Related
I'm completing the 56th question on Project Euler:
A googol (10100) is a massive number: one followed by one-hundred zeros; 100100 is almost unimaginably large: one followed by two-hundred zeros. Despite their size, the sum of the digits in each number is only 1.
Considering natural numbers of the form, ab, where a, b < 100`, what is the maximum digital sum?
I wrote this code, which gives the wrong answer:
import math
value = 0
a = 1
b = 1
while a < 100:
b = 1
while b < 100:
result = int(math.pow(a,b))
x = [int(a) for a in str(result)]
if sum(x) > value:
value = sum(x)
b = b + 1
a = a + 1
print(value)
input("")
My code outputs 978, whereas the correct answer is
972
I already know the actual approach, but I don't know why my reasoning is incorrect. The value that gives me the greatest digital sum seems to be 8899, but adding together each digit in that result will give me 978. What am I misinterpreting in the question?
math.pow uses floating point numbers internally:
Unlike the built-in ** operator, math.pow() converts both its arguments to type float.
Note that Python integers have no size restriction, so there is no problem computing 88 ** 99 this way:
>>> from math import pow
>>> pow(88, 99)
3.1899548991064687e+192
>>> 88**99
3189954899106468738519431331435374548486457306565071277011188404860475359372836550565046276541670202826515718633320519821593616663471686151960018780508843851702573924250277584030257178740785152
And indeed, this is exactly what the documentation recommends:
Use ** or the built-in pow() function for computing exact integer powers.
The result computed using math.pow will be slightly different, due to the lack of precision of floating-point values:
>>> int(pow(88, 99))
3189954899106468677983468001676918389478607432406058411199358053788184470654582587122118156926366989707830958889227847846886750593566290713618113587727930256898153980172821794148406939795587072
It so happens that the sum of these digits is 978.
I need to calculate the square root of some numbers, for example √9 = 3 and √2 = 1.4142. How can I do it in Python?
The inputs will probably be all positive integers, and relatively small (say less than a billion), but just in case they're not, is there anything that might break?
Related
Integer square root in python
How to find integer nth roots?
Is there a short-hand for nth root of x in Python?
Difference between **(1/2), math.sqrt and cmath.sqrt?
Why is math.sqrt() incorrect for large numbers?
Python sqrt limit for very large numbers?
Which is faster in Python: x**.5 or math.sqrt(x)?
Why does Python give the "wrong" answer for square root? (specific to Python 2)
calculating n-th roots using Python 3's decimal module
How can I take the square root of -1 using python? (focused on NumPy)
Arbitrary precision of square roots
Note: This is an attempt at a canonical question after a discussion on Meta about an existing question with the same title.
Option 1: math.sqrt()
The math module from the standard library has a sqrt function to calculate the square root of a number. It takes any type that can be converted to float (which includes int) as an argument and returns a float.
>>> import math
>>> math.sqrt(9)
3.0
Option 2: Fractional exponent
The power operator (**) or the built-in pow() function can also be used to calculate a square root. Mathematically speaking, the square root of a equals a to the power of 1/2.
The power operator requires numeric types and matches the conversion rules for binary arithmetic operators, so in this case it will return either a float or a complex number.
>>> 9 ** (1/2)
3.0
>>> 9 ** .5 # Same thing
3.0
>>> 2 ** .5
1.4142135623730951
(Note: in Python 2, 1/2 is truncated to 0, so you have to force floating point arithmetic with 1.0/2 or similar. See Why does Python give the "wrong" answer for square root?)
This method can be generalized to nth root, though fractions that can't be exactly represented as a float (like 1/3 or any denominator that's not a power of 2) may cause some inaccuracy:
>>> 8 ** (1/3)
2.0
>>> 125 ** (1/3)
4.999999999999999
Edge cases
Negative and complex
Exponentiation works with negative numbers and complex numbers, though the results have some slight inaccuracy:
>>> (-25) ** .5 # Should be 5j
(3.061616997868383e-16+5j)
>>> 8j ** .5 # Should be 2+2j
(2.0000000000000004+2j)
Note the parentheses on -25! Otherwise it's parsed as -(25**.5) because exponentiation is more tightly binding than unary negation.
Meanwhile, math is only built for floats, so for x<0, math.sqrt(x) will raise ValueError: math domain error and for complex x, it'll raise TypeError: can't convert complex to float. Instead, you can use cmath.sqrt(x), which is more more accurate than exponentiation (and will likely be faster too):
>>> import cmath
>>> cmath.sqrt(-25)
5j
>>> cmath.sqrt(8j)
(2+2j)
Precision
Both options involve an implicit conversion to float, so floating point precision is a factor. For example:
>>> n = 10**30
>>> x = n**2
>>> root = x**.5
>>> n == root
False
>>> n - root # how far off are they?
0.0
>>> int(root) - n # how far off is the float from the int?
19884624838656
Very large numbers might not even fit in a float and you'll get OverflowError: int too large to convert to float. See Python sqrt limit for very large numbers?
Other types
Let's look at Decimal for example:
Exponentiation fails unless the exponent is also Decimal:
>>> decimal.Decimal('9') ** .5
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: unsupported operand type(s) for ** or pow(): 'decimal.Decimal' and 'float'
>>> decimal.Decimal('9') ** decimal.Decimal('.5')
Decimal('3.000000000000000000000000000')
Meanwhile, math and cmath will silently convert their arguments to float and complex respectively, which could mean loss of precision.
decimal also has its own .sqrt(). See also calculating n-th roots using Python 3's decimal module
SymPy
Depending on your goal, it might be a good idea to delay the calculation of square roots for as long as possible. SymPy might help.
SymPy is a Python library for symbolic mathematics.
import sympy
sympy.sqrt(2)
# => sqrt(2)
This doesn't seem very useful at first.
But sympy can give more information than floats or Decimals:
sympy.sqrt(8) / sympy.sqrt(27)
# => 2*sqrt(6)/9
Also, no precision is lost. (√2)² is still an integer:
s = sympy.sqrt(2)
s**2
# => 2
type(s**2)
#=> <class 'sympy.core.numbers.Integer'>
In comparison, floats and Decimals would return a number which is very close to 2 but not equal to 2:
(2**0.5)**2
# => 2.0000000000000004
from decimal import Decimal
(Decimal('2')**Decimal('0.5'))**Decimal('2')
# => Decimal('1.999999999999999999999999999')
Sympy also understands more complex examples like the Gaussian integral:
from sympy import Symbol, integrate, pi, sqrt, exp, oo
x = Symbol('x')
integrate(exp(-x**2), (x, -oo, oo))
# => sqrt(pi)
integrate(exp(-x**2), (x, -oo, oo)) == sqrt(pi)
# => True
Finally, if a decimal representation is desired, it's possible to ask for more digits than will ever be needed:
sympy.N(sympy.sqrt(2), 1_000_000)
# => 1.4142135623730950488016...........2044193016904841204
NumPy
>>> import numpy as np
>>> np.sqrt(25)
5.0
>>> np.sqrt([2, 3, 4])
array([1.41421356, 1.73205081, 2. ])
docs
Negative
For negative reals, it'll return nan, so np.emath.sqrt() is available for that case.
>>> a = np.array([4, -1, np.inf])
>>> np.sqrt(a)
<stdin>:1: RuntimeWarning: invalid value encountered in sqrt
array([ 2., nan, inf])
>>> np.emath.sqrt(a)
array([ 2.+0.j, 0.+1.j, inf+0.j])
Another option, of course, is to convert to complex first:
>>> a = a.astype(complex)
>>> np.sqrt(a)
array([ 2.+0.j, 0.+1.j, inf+0.j])
Newton's method
Most simple and accurate way to compute square root is Newton's method.
You have a number which you want to compute its square root (num) and you have a guess of its square root (estimate). Estimate can be any number bigger than 0, but a number that makes sense shortens the recursive call depth significantly.
new_estimate = (estimate + num/estimate) / 2
This line computes a more accurate estimate with those 2 parameters. You can pass new_estimate value to the function and compute another new_estimate which is more accurate than the previous one or you can make a recursive function definition like this.
def newtons_method(num, estimate):
# Computing a new_estimate
new_estimate = (estimate + num/estimate) / 2
print(new_estimate)
# Base Case: Comparing our estimate with built-in functions value
if new_estimate == math.sqrt(num):
return True
else:
return newtons_method(num, new_estimate)
For example we need to find 30's square root. We know that the result is between 5 and 6.
newtons_method(30,5)
number is 30 and estimate is 5. The result from each recursive calls are:
5.5
5.477272727272727
5.4772255752546215
5.477225575051661
The last result is the most accurate computation of the square root of number. It is the same value as the built-in function math.sqrt().
This answer was originally posted by gunesevitan, but is now deleted.
Python's fractions module and its class, Fraction, implement arithmetic with rational numbers. The Fraction class doesn't implement a square root operation, because most square roots are irrational numbers. However, it can be used to approximate a square root with arbitrary accuracy, because a Fraction's numerator and denominator are arbitrary-precision integers.
The following method takes a positive number x and a number of iterations, and returns upper and lower bounds for the square root of x.
from fractions import Fraction
def sqrt(x, n):
x = x if isinstance(x, Fraction) else Fraction(x)
upper = x + 1
for i in range(0, n):
upper = (upper + x/upper) / 2
lower = x / upper
if lower > upper:
raise ValueError("Sanity check failed")
return (lower, upper)
See the reference below for details on this operation's implementation. It also shows how to implement other operations with upper and lower bounds (although there is apparently at least one error with the log operation there).
Daumas, M., Lester, D., Muñoz, C., "Verified Real Number Calculations: A Library for Interval Arithmetic", arXiv:0708.3721 [cs.MS], 2007.
Alternatively, using Python's math.isqrt, we can calculate a square root to arbitrary precision:
Square root of i within 1/2n of the correct value, where i is an integer:Fraction(math.isqrt(i * 2**(n*2)), 2**n).
Square root of i within 1/10n of the correct value, where i is an integer:Fraction(math.isqrt(i * 10**(n*2)), 10**n).
Square root of x within 1/2n of the correct value, where x is a multiple of 1/2n:Fraction(math.isqrt(x * 2**(n)), 2**n).
Square root of x within 1/10n of the correct value, where x is a multiple of 1/10n:Fraction(math.isqrt(x * 10**(n)), 10**n).
In the foregoing, i or x must be 0 or greater.
Binary search
Disclaimer: this is for a more specialised use-case. This method might not be practical in all circumstances.
Benefits:
can find integer values (i.e. which integer is the root?)
no need to convert to float, so better precision (can be done that well too)
I personally implemented this one for a crypto CTF challenge (RSA cube root attack),where I needed a precise integer value.
The general idea can be extended to any other root.
def int_squareroot(d: int) -> tuple[int, bool]:
"""Try calculating integer squareroot and return if it's exact"""
left, right = 1, (d+1)//2
while left<right-1:
x = (left+right)//2
if x**2 > d:
left, right = left, x
else:
left, right = x, right
return left, left**2==d
EDIT:
As #wjandrea have also pointed out, **this example code can NOT compute **. This is a side-effect of the fact that it does not convert anything into floats, so no precision is lost. If the root is an integer, you get that back. If it's not, you get the biggest number whose square is smaller than your number. I updated the code so that it also returns a bool indicating if the value is correct or not, and also fixed an issue causing it to loop infinitely (also pointed out by #wjandrea). This implementation of the general method still works kindof weird for smaller numbers, but above 10 I had no problems with.
Overcoming the issues and limits of this method/implementation:
For smaller numbers, you can just use all the other methods from other answers. They generally use floats, which might be a loss of precision, but for small integers that should mean no problem at all. All of those methods that use floats have the same (or nearly the same) limit from this.
If you still want to use this method and get float results, it should be trivial to convert this to use floats too. Note that that will reintroduce precision loss, this method's unique benefit over the others, and in that case you can also just use any of the other answers. I think the newton's method version converges a bit faster, but I'm not sure.
For larger numbers, where loss of precision with floats come into play, this method can give results closer to the actual answer (depending on how big is the input). If you want to work with non-integers in this range, you can use other types, for example fixed precision numbers in this method too.
Edit 2, on other answers:
Currently, and afaik, the only other answer that has similar or better precision for large numbers than this implementation is the one that suggest SymPy, by Eric Duminil. That version is also easier to use, and work for any kind of number, the only downside is that it requires SymPy. My implementation is free from any huge dependencies if that is what you are looking for.
Arbitrary precision square root
This variation uses string manipulations to convert a string which represents a decimal floating-point number to an int, calls math.isqrt to do the actual square root extraction, and then formats the result as a decimal string. math.isqrt rounds down, so all produced digits are correct.
The input string, num, must use plain float format: 'e' notation is not supported. The num string can be a plain integer, and leading zeroes are ignored.
The digits argument specifies the number of decimal places in the result string, i.e., the number of digits after the decimal point.
from math import isqrt
def str_sqrt(num, digits):
""" Arbitrary precision square root
num arg must be a string
Return a string with `digits` after
the decimal point
Written by PM 2Ring 2022.01.26
"""
int_part , _, frac_part = num.partition('.')
num = int_part + frac_part
# Determine the required precision
width = 2 * digits - len(frac_part)
# Truncate or pad with zeroes
num = num[:width] if width < 0 else num + '0' * width
s = str(isqrt(int(num)))
if digits:
# Pad, if necessary
s = '0' * (1 + digits - len(s)) + s
s = f"{s[:-digits]}.{s[-digits:]}"
return s
Test
print(str_sqrt("2.0", 30))
Output
1.414213562373095048801688724209
For small numbers of digits, it's faster to use decimal.Decimal.sqrt. Around 32 digits or so, str_sqrt is roughly the same speed as Decimal.sqrt. But at 128 digits, str_sqrt is 2.2× faster than Decimal.sqrt, at 512 digits, it's 4.3× faster, at 8192 digits, it's 7.4× faster.
Here's a live version running on the SageMathCell server.
find square-root of a number
while True:
num = int(input("Enter a number:\n>>"))
for i in range(2, num):
if num % i == 0:
if i*i == num:
print("Square root of", num, "==>", i)
break
else:
kd = (num**0.5) # (num**(1/2))
print("Square root of", num, "==>", kd)
OUTPUT:-
Enter a number: 24
Square root of 24 ==> 4.898979485566356
Enter a number: 36
Square root of 36 ==> 6
Enter a number: 49
Square root of 49 ==> 7
✔ Output 💡 CLICK BELOW & SEE ✔
Let's consider this situation:
from math import sqrt
x = sqrt(19) # x : 4.358898943540674
print("{:.4f}".format(x))
# I don't want to get 4.3589
# I want to get 4.3588
The print() function rounds the number automatically, but I don't want this. What should I do?
If you want to round the number down to the 4th decimal place rather than round it to the nearest possibility, you could do the rounding yourself.
x = int(x * 10**4) / 10**4
print("{:.4f}".format(x))
This gives you
4.3588
Multiplying and later dividing by 10**4 shifts the number 4 decimal places, and the int function rounds down to an integer. Combining them all accomplishes what you want. There are some edge cases that will give an unexpected result due to floating point issues, but those will be rare.
Here is one way. truncate function courtesy of #user648852.
from math import sqrt, floor
def truncate(f, n):
return floor(f * 10 ** n) / 10 ** n
x = sqrt(19) # x : 4.358898943540674
print("{0}".format(truncate(x, 4)))
# 4.3588
Do more work initially and cut away a fixed number of excess digits:
from math import sqrt
x = sqrt(19) # x : 4.358898943540674
print(("{:.9f}".format(x))[:-5])
gives the desired result. This could still fail if x has the form ?.????999996 or similar, but the density of these numbers is rather small.
I want to remove digits from a float to have a fixed number of digits after the dot, like:
1.923328437452 → 1.923
I need to output as a string to another function, not print.
Also I want to ignore the lost digits, not round them.
round(1.923328437452, 3)
See Python's documentation on the standard types. You'll need to scroll down a bit to get to the round function. Essentially the second number says how many decimal places to round it to.
First, the function, for those who just want some copy-and-paste code:
def truncate(f, n):
'''Truncates/pads a float f to n decimal places without rounding'''
s = '{}'.format(f)
if 'e' in s or 'E' in s:
return '{0:.{1}f}'.format(f, n)
i, p, d = s.partition('.')
return '.'.join([i, (d+'0'*n)[:n]])
This is valid in Python 2.7 and 3.1+. For older versions, it's not possible to get the same "intelligent rounding" effect (at least, not without a lot of complicated code), but rounding to 12 decimal places before truncation will work much of the time:
def truncate(f, n):
'''Truncates/pads a float f to n decimal places without rounding'''
s = '%.12f' % f
i, p, d = s.partition('.')
return '.'.join([i, (d+'0'*n)[:n]])
Explanation
The core of the underlying method is to convert the value to a string at full precision and then just chop off everything beyond the desired number of characters. The latter step is easy; it can be done either with string manipulation
i, p, d = s.partition('.')
'.'.join([i, (d+'0'*n)[:n]])
or the decimal module
str(Decimal(s).quantize(Decimal((0, (1,), -n)), rounding=ROUND_DOWN))
The first step, converting to a string, is quite difficult because there are some pairs of floating point literals (i.e. what you write in the source code) which both produce the same binary representation and yet should be truncated differently. For example, consider 0.3 and 0.29999999999999998. If you write 0.3 in a Python program, the compiler encodes it using the IEEE floating-point format into the sequence of bits (assuming a 64-bit float)
0011111111010011001100110011001100110011001100110011001100110011
This is the closest value to 0.3 that can accurately be represented as an IEEE float. But if you write 0.29999999999999998 in a Python program, the compiler translates it into exactly the same value. In one case, you meant it to be truncated (to one digit) as 0.3, whereas in the other case you meant it to be truncated as 0.2, but Python can only give one answer. This is a fundamental limitation of Python, or indeed any programming language without lazy evaluation. The truncation function only has access to the binary value stored in the computer's memory, not the string you actually typed into the source code.1
If you decode the sequence of bits back into a decimal number, again using the IEEE 64-bit floating-point format, you get
0.2999999999999999888977697537484345957637...
so a naive implementation would come up with 0.2 even though that's probably not what you want. For more on floating-point representation error, see the Python tutorial.
It's very rare to be working with a floating-point value that is so close to a round number and yet is intentionally not equal to that round number. So when truncating, it probably makes sense to choose the "nicest" decimal representation out of all that could correspond to the value in memory. Python 2.7 and up (but not 3.0) includes a sophisticated algorithm to do just that, which we can access through the default string formatting operation.
'{}'.format(f)
The only caveat is that this acts like a g format specification, in the sense that it uses exponential notation (1.23e+4) if the number is large or small enough. So the method has to catch this case and handle it differently. There are a few cases where using an f format specification instead causes a problem, such as trying to truncate 3e-10 to 28 digits of precision (it produces 0.0000000002999999999999999980), and I'm not yet sure how best to handle those.
If you actually are working with floats that are very close to round numbers but intentionally not equal to them (like 0.29999999999999998 or 99.959999999999994), this will produce some false positives, i.e. it'll round numbers that you didn't want rounded. In that case the solution is to specify a fixed precision.
'{0:.{1}f}'.format(f, sys.float_info.dig + n + 2)
The number of digits of precision to use here doesn't really matter, it only needs to be large enough to ensure that any rounding performed in the string conversion doesn't "bump up" the value to its nice decimal representation. I think sys.float_info.dig + n + 2 may be enough in all cases, but if not that 2 might have to be increased, and it doesn't hurt to do so.
In earlier versions of Python (up to 2.6, or 3.0), the floating point number formatting was a lot more crude, and would regularly produce things like
>>> 1.1
1.1000000000000001
If this is your situation, if you do want to use "nice" decimal representations for truncation, all you can do (as far as I know) is pick some number of digits, less than the full precision representable by a float, and round the number to that many digits before truncating it. A typical choice is 12,
'%.12f' % f
but you can adjust this to suit the numbers you're using.
1Well... I lied. Technically, you can instruct Python to re-parse its own source code and extract the part corresponding to the first argument you pass to the truncation function. If that argument is a floating-point literal, you can just cut it off a certain number of places after the decimal point and return that. However this strategy doesn't work if the argument is a variable, which makes it fairly useless. The following is presented for entertainment value only:
def trunc_introspect(f, n):
'''Truncates/pads the float f to n decimal places by looking at the caller's source code'''
current_frame = None
caller_frame = None
s = inspect.stack()
try:
current_frame = s[0]
caller_frame = s[1]
gen = tokenize.tokenize(io.BytesIO(caller_frame[4][caller_frame[5]].encode('utf-8')).readline)
for token_type, token_string, _, _, _ in gen:
if token_type == tokenize.NAME and token_string == current_frame[3]:
next(gen) # left parenthesis
token_type, token_string, _, _, _ = next(gen) # float literal
if token_type == tokenize.NUMBER:
try:
cut_point = token_string.index('.') + n + 1
except ValueError: # no decimal in string
return token_string + '.' + '0' * n
else:
if len(token_string) < cut_point:
token_string += '0' * (cut_point - len(token_string))
return token_string[:cut_point]
else:
raise ValueError('Unable to find floating-point literal (this probably means you called {} with a variable)'.format(current_frame[3]))
break
finally:
del s, current_frame, caller_frame
Generalizing this to handle the case where you pass in a variable seems like a lost cause, since you'd have to trace backwards through the program's execution until you find the floating-point literal which gave the variable its value. If there even is one. Most variables will be initialized from user input or mathematical expressions, in which case the binary representation is all there is.
The result of round is a float, so watch out (example is from Python 2.6):
>>> round(1.923328437452, 3)
1.923
>>> round(1.23456, 3)
1.2350000000000001
You will be better off when using a formatted string:
>>> "%.3f" % 1.923328437452
'1.923'
>>> "%.3f" % 1.23456
'1.235'
n = 1.923328437452
str(n)[:4]
At my Python 2.7 prompt:
>>> int(1.923328437452 * 1000)/1000.0
1.923
The truely pythonic way of doing it is
from decimal import *
with localcontext() as ctx:
ctx.rounding = ROUND_DOWN
print Decimal('1.923328437452').quantize(Decimal('0.001'))
or shorter:
from decimal import Decimal as D, ROUND_DOWN
D('1.923328437452').quantize(D('0.001'), rounding=ROUND_DOWN)
Update
Usually the problem is not in truncating floats itself, but in the improper usage of float numbers before rounding.
For example: int(0.7*3*100)/100 == 2.09.
If you are forced to use floats (say, you're accelerating your code with numba), it's better to use cents as "internal representation" of prices: (70*3 == 210) and multiply/divide the inputs/outputs.
Simple python script -
n = 1.923328437452
n = float(int(n * 1000))
n /=1000
def trunc(num, digits):
sp = str(num).split('.')
return '.'.join([sp[0], sp[1][:digits]])
This should work. It should give you the truncation you are looking for.
So many of the answers given for this question are just completely wrong. They either round up floats (rather than truncate) or do not work for all cases.
This is the top Google result when I search for 'Python truncate float', a concept which is really straightforward, and which deserves better answers. I agree with Hatchkins that using the decimal module is the pythonic way of doing this, so I give here a function which I think answers the question correctly, and which works as expected for all cases.
As a side-note, fractional values, in general, cannot be represented exactly by binary floating point variables (see here for a discussion of this), which is why my function returns a string.
from decimal import Decimal, localcontext, ROUND_DOWN
def truncate(number, places):
if not isinstance(places, int):
raise ValueError("Decimal places must be an integer.")
if places < 1:
raise ValueError("Decimal places must be at least 1.")
# If you want to truncate to 0 decimal places, just do int(number).
with localcontext() as context:
context.rounding = ROUND_DOWN
exponent = Decimal(str(10 ** - places))
return Decimal(str(number)).quantize(exponent).to_eng_string()
>>> from math import floor
>>> floor((1.23658945) * 10**4) / 10**4
1.2365
# divide and multiply by 10**number of desired digits
If you fancy some mathemagic, this works for +ve numbers:
>>> v = 1.923328437452
>>> v - v % 1e-3
1.923
I did something like this:
from math import trunc
def truncate(number, decimals=0):
if decimals < 0:
raise ValueError('truncate received an invalid value of decimals ({})'.format(decimals))
elif decimals == 0:
return trunc(number)
else:
factor = float(10**decimals)
return trunc(number*factor)/factor
You can do:
def truncate(f, n):
return math.floor(f * 10 ** n) / 10 ** n
testing:
>>> f=1.923328437452
>>> [truncate(f, n) for n in range(5)]
[1.0, 1.9, 1.92, 1.923, 1.9233]
Just wanted to mention that the old "make round() with floor()" trick of
round(f) = floor(f+0.5)
can be turned around to make floor() from round()
floor(f) = round(f-0.5)
Although both these rules break around negative numbers, so using it is less than ideal:
def trunc(f, n):
if f > 0:
return "%.*f" % (n, (f - 0.5*10**-n))
elif f == 0:
return "%.*f" % (n, f)
elif f < 0:
return "%.*f" % (n, (f + 0.5*10**-n))
def precision(value, precision):
"""
param: value: takes a float
param: precision: int, number of decimal places
returns a float
"""
x = 10.0**precision
num = int(value * x)/ x
return num
precision(1.923328437452, 3)
1.923
Short and easy variant
def truncate_float(value, digits_after_point=2):
pow_10 = 10 ** digits_after_point
return (float(int(value * pow_10))) / pow_10
>>> truncate_float(1.14333, 2)
>>> 1.14
>>> truncate_float(1.14777, 2)
>>> 1.14
>>> truncate_float(1.14777, 4)
>>> 1.1477
When using a pandas df this worked for me
import math
def truncate(number, digits) -> float:
stepper = 10.0 ** digits
return math.trunc(stepper * number) / stepper
df['trunc'] = df['float_val'].apply(lambda x: truncate(x,1))
df['trunc']=df['trunc'].map('{:.1f}'.format)
int(16.5);
this will give an integer value of 16, i.e. trunc, won't be able to specify decimals, but guess you can do that by
import math;
def trunc(invalue, digits):
return int(invalue*math.pow(10,digits))/math.pow(10,digits);
Here is an easy way:
def truncate(num, res=3):
return (floor(num*pow(10, res)+0.5))/pow(10, res)
for num = 1.923328437452, this outputs 1.923
def trunc(f,n):
return ('%.16f' % f)[:(n-16)]
A general and simple function to use:
def truncate_float(number, length):
"""Truncate float numbers, up to the number specified
in length that must be an integer"""
number = number * pow(10, length)
number = int(number)
number = float(number)
number /= pow(10, length)
return number
There is an easy workaround in python 3. Where to cut I defined with an help variable decPlace to make it easy to adapt.
f = 1.12345
decPlace= 4
f_cut = int(f * 10**decPlace) /10**decPlace
Output:
f = 1.1234
Hope it helps.
Most answers are way too complicated in my opinion, how about this?
digits = 2 # Specify how many digits you want
fnum = '122.485221'
truncated_float = float(fnum[:fnum.find('.') + digits + 1])
>>> 122.48
Simply scanning for the index of '.' and truncate as desired (no rounding).
Convert string to float as final step.
Or in your case if you get a float as input and want a string as output:
fnum = str(122.485221) # convert float to string first
truncated_float = fnum[:fnum.find('.') + digits + 1] # string output
I think a better version would be just to find the index of decimal point . and then to take the string slice accordingly:
def truncate(number, n_digits:int=1)->float:
'''
:param number: real number ℝ
:param n_digits: Maximum number of digits after the decimal point after truncation
:return: truncated floating point number with at least one digit after decimal point
'''
decimalIndex = str(number).find('.')
if decimalIndex == -1:
return float(number)
else:
return float(str(number)[:decimalIndex+n_digits+1])
int(1.923328437452 * 1000) / 1000
>>> 1.923
int(1.9239 * 1000) / 1000
>>> 1.923
By multiplying the number by 1000 (10 ^ 3 for 3 digits) we shift the decimal point 3 places to the right and get 1923.3284374520001. When we convert that to an int the fractional part 3284374520001 will be discarded. Then we undo the shifting of the decimal point again by dividing by 1000 which returns 1.923.
use numpy.round
import numpy as np
precision = 3
floats = [1.123123123, 2.321321321321]
new_float = np.round(floats, precision)
Something simple enough to fit in a list-comprehension, with no libraries or other external dependencies. For Python >=3.6, it's very simple to write with f-strings.
The idea is to let the string-conversion do the rounding to one more place than you need and then chop off the last digit.
>>> nout = 3 # desired number of digits in output
>>> [f'{x:.{nout+1}f}'[:-1] for x in [2/3, 4/5, 8/9, 9/8, 5/4, 3/2]]
['0.666', '0.800', '0.888', '1.125', '1.250', '1.500']
Of course, there is rounding happening here (namely for the fourth digit), but rounding at some point is unvoidable. In case the transition between truncation and rounding is relevant, here's a slightly better example:
>>> nacc = 6 # desired accuracy (maximum 15!)
>>> nout = 3 # desired number of digits in output
>>> [f'{x:.{nacc}f}'[:-(nacc-nout)] for x in [2.9999, 2.99999, 2.999999, 2.9999999]]
>>> ['2.999', '2.999', '2.999', '3.000']
Bonus: removing zeros on the right
>>> nout = 3 # desired number of digits in output
>>> [f'{x:.{nout+1}f}'[:-1].rstrip('0') for x in [2/3, 4/5, 8/9, 9/8, 5/4, 3/2]]
['0.666', '0.8', '0.888', '1.125', '1.25', '1.5']
The core idea given here seems to me to be the best approach for this problem.
Unfortunately, it has received less votes while the later answer that has more votes is not complete (as observed in the comments). Hopefully, the implementation below provides a short and complete solution for truncation.
def trunc(num, digits):
l = str(float(num)).split('.')
digits = min(len(l[1]), digits)
return l[0] + '.' + l[1][:digits]
which should take care of all corner cases found here and here.
Am also a python newbie and after making use of some bits and pieces here, I offer my two cents
print str(int(time.time()))+str(datetime.now().microsecond)[:3]
str(int(time.time())) will take the time epoch as int and convert it to string and join with...
str(datetime.now().microsecond)[:3] which returns the microseconds only, convert to string and truncate to first 3 chars
# value value to be truncated
# n number of values after decimal
value = 0.999782
n = 3
float(int(value*1en))*1e-n
The documentation for the round() function states that you pass it a number, and the positions past the decimal to round. Thus it should do this:
n = 5.59
round(n, 1) # 5.6
But, in actuality, good old floating point weirdness creeps in and you get:
5.5999999999999996
For the purposes of UI, I need to display 5.6. I poked around the Internet and found some documentation that this is dependent on my implementation of Python. Unfortunately, this occurs on both my Windows dev machine and each Linux server I've tried. See here also.
Short of creating my own round library, is there any way around this?
I can't help the way it's stored, but at least formatting works correctly:
'%.1f' % round(n, 1) # Gives you '5.6'
Formatting works correctly even without having to round:
"%.1f" % n
If you use the Decimal module you can approximate without the use of the 'round' function. Here is what I've been using for rounding especially when writing monetary applications:
from decimal import Decimal, ROUND_UP
Decimal(str(16.2)).quantize(Decimal('.01'), rounding=ROUND_UP)
This will return a Decimal Number which is 16.20.
round(5.59, 1) is working fine. The problem is that 5.6 cannot be represented exactly in binary floating point.
>>> 5.6
5.5999999999999996
>>>
As Vinko says, you can use string formatting to do rounding for display.
Python has a module for decimal arithmetic if you need that.
You get '5.6' if you do str(round(n, 1)) instead of just round(n, 1).
You can switch the data type to an integer:
>>> n = 5.59
>>> int(n * 10) / 10.0
5.5
>>> int(n * 10 + 0.5)
56
And then display the number by inserting the locale's decimal separator.
However, Jimmy's answer is better.
Take a look at the Decimal module
Decimal “is based on a floating-point
model which was designed with people
in mind, and necessarily has a
paramount guiding principle –
computers must provide an arithmetic
that works in the same way as the
arithmetic that people learn at
school.” – excerpt from the decimal
arithmetic specification.
and
Decimal numbers can be represented
exactly. In contrast, numbers like 1.1
and 2.2 do not have an exact
representations in binary floating
point. End users typically would not
expect 1.1 + 2.2 to display as
3.3000000000000003 as it does with binary floating point.
Decimal provides the kind of operations that make it easy to write apps that require floating point operations and also need to present those results in a human readable format, e.g., accounting.
Floating point math is vulnerable to slight, but annoying, precision inaccuracies. If you can work with integer or fixed point, you will be guaranteed precision.
It's a big problem indeed. Try out this code:
print "%.2f" % (round((2*4.4+3*5.6+3*4.4)/8,2),)
It displays 4.85. Then you do:
print "Media = %.1f" % (round((2*4.4+3*5.6+3*4.4)/8,1),)
and it shows 4.8. Do you calculations by hand the exact answer is 4.85, but if you try:
print "Media = %.20f" % (round((2*4.4+3*5.6+3*4.4)/8,20),)
you can see the truth: the float point is stored as the nearest finite sum of fractions whose denominators are powers of two.
printf the sucker.
print '%.1f' % 5.59 # returns 5.6
I would avoid relying on round() at all in this case. Consider
print(round(61.295, 2))
print(round(1.295, 2))
will output
61.3
1.29
which is not a desired output if you need solid rounding to the nearest integer. To bypass this behavior go with math.ceil() (or math.floor() if you want to round down):
from math import ceil
decimal_count = 2
print(ceil(61.295 * 10 ** decimal_count) / 10 ** decimal_count)
print(ceil(1.295 * 10 ** decimal_count) / 10 ** decimal_count)
outputs
61.3
1.3
Hope that helps.
You can use the string format operator %, similar to sprintf.
mystring = "%.2f" % 5.5999
I am doing:
int(round( x , 0))
In this case, we first round properly at the unit level, then we convert to integer to avoid printing a float.
so
>>> int(round(5.59,0))
6
I think this answer works better than formating the string, and it also makes more sens to me to use the round function.
Works Perfect
format(5.59, '.1f') # to display
float(format(5.59, '.1f')) #to round
Another potential option is:
def hard_round(number, decimal_places=0):
"""
Function:
- Rounds a float value to a specified number of decimal places
- Fixes issues with floating point binary approximation rounding in python
Requires:
- `number`:
- Type: int|float
- What: The number to round
Optional:
- `decimal_places`:
- Type: int
- What: The number of decimal places to round to
- Default: 0
Example:
```
hard_round(5.6,1)
```
"""
return int(number*(10**decimal_places)+0.5)/(10**decimal_places)
Code:
x1 = 5.63
x2 = 5.65
print(float('%.2f' % round(x1,1))) # gives you '5.6'
print(float('%.2f' % round(x2,1))) # gives you '5.7'
Output:
5.6
5.7
The problem is only when last digit is 5. Eg. 0.045 is internally stored as 0.044999999999999... You could simply increment last digit to 6 and round off. This will give you the desired results.
import re
def custom_round(num, precision=0):
# Get the type of given number
type_num = type(num)
# If the given type is not a valid number type, raise TypeError
if type_num not in [int, float, Decimal]:
raise TypeError("type {} doesn't define __round__ method".format(type_num.__name__))
# If passed number is int, there is no rounding off.
if type_num == int:
return num
# Convert number to string.
str_num = str(num).lower()
# We will remove negative context from the number and add it back in the end
negative_number = False
if num < 0:
negative_number = True
str_num = str_num[1:]
# If number is in format 1e-12 or 2e+13, we have to convert it to
# to a string in standard decimal notation.
if 'e-' in str_num:
# For 1.23e-7, e_power = 7
e_power = int(re.findall('e-[0-9]+', str_num)[0][2:])
# For 1.23e-7, number = 123
number = ''.join(str_num.split('e-')[0].split('.'))
zeros = ''
# Number of zeros = e_power - 1 = 6
for i in range(e_power - 1):
zeros = zeros + '0'
# Scientific notation 1.23e-7 in regular decimal = 0.000000123
str_num = '0.' + zeros + number
if 'e+' in str_num:
# For 1.23e+7, e_power = 7
e_power = int(re.findall('e\+[0-9]+', str_num)[0][2:])
# For 1.23e+7, number_characteristic = 1
# characteristic is number left of decimal point.
number_characteristic = str_num.split('e+')[0].split('.')[0]
# For 1.23e+7, number_mantissa = 23
# mantissa is number right of decimal point.
number_mantissa = str_num.split('e+')[0].split('.')[1]
# For 1.23e+7, number = 123
number = number_characteristic + number_mantissa
zeros = ''
# Eg: for this condition = 1.23e+7
if e_power >= len(number_mantissa):
# Number of zeros = e_power - mantissa length = 5
for i in range(e_power - len(number_mantissa)):
zeros = zeros + '0'
# Scientific notation 1.23e+7 in regular decimal = 12300000.0
str_num = number + zeros + '.0'
# Eg: for this condition = 1.23e+1
if e_power < len(number_mantissa):
# In this case, we only need to shift the decimal e_power digits to the right
# So we just copy the digits from mantissa to characteristic and then remove
# them from mantissa.
for i in range(e_power):
number_characteristic = number_characteristic + number_mantissa[i]
number_mantissa = number_mantissa[i:]
# Scientific notation 1.23e+1 in regular decimal = 12.3
str_num = number_characteristic + '.' + number_mantissa
# characteristic is number left of decimal point.
characteristic_part = str_num.split('.')[0]
# mantissa is number right of decimal point.
mantissa_part = str_num.split('.')[1]
# If number is supposed to be rounded to whole number,
# check first decimal digit. If more than 5, return
# characteristic + 1 else return characteristic
if precision == 0:
if mantissa_part and int(mantissa_part[0]) >= 5:
return type_num(int(characteristic_part) + 1)
return type_num(characteristic_part)
# Get the precision of the given number.
num_precision = len(mantissa_part)
# Rounding off is done only if number precision is
# greater than requested precision
if num_precision <= precision:
return num
# Replace the last '5' with 6 so that rounding off returns desired results
if str_num[-1] == '5':
str_num = re.sub('5$', '6', str_num)
result = round(type_num(str_num), precision)
# If the number was negative, add negative context back
if negative_number:
result = result * -1
return result
Here's where I see round failing. What if you wanted to round these 2 numbers to one decimal place?
23.45
23.55
My education was that from rounding these you should get:
23.4
23.6
the "rule" being that you should round up if the preceding number was odd, not round up if the preceding number were even.
The round function in python simply truncates the 5.
Here is an easy way to round a float number to any number of decimal places, and it still works in 2021!
float_number = 12.234325335563
rounded = round(float_number, 3) # 3 is the number of decimal places to be returned.You can pass any number in place of 3 depending on how many decimal places you want to return.
print(rounded)
And this will print;
12.234
What about:
round(n,1)+epsilon