I'm having an issue installing numpy on Windows 10 x64 with python 3.5.1. When I type pip install numpy, I get the error: unable to find vcvarsall.bat. I've also gotten this error from attempting to install other libraries.
From doing my research on the problem, I know it's related to the Visual C++ compiler for Python, or Visual Studio, as suggested in this answer and others: https://stackoverflow.com/a/10558328/1745715 I've installed both of these (Visual studio 2015, as it is my understanding that 2015 is what I want for python 3.5.1), and can verify that they have added values to my PATH. I've also rebooted the system since. No matter what I try, I still get the error when attempting to install numpy (and other packages) from pip. Could it be that I need a different version of Visual Studio for this version of Python?
I know there are many questions on SO involving similar situations, so before someone marks this a duplicate: I have read them all, and have not found any answer to work for me. Moreover, most of them do not relate to this environment (windows 10 x64, python 3.5.1). The nearest answer was one regarding Python 3.5 on Windows 10 x64 while installing numpy using pip, but the suggestion (to used a precompiled version of numpy and avoid the pip install) was unsatisfactory, as I have other libraries I have to install via pip that are also experiencing the same issues, so I need the compiler to work correctly.
Related
I use Python 3.4
I try to install Cython and Numba but keep getting "Unable to find vcvarsall.bat".
I googled for the solution and found that I need Microsoft Visual C++ 2010 installed (for Python 3.4).
So I installed it.
And tried installing Cython and Numba ---> fail.
And then they say I must type "SET VS90COMNTOOLS=%VS100COMNTOOLS%" in the command prompt, which I did, like C:\Users\Dorky>set vs90comntools=%vs100comntools%.
And tried installing Cython and Numba again ---> fail.
Not enough with that, I also went to the environment variables to set this VS90 to VS100 thing manually.
And tried installing Cython and Numba again ---> fail.
So how exactly can I solve this special "Unable to find vcvarsall.bat" problem?
What the heck is so special with this vcvarsall.bat that the user must install Microsoft's programs in order to use it?
Why not just extract out this vcvarsall.bat file as an independent file and then just copy&paste it to any file or directory that needs and not bother with the rest of the software package?
Why not the Python team just extract out this vcvarsall.bat and incorporate it into its Python packages so whenever a user installs Python, he/she will also install vcvarsall.bat along the way and then Python would also know where to look for this file in case needing to install Cython or Numba or any other?
If you're using the python.org version of Python, there's a much easier way to go about things - grab the packages you're interested in from Christoph Gohlke's Python Extension Packages for Windows repository. He has a very large selection of mainly scientific computing-based Python modules, including Cython and numba (you'll need numpy - compiled with Intel's MKL - and llvmlite - which requires this - as well). Everything is precompiled into .whl packages that can be installed with an up-to-date version of pip. Most modules are kept updated with the latest versions on PyPI or other repositories.
This is definitely my go-to site for installing packages on Windows, and if what I'm looking for isn't there, then I'll install via pip or the package source.
I am using Python 2.7.3 and trying to install the package numpy on my windows machine but I am getting a Runtime error that says Broken toolchain: cannot link to a simple C program. I read the solution here but it was specific to Mac OS. I tried installing numpy with pip as well as the setup.py install option but both the methods give the same error.
I recently installed Visual Studio 2008 and Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1 (this is necessary as VS 2008 does not provide a 64 bit compiler) to remove the "vcvarsall.bat not found" error. Are these two error related or am I missing something in the process? Please help!
Also, after installing VS 2008, I have VS90COMNTOOLS in the system variable. What can be the problem for Broken toolchain error?
I downloaded http://pytools.codeplex.com/ (Python Tools for Visual Studio) so that I could write Python in Visual Studio.
The problem is when I try to use the most basic package "numpy" like so:
import numpy
It says "No module named 'numpy'."
How can I use NumPy and SciPy in Visual Studio?
Note: I am using Canopy Express on another machine which works perfectly; however, I don't want to install it on this machine since I already have Visual Studio installed.
I added the Python 3.3 environment to my Python "solution" by right-clicking Python environments and clicking add an environment. But, after right-clicking my environment and clicking install Python package, I typed in "numpy" and got this error when trying to install it:
...
creating build
creating build\src.win32-3.3
creating build\src.win32-3.3\numpy
creating build\src.win32-3.3\numpy\distutils
building library "npymath" sources
No module named 'numpy.distutils.msvccompiler' in numpy.distutils; trying from distutils
error: Unable to find vcvarsall.bat
----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in c:\users\dom\appdata\local\temp\pip_build_Dom\numpy
Storing complete log in C:\Users\Dom\pip\pip.log
'numpy' failed to install. Exit code: 1
How can I install NumPy?
In Visual Studio 2013 Community Edition with a Python 2.7 environment, the following worked for me:
Open the Python Environments menu in Solution Explorer, and click on "Install Python Package..."
Then write "numpy":
Two solutions worked for me:
Going directly to my Python folder and installing the packages using pip.
Creating a virtual environment in my project and installing packages from within Visual Studio.
Consider using a more feature-rich Windows distribution of Python, like Anaconda. It comes with a boatload of packages included into the installer. This is quite handy for those who are new to Python, especially when they are using Windows.
Edit:
As of 2020, I would suggest using the python.org distribution of Python. Compiler issues on ms-windows have finally been fixed, so a lot of projects now provide binary packages (wheels) for ms-windows. Among others numpy, pandas, matplotlib, pillow, Cython and PyNaCl.
Note that wheel names ending in:
win_amd64.whl are for 64-bit versions of ms-windows, and
win32.whl are for 32-bit.
I actually ran into the same set of problems when trying to use Visual Studio for Python.
I managed to get things to work at the end - please see Using Visual Studio 2013 for Python (3.4) with NumPy and SciPy on Windows for details. Essentially you can either use the installer (if one is available) or use pip to do the installation.
Make sure C++ Common Tools are installed in Visual Studio:
See under Extra in the Visual Studio (Extra-Python-Interactive Window).
It has the ability to switch the interactive console through a different platform/Python version (32-bit, 64-bit, Debug, and Anaconda (which has the NumPy package)).
From PTVS Installation:
2. Installing packages individually
Here are some recommended packages. Generally you want to install packages using pip or through the interface in Visual Studio (which uses pip), as this will ensure that you get the latest version that will work with your version of Python, as well as any dependencies.
Some packages have complex dependencies and need to be downloaded manually, either from the project's website or from Christoph Gohlke's package collection.
I installed numpy and scipy from these links, and it works perfectly with Visual Studio.
numpy http://sourceforge.net/projects/numpy/files/NumPy/
scipy http://sourceforge.net/projects/scipy/files/scipy/
Matplotlib http://matplotlib.org/downloads.html
Pandas http://pandas.pydata.org/getpandas.html
Well, if anyone still has problem than what worked for me is:
C:/Users/DELL/AppData/Local/Programs/Python/Python39/python.exe -m pip install numpy
where the first part is simply the path of python.
Using pip install zipline on Windows 8 with Python 2.7 gives me the error:
Downloading/unpacking six (from python-dateutil==2.1->delorean->zipline[all])
Running setup.py egg_info for package six
Installing collected packages: blist, pytz, requests, python-dateutil, six
Running setup.py install for blist
building '_blist' extension
error: Unable to find vcvarsall.bat
Complete output from command C:\Python27\python.exe -c "import setuptools;__
file__='c:\\users\\ThatsMe\\appdata\\local\\temp\\pip-build-ThatsMe\\blist\\setup.py';ex
ec(compile(open(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" inst
all --record c:\users\ThatsMe\appdata\local\temp\pip-xvoky2-record\install-record.tx
t --single-version-externally-managed:
running install
running build
running build_py
running build_ext
building '_blist' extension
error: Unable to find vcvarsall.bat
Question: How can the error be resolved? Running pip install zipline[all] gives the same error...
The problem here is the line 292 (Using Python 3.4.3 here) in $python_install_prefix/Lib/distutils/msvc9compiler.py which says:
VERSION = get_build_version()
This only checks for the MSVC version that your python was built with. Just replacing this line with your actual Visual Studio version, eg. 12.0 for MSVC2013
VERSION = 12.0
will fix the issue.
UPDATE: Turns out that there is a good reason why this version is hardcoded. MSVC C runtime is not required to be compatible between major versions. Hence when you use a different VS version you might run into runtime problems. So I advise to use VS 2008 (for Python 2.6 up to 3.2) and VS2010 for (Python 3.3 and later) until this issue is sorted out.
Binary compatibility will arrive with VS 2015 (see here) along with Python 3.5 .
For Python 2.7 users Microsoft released a special Microsoft Visual C++ Compiler for Python 2.7 which can be used without installing the whole VS 2008.
You could use ol' good easy_install zipline instead.
easy_install isn't pip but one good aspect of it is the ability to download and install binary packages too, which would free you for the need having VC++ ready. This of course relies of the assumption that the binaries were prepared for your Python version.
UPDATE:
Yes, Pip can install binaries now!
There's a new binary Python archive format (wheel) that is supposed to replace "eggs". Wheels are already supported by pip. This means you'll be able to install zipline with pip without compiling it as soon as someone builds the wheel for your platform and uploads it to PyPI.
If you are getting this error on Python 2.7 you can now get the Microsoft Visual C++ Compiler for Python 2.7 as a stand alone download.
If you are on 3.3 or later you need to install Visual Studio 2010 express which is available for free here: https://www.visualstudio.com/downloads/download-visual-studio-vs#d-2010-express
If you are 3.3 or later and using a 64 bit version of python you need to install the Microsoft SDK 7.1 that ships a 64 bit compiler and follow the directions here Python PIP has issues with path for MS Visual Studio 2010 Express for 64-bit install on Windows 7
First, you should look for the file vcvarsall.bat in your system.
If it does not exist, I recommend you to install Microsoft Visual C++ Compiler for Python 2.7. This will create the vcvarsall.bat in "C:\Program Files (x86)\Common Files\Microsoft\Visual C++ for Python\9.0" if you install it for all users.
The problem now is in the function find_vcvarsall(version) in the C:/Python27/Lib/distutils/msvc9compiler.py module, which is looking for the vcvarsall.bat file.
Following the function calls you will see it is looking for an entry in the registry containing the path to the vcvarsall.bat file. It will never find it because this function is looking in other directories different from where the above-mentioned installation placed it, and in my case, the registry didn't exist.
The easiest way to solve this problem is to manually return the path of the vcvarsall.bat file. To do so, modify the function find_vcvarsall(version) in the msvc9compiler.py file with the absolute path to the vcvarsall.bat file like this:
def find_vcvarsall(version):
return r"C:\Program Files (x86)\Common Files\Microsoft\Visual C++ for Python\9.0\vcvarsall.bat"
This solution worked for me.
If you already have the vcvarsall.bat file you should check if you have the key productdir in the registry:
(HKEY_USERS, HKEY_CURRENT_USERS, HKEY_LOCAL_MACHINE or HKEY_CLASSES_ROOT)\Software\Wow6432Node\Microsoft\VisualStudio\version\Setup\VC
Where version = msvc9compiler.get_build_version()
If you don't have the key just do:
def find_vcvarsall(version):
return <path>\vcvarsall.bat
To understand the exact behavior check msvc9compiler.py module starting in the find_vcvarsall(version) function.
Simply because you don't have c++ compiler installed there in your machine, check the following
Download Microsoft Visual C++ 2008 from this page. That is a generally useful page anyway, so you should probably bookmark it. For Python 3.3+ use MS Visual C++ 2010.
Install it.
Open Windows explorer (the file browser) and search for the location of ‘vcvarsall.bat’ and cut it to your clipboard.
run regedit from the Windows start key. You will need admin privilges.
Add a registry entry to
HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\VisualStudio\9.0\Setup\VC\ProductDir (64 bit Windows) or
HKEY_LOCAL_MACHINE\Software\Microsoft\VisualStudio\9.0\Setup\VC\ProductDir (32 bit)
as described here.
Hint: 0.9 in the registery directory is the currently installed version of your visual studio, if you running VS 2013, you have to find the path HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\VisualStudio\12.0....
At the Windows start key, type cmd to get a command shell. If you need to, go to your virtual environment and run activate.bat.
pip install or whatever you use to install it.
You need to have Visual Studio's bin dir in your path. Pip install is trying to compile some C code.
I spent hours researching this vcvarsall.bat as well. Most answers on SO focus on Python 2.7 and / or creating workarounds by modifying system paths. None worked for me. This solution worked out of the box for Python 3.5 and (I think) is the "correct" way of doing it.
See this link -- it describes the Windows Compilers to use for different versions of Python: https://wiki.python.org/moin/WindowsCompilers#Microsoft_Visual_C.2B-.2B-_14.0_standalone:_Visual_C.2B-.2B-_Build_Tools_2015_.28x86.2C_x64.2C_ARM.29
For Python 3.5, download this: https://www.microsoft.com/en-us/download/details.aspx?id=49983
For me, I had to run C:\Program Files (x86)\Microsoft Visual C++ Build Tools\Visual C++ x64 Native Build Tools Command Prompt for it to work. From that command prompt, I ran "pip install django_compressor" which was the particular package that was causing me an issue, and it worked perfectly.
Hope this saves someone some time!
Thanks to "msoliman" for his hint, however his answer doesn't give clear solution for those who doesn't have VS2010
For example I have VS2012 and VS2013 and there are no such KEYs in system registry.
Solution:
Edit file: "[Python_install_loc]/Lib/distutils/msvc9compiler.py"
Change on line 224:
productdir = Reg.get_value(r"%s\Setup\VC" % vsbase,
"productdir")
to:
productdir = "C:\Program Files (x86)\Microsoft Visual Studio [your_vs_version(11/12...)]\VC"
and that should work
If you are trying to install matplotlib in order to work with graphs on python. Try this link.
https://github.com/jbmohler/matplotlib-winbuild.
This is a set of scripts to build matplotlib from source on the MS Windows platform.
To build & install matplotlib in your Python, do:
git clone https://github.com/matplotlib/matplotlib
git clone https://github.com/jbmohler/matplotlib-winbuild
$ python matplotlib-winbuild\buildall.py
The build script will auto-detect Python version & 32/64 bit automatically.
I appreciate this might not be the answer to resolving on 3.4 but I tried a huge variety of things to fix this on 3.4 and thought this might be useful if someone is time pressed or doesn't have the know-how to correct it (in my case, work demands).
With exactly the same setup, I found that my installation problems only happened with Python 3.4. When I changed to 2.7, all my issues seemed to be resolved.
We have a rather overzealous security setup though so I'm going to try the same on my home version (still 3.4) and see if I have any more joy. My inclination is that my VS version has somehow been restricted and the answers above should help. If I find anything more tonight I'll add further detail.
This is my first reply, not the most technical I'm afraid!
Not sure what I'm doing wrong but when I run pycrypto-2.6.win-amd64-py3.3.exe I get Python 3.3 is required, which I have just installed before I tried to install the crypto. I should also note that I have VS 2013 installed, as I'm reading that I may need to compile the whole thing or something.
Anyway, as an option I have a Fedora installed on a Virtual Box, not sure how use it though but if it is "easier" on Fedora I can try to install it there.
I'm actively searching for a solution but am short on time and would like some help. Thanks.
You probably installed 32bit version of Python - install 64bit version.
pycrypto-2.6.win-amd64-py3.3.exe is binary package which means it's already compiled so you don't need compiler to install it. If compilation were needed you would have to have the same version of Visual C++ which was used to build Python itself; in case of the official Python 3.3 that's Visual C++ 2010 not 2013. See What version of Visual Studio and/or MinGW do I need to build extension modules for a given version of Python? question for more details.