Related
Should I put the shebang in my Python scripts? In what form?
#!/usr/bin/env python
or
#!/usr/local/bin/python
Are these equally portable? Which form is used most?
Note: the tornado project uses the shebang. On the other hand the Django project doesn't.
The shebang line in any script determines the script's ability to be executed like a standalone executable without typing python beforehand in the terminal or when double clicking it in a file manager (when configured properly). It isn't necessary but generally put there so when someone sees the file opened in an editor, they immediately know what they're looking at. However, which shebang line you use is important.
Correct usage for (defaults to version 3.latest) Python 3 scripts is:
#!/usr/bin/env python3
Correct usage for (defaults to version 2.latest) Python 2 scripts is:
#!/usr/bin/env python2
The following should not be used (except for the rare case that you are writing code which is compatible with both Python 2.x and 3.x):
#!/usr/bin/env python
The reason for these recommendations, given in PEP 394, is that python can refer either to python2 or python3 on different systems.
Also, do not use:
#!/usr/local/bin/python
"python may be installed at /usr/bin/python or /bin/python in those
cases, the above #! will fail."
―"#!/usr/bin/env python" vs "#!/usr/local/bin/python"
It's really just a matter of taste. Adding the shebang means people can invoke the script directly if they want (assuming it's marked as executable); omitting it just means python has to be invoked manually.
The end result of running the program isn't affected either way; it's just options of the means.
Should I put the shebang in my Python scripts?
Put a shebang into a Python script to indicate:
this module can be run as a script
whether it can be run only on python2, python3 or is it Python 2/3 compatible
on POSIX, it is necessary if you want to run the script directly without invoking python executable explicitly
Are these equally portable? Which form is used most?
If you write a shebang manually then always use #!/usr/bin/env python unless you have a specific reason not to use it. This form is understood even on Windows (Python launcher).
Note: installed scripts should use a specific python executable e.g., /usr/bin/python or /home/me/.virtualenvs/project/bin/python. It is bad if some tool breaks if you activate a virtualenv in your shell. Luckily, the correct shebang is created automatically in most cases by setuptools or your distribution package tools (on Windows, setuptools can generate wrapper .exe scripts automatically).
In other words, if the script is in a source checkout then you will probably see #!/usr/bin/env python. If it is installed then the shebang is a path to a specific python executable such as #!/usr/local/bin/python (NOTE: you should not write the paths from the latter category manually).
To choose whether you should use python, python2, or python3 in the shebang, see PEP 394 - The "python" Command on Unix-Like Systems:
... python should be used in the shebang line only for scripts that are
source compatible with both Python 2 and 3.
in preparation for an eventual change in the default version of
Python, Python 2 only scripts should either be updated to be source
compatible with Python 3 or else to use python2 in the shebang line.
If you have more than one version of Python and the script needs to run under a specific version, the she-bang can ensure the right one is used when the script is executed directly, for example:
#!/usr/bin/python2.7
Note the script could still be run via a complete Python command line, or via import, in which case the she-bang is ignored. But for scripts run directly, this is a decent reason to use the she-bang.
#!/usr/bin/env python is generally the better approach, but this helps with special cases.
Usually it would be better to establish a Python virtual environment, in which case the generic #!/usr/bin/env python would identify the correct instance of Python for the virtualenv.
The purpose of shebang is for the script to recognize the interpreter type when you want to execute the script from the shell.
Mostly, and not always, you execute scripts by supplying the interpreter externally.
Example usage: python-x.x script.py
This will work even if you don't have a shebang declarator.
Why first one is more "portable" is because, /usr/bin/env contains your PATH declaration which accounts for all the destinations where your system executables reside.
NOTE: Tornado doesn't strictly use shebangs, and Django strictly doesn't. It varies with how you are executing your application's main function.
ALSO: It doesn't vary with Python.
You should add a shebang if the script is intended to be executable. You should also install the script with an installing software that modifies the shebang to something correct so it will work on the target platform. Examples of this is distutils and Distribute.
Sometimes, if the answer is not very clear (I mean you cannot decide if yes or no), then it does not matter too much, and you can ignore the problem until the answer is clear.
The #! only purpose is for launching the script. Django loads the sources on its own and uses them. It never needs to decide what interpreter should be used. This way, the #! actually makes no sense here.
Generally, if it is a module and cannot be used as a script, there is no need for using the #!. On the other hand, a module source often contains if __name__ == '__main__': ... with at least some trivial testing of the functionality. Then the #! makes sense again.
One good reason for using #! is when you use both Python 2 and Python 3 scripts -- they must be interpreted by different versions of Python. This way, you have to remember what python must be used when launching the script manually (without the #! inside). If you have a mixture of such scripts, it is a good idea to use the #! inside, make them executable, and launch them as executables (chmod ...).
When using MS-Windows, the #! had no sense -- until recently. Python 3.3 introduces a Windows Python Launcher (py.exe and pyw.exe) that reads the #! line, detects the installed versions of Python, and uses the correct or explicitly wanted version of Python. As the extension can be associated with a program, you can get similar behaviour in Windows as with execute flag in Unix-based systems.
When I installed Python 3.6.1 on Windows 7 recently, it also installed the Python Launcher for Windows, which is supposed to handle the shebang line. However, I found that the Python Launcher did not do this: the shebang line was ignored and Python 2.7.13 was always used (unless I executed the script using py -3).
To fix this, I had to edit the Windows registry key HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Python.File\shell\open\command. This still had the value
"C:\Python27\python.exe" "%1" %*
from my earlier Python 2.7 installation. I modified this registry key value to
"C:\Windows\py.exe" "%1" %*
and the Python Launcher shebang line processing worked as described above.
Answer: Only if you plan to make it a command-line executable script.
Here is the procedure:
Start off by verifying the proper shebang string to use:
which python
Take the output from that and add it (with the shebang #!) in the first line.
On my system it responds like so:
$which python
/usr/bin/python
So your shebang will look like:
#!/usr/bin/python
After saving, it will still run as before since python will see that first line as a comment.
python filename.py
To make it a command, copy it to drop the .py extension.
cp filename.py filename
Tell the file system that this will be executable:
chmod +x filename
To test it, use:
./filename
Best practice is to move it somewhere in your $PATH so all you need to type is the filename itself.
sudo cp filename /usr/sbin
That way it will work everywhere (without the ./ before the filename)
If you have different modules installed and need to use a specific
python install, then shebang appears to be limited at first. However,
you can do tricks like the below to allow the shebang to be invoked
first as a shell script and then choose python. This is very flexible
imo:
#!/bin/sh
#
# Choose the python we need. Explanation:
# a) '''\' translates to \ in shell, and starts a python multi-line string
# b) "" strings are treated as string concat by python, shell ignores them
# c) "true" command ignores its arguments
# c) exit before the ending ''' so the shell reads no further
# d) reset set docstrings to ignore the multiline comment code
#
"true" '''\'
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
echo Using preferred python $PREFERRED_PYTHON
exec $PREFERRED_PYTHON "$0" "$#"
elif [ -x $ALTERNATIVE_PYTHON ]; then
echo Using alternative python $ALTERNATIVE_PYTHON
exec $ALTERNATIVE_PYTHON "$0" "$#"
else
echo Using fallback python $FALLBACK_PYTHON
exec python3 "$0" "$#"
fi
exit 127
'''
__doc__ = """What this file does"""
print(__doc__)
import platform
print(platform.python_version())
Or better yet, perhaps, to facilitate code reuse across multiple python scripts:
#!/bin/bash
"true" '''\'; source $(cd $(dirname ${BASH_SOURCE[#]}) &>/dev/null && pwd)/select.sh; exec $CHOSEN_PYTHON "$0" "$#"; exit 127; '''
and then select.sh has:
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
CHOSEN_PYTHON=$PREFERRED_PYTHON
elif [ -x $ALTERNATIVE_PYTHON ]; then
CHOSEN_PYTHON=$ALTERNATIVE_PYTHON
else
CHOSEN_PYTHON=$FALLBACK_PYTHON
fi
This is really a question about whether the path to the Python interpreter should be absolute or logical (/usr/bin/env) with respect to portability.
My view after thoroughly testing the behavior is that the logical path in the she-bang is the better of the two options.
Being a Linux Engineer, my goal is always to provide the most suitable, optimized hosts for my developer clients, so the issue of Python environments is something I really need a solid answer to. Encountering other answers on this and other Stack Overflow sites which talked about the issue in a general way without supporting proofs, I've performed some really granular testing & analysis on this very question on Unix.SE.
For files that are intended to be executable from the command-line, I would recommend
#! /usr/bin/env python3
Otherwise you don't need the shebang (though of course it doesn't harm).
If you use virtual environments like with pyenv it is better to write #!/usr/bin/env python
The pyenv setting will control which version of python and from which file location is started to run your script.
If your code is known to be version specific, it will help others to find why your script does not behave in their environment if you specify the expected version in the shebang.
If you want to make your file executable you must add shebang line to your scripts.
#!/usr/bin/env python3
is better option in the sense that this will not be dependent on specific distro of linux but could be used on almost all linux distro since it hunts for the python3 path from environment variables, which is different for different distros of linux.
whereas
#!/usr/local/bin/python3
would be a distro specific path for python3 and would not work if python3 is not found on this path, and could result in confusion and ambiguity for developer when migrating from one distro to another of linux.
Use first
which python
This will give the output as the location where my python interpreter (binary) is present.
This output could be any such as
/usr/bin/python
or
/bin/python
Now appropriately select the shebang line and use it.
To generalize we can use:
#!/usr/bin/env
or
#!/bin/env
When you install Git on your computer, it can be run from the terminal with "git". Similarly, Python can be run with just "python" or "py".
If I make a CLI with argparse and Python, is there a way to have users simply install it and use it in the terminal just by typing
$ myCLI -option
Rather than
$ python path\to\myCLI.py -option
Like all the CLI's I use/interact with do?
Crude Solution
Your script just needs to be somewhere in the user's $PATH (and to have no extension if you don't want them to type myCLI.py). Additionally it needs to start with a magic comment #!/usr/bin/env python3 (If you are running Linux) and be executable (on linux chmod +x myCLI prior to distributing it). Alternatively you create a script in the native shell language of the desired OS (so sh for linux) which calls python3 /path/to/script or python -m module or the like.
If you you name your main script without a .py it prevents you importing it from anything else, so the usual approach is to have an 'entrypoint' script which consists of something like:
#!/usr/bin/env python3
from myApp import main
main()
(see the PyPa docs for a discussion)
Better solution
Of course, you need to deploy your entrypoint script somewhere in the end-user's $PATH. This can be more intersting, but luckily the whole thing is handled by setuptools, and you don't even need to write a script: you just need an entry point function:
Use console_script entry points to register your script interfaces. You can then let the toolchain handle the work of turning these interfaces into actual scripts
official docs
you just put in your setup.py:
setup(
entry_points = {
'console_scripts': [
'PKG_NAME = package.module:func',
],
}
)
and anyone who types PKG_NAME will effectively run package.module:func() (so func is your entrypoint main() function above).
See this question for a discussion of the merits of this approach over the old approach of writing separate scripts for each platform.
Note that if you're not building your app as a python package, but are using some other packaging standard (archlinux PKGBUILD or .deb or whatever) you can still take the same approach---just write the entry point script as above and have the package place it somewhere in the user's $PATH.
Should I put the shebang in my Python scripts? In what form?
#!/usr/bin/env python
or
#!/usr/local/bin/python
Are these equally portable? Which form is used most?
Note: the tornado project uses the shebang. On the other hand the Django project doesn't.
The shebang line in any script determines the script's ability to be executed like a standalone executable without typing python beforehand in the terminal or when double clicking it in a file manager (when configured properly). It isn't necessary but generally put there so when someone sees the file opened in an editor, they immediately know what they're looking at. However, which shebang line you use is important.
Correct usage for (defaults to version 3.latest) Python 3 scripts is:
#!/usr/bin/env python3
Correct usage for (defaults to version 2.latest) Python 2 scripts is:
#!/usr/bin/env python2
The following should not be used (except for the rare case that you are writing code which is compatible with both Python 2.x and 3.x):
#!/usr/bin/env python
The reason for these recommendations, given in PEP 394, is that python can refer either to python2 or python3 on different systems.
Also, do not use:
#!/usr/local/bin/python
"python may be installed at /usr/bin/python or /bin/python in those
cases, the above #! will fail."
―"#!/usr/bin/env python" vs "#!/usr/local/bin/python"
It's really just a matter of taste. Adding the shebang means people can invoke the script directly if they want (assuming it's marked as executable); omitting it just means python has to be invoked manually.
The end result of running the program isn't affected either way; it's just options of the means.
Should I put the shebang in my Python scripts?
Put a shebang into a Python script to indicate:
this module can be run as a script
whether it can be run only on python2, python3 or is it Python 2/3 compatible
on POSIX, it is necessary if you want to run the script directly without invoking python executable explicitly
Are these equally portable? Which form is used most?
If you write a shebang manually then always use #!/usr/bin/env python unless you have a specific reason not to use it. This form is understood even on Windows (Python launcher).
Note: installed scripts should use a specific python executable e.g., /usr/bin/python or /home/me/.virtualenvs/project/bin/python. It is bad if some tool breaks if you activate a virtualenv in your shell. Luckily, the correct shebang is created automatically in most cases by setuptools or your distribution package tools (on Windows, setuptools can generate wrapper .exe scripts automatically).
In other words, if the script is in a source checkout then you will probably see #!/usr/bin/env python. If it is installed then the shebang is a path to a specific python executable such as #!/usr/local/bin/python (NOTE: you should not write the paths from the latter category manually).
To choose whether you should use python, python2, or python3 in the shebang, see PEP 394 - The "python" Command on Unix-Like Systems:
... python should be used in the shebang line only for scripts that are
source compatible with both Python 2 and 3.
in preparation for an eventual change in the default version of
Python, Python 2 only scripts should either be updated to be source
compatible with Python 3 or else to use python2 in the shebang line.
If you have more than one version of Python and the script needs to run under a specific version, the she-bang can ensure the right one is used when the script is executed directly, for example:
#!/usr/bin/python2.7
Note the script could still be run via a complete Python command line, or via import, in which case the she-bang is ignored. But for scripts run directly, this is a decent reason to use the she-bang.
#!/usr/bin/env python is generally the better approach, but this helps with special cases.
Usually it would be better to establish a Python virtual environment, in which case the generic #!/usr/bin/env python would identify the correct instance of Python for the virtualenv.
The purpose of shebang is for the script to recognize the interpreter type when you want to execute the script from the shell.
Mostly, and not always, you execute scripts by supplying the interpreter externally.
Example usage: python-x.x script.py
This will work even if you don't have a shebang declarator.
Why first one is more "portable" is because, /usr/bin/env contains your PATH declaration which accounts for all the destinations where your system executables reside.
NOTE: Tornado doesn't strictly use shebangs, and Django strictly doesn't. It varies with how you are executing your application's main function.
ALSO: It doesn't vary with Python.
You should add a shebang if the script is intended to be executable. You should also install the script with an installing software that modifies the shebang to something correct so it will work on the target platform. Examples of this is distutils and Distribute.
Sometimes, if the answer is not very clear (I mean you cannot decide if yes or no), then it does not matter too much, and you can ignore the problem until the answer is clear.
The #! only purpose is for launching the script. Django loads the sources on its own and uses them. It never needs to decide what interpreter should be used. This way, the #! actually makes no sense here.
Generally, if it is a module and cannot be used as a script, there is no need for using the #!. On the other hand, a module source often contains if __name__ == '__main__': ... with at least some trivial testing of the functionality. Then the #! makes sense again.
One good reason for using #! is when you use both Python 2 and Python 3 scripts -- they must be interpreted by different versions of Python. This way, you have to remember what python must be used when launching the script manually (without the #! inside). If you have a mixture of such scripts, it is a good idea to use the #! inside, make them executable, and launch them as executables (chmod ...).
When using MS-Windows, the #! had no sense -- until recently. Python 3.3 introduces a Windows Python Launcher (py.exe and pyw.exe) that reads the #! line, detects the installed versions of Python, and uses the correct or explicitly wanted version of Python. As the extension can be associated with a program, you can get similar behaviour in Windows as with execute flag in Unix-based systems.
When I installed Python 3.6.1 on Windows 7 recently, it also installed the Python Launcher for Windows, which is supposed to handle the shebang line. However, I found that the Python Launcher did not do this: the shebang line was ignored and Python 2.7.13 was always used (unless I executed the script using py -3).
To fix this, I had to edit the Windows registry key HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Python.File\shell\open\command. This still had the value
"C:\Python27\python.exe" "%1" %*
from my earlier Python 2.7 installation. I modified this registry key value to
"C:\Windows\py.exe" "%1" %*
and the Python Launcher shebang line processing worked as described above.
Answer: Only if you plan to make it a command-line executable script.
Here is the procedure:
Start off by verifying the proper shebang string to use:
which python
Take the output from that and add it (with the shebang #!) in the first line.
On my system it responds like so:
$which python
/usr/bin/python
So your shebang will look like:
#!/usr/bin/python
After saving, it will still run as before since python will see that first line as a comment.
python filename.py
To make it a command, copy it to drop the .py extension.
cp filename.py filename
Tell the file system that this will be executable:
chmod +x filename
To test it, use:
./filename
Best practice is to move it somewhere in your $PATH so all you need to type is the filename itself.
sudo cp filename /usr/sbin
That way it will work everywhere (without the ./ before the filename)
If you have different modules installed and need to use a specific
python install, then shebang appears to be limited at first. However,
you can do tricks like the below to allow the shebang to be invoked
first as a shell script and then choose python. This is very flexible
imo:
#!/bin/sh
#
# Choose the python we need. Explanation:
# a) '''\' translates to \ in shell, and starts a python multi-line string
# b) "" strings are treated as string concat by python, shell ignores them
# c) "true" command ignores its arguments
# c) exit before the ending ''' so the shell reads no further
# d) reset set docstrings to ignore the multiline comment code
#
"true" '''\'
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
echo Using preferred python $PREFERRED_PYTHON
exec $PREFERRED_PYTHON "$0" "$#"
elif [ -x $ALTERNATIVE_PYTHON ]; then
echo Using alternative python $ALTERNATIVE_PYTHON
exec $ALTERNATIVE_PYTHON "$0" "$#"
else
echo Using fallback python $FALLBACK_PYTHON
exec python3 "$0" "$#"
fi
exit 127
'''
__doc__ = """What this file does"""
print(__doc__)
import platform
print(platform.python_version())
Or better yet, perhaps, to facilitate code reuse across multiple python scripts:
#!/bin/bash
"true" '''\'; source $(cd $(dirname ${BASH_SOURCE[#]}) &>/dev/null && pwd)/select.sh; exec $CHOSEN_PYTHON "$0" "$#"; exit 127; '''
and then select.sh has:
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
CHOSEN_PYTHON=$PREFERRED_PYTHON
elif [ -x $ALTERNATIVE_PYTHON ]; then
CHOSEN_PYTHON=$ALTERNATIVE_PYTHON
else
CHOSEN_PYTHON=$FALLBACK_PYTHON
fi
This is really a question about whether the path to the Python interpreter should be absolute or logical (/usr/bin/env) with respect to portability.
My view after thoroughly testing the behavior is that the logical path in the she-bang is the better of the two options.
Being a Linux Engineer, my goal is always to provide the most suitable, optimized hosts for my developer clients, so the issue of Python environments is something I really need a solid answer to. Encountering other answers on this and other Stack Overflow sites which talked about the issue in a general way without supporting proofs, I've performed some really granular testing & analysis on this very question on Unix.SE.
For files that are intended to be executable from the command-line, I would recommend
#! /usr/bin/env python3
Otherwise you don't need the shebang (though of course it doesn't harm).
If you use virtual environments like with pyenv it is better to write #!/usr/bin/env python
The pyenv setting will control which version of python and from which file location is started to run your script.
If your code is known to be version specific, it will help others to find why your script does not behave in their environment if you specify the expected version in the shebang.
If you want to make your file executable you must add shebang line to your scripts.
#!/usr/bin/env python3
is better option in the sense that this will not be dependent on specific distro of linux but could be used on almost all linux distro since it hunts for the python3 path from environment variables, which is different for different distros of linux.
whereas
#!/usr/local/bin/python3
would be a distro specific path for python3 and would not work if python3 is not found on this path, and could result in confusion and ambiguity for developer when migrating from one distro to another of linux.
Use first
which python
This will give the output as the location where my python interpreter (binary) is present.
This output could be any such as
/usr/bin/python
or
/bin/python
Now appropriately select the shebang line and use it.
To generalize we can use:
#!/usr/bin/env
or
#!/bin/env
This is a follow up question as I'm trying to move forward with Zelle's Python:Programming.
It appears that IDLE 2.7.2 has hang issues when opening graphics windows in interactive mode. But, I can simply run Python interactively in Terminal and don't have any of those issues. So that's a big help. Zelle provides a simplified graphics file called graphics.py, to get up to speed with objects and graphics, before dealing directly with Tkinter.
My question is this. Where should I put graphics.py, so Terminal will see it (when it's called), without including the full path every time? Thanks,
Henry
According to PEP 0370, a good place to put your user packages is in ~/.local/lib/python2.7/site-packages.
Modules in here should be importable.
You can modify your ~/.bashrc to include a PYTHONPATH definition that includes the location of the file.
export PYTHONPATH="/path/to/directory_containing_graphics.py"
Just be careful if it's in your home director to use /Users/[username]/etc/directory_containing_graphics.py, I vaguely recall being bitten by ~ not expanding like I expected one time on OS X.
I went deep down the rabbit hole to get to bottom of this issue. It turns out that bash on OSX has a few quirks, not unexpected with the various flavors of UNIX around. It turns out that when firing up a bash shell, bash looks in .bash_profile for config statements. If you enter bash into bash, you fire up a sub shell, and that's when and only when .bashrc is executed.
To make sure you only have to manage one config file, put:
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
in your .bash_profile. This just tells bash to look into the .bashrc file if it exists. You can then leave that file alone and only modify your .bashrc file and all instances of bash will be modified the same. Once I figured this out, I still had to solve my problem. Here's the best I could do. When Python installed it installed this into my .bash_profile:
PATH="/Library/Frameworks/Python.framework/Versions/2.7/bin:${PATH}"
export PATH
This tells bash where to look for the libraries needed to run Python. So I moved this statement to my .bashrc file after putting the "if" statement into my .bash_profile. I then tried adding a : to the PATH statement with the path to my Python modules, but that didn't work. So, I have settled for a statement like this in .bashrc:
PYTHONPATH=$PYTHONPATH:/Users/ftpbub/Documents/workspace/Python\ Programming\ Modules/src/
export PYTHONPATH
Now I enter python at the command prompt, and when I get to python, I can enter import modulename without the path and it works. If I start a new project in a new directory, I should be able to add it to my PYTHONPATH and be good. I would have liked to be able to enter python modulename right into bash and have the module execute, but I haven't figured out how to do that. Other than that, I think this the best I can do. Ideas for how to go straight to the module from the bash prompt, without entering the path?
Should I put the shebang in my Python scripts? In what form?
#!/usr/bin/env python
or
#!/usr/local/bin/python
Are these equally portable? Which form is used most?
Note: the tornado project uses the shebang. On the other hand the Django project doesn't.
The shebang line in any script determines the script's ability to be executed like a standalone executable without typing python beforehand in the terminal or when double clicking it in a file manager (when configured properly). It isn't necessary but generally put there so when someone sees the file opened in an editor, they immediately know what they're looking at. However, which shebang line you use is important.
Correct usage for (defaults to version 3.latest) Python 3 scripts is:
#!/usr/bin/env python3
Correct usage for (defaults to version 2.latest) Python 2 scripts is:
#!/usr/bin/env python2
The following should not be used (except for the rare case that you are writing code which is compatible with both Python 2.x and 3.x):
#!/usr/bin/env python
The reason for these recommendations, given in PEP 394, is that python can refer either to python2 or python3 on different systems.
Also, do not use:
#!/usr/local/bin/python
"python may be installed at /usr/bin/python or /bin/python in those
cases, the above #! will fail."
―"#!/usr/bin/env python" vs "#!/usr/local/bin/python"
It's really just a matter of taste. Adding the shebang means people can invoke the script directly if they want (assuming it's marked as executable); omitting it just means python has to be invoked manually.
The end result of running the program isn't affected either way; it's just options of the means.
Should I put the shebang in my Python scripts?
Put a shebang into a Python script to indicate:
this module can be run as a script
whether it can be run only on python2, python3 or is it Python 2/3 compatible
on POSIX, it is necessary if you want to run the script directly without invoking python executable explicitly
Are these equally portable? Which form is used most?
If you write a shebang manually then always use #!/usr/bin/env python unless you have a specific reason not to use it. This form is understood even on Windows (Python launcher).
Note: installed scripts should use a specific python executable e.g., /usr/bin/python or /home/me/.virtualenvs/project/bin/python. It is bad if some tool breaks if you activate a virtualenv in your shell. Luckily, the correct shebang is created automatically in most cases by setuptools or your distribution package tools (on Windows, setuptools can generate wrapper .exe scripts automatically).
In other words, if the script is in a source checkout then you will probably see #!/usr/bin/env python. If it is installed then the shebang is a path to a specific python executable such as #!/usr/local/bin/python (NOTE: you should not write the paths from the latter category manually).
To choose whether you should use python, python2, or python3 in the shebang, see PEP 394 - The "python" Command on Unix-Like Systems:
... python should be used in the shebang line only for scripts that are
source compatible with both Python 2 and 3.
in preparation for an eventual change in the default version of
Python, Python 2 only scripts should either be updated to be source
compatible with Python 3 or else to use python2 in the shebang line.
If you have more than one version of Python and the script needs to run under a specific version, the she-bang can ensure the right one is used when the script is executed directly, for example:
#!/usr/bin/python2.7
Note the script could still be run via a complete Python command line, or via import, in which case the she-bang is ignored. But for scripts run directly, this is a decent reason to use the she-bang.
#!/usr/bin/env python is generally the better approach, but this helps with special cases.
Usually it would be better to establish a Python virtual environment, in which case the generic #!/usr/bin/env python would identify the correct instance of Python for the virtualenv.
The purpose of shebang is for the script to recognize the interpreter type when you want to execute the script from the shell.
Mostly, and not always, you execute scripts by supplying the interpreter externally.
Example usage: python-x.x script.py
This will work even if you don't have a shebang declarator.
Why first one is more "portable" is because, /usr/bin/env contains your PATH declaration which accounts for all the destinations where your system executables reside.
NOTE: Tornado doesn't strictly use shebangs, and Django strictly doesn't. It varies with how you are executing your application's main function.
ALSO: It doesn't vary with Python.
You should add a shebang if the script is intended to be executable. You should also install the script with an installing software that modifies the shebang to something correct so it will work on the target platform. Examples of this is distutils and Distribute.
Sometimes, if the answer is not very clear (I mean you cannot decide if yes or no), then it does not matter too much, and you can ignore the problem until the answer is clear.
The #! only purpose is for launching the script. Django loads the sources on its own and uses them. It never needs to decide what interpreter should be used. This way, the #! actually makes no sense here.
Generally, if it is a module and cannot be used as a script, there is no need for using the #!. On the other hand, a module source often contains if __name__ == '__main__': ... with at least some trivial testing of the functionality. Then the #! makes sense again.
One good reason for using #! is when you use both Python 2 and Python 3 scripts -- they must be interpreted by different versions of Python. This way, you have to remember what python must be used when launching the script manually (without the #! inside). If you have a mixture of such scripts, it is a good idea to use the #! inside, make them executable, and launch them as executables (chmod ...).
When using MS-Windows, the #! had no sense -- until recently. Python 3.3 introduces a Windows Python Launcher (py.exe and pyw.exe) that reads the #! line, detects the installed versions of Python, and uses the correct or explicitly wanted version of Python. As the extension can be associated with a program, you can get similar behaviour in Windows as with execute flag in Unix-based systems.
When I installed Python 3.6.1 on Windows 7 recently, it also installed the Python Launcher for Windows, which is supposed to handle the shebang line. However, I found that the Python Launcher did not do this: the shebang line was ignored and Python 2.7.13 was always used (unless I executed the script using py -3).
To fix this, I had to edit the Windows registry key HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Python.File\shell\open\command. This still had the value
"C:\Python27\python.exe" "%1" %*
from my earlier Python 2.7 installation. I modified this registry key value to
"C:\Windows\py.exe" "%1" %*
and the Python Launcher shebang line processing worked as described above.
Answer: Only if you plan to make it a command-line executable script.
Here is the procedure:
Start off by verifying the proper shebang string to use:
which python
Take the output from that and add it (with the shebang #!) in the first line.
On my system it responds like so:
$which python
/usr/bin/python
So your shebang will look like:
#!/usr/bin/python
After saving, it will still run as before since python will see that first line as a comment.
python filename.py
To make it a command, copy it to drop the .py extension.
cp filename.py filename
Tell the file system that this will be executable:
chmod +x filename
To test it, use:
./filename
Best practice is to move it somewhere in your $PATH so all you need to type is the filename itself.
sudo cp filename /usr/sbin
That way it will work everywhere (without the ./ before the filename)
If you have different modules installed and need to use a specific
python install, then shebang appears to be limited at first. However,
you can do tricks like the below to allow the shebang to be invoked
first as a shell script and then choose python. This is very flexible
imo:
#!/bin/sh
#
# Choose the python we need. Explanation:
# a) '''\' translates to \ in shell, and starts a python multi-line string
# b) "" strings are treated as string concat by python, shell ignores them
# c) "true" command ignores its arguments
# c) exit before the ending ''' so the shell reads no further
# d) reset set docstrings to ignore the multiline comment code
#
"true" '''\'
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
echo Using preferred python $PREFERRED_PYTHON
exec $PREFERRED_PYTHON "$0" "$#"
elif [ -x $ALTERNATIVE_PYTHON ]; then
echo Using alternative python $ALTERNATIVE_PYTHON
exec $ALTERNATIVE_PYTHON "$0" "$#"
else
echo Using fallback python $FALLBACK_PYTHON
exec python3 "$0" "$#"
fi
exit 127
'''
__doc__ = """What this file does"""
print(__doc__)
import platform
print(platform.python_version())
Or better yet, perhaps, to facilitate code reuse across multiple python scripts:
#!/bin/bash
"true" '''\'; source $(cd $(dirname ${BASH_SOURCE[#]}) &>/dev/null && pwd)/select.sh; exec $CHOSEN_PYTHON "$0" "$#"; exit 127; '''
and then select.sh has:
PREFERRED_PYTHON=/Library/Frameworks/Python.framework/Versions/2.7/bin/python
ALTERNATIVE_PYTHON=/Library/Frameworks/Python.framework/Versions/3.6/bin/python3
FALLBACK_PYTHON=python3
if [ -x $PREFERRED_PYTHON ]; then
CHOSEN_PYTHON=$PREFERRED_PYTHON
elif [ -x $ALTERNATIVE_PYTHON ]; then
CHOSEN_PYTHON=$ALTERNATIVE_PYTHON
else
CHOSEN_PYTHON=$FALLBACK_PYTHON
fi
This is really a question about whether the path to the Python interpreter should be absolute or logical (/usr/bin/env) with respect to portability.
My view after thoroughly testing the behavior is that the logical path in the she-bang is the better of the two options.
Being a Linux Engineer, my goal is always to provide the most suitable, optimized hosts for my developer clients, so the issue of Python environments is something I really need a solid answer to. Encountering other answers on this and other Stack Overflow sites which talked about the issue in a general way without supporting proofs, I've performed some really granular testing & analysis on this very question on Unix.SE.
For files that are intended to be executable from the command-line, I would recommend
#! /usr/bin/env python3
Otherwise you don't need the shebang (though of course it doesn't harm).
If you use virtual environments like with pyenv it is better to write #!/usr/bin/env python
The pyenv setting will control which version of python and from which file location is started to run your script.
If your code is known to be version specific, it will help others to find why your script does not behave in their environment if you specify the expected version in the shebang.
If you want to make your file executable you must add shebang line to your scripts.
#!/usr/bin/env python3
is better option in the sense that this will not be dependent on specific distro of linux but could be used on almost all linux distro since it hunts for the python3 path from environment variables, which is different for different distros of linux.
whereas
#!/usr/local/bin/python3
would be a distro specific path for python3 and would not work if python3 is not found on this path, and could result in confusion and ambiguity for developer when migrating from one distro to another of linux.
Use first
which python
This will give the output as the location where my python interpreter (binary) is present.
This output could be any such as
/usr/bin/python
or
/bin/python
Now appropriately select the shebang line and use it.
To generalize we can use:
#!/usr/bin/env
or
#!/bin/env