I know this question has been asked few times, however, none of those solutions worked for me, so I thought of reposting the question in my context.
I have downloaded IDLE and Python2.7, and trying to run a python script. The above error is shown. I have verified that numpy is present somewhere in my comp., and I also tried adding 'path' (systems-advanced setting-environmental variables...), however, none of them worked.
Specific question is, is there a way I can install numpy from IDLE?.
Any inputs would greatly help to advance Science!.
Best,
Raman
As some of your comments above stated, you have not actually installed NumPy, as NumPy does not come with the base package of Python. My suggestion is to look into python package such as Anaconda or WinPython (only for windows) because these packages come preinstalled with your main python modules (Numpy, SciPy, etc..)
BUT, to just install NumPY, either open your command prompt or a bash shell you should be able to run,
pip install numpy
If you dont have the command pip just run,
python get-pip.py
Related
I have installed Python 3.10.6 and Pycharm community edition.
Everything was working until I tried to use numpy.
pip3 install numpy
import numpy as np
This is the error message:
pip3 install numpy
^^^^^^^
SyntaxError: invalid syntax
I also have tried to use pip install numpy and pip2 install numpy and pip3 install numpy scipy, but same error. Reinstalling both python and pycharm didn't help.
Ah, I understand your problem more specifically now. I also use PyCharm, and this same problem happened to me. It was very frustrating, and took me lots of reading to fix it.
PyCharm and other IDEs (integrated development environment) have something called 'run configurations' attached to each file you are working on. These run configurations basically specify which directory on the hard drive the file will use to read and execute your commands. The directory will contain the libraries you need to run your code.
They use these configurations to make it easy to quickly choose which directory (and which libraries) you want a certain file to use. You must specify these configurations in PyCharm for your specific file to run using Numpy. The great thing about PyCharm is that you can actually specify libraries you want to use within the IDE itself (and bypass having to specify a computer-native directory).
Here's How
Go to PyCharm Preferences
Expand the arrow that says 'Project: (your project name)'
Click on 'Python Interpreter'
Click the small '+' symbol
Type in 'numpy' to search for the library (package)
Click install package
Now try to run your file and it should be good to go!
Note that you must do this for each package you wish to use when accessing your file, and as you advance your programming knowledge it will be necessary to learn how to specify the directory you want PyCharm to run the Python Interpreter from. Since you are only using one library though, I think this solution should be fine for the time being.
You should install numpy with that command in your bash/zsh shell.
pip3 install numpy
the python script can then import it.
to test, run pip3 install numpy
then,
python to open a python shell.
and then you'll see
>>>
Type import numpy as np and be sure it imports. It should now.
It can be maddeningly confusing when first starting out with python and trying to figure out how to download libraries. Here are a few critical things I wish I understood before starting my Python journey, as well as the answer to your question.
Python is the language, and the files that support its functionality are located on the hard drive.
Libraries (like Numpy) can be thought of almost as interpreters (note that we are not using the computer definition of 'interpreter') and are stored alongside the Python files on the hard drive. They give Python more flexibility in terms of what it is able to do by increasing what commands Python is able to understand.
Once a library is downloaded, it must be imported to your Python script before you start writing library-specific commands. Importing a library tells Python: "Hey, I'm going to be writing some commands that you haven't seen before, but here is the library with the commands and what they want you to do in a way that you understand."
'pip' is Python's installer for these libraries.
Ex) I have a csv file that I want to read. I learn that Pandas has a csv reader function:
pandas.read_csv()
If I were to type this function in a script, Python would have no idea what I meant. But if I were to download Pandas, then import it into my script, Python would understand exactly what I'm saying.
How to Download Numpy
Assuming you are on Windows, open the terminal (command prompt) and run the command:
py -m pip install numpy
If you don't already have it, the terminal should have a few lines run and should end with something like 'numpy installed successfully'.
You can check to see if you have it by running the following command in your terminal:
py -m pip list
This command provides you with a list of all the downloaded libraries. You can check among them to make sure Numpy is downloaded.
Importing Libraries
Once you've downloaded the libraries you need, you need to import them into your script (the Python file where you are writing your code) in order for it to run properly. This is accomplished using the import command. One important thing to note is that you can import libraries and assign them a nickname using the as modifier.
Ex) Back to that csv file I want to read. I don't want to type 'pandas' in front of all the Pandas commands, so when I import it into the script I abbreviate it as 'pd':
import pandas as pd
pd.read_csv()
See the difference?
TL;DR for Your Scenario
Go to the terminal, and use the py -m pip list command to check if you have Numpy downloaded. If not, run the py -m pip install numpy command. Then go to your script with your actual python code, and import numpy with the import numpy command. Common Python practice is to import numpy as np, FYI.
Hope this clears things up.
It may say that you need to upgrade pip, which is fine, and it should give you a command to run that will upgrade pip to the newest version.
I'm having a problem with importing modules in python.
When I run my program in the command line it works perfectly fine.
However, when I try to run the same program in the python shell I am prompted with the following error:
ModuleNotFoundError: No module named 'matplotlib'
I already successfully installed matplotlib using 'python -m pip install matplotlib'.
I've read this can happen when you have two different versions of python installed; however, I don't.
I've uninstalled and reinstalled python and I still am having the same issue. I've also uninstalled and reinstalled matplotlib using pip.
I believe my problem is the module paths that python uses to search for imported modules are different between the two.
When I use the 'print(sys.path)' command in the python shell and the command line I get two different outputs.
Any help would be greatly appreciated!!!
The file different system paths between the python shell and the command line
You have two versions of python. I would recommend you to remove all pythons you have and go for anaconda https://www.anaconda.com/distribution/. It will fix your path problems and allow you to create environments with different versions of python. This is the least painful way also for future :) good luck.
I suppose, you have both of the Python versions installed on the same computer.
If that is so, then my answer would be to go inside both Python script folders and install matplotlib on both of them.
I have also faced that issue. My path includes pip of Python 3.7.1 and whenevwer I try to import modules on Python 3.4. It throws an error!
Maybe, you could add both of the Pythons to the path.
I encountered this same problem – python -c "import sklearn" would work just fine, but import sklearn inside a Python program failed. Both my one-liner and program was using the same Python version (version 3.8.10).
I eventually got the program to work by replacing the shebang line (originally #!/usr/bin/python) with #!/bin/env python.
I don't know why this worked exactly (sorry). Presumably some path got reset, and the module loaded from a different location, but it might help someone so I'm posting it here nontheless. (If you know more, feel free to edit this answer.)
I'm getting:
"ImportError: No module named builtins"
that has only started happening after I installed a later version of PsychoPy (an application that uses Python that is used for writing psychology experiments). I was not getting this problem with an older version
I tried doing "sudo pip install future" like someone else recommended for fixing a similar problem. However, when I do this I get an "invalid syntax" error, and don't know of any other way around the problem. I would greatly appreciate any help on this.
Edit
Could it be you enter the command into a Python prompt? You are supposed to enter that command on the command line of your operating system shell. Which means not inside Python.
Original Answer
Like Deesha already mentioned in their comment, you must install the future package into the Python environment you wish to run PsychoPy in, e.g. via pip:
pip install future
or via conda:
conda install future
This is because newer versions of PsychoPy support both Python 2.7 and 3. The future package is used to ensure the code runs on both platforms.
So I am using the Python interpreter PyPy as it makes my code run faster. However, everytime I try to run another code of mine, I get import error: No such module found. When I do a pip install pandas/numpy, it does not help as firstly the normal Python-2.7 folder already has it. And when I direct it to be installed directly to PyPy, the installation fails when it runs the setup.py file.
Could someone suggest another way in which I could get pandas and numpy to pypy? Thanks in advance!!
P.S. I have already tried: pypy setup.py install for pandas and numpy and it results in errors as well.
I'm not sure about the status of Pandas on Windows, but it looks like it doesn't work for shallow reasons and could be fixed. You should probably open an issue in PyPy's own tracker:
https://bitbucket.org/pypy/pypy/issues/
Be sure to mention it's on Windows, and include the complete copy of everything you typed and what is output.
So I am new in Python. I downloaded Anaconda (and Homebrew) and using Terminal on my Mac I confirmed that, say, Numpy is installed:
pip install numpy
to get as a result
Requirement already satisfied: numpy in ./anaconda/lib/python3.6/site-packages
Then opening Python within Terminal I can indeed import the package. The story is not the same once I open IDLE. So when I open it and try to import, say, Numpy I get the following message:
Traceback (most recent call last):
File "<pyshell#1>", line 1, in <module>
import numpy
ModuleNotFoundError: No module named 'numpy'
I guess there is something I do not know, I assume it is a common rookie problem. Can you help me with this?
Since your IDLE is using Python 3 you should use
pip3 install numpy
to get it installed for the correct Python. If you want to use your default installed Python (2.x) instead, IDLE is located at /usr/bin/. From your terminal you can open it with
/usr/bin/idle
this should have the numpy you installed with pip install numpy
See when you are working with Anaconda it creates its own virtual environment.
Now, If you are new in python on MAC then you might not familiar with Virtual Environment.
I suggest you to download python from the official website www.python.org
or Click here to directly download Python 3.6.2 on your MAC.
Then, Download Pycharm(The Best IDE for Python)
Download the community version for beginner and it is also free.
Pycharm Community Version -> Click Here
And do whatever you want and also must read about Virtualenv
According to me, Pycharm is better then Anaconda's Jupyter Notebook
Wish you good luck and show your creativity in python ! !
Erm... well it appears as though - since you have 2 versions on your computer - that it might be because it imported it into the other file path directory. Now, I've never worked with Mac, but I think if you just specify which pip you want to download from, it might work.
For example, on Windows:
C:\Python34\Scripts\pip.exe install numpy
or if you were doing it for 3.6, you would follow the path to the folder, find pip and install. So, I suggest to install the normal IDLE before any other platform built upon it just because it is easier to import modules and is not as bad to break like yours has.
There can be two issues -
You are using python 2 as a kernel for IDLE, since numpy is installed for python3.6. This will raise an error.
The issue is with anaconda's configuration with IDLE. Anaconda installs numpy in ./anaconda/lib/python3.6/site-packages. If IDLE uses systems default python instead of anaconda's. You will not be able to import numpy.
You can try running this snippet -
import sys
print('\n'.join(sys.path))
to track the location of python exactly.
One of the workaround that I can think of is -
create a virtual environment using anaconda. Something like
conda create -n py352 python=3.5.2 anaconda
and then fire IDLE from your terminal. Though I am not entirely sure, if this works for mac. If it doesn't, let me know the output of -
import sys
print('\n'.join(sys.path))