Related
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I've been trying to find a solution to this problem for a while now: I'm trying to display an image using the Pygame module in python but I always get this error:
File "C:/Users/Brandon/PycharmProjects/UnstableUnicorns/UnstableUnicorns Test.py", line 13, in <module>
Baby_Narwhal = pygame.image.load(r"Baby Narwhal.png").convert()
pygame.error: Couldn't open Baby Narwhal.png
(Yes I know there are spaces but there are a lot of images that I want to display and they all have spaces in their names)
I've tried putting the whole path file, using .convert(), using backslashes (and removing the spaces didn't work either) and adding interpreter paths. I've asked this question multiple times on this site and I haven't gotten a working answer. Help.
import pygame
import os
import sys
from time import sleep
print(os.getcwd())
# get the directory of this file
sourceFileDir = os.path.dirname(os.path.abspath(__file__))
# [...]
Baby_Narwhal = pygame.image.load(r"Baby Narwhal.png").convert()
pygame.init()
xDisplay = 1000
yDisplay = 500
white = (255, 255, 255)
def main():
display = pygame.display.set_mode((xDisplay, yDisplay))
while True:
display.fill(white)
display.blit(Baby_Narwhal, (0, 0))
for event in pygame.event.get():
if event.type == pygame.QUIT:
pygame.quit()
quit()
pygame.display.update()
main()
I think your solution would to get the path of the image or whatever you need. I had this problem about a month ago, and getting the exact path fixed it for me. You should also verify that you have the correct name of the file in your code. Hope this helps.. Good luck! :)
Example: C:/User/Desktop...
(im a linux guy) I don't usually use Windows so I don't know paths off the top of my head. Additionally, you could try and put your pygame file and image into your same folder and just get the name of your image/file.
This question already has answers here:
How can I convert pygame to exe?
(6 answers)
Pygame2Exe Errors that I can't fix
(3 answers)
Closed 1 year ago.
I want to be able to convert .py to .exe for python 3 pygame 1.9.4 projects (on my Windows 10 computer), and I have successfully converted some files by using auto py to exe (one file, console based):
https://nitratine.net/blog/post/auto-py-to-exe/.
For example, I tried to convert the code that is quite far up on this site:
http://openbookproject.net/thinkcs/python/english3e/pygame.html. That is:
import pygame
def main():
""" Set up the game and run the main game loop """
pygame.init() # Prepare the pygame module for use
surface_sz = 480 # Desired physical surface size, in pixels.
# Create surface of (width, height), and its window.
main_surface = pygame.display.set_mode((surface_sz, surface_sz))
# Set up some data to describe a small rectangle and its color
small_rect = (300, 200, 150, 90)
some_color = (255, 0, 0) # A color is a mix of (Red, Green, Blue)
while True:
ev = pygame.event.poll() # Look for any event
if ev.type == pygame.QUIT: # Window close button clicked?
break # ... leave game loop
# Update your game objects and data structures here...
# We draw everything from scratch on each frame.
# So first fill everything with the background color
main_surface.fill((0, 200, 255))
# Overpaint a smaller rectangle on the main surface
main_surface.fill(some_color, small_rect)
# Now the surface is ready, tell pygame to display it!
pygame.display.flip()
pygame.quit() # Once we leave the loop, close the window.
main()
The .exe file ran as it should when opened. However, some programs that I write are only partially functioning after the conversion.
One such program would be:
import pygame as pg
def main():
pg.init()
pg.display.set_caption('Some Caption')
screen = pg.display.set_mode((640, 480))
afont = pg.font.SysFont("some_font", 32)
done=False
while not done:
for event in pg.event.get():
if event.type == pg.QUIT:
done = True
screen.fill(0)
sometext = afont.render("Amazing text"
.format(0, 0), True, (250,200,250))
screen.blit(sometext, (10, 50))
pg.display.flip()
if __name__.endswith('__main__'):
main()
pg.quit()
After converted to exe, when I open it, some text about pygame appears and also the screen that is meant to pop up, showing the caption which I've set ('Some Caption'). The screen which popped up is however black and closes after a while, not showing what it should. However, I did get my exe file without any errors (which I could see anyway in the Output of the GUI which I used for the conversion i.e. auto py to exe). So in search of solutions I found this website:
https://nitratine.net/blog/post/issues-when-using-auto-py-to-exe/.
There were alot about error messages and general information but the thing I saw about program that opens but not doing what it should before closing was:
The Terminal Just Opens and Closes But There Are No Errors If you
double click to run your Python script, what happens? Does it open and
close also? That means this tool has done it's job correctly and the
script is finishing just like it should.
You most likely think the output should stay visible because you are
always using IDLE or an IDE and that's what those tools do. Add a
statement like input() at the end of your script to block execution
and wait for you to press enter before closing.
This, is not the solution for my problem since my program works if I double click on the python script. However, I think that it has a good point i.e that there might be something in my code that do not handle the conversion well, which is probable since the code from http://openbookproject.net/thinkcs/python/english3e/pygame.html did work after being converted to .exe when the same method was used.
My question is therefore, what is it that make my code not work after the conversion from .py to .exe?, and in that case, in what way might it be fixable?. The knowledge of what works and not when it comes to the converting .py to .exe would enable more programs to function correctly when they are .exe.
Thank you