I am trying to install Pip as described here
When I run py get-pip.py I get the following error:
ERROR: pipenv 2018.11.26 requires virtualenv, which is not installed.
And if then i try to run pip -v, it says command not found
I dont know what could be the problem here. I ran the command in command prompt.
Edit: I also tried running command prompt in administrator mode. I am using py synonim for Windows 10
The link you provided says to use python get-pip.py instead of py get-pip.py. Maybe you can try this out.
Try typing this if you have single python version installed installed:
sudo apt install python*-pip
Here * can be either omitted or replaced by python version. Or if you think that you have pip, but it doesn't appear try running it as your current python module:
python* -m pip
As well as above, the * can be either omitted or replaced by python version
did you check if python is in your PATH environment ?
Python 3.8 Installation
and Did you check if you run it in the powershell?
pip Install in Windows 10 with Powershell
check your installation, I made it with a virtual machine.
I have a new Macbook - a user installed it, and then I installed a new user (mine), granted admin privileges and deleted the old one. I am on OS Catalina.
Since the installation I've been having several permission problems.
VSCode can't find Jupyter Notebook, pip installs packages at ~/Library/Python/3.7/site-packages.
When I do which python3 I get usr/bin/python3.
When I do pip3 install <package> I get: Defaulting to user installation because normal site-packages is not writeable And then it says it has already been installed, even though I can't access it when I do import <package>.
It's seems clear that this is a permission problem, pip can't install to the "base" python, and them python can't find what I've installed into ~/Library/Python/3.7/site-packages.
I've tried reinstalling the OS, but since I haven't done a clean install, it didn't change anything.
What am I missing?
How exactly can I fix permissions? Where do I want packages to be installed (venv sure, but some packages I want global (like jupyter).
As #TomdeGeus mentioned in the comments, this command works for me:
Python 3:
python3 -m pip install [package_name]
Python 2:
python -m pip install [package_name]
It's best to not use the system-provided Python directly. Leave that one alone since the OS can change it in undesired ways, as you experienced.
The best practice is to configure your own Python version(s) and manage them on a per-project basis using virtualenv (for Python 2) or venv, possibly via poetry, (for Python 3). This eliminates all dependency on the system-provided Python version, and also isolates each project from other projects on the machine.
Each project can have a different Python point version if needed, and gets its own site_packages directory so pip-installed libraries can also have different versions by project. This approach is a major problem-avoider.
python3.7 -m pip install [package_name]
(you should use the version that you have, of course)
solved it for me.
The most voted answer python3 -m pip install [package_name] does not help me here.
In my case, this was caused by a conflict with the dominating 3.6 version that was also installed as a default. You might ask yourself why you have 3.6 on your system, you will most probably not use that version now. The reason is that 3.6 is used as an independent default python version for many package installers. Those installers do not want to check which individual version you use and whether that fits, they just use 3.6 as a default, if you like it or not.
Here is a proof by example --upgrade pip:
pip3 install --upgrade pip
Defaulting to user installation because normal site-packages is not writeable
Requirement already satisfied: pip in
/home/USERNAME/.local/lib/python3.6/site-packages (20.3.1)
python3 -m pip install --upgrade pip
Defaulting to user installation because normal site-packages is not writeable
Requirement already satisfied: pip in
/home/USERNAME/.local/lib/python3.6/site-packages (20.3.1)
python3.7 -m pip install --upgrade pip
Collecting pip
Cache entry deserialization failed, entry ignored
Using cached https://files.pythonhosted.org/packages/ab/11/2dc62c5263d9eb322f2f028f7b56cd9d096bb8988fcf82d65fa2e4057afe/pip-20.3.1-py2.py3-none-any.whl
Installing collected packages: pip Successfully installed pip-20.3.1
I'm using Anaconda on Ubuntu and had the same problem.I fixed it by the following steps:
deactivating current environment
conda deactivate
Then, the base environment activates. I deactivated the base conda environment too. To do so, I used conda deactivate again.
Finally, I activate my project environment directly (instead of activating from the base environment) by the following command. Afterward, I installed the intended package successfully and worked perfectly.
conda activate myenv
pip install somepackage
sudo pip install
Worked for me. But pip install is not recommended to be run with sudo. The issue I was facing on BIGSUR was, it was using system python. Once I Installed python 3.9 using
brew install python#3.9
Then pip worked fine
For readers who thought themselves accidentally update system pip:
If you saw this info in your terminal output:
Defaulting to user installation because normal site-packages is not writeable
then you will be fine. Use the pip3 you just updated to run:
pyenv global system # since I use pyenv
pip3 uninstall pip # this one does the trick
Then you can check again pip3 --version will point to the original old (XCode/System-)pip. E.g. (2022/2/28):
pip 20.2.3 from /Applications/Xcode.app/Contents/Developer/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/site-packages/pip (python 3.8)
It occurs with me when I the virtual enviroment folder name was : venv.
in this case, It gives errors like :
No module pip
Default folder is unwritable
renaming the folder solve the proplem.
Check on the command line "which python" to see if it is the value you expect.
If you have a virtual environment activated, check /venv/bin/activate to see the value of VIRTUAL_ENV= and make sure it is the correct path . The path may be wrong if you renamed or moved the project. If the path is wrong, you can delete the venv and make a new one.
For me, none of the suggestions worked so I had to delete the current virtual environment folder venv and recreate it using one of the following commands:
python -m venv venv
python3 -m venv venv
Check the source of pip on Ubuntu 20.04
which pip
returns the correct path
/home/myname/fullstack/person_api/venv/bin/pip
UPDATE
I presume that some might encounter this problem because they set python path as environmental variable like this in ~/.bashrc:
python=/path/to/python
which you should not be doing! Instead we could do:
py=python
PATH=/path/to/python:$PATH
I bumped into this issue specifically because of this!
Had this same issue on a fresh install of Debian 9.12.
Rebooting my server solved the issue.
In my case on Linux, the ownership of the conda env directory had changed to another Linux user (long story), and so the the normal site-packages was not writeable due to a permissions issue.
The solution was to change ownership back to the user doing pip install.
I met exactly the same issue.
I just type sudo python3.8 -m pip install .... and the error disappeared.
If I remove the sudo, issue remains.
For those running on a Pi, that accidentally installed pip as root. Just chown the lib folder to the pi user:
sudo chown -R pi:pi /usr/local/lib/python3.9/
in my case python3 -m pip install [package_name] did not solve that.
in my case, it was a problem related to other processes occupying the directory.
I restart Pycharm and close any other program that might occupy this folder, and reinstalled the package in site-packages directory successfully.
When this problem occurred to me I have tried all the mentioned approaches but they don't seem to work.
Instead, restarting Python language server in my VSCode did the job - my SimPy package is now found. On Mac it is Cmd+Shift+P and select "Python: Restart Language Server".
Had similar issue on Ubuntu 20.04.4 LTS in VirtualBox, but none of the suggestions here worked for me.
I was trying to install open3d in a venv and every time I was getting
"Defaulting to user installation because normal site-packages is not writeable"
which at first I didn't even noticed. open3d was always being installed in /usr/bin/python3 environment. I've restarted the VM but without luck, so I guess the problem was not just missing write access.
So in VS Code, which was using the venv, importing open3d was not possible. But testing from terminal from the activated venv with python3 -c "import open3d as o3d; print(o3d.__version__)" was working fine and that confused me totally. I even broke my system pip installation using sudo, see further below if you want to know how to fix it.
Anyhow, the solution to my problem was to explicitly point to the python3 file in the venv where I wanted to install the package:
venv/bin/python3 -m pip install open3d
So I was testing out everything and eventually installed with sudo: sudo pip3 install open3d. This of course didn't solved the problem and open3d was still missing in the venv. Even worse, I got the message:
"WARNING: You are using pip version 21.3.1; however, version 22.0.4 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command."
So I did it but with sudo, updating the system pip and then found out here that this is not good:
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Following an advice here, I tried to revert to original version, only then pip3 broke:
sudo pip3 uninstall pip
sudo pip3 --version
sudo: pip3: command not found
The apt package was still there:
sudo apt install python3-pip python3-pip is already the newest version
(20.0.2-5ubuntu1.6).
So I had to reinstalled to fix the problem:
sudo apt-get remove python3-pip
sudo apt install python3-pip
Maybe you have python, python3, pip or pip3 aliased. In that case pip might not work well anymore, as the alias isn't always available and so pip/pip3 might resolve python/python3 differently compared to in your terminal.
That could give rise to pip/pip3 trying to install in the system python, and that could give rise to your error.
I tried ever single recommendation described here. In every instance, I get the exact same result: SyntaxError: invalid syntax (<stdin>, line 1)
I'm not sure who designed the system like this, but it seems basically useless, based on my experience so far. Either create a system that works, or don't create anything at all.
I have installed python 3.7 but still using and showing version of python 2.7 . I want to change it to 3.. I searched it but ı can't did it.
You should not change your syslink python to use python 3 because it is most likely that your system is using that syslink to python 2 for its own tasks and processes, if you change that, you may broke your system.
As Sammy said in a comment, you should use python3 to use that version.
On the pip side, it is probably that your python 3 does not have pip include (it should have it, but I have seen a lot of Python 3 without it). You can check if you have pip doing: python3 -m pip. The -m param is used to execute modules of python installed.
If you do not have pip installed, you can install it following this (which I recommend because always work): https://pip.pypa.io/en/stable/installing/
That is:
Download a script to install pip: curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Execute the script in order to install pip (with sudo because you're going to modify your system): sudo python3 get-pip.py
Now you should have pip installed and doing python3 -m pip again should show you the help of pip.
If you have pip already installed and no pip3 command in your system, you can always create an alias to python3 -m pip with the name pip3 and problem solved. Also if you don't know or do not want to create alias or executables in the /usr/bin folder, you can always keep using python3 -m pip.
PS: It is highly recommended to use virtualenvs when developing with python. If you do not know what it is, here it is a link to the docs: https://virtualenv.pypa.io/en/latest/
I usually work with pyCharm in which it is really easy to manage different python versions. (I use High Sierra, Mac)
In my settings I can see all of them and addon packages:
To be honest, I don't remember how I installed all of these, a bunch of them through brew though.
Now I am trying to run a Jupyter Notebook in python 3, it's using the python 3 kernel, but I am missing acp package.
So I pip install acp. ok.
The Notebook doesn't see the package. This makes me think it's not installing in the correct python version.
pip3 is not recognised as a command.
brew install python3 -> asks to update python 2 to version 3 (which I don't want).
I am quite confused now as how to intall the packages...
It may be installing with python executable your jupyter is not using.
you can directly install in jupyter shell by allowing python executable your jupyter is using:
import sys
!{sys.executable} -m pip install acp
To check your Python executables, you may open a terminal and type
touch ~/.bash_profile; open ~/.bash_profile
Then you will know which path your python exists in. Make sure to select the same path when you configure your project interpreter. Then you may like to upgrade your pip by typing in a terminal:
$ sudo pip install --upgrade pip
$ alias python=python3
$ python --version
Make sure python version is >3, after which that you may try:
pip3 install acp
I installed pipenv by following the instructions here. From the Windows command prompt I ran
pip install --user pipenv
which returned the message
Successfully installed pipenv-5.3.3
Now I want to install the requests package using pipenv, so I ran
pipenv install requests
but this returned
'pipenv' is not recognized as an internal or external command,
operable program or batch file.
I have added the path
C:\Users\Robert\AppData\Roaming\Python\Python35\site-packages
to my Windows path environment variable, but I still receive the same error.
How can I install the requests package using pipenv?
EDIT: As I have remnants of Python 3.5 and Python 3.6 on my system, I'm going to uninstall everything and start anew. (I've just started learning Python and I want to keep this as simple as possible.)
I have a similar setup and faced a similar problem, but the solution I found was fairly simple. All of my PATH variables were already correct (from Python 3 the Windows Installer automatically does all of this).
The problem
The problem actually arises because of conflicting installations of virtualenv.
Fix
To address this problem you need to simply run the following commands:
First, remove your current version of virtualenv: pip uninstall virtualenv
Then, remove your current version of pipenv: pip uninstall pipenv
When you are asked Proceed (y/n)? just enter y. This will give you a clean slate.
Finally, you can once again install pipenv and its dependencies: pip install pipenv
This will also install the latest version of virtualenv.
Testing if it worked
Just enter pipenv --version in the command prompt and you should see the desired output.
Notes
I know this sounds the mundane, but it is actually the solution for Windows systems. You do not need to modify any of your system environment variables (please do not add site-packages to your environment variables).
python -m pipenv may work for you, (or python3 -m pipenv or py 3 -m pipenv) this is telling python to run the module pipenv instead of the terminal shortcut which sometimes doesn't install properly.
Just to show they are equivalent when I installed pipenv and run which pipenv it points to a file like /Library/Frameworks/Python.framework/Versions/3.6/bin/pipenv which looks like this:
#!/Library/Frameworks/Python.framework/Versions/3.6/bin/python3.6
# -*- coding: utf-8 -*-
import re
import sys
from pipenv import cli
if __name__ == '__main__':
sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', sys.argv[0])
sys.exit(cli())
so it removes .pyw or .exe from the executable name then call pipenv.cli.cli(). It is likely there is a file like this on your machine it just didn't add python's /bin folder to your system PATH so it isn't accessible, there is usually a warning when installing python if this happens but no one checks those. :P
the module pipenv.__main__ which is run when using python -m pipenv looks like this:
from .cli import cli
if __name__ == '__main__':
cli()
Which calls pipenv.cli.cli(). So this main module absolutely does the same effective thing.
to solve this problem i need to start my CMD as administrator.
pip uninstall pipenv
pip install pipenv
To test this new configuration, you can write pipenv --version
Use python -m pipenv instead of just pipenv, it should work. Best of luck to you.
Try adding the following to Path environmental variable:
C:\Users\Robert\AppData\Roaming\Python\Python36\Scripts
instead of the \site-package, as that is where pipenv.exe is installed (at least for me).
use this cmd solve my problem :
python -m pipenv install django==2.1
Many thanks to #Srivats Shankar. In case you have tried what he said and it did not work, hope you did not forget to check your python path? If you have more than a single python version installed, doing pip uninstall virtualenv or pip uninstall pipenv might not help solve the problem.
Every python version is generally supposed to have its own pip installed. What you would do in this case is:
`-python -version_to_uninstall_virtualenv_from -m pip uninstall virtualenv; py --version -m pip uninstall virtualenv
-python -version_to_uninstall_pipenv_from -m pip uninstall pipenv; py --version -m pip uninstall pipenv`
Then you install pipenv with a similar command:
`-python -version_to_install_pipenv_on -m pip install pipenv; py --version -m pip uninstall pipenv`
I had an error like you sed and I just reinstalled pipenv and it fixed.
I used this command:
pip install pipenv
Instead of
C:\Users\Robert\AppData\Roaming\Python\Python35\site-packages
it should be
C:\Users\Robert\AppData\Roaming\Python\Python36\Scripts
after that, try closing and reopening the terminal
check warnings after installing pipenv. sometimes pipenv location not registered in environment variables.
I noticed several different situations with multiple python versions installed.
A preferred solution would be to use:
python -m pip install pipenv
This command for Python3.7 instance generates executables in
C:\Users\XXX\AppData\Local\Programs\Python\Python37\Scripts and it made setting up other packages easier.
Windows is not officially supported, I think.
ref: https://github.com/kennethreitz/pipenv/issues/70
Please check that pipenv is installed in your system by run following command in command promt:
pipenv --version
If it returns error, so please install again and set environment variable path in your system