plots you think they do:
...
# Plot several different functions...
labels = []
plotHandles = []
for i in range(1, num_plots + 1):
x, = plt.plot(some x vector, some y vector) #need the ',' per ** below
plotHandles.append(x)
labels.append(some label)
plt.legend(plotHandles, labels, 'upper left',ncol=1)
**: Matplotlib Legends not working
Matplot colors your plot with different colors , but incase you wanna put specific colors
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x,color='blue')
plt.plot(x, 3 * x,color='red')
plt.plot(x, 4 * x,color='green')
plt.show()
from mpl_toolkits.mplot3d import Axes3D
import matplotlib.pyplot as plt
import numpy as np
from skspatial.objects import Line, Vector
for count in range(0,len(LineList),1):
Line_Color = np.random.rand(3,)
Line(StartPoint,EndPoint)).plot_3d(ax,c="Line"+str(count),label="Line"+str(count))
plt.legend(loc='lower left')
plt.show(block=True)
The above code might help you to add 3D lines with different colours in a randomized fashion. Your colored lines can also be referenced with a help of a legend as mentioned in the label="... " parameter.
Honestly, my favourite way to do this is pretty simple: Now this won't work for an arbitrarily large number of plots, but it will do you up to 1163. This is by using the map of all matplotlib's named colours and then selecting them at random.
from random import choice
import matplotlib.pyplot as plt
from matplotlib.colors import mcolors
# Get full named colour map from matplotlib
colours = mcolors._colors_full_map # This is a dictionary of all named colours
# Turn the dictionary into a list
color_lst = list(colours.values())
# Plot using these random colours
for n, plot in enumerate(plots):
plt.scatter(plot[x], plot[y], color=choice(color_lst), label=n)
I have been trying to stipple contour plots to show locations where values are statistically significant. However, when I do this in subplots where the significance is the same, the stippling looks different based on the random location of the filled stipples. I have reproduced the problem below. Is there a way to fix the location of the stipples so that they look the same when plotted? Or is there a better way to stipple plots?
These 2 subplots are plotting the exact same data, but the stipples look different.
import numpy as np
from matplotlib import pyplot as plt
#Create some random data
x = np.arange(0,100,1)
x,y = np.meshgrid(x,x)
stipp = 10*np.random.rand(len(x),len(x))
fig =plt.figure(figsize=(12,8))
ax1 = plt.subplot(121)
ax2 = plt.subplot(122)
#Plot stippling
ax1.contourf(x,y,stipp,[0,4],colors='none',hatches='.')
ax2.contourf(x,y,stipp,[0,4],colors='none',hatches='.')
plt.show()
So in case anyone wants to know, the best way to stipple multiple subplots with similar statistical significance is to use a scatter plot as recommended above instead of contouring. Just make sure to sample the data sparingly so you don't have a high density of dots next to each other.
import numpy as np
from matplotlib import pyplot as plt
#Create some random data
x = np.arange(0,100,1)
x,y = np.meshgrid(x,x)
stipp = 10*np.random.rand(len(x),len(x))
fig =plt.figure(figsize=(12,8))
ax1 = plt.subplot(121)
ax2 = plt.subplot(122)
#Plot stippling
ax1.scatter(x[(stipp<=4) & (stipp>=0)][::5],y[(stipp<=4) & (stipp>=0)][::5])
ax2.scatter(x[(stipp<=4) & (stipp>=0)][::5],y[(stipp<=4) & (stipp>=0)][::5])
plt.show()
I am using matplotlib to create the plots. I have to identify each plot with a different color which should be automatically generated by Python.
Can you please give me a method to put different colors for different plots in the same figure?
Matplotlib does this by default.
E.g.:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.show()
And, as you may already know, you can easily add a legend:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.legend(['y = x', 'y = 2x', 'y = 3x', 'y = 4x'], loc='upper left')
plt.show()
If you want to control the colors that will be cycled through:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.gca().set_color_cycle(['red', 'green', 'blue', 'yellow'])
plt.plot(x, x)
plt.plot(x, 2 * x)
plt.plot(x, 3 * x)
plt.plot(x, 4 * x)
plt.legend(['y = x', 'y = 2x', 'y = 3x', 'y = 4x'], loc='upper left')
plt.show()
If you're unfamiliar with matplotlib, the tutorial is a good place to start.
Edit:
First off, if you have a lot (>5) of things you want to plot on one figure, either:
Put them on different plots (consider using a few subplots on one figure), or
Use something other than color (i.e. marker styles or line thickness) to distinguish between them.
Otherwise, you're going to wind up with a very messy plot! Be nice to who ever is going to read whatever you're doing and don't try to cram 15 different things onto one figure!!
Beyond that, many people are colorblind to varying degrees, and distinguishing between numerous subtly different colors is difficult for more people than you may realize.
That having been said, if you really want to put 20 lines on one axis with 20 relatively distinct colors, here's one way to do it:
import matplotlib.pyplot as plt
import numpy as np
num_plots = 20
# Have a look at the colormaps here and decide which one you'd like:
# http://matplotlib.org/1.2.1/examples/pylab_examples/show_colormaps.html
colormap = plt.cm.gist_ncar
plt.gca().set_prop_cycle(plt.cycler('color', plt.cm.jet(np.linspace(0, 1, num_plots))))
# Plot several different functions...
x = np.arange(10)
labels = []
for i in range(1, num_plots + 1):
plt.plot(x, i * x + 5 * i)
labels.append(r'$y = %ix + %i$' % (i, 5*i))
# I'm basically just demonstrating several different legend options here...
plt.legend(labels, ncol=4, loc='upper center',
bbox_to_anchor=[0.5, 1.1],
columnspacing=1.0, labelspacing=0.0,
handletextpad=0.0, handlelength=1.5,
fancybox=True, shadow=True)
plt.show()
Setting them later
If you don't know the number of the plots you are going to plot you can change the colours once you have plotted them retrieving the number directly from the plot using .lines, I use this solution:
Some random data
import matplotlib.pyplot as plt
import numpy as np
fig1 = plt.figure()
ax1 = fig1.add_subplot(111)
for i in range(1,15):
ax1.plot(np.array([1,5])*i,label=i)
The piece of code that you need:
colormap = plt.cm.gist_ncar #nipy_spectral, Set1,Paired
colors = [colormap(i) for i in np.linspace(0, 1,len(ax1.lines))]
for i,j in enumerate(ax1.lines):
j.set_color(colors[i])
ax1.legend(loc=2)
The result is the following:
TL;DR No, it can't be done automatically. Yes, it is possible.
import matplotlib.pyplot as plt
my_colors = plt.rcParams['axes.prop_cycle']() # <<< note that we CALL the prop_cycle
fig, axes = plt.subplots(2,3)
for ax in axes.flatten(): ax.plot((0,1), (0,1), **next(my_colors))
Each plot (axes) in a figure (figure) has its own cycle of colors — if you don't force a different color for each plot, all the plots share the same order of colors but, if we stretch a bit what "automatically" means, it can be done.
The OP wrote
[...] I have to identify each plot with a different color which should be automatically generated by [Matplotlib].
But... Matplotlib automatically generates different colors for each different curve
In [10]: import numpy as np
...: import matplotlib.pyplot as plt
In [11]: plt.plot((0,1), (0,1), (1,2), (1,0));
Out[11]:
So why the OP request? If we continue to read, we have
Can you please give me a method to put different colors for different plots in the same figure?
and it make sense, because each plot (each axes in Matplotlib's parlance) has its own color_cycle (or rather, in 2018, its prop_cycle) and each plot (axes) reuses the same colors in the same order.
In [12]: fig, axes = plt.subplots(2,3)
In [13]: for ax in axes.flatten():
...: ax.plot((0,1), (0,1))
If this is the meaning of the original question, one possibility is to explicitly name a different color for each plot.
If the plots (as it often happens) are generated in a loop we must have an additional loop variable to override the color automatically chosen by Matplotlib.
In [14]: fig, axes = plt.subplots(2,3)
In [15]: for ax, short_color_name in zip(axes.flatten(), 'brgkyc'):
...: ax.plot((0,1), (0,1), short_color_name)
Another possibility is to instantiate a cycler object
from cycler import cycler
my_cycler = cycler('color', ['k', 'r']) * cycler('linewidth', [1., 1.5, 2.])
actual_cycler = my_cycler()
fig, axes = plt.subplots(2,3)
for ax in axes.flat:
ax.plot((0,1), (0,1), **next(actual_cycler))
Note that type(my_cycler) is cycler.Cycler but type(actual_cycler) is itertools.cycle.
I would like to offer a minor improvement on the last loop answer given in the previous post (that post is correct and should still be accepted). The implicit assumption made when labeling the last example is that plt.label(LIST) puts label number X in LIST with the line corresponding to the Xth time plot was called. I have run into problems with this approach before. The recommended way to build legends and customize their labels per matplotlibs documentation ( http://matplotlib.org/users/legend_guide.html#adjusting-the-order-of-legend-item) is to have a warm feeling that the labels go along with the exact plots you think they do:
...
# Plot several different functions...
labels = []
plotHandles = []
for i in range(1, num_plots + 1):
x, = plt.plot(some x vector, some y vector) #need the ',' per ** below
plotHandles.append(x)
labels.append(some label)
plt.legend(plotHandles, labels, 'upper left',ncol=1)
**: Matplotlib Legends not working
Matplot colors your plot with different colors , but incase you wanna put specific colors
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(10)
plt.plot(x, x)
plt.plot(x, 2 * x,color='blue')
plt.plot(x, 3 * x,color='red')
plt.plot(x, 4 * x,color='green')
plt.show()
from mpl_toolkits.mplot3d import Axes3D
import matplotlib.pyplot as plt
import numpy as np
from skspatial.objects import Line, Vector
for count in range(0,len(LineList),1):
Line_Color = np.random.rand(3,)
Line(StartPoint,EndPoint)).plot_3d(ax,c="Line"+str(count),label="Line"+str(count))
plt.legend(loc='lower left')
plt.show(block=True)
The above code might help you to add 3D lines with different colours in a randomized fashion. Your colored lines can also be referenced with a help of a legend as mentioned in the label="... " parameter.
Honestly, my favourite way to do this is pretty simple: Now this won't work for an arbitrarily large number of plots, but it will do you up to 1163. This is by using the map of all matplotlib's named colours and then selecting them at random.
from random import choice
import matplotlib.pyplot as plt
from matplotlib.colors import mcolors
# Get full named colour map from matplotlib
colours = mcolors._colors_full_map # This is a dictionary of all named colours
# Turn the dictionary into a list
color_lst = list(colours.values())
# Plot using these random colours
for n, plot in enumerate(plots):
plt.scatter(plot[x], plot[y], color=choice(color_lst), label=n)