Title says all. I have a client and a server setup, but they only work with localhost. How can I connect to the socket from a different network?
Client
# Echo client program
import socket
print "Client"
HOST = "localhost" # Symbolic name meaning all available interfaces
PORT = 5001
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((HOST,PORT))
while True:
data2 = raw_input()
s.sendall(data2)
Server
# Echo server program
import socket
print "Server"
HOST = "" # Symbolic name meaning all available interfaces
PORT = 5001 # Arbitrary non-privileged port
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((HOST, PORT))
s.listen(1)
conn, addr = s.accept()
print 'Connected by', addr
while 1:
data = conn.recv(1024)
print data
if data == "Ping":
print "Pong!"
conn.close()
Check your public ip address using online tools like http://whatismyipaddress.com/
Check your local ip address using ipconfig -a in windows ifconfig in linux.
Now if you are behind a dsl router (generally, you are) these addresses are completely different. So you have to tell your router to send whenever a connection attemp received to a TCP port XXXX , forward it to "My Machine" (called Port Forwarding ). Although port forwarding settings are similar in most routers, there is no standard (Generally under NAT / Port Forwarding menu items on your router web configuration interface ). You may have to search instructions for your specific model.It's a good idea to set your computer to use a static ip address before port forwarding.Otherwise, the settings will be invalid if your computer is assigned another IP adress via DHCP.
If port forwarding is successful, now you only have to set your client application to connect to your public ip address. In your specific situation it's HOST = "X.X.X.X" in your client source code. Check if port forwarding works with a socket tester application you downloaded from somewhere. ( Don't test it with your experimental code, use an application you are sure that it's working). All did not work, check out the note below. It's the last resort ,though.
Note : Some ISP's put their clients behind an extra firewall for security. A simple method to detect if this is the situation is , your Wan ip address you see in your router web interface will be different from what you see in online tools like whatsmyip. In this situation no matter what you do , you will not be able to connect. You have to call your ISP and tell them to disable firewall for your connection . You may have some difficulties to explain them what you are talking about :).
Related
I want to create streaming videos by using a socket. I need to know how I can find the port number address.
My code that I wrote to create a client:
# create socket
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
host_ip = '192.168.0.165' # paste your server ip address here
port =
client_socket.connect((host_ip, port)) # a tuple
data = b""
payload_size = struct.calcsize("Q") # Q: unsigned long long integer(8 bytes)
Can you post the code from your service app? (or name the service app) Usually you declare the port in the service somewhere. If its prebuilt, it could be in a configuration file.
You can run cmd.exe and type netstat to check your port activity. Or go to your firewalls inbound/outbound rules. Typically if its a prebuilt app it will create a firewall rule with associated port so the firewall does not freak out when connections come in to that port.
But otherwise there is not enough information here for me to give a complete answer.
A project I am working on has an Android app as a front-end and a Python program that would be used as the back-end.
I want to send data from the Android app (primarily images) to the Python program, do some processing and send the result back to the Android app.
I have found numerous tutorials that suggest using the socket module in python to create the server side, but all tutorials show the server on local network only (For testing purposes I created the client side also in Python, but it would be converted to Java later on)
The server code:
from requests import get
import socket
public_ip = get('https://api.ipify.org').text
print('My public IP address is: {}'.format(public_ip))
# getting the hostname by socket.gethostname() method
hostname = socket.gethostname()
# getting the IP address using socket.gethostbyname() method
local_ip = socket.gethostbyname(hostname)
# printing the hostname and ip_address
print(f"Hostname: {hostname}")
print(f"IP Address: {local_ip}")
#
HOST = local_ip
PORT = 80 # Port to listen on (non-privileged ports are > 1023)
with socket.socket(family=socket.AF_INET, type=socket.SOCK_STREAM, proto=0) as s:
s.bind((HOST, PORT))
s.listen()
conn, addr = s.accept()
with conn:
print('Connected by', addr)
while True:
data = conn.recv(1024).decode('utf-8')
if not data:
break
conn.sendall(data.encode('utf-8'))
The client code:
import socket
HOST = '…' # I modify it to the server's public IP address, as printed from the server code
PORT = 80 # The port used by the server
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
with socket.create_connection((HOST, PORT)) as s:
s.sendall(b'Hello, world')
data = s.recv(1024)
print('Received', repr(data))
Using the code above, if I try using any port other than 80 I get ConnectionRefusedError: [Errno 111] Connection refused. And for port 80, I get TimeoutError: [Errno 110] Connection timed out.
In both cases, I try to connect from a device on another network.
I tried to use the ping command in Windows CMD to check the connection to the server, and I get 'connection refused message'.
I understand that the Firewall is what probably blocks the connection, but I don't know how to bypass it. I added a new rule in the Inbound Rules section (as suggested on other websites) but for no avail… The results were the same.
How can I make the connection between remote devices on different networks?
Thanks in advance ☺
In order to connect to your server using a TCP socket connection, you need to make sure your server can listen on a port on a publically available IP address.
If the External IP address is assigned to your computer directly,
and if you run the server code on that computer, then the TCP port opened by the server code should be available on the internet.
However, IP addresses are often assigned to a modem/router in home networks,
instead of assigning them to any connected device directly.
To find out if your External IP address is assigned to the computer directly you can use tools that your OS support (eg. ipconfig on windows). If you can see the IP address returned by api.ipify.org, then it means your computer is connected directly. You can change your code to connect using publically exposed IP:
HOST = public_ip
If this is successful means your computer is assigned an external address directly. Which is highly unlikely.
There are several workarounds for this problem though:
1) Configure your router to forward port
Configure your router to forward all connections to it's external TCP port, to an internal host in your network which is assigned to your computer. Please find instructions how it is done for your router.
2) Setup a remote proxy
If you don't have permission to change your router settings you can set up a remote proxy listening on the TCP port. While there is a number of ways of doing this, very popular is to set up a remote SSH tunnel, for that you need to have a server with SSH access and an external IP. Run this command:
ssh -R 80:localhost:8080 root#your-ssh-server-host
You can also use a third-party service that exposes your private host on the internet like:
Ngrok (Commercial, with free plans)
Localtunnel (Open Source, can be self-hosted)
I am currently trying to learn how servers and clients work by making a trojan using python and sockets import, my client and server work perfectly on my computer but the moment I send the client to my other laptop the server does not connect. This happens even when i am on the same wifi network.
Server:
import socket
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
host = ''
port = 1234
server.bind((host, port))
server.listen(5)
run = True
client, addr = server.accept()
print('Got connection from',addr)
while run:
try:
data = input('>>>')
client.send(data.encode('UTF-8'))
msg = client.recv(1024)
print(msg.decode('UTF-8'))
except ConnectionResetError:
print('Client lost server connection')
print('Trying to connect . . .')
client, addr = server.accept()
print('Got connection from',addr)
Client:
import socket
import os
server = socket.socket()
host = '127.0.0.1'
port = 1234
run = True
server.connect((host,port))
while run:
msg = server.recv(1024)
os.popen(msg.decode('UTF-8'))
server.send('Client online . . .'.encode('UTF-8'))
Your client is connecting to IP 127.0.0.1 (the IPv4 loopback address), which will work only when the server is on the same machine as the client.
When the client and server are on different machines, but still on the same LAN network, the client needs to connect to the server's LAN IP instead. Use netstat or similar tool on the server machine to find its LAN IP. Or, simply have your server code print out its local IPs.
When the client is on another network, it needs to connect to the public WAN IP of the server's LAN router, and that router needs to have port forwarding configured on it to route incoming connections from its WAN IP/Port to the server's LAN IP/port. To get the WAN IP, you will have to look at your router's config, or simply query an external site, like https://api.ipify.org, https://api.my-ip.io/ip, etc from a machine on the LAN, like your server.
Update your client to take in the target host/IP from user input, then it will be able to handle all of these scenarios without having to use different code each time.
I am practicing socket programming using python. I am fimiliar with how to make a simple tcp server and client in local address but I want to know how to make it possible so that I can connect to my own computer from a client app that I built. What modifications do I have to make in this server script? or client?
server:
import socket
s = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
#The host is set to be the local machine.
address = ("127.0.0.1",1234)
s.bind(address)
s.listen(1)
c , addr = s.accept()
while True:
#do some stuff
c.close()
client:
import socket
s = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
address = ("127.0.0.1",1234)
s.connect(address)
while True:
#Do client stuff
s.close()
I'm not allowed to make comments yet. But if you have a client app on another device, you can make the HOST your machines IP that stores the server. IF you're using windows ENTER: ipconfig In your command line argument. I think that or Linux its if config. You should be able to set your address to your machines ip address in order to get the client to connect to your local machine. As you noted, localhost will not work.
Today, I have made my very first sockets program - I made a client and a server that message each other (kind of like a chat) using sockets. When using the internal IP as 'host', The connection is established, otherwise using the external IP, no connection is established.
Edit 1:
#Client
s = socket.socket()
host = '123.123.123.123'
port = 9999
s.connect((host, port))
#Server
host = ''
port = 9999
s = socket.socket()
s.bind((host, port))
s.listen(5)
connection, address = s.accept()
How will this work properly with, for example, a laptop? Since your IP changes each time you switch Wifi, how would I be able to create a program that would permanently work with this specific laptop?
I understand that I have to port-forward the specific port to a specific internal machine such as 192.168.0.5. but what if I'm using a laptop and I don't have access to the WIFI router. I wouldn't have access to every router a laptop uses.
I want the code to be permanently compatible.
Use DynDNS.com or NoIP.com portal. You install program on laptop which check your IP frequencly and sends current IP to portal which assigns this IP to your address like "my_laptop.noip.com". Then people can access your laptop using "my_laptop.noip.com" instead of IP address.
You always assign socket to IP of local network card (NIC) like WiFi. You can't assing to external IP. You have to config your router so requests to external IP:port will be send to your local IP:port. Of course Internet Provider routers can block your ports and it will not work.