We Keep Coding

How to fix errors occurring on installation of Jupyter Notebook

I am new to Python and try to install Jupyter Notebook from within a Windows command prompt window using:
pip install jupyter
But after a couple of minutes of downloading, an error message is displayed as shown below:
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing wheel metadata ... error
ERROR: Command errored out with exit status 1:
command: 'c:\users\asd\appdata\local\programs\python\python38-32\python.exe
' 'c:\users\asd\appdata\local\programs\python\python38-32\lib\site-packages\pip\
_vendor\pep517\_in_process.py' prepare_metadata_for_build_wheel 'C:\Users\asd\Ap
pData\Local\Temp\tmpnj_hhq6y'
cwd: C:\Users\asd\AppData\Local\Temp\pip-install-_pnki5r8\pywinpty
Complete output (6 lines):
Cargo, the Rust package manager, is not installed or is not on PATH.
This package requires Rust and Cargo to compile extensions. Install it through
the system's package manager or via https://rustup.rs/
Checking for Rust toolchain....
----------------------------------------
ERROR: Command errored out with exit status 1: 'c:\users\asd\appdata\local\progr
ams\python\python38-32\python.exe' 'c:\users\asd\appdata\local\programs\python\p
ython38-32\lib\site-packages\pip\_vendor\pep517\_in_process.py' prepare_metadata
_for_build_wheel 'C:\Users\asd\AppData\Local\Temp\tmpnj_hhq6y' Check the logs for
full command output.
WARNING: You are using pip version 20.2.1; however, version 21.1 is available.
You should consider upgrading via the 'c:\users\asd\appdata\local\programs\pytho
n\python38-32\python.exe -m pip install --upgrade pip' command.
I have attached here just the last part of the error output.
How to fix this error for a successful installation of Jupyter Notebook?
EDIT1: I installed the Rust package from the link in the error message. After that I tried installing Jupyter Notebook once again, and this time after proceeding a few steps further than before, it output another error:
Building wheels for collected packages: pywinpty
Building wheel for pywinpty (PEP 517) ... - WARNING: Subprocess output does
not appear to be encoded as cp1252
WARNING: Subprocess output does not appear to be encoded as cp1252
error
ERROR: Command errored out with exit status 1:
command: 'c:\users\asd\appdata\local\programs\python\python38-32\python.exe'
'c:\users\asd\appdata\local\programs\python\python38-32\lib\site-packages\pip\_v
endor\pep517\_in_process.py' build_wheel 'C:\Users\asd\AppData\Local\Temp\tmpaj5
u66_y'
cwd: C:\Users\asd\AppData\Local\Temp\pip-install-mep4ye8d\pywinpty
Complete output (60 lines):
Running `maturin pep517 build-wheel -i c:\users\asd\appdata\local\programs\pyt
hon\python38-32\python.exe`
Compiling proc-macro2 v1.0.26
Compiling unicode-xid v0.2.2
Compiling syn v1.0.71
Compiling winapi v0.3.9
Compiling jobserver v0.1.22
error: could not compile `proc-macro2`
To learn more, run the command again with --verbose.
warning: build failed, waiting for other jobs to finish...
error: build failed
dY'¥ maturin failed
Caused by: Failed to build a native library through cargo
Caused by: Cargo build finished with "exit code: 101": `cargo rustc --messag
e-format json --manifest-path Cargo.toml --release --lib --`
dY\x8d1 Building a mixed python/rust project
dY"- Found pyo3 bindings
dY\x90\x8d Found CPython 3.8 at c:\users\asd\appdata\local\programs\python\pyt
hon38-32\python.exe
error: linker `link.exe` not found
|
= note: The system cannot find the file specified. (os error 2)
note: the msvc targets depend on the msvc linker but `link.exe` was not found
note: please ensure that VS 2013, VS 2015, VS 2017 or VS 2019 was installed wi
th the Visual C++ option
error: aborting due to previous error
error: linker `link.exe` not found
|
= note: The system cannot find the file specified. (os error 2)
note: the msvc targets depend on the msvc linker but `link.exe` was not found
note: please ensure that VS 2013, VS 2015, VS 2017 or VS 2019 was installed wi
th the Visual C++ option
error: aborting due to previous error
error: linker `link.exe` not found
|
= note: The system cannot find the file specified. (os error 2)
note: the msvc targets depend on the msvc linker but `link.exe` was not found
note: please ensure that VS 2013, VS 2015, VS 2017 or VS 2019 was installed wi
th the Visual C++ option
error: aborting due to previous error
Error: command ['maturin', 'pep517', 'build-wheel', '-i', 'c:\\users\\asd\\app
data\\local\\programs\\python\\python38-32\\python.exe'] returned non-zero exit
status 1
----------------------------------------
ERROR: Failed building wheel for pywinpty
Failed to build pywinpty
ERROR: Could not build wheels for pywinpty which use PEP 517 and cannot be insta
lled directly
WARNING: You are using pip version 20.2.1; however, version 21.1 is available.
You should consider upgrading via the 'c:\users\asd\appdata\local\programs\pytho
n\python38-32\python.exe -m pip install --upgrade pip' command.

Upgrade your pip first:
pip install --upgrade pip
Then:
pip install jupyter

I'reached this post after failing to install notebook on a 32-bit python 3.8.3 execution. And as far as I found, pywinpty, which is a dependence, does not support 32-bit executions (see sources below).
I solved the problem by installing python on its 64-bit version.
Sources:
How do I determine if my python shell is executing in 32bit or 64bit?
pip install fails on Python 3.8 32-bit, prevents Jupyter install #129 which simply says that wheels cannot be installed with 32 bit Python and that you should use 64 bit Python instead.
We can't generate 32 bit wheels, sorry. Please use a 64bit build of Python.. Was not my case but might be useful this similar issue when using python 3.8 64-bit
Error installing Jupyter & pywinpty (Python)
https://github.com/spyder-ide/pywinpty/issues/123

Do
pip install wheel
and try again. It worked for me.

What to do:
Check if your python is 64-bit version. If no, go to python site (for example, here is the link to download 3.7.9. Just click at the version that has label "for AMD64/EM64T/x64", do it with any version you wish, just I don't like to use the newest version). Remove yours (with the uninstall file) and download this. Don't forget to put the checkmark near "Add PATH" below;
Download Rust (the description is inside) - you need some files. Check the PATHs - if you want to change them, do it (the names of the variables and where they are - both are written, you can search in the Internet how to change PATH var's (for example));
Go to Windows Shell with admin mode (Win+X and you get the field) - here is the most comfortable place to work;
Go to your python.exe (for example, my way is C:\Users\user\AppData\Local\Programs\Python\Python37) - just for sure;
python.exe python -m pip install --upgrade pip;
python.exe pip install jupyter;
If an error was returned that contains the missing of wheel, try to download it: python.exe pip install wheel.
Donwload any library you miss during installation and continue since the step you stopped at.

Try using Anaconda. link to install conda https://www.anaconda.com/products/individual
then cmd : conda install numpy
cmd: conda install jupyter
cmd : jupyter notebook

The error message looks quite clear, you needs to install Cargo via https://rustup.rs/

I have faced the same issue when I'm using vscode. The simplest solution is to use conda instead of pip
conda install jupyterlab

Cannot install python package due to cmake error

I am trying to install the disptools package by doing pip install disptools in my terminal.
The disptools package is linked here https://github.com/m-pilia/disptools.
It gives me a long error message during the installation with the main error displayed below.
Building wheel for disptools (setup.py) ... error
ERROR: Command errored out with exit status 1:
...
CMake Error:
Could NOT find OpenMP_C (missing: OpenMP_C_FLAGS OpenMP_C_LIB_NAMES)`
It also includes this in the error:
File "/Users/name/anaconda3/lib/python3.6/subprocess.py", line 311, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/private/var/folders/6p/16591qb93vs76dysmldcz8140000gn/T/pip-install-vn5twf6v/disptools', '-DDISPTOOLS_DEBUG=OFF', '-DDISPTOOLS_OPT=OFF', '-DDISPTOOLS_VERBOSE=ON', '-DDISPTOOLS_LOW_ORDER_PD=OFF', '-DDISPTOOLS_DOUBLE=OFF', '-DDISPTOOLS_CUDA_SUPPORT=OFF', '-DDISPTOOLS_CUDA_ERROR_CHECK=ON', '-DDISPTOOLS_CUDA_ERROR_CHECK_SYNC=ON', '-DDISPTOOLS_PYTHON_SUPPORT=ON', '-DDISPTOOLS_PYTHON_C_MODULE_NAME=_disptools', '-DCMAKE_BUILD_TYPE=Release', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=/private/var/folders/6p/16591qb93vs76dysmldcz8140000gn/T/pip-install-vn5twf6v/disptools/build/lib.macosx-10.9-x86_64-3.6', '-DCMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELEASE=build/temp.macosx-10.9-x86_64-3.6', '-DPYTHON_EXECUTABLE=/Users/name/anaconda3/bin/python3']'
returned non-zero exit status 1.
I have looked everywhere online but I couldn't really find any helpful resources for solving this problem.
Would really appreciate it if someone can help.

With commands, python -m pip install disptools you try to download, compile and install the disptools.
Compilation step fails with a CMake error that tell that it failed to find library OpenMP. You can install it on a Ubuntu/Debian distribution with
sudo apt install libomp-dev
After this, you can launch again the pip command.
I hope you will meet all compilation requirements.

If you are using Anaconda Prompt (recommended),
conda install -c conda-forge dlib

PyCharm Jupyter notebook No module named 'toolbox'

I am trying to install toolbox and it shows the below error. I already updated the setup-toolbox but I still get this error. Any help will be highly appreciated.
While installing toolbox from pycharm it shows this error:
FileNotFoundError:No such file or directory: 'C:\\Users\\abc\\AppData\\Local\\Temp\\pycharm-packaging\\toolbox\\setup.py'
Installing via command line it show:
Command "python setup.py egg_info" failed with error code 1 in C:\Users\abc\AppData\Local\Temp\pip-install-j5ja0k9r\toolbox\.

Try upgrading the console:
pip install -U jupyter_console
You can also download manually from here

Error while trying to build a .whl file using python setup.py install --static-link with cygwin

I was trying to build a .whl file using python setup.py install --static-link using cygwin but this error appears: error: command 'C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Tools\MSVC\14.24.28314\bin\HostX86\x64\link.exe' failed with exit status 1120
The files i was trying to build were from here : https://github.com/intxcc/pyaudio_portaudio
I followed the same exact commands using cygwin but i wasn't able to do python setup.py install --static-link.Also the same thing occured weirdly enough when i tried to pip install pyaudio.So i did pipwin install pyaudio and it solved my problems in that moment.But now the error remains with a different command.
Anyone know what could be the issue?Thanks

"error: command 'cl.exe' failed: No such file or directory" - Python Dedupe Installtion

I am trying to install dedupe module and I am getting an error below,
error: command 'cl.exe' failed: No such file or directory
Failed building wheel for dedupe
Failed building wheel for dedupe-hcluster
Failed building wheel for affinegap
Failed building wheel for pylbfgs
Failed building wheel for pyhacrf-datamade
I found this link, that did not help me to resolve.
I am using Windows 10 , 64-bit, Python 3.5.4 :: Anaconda custom (64-bit).
I found the .whl file here, (dedupe-1.9.2-cp35-cp35m-manylinux1_x86_64.whl) downloaded it and tried to use pip install <>.whl and I got an error,
dedupe-1.9.2-cp35-cp35m-manylinux1_x86_64.whl is not a supported wheel
on this platform.
Any ideas on how to resolve this issue?

So, finally, after more research I successfully installed dedupe library. Just thought of posting my own answer if anyone might come across this issue.
In the beginning I only had Visual Studio Build Tools 2017 installed with Visual Studio 2015.
After posting the question I installed Visual Studio Community 2017 (2). And then tried use pip install dedupe still gave me errors like in this post.
Then according to the post, I upgraded the numpy =1.14 and tried pip install dedupe, it worked.
(I am not an expert python setup person, not sure how to explain other than this plain explanation)

I downgraded my python version and it worked first try