We Keep Coding

Extracting a word between two path separators that comes after a specific word

I have the following path stored as a python string 'C:\ABC\DEF\GHI\App\Module\feature\src' and I would like to extract the word Module that is located between words \App\ and \feature\ in the path name. Note that there are file separators '\' in between which ought not to be extracted, but only the string Module has to be extracted.
I had the few ideas on how to do it:
Write a RegEx that matches a string between \App\ and \feature\
Write a RegEx that matches a string after \App\ --> App\\[A-Za-z0-9]*\\, and then split that matched string in order to find the Module.
I think the 1st solution is better, but that unfortunately it goes over my RegEx knowledge and I am not sure how to do it.
I would much appreciate any help.
Thank you in advance!

The regex you want is:
(?<=\\App\\).*?(?=\\feature\\)
Explanation of the regex:
(?<=behind)rest matches all instances of rest if there is behind immediately before it. It's called a positive lookbehind
rest(?=ahead) matches all instances of rest where there is ahead immediately after it. This is a positive lookahead.
\ is a reserved character in regex patterns, so to use them as part of the pattern itself, we have to escape it; hence, \\
.* matches any character, zero or more times.
? specifies that the match is not greedy (so we are implicitly assuming here that \feature\ only shows up once after \App\).
The pattern in general also assumes that there are no \ characters between \App\ and \feature\.
The full code would be something like:
str = 'C:\\ABC\\DEF\\GHI\\App\\Module\\feature\\src'
start = '\\App\\'
end = '\\feature\\'
pattern = rf"(?<=\{start}\).*?(?=\{end}\)"
print(pattern) # (?<=\\App\\).*?(?=\\feature\\)
print(re.search(pattern, str)[0]) # Module
A link on regex lookarounds that may be helpful: https://www.regular-expressions.info/lookaround.html

We can do that by str.find somethings like
str = 'C:\\ABC\\DEF\\GHI\\App\\Module\\feature\\src'
import re
start = '\\App\\'
end = '\\feature\\'
print( (str[str.find(start)+len(start):str.rfind(end)]))
print("\n")
output
Module

Your are looking for groups. With some small modificatians you can extract only the part between App and Feature.
(?:App\\\\)([A-Za-z0-9]*)(?:\\\\feature)
The brackets ( ) define a Match group which you can get by match.group(1). Using (?:foo) defines a non-matching group, e.g. one that is not included in your result. Try the expression here: https://regex101.com/r/24mkLO/1

Exact search of a string that has parenthesis using regex

I am new to regexes.
I have the following string : \n(941)\n364\nShackle\n(941)\nRivet\n105\nTop
Out of this string, I want to extract Rivet and I already have (941) as a string in a variable.
My thought process was like this:
Find all the (941)s
filter the results by checking if the string after (941) is followed by \n, followed by a word, and ending with \n
I made a regex for the 2nd part: \n[\w\s\'\d\-\/\.]+$\n.
The problem I am facing is that because of the parenthesis in (941) the regex is taking 941 as a group. In the 3rd step the regex may be wrong, which I can fix later, but 1st I needed help in finding the 2nd (941) so then I can apply the 3rd step on that.
PS.
I know I can use python string methods like find and then loop over the searches, but I wanted to see if this can be done directly using regex only.
I have tried the following regex: (?:...), (941){1} and the make regex literal character \ like this \(941\) with no useful results. Maybe I am using them wrong.
Just wanted to know if it is possible to be done using regex. Though it might be useful for others too or a good share for future viewers.
Thanks!

Assuming:
You want to avoid matching only digits;
Want to match a substring made of word-characters (thus including possible digits);
Try to escape the variable and use it in the regular expression through f-string:
import re
s = '\n(941)\n364\nShackle\n(941)\nRivet\n105\nTop'
var1 = '(941)'
var2 = re.escape(var1)
m = re.findall(fr'{var2}\n(?!\d+\n)(\w+)', s)[0]
print(m)
Prints:
Rivet

If you have text in a variable that should be matched exactly, use re.escape() to escape it when substituting into the regexp.
s = '\n(941)\n364\nShackle\n(941)\nRivet\n105\nTop'
num = '(941)'
re.findall(rf'(?<=\n{re.escape(num)}\n)[\w\s\'\d\-\/\.]+(?=\n)', s)
This puts (941)\n in a lookbehind, so it's not included in the match. This avoids a problem with the \n at the end of one match overlapping with the \n at the beginning of the next.

Trying to find the regex for this particular case? Also can I parse this without creating groups?

text to capture looks like this..
Policy Number ABCD000012345 other text follows in same line....
My regex looks like this
regex value='(?i)(?:[P|p]olicy\s[N|n]o[|:|;|,][\n\r\s\t]*[\na-z\sA-Z:,;\r\d\t]*[S|s]e\s*[H|h]abla\s*[^\n]*[\n\s\r\t]*|(?i)[P|p]olicy[\s\n\t\r]*[N|n]umber[\s\n\r\t]*)(?P<policy_number>[^\n]*)'
this particular case matches with the second or case.. however it is also capturing everything after the policy number. What can be the stopping condition for it to just grab the number. I know something is wrong but can't find a way out.
(?i)[P|p]olicy[\s\n\t\r]*[N|n]umber[\s\n\r\t]*)
current output
ABCD000012345othertextfollowsinsameline....
expected output
ABCD000012345

You may use a more simple regex, just finding from the beginning "[P|p]olicy\s*[N|n]umber\s*\b([A-Z]{4}\d+)\b.*" and use the word boundary \b
pattern = re.compile(r"[P|p]olicy\s*[N|n]umber\s*\b([A-Z0-9]+)\b.*")
line = "Policy Number ABCD000012345 other text follows in same line...."
matches = pattern.match(line)
id_res = matches.group(1)
print(id_res) # ABCD000012345
And if there's always 2 words before you can use (?:\w+\s+){2}\b([A-Z0-9]+)\b.*
Also \s is for [\r\n\t\f\v ] so no need to repeat them, your [\n\r\s\t] is just \s

you don't need the upper and lower case p and n specified since you're already specifying case insensitive.
Also \s already covers \n, \t and \r.
(?i)policy\s+number\s+([A-Z]{4}\d+)\b
for verification purpose: Regex
Another Solution:
^[\s\w]+\b([A-Z]{4}\d+)\b
for verification purpose: Regex
I like this better, in case your text changes from policy number

How to match digits only after a particular string, stop matching if non-digit is found - Python 27

I have huge string like this dsdasdludocid=15878284988193842600#lrd=0x3be04dcc5b5ac513:0xdc5b0011ebb625a8,2
I want to get the number after ludocid, only consecutive numbers.
I have tried this regex (ludocid).*(?=\d+\d+) and many more but no luck.

You can try ludocid=(\d+):
s = "dsdasdludocid=15878284988193842600#lrd=0x3be04dcc5b5ac513:0xdc5b0011ebb625a8,2"
import re
re.findall(r"ludocid=(\d+)", s)
# ['15878284988193842600']

You can use this regex:
ludocid\D*(\d+)
RegEx Demo
This will match literal ludocid followed by 0 or more non-digits and then it will match 1 or more digits in captured group #1
Code:
>>> s = 'dsdasdludocid=15878284988193842600#lrd=0x3be04dcc5b5ac513:0xdc5b0011ebb625a8,2'
>>> print re.search(r'ludocid\D*(\d+)', s).group(1)
15878284988193842600

It looks like you just threw a bunch of regex bits together... Let's work through that.
First, this is the correct regex: ludocid.(\d+)
(You would want to use it with re.search instead of re.match, by the way. Match requires the regex to match the entire string.)
But let's look at yours and see what went wrong and how we can get to the correct regex.
(ludocid).*(?=\d+\d+)
Imagine a regex as a function. You pass it the right things, and it gives you the appropriate result. When you wrap things in parentheses, you're saying "Find this and give it back to me." You don't need the ludocid given back to you, I'm guessing... so remove those paren.
ludocid.*(?=\d+\d+)
Now you've got a .*. This is dangerous in regular expressions because it literally says "Grab as many of anything as you possibly can!" Often I use the non-greedy version (.*?), but in this case it looks like we're just expecting a single extra character there. If you know the literal character you can use that, but to be safe I'll leave it as ., which says "Grab any one character."
ludocid.(?=\d+\d+)
Now let's go inside the parentheses. You've got \d+\d+, which says "Find a sequence of one or more digits, and then find another sequence of one or more digits." This equates to "Find a sequence of two or more digits." I don't think this is what you wanted (it's not how you described the problem, anyway), so let's reduce that:
ludocid.(?=\d+)
Okay, great. Now... what is (?=...) for? It's called a lookahead assertion. It says "If you find this string, match things in front of it." The example given in the Python 2.7 documentation is:
(?=...)
Matches if ... matches next, but doesn’t consume any of the string. This is called a lookahead assertion. For example, Isaac (?=Asimov) will match 'Isaac ' only if it’s followed by 'Asimov'.
Essentially this means that your regex will never return the digits. Instead, it looks to see if digits exist, and then it returns things from the rest of the regex. Remove the lookahead assertion and we're there:
ludocid.(\d+)
When you use this with re.search, you'll get the group you want:
>>> s = "dsdasdludocid=15878284988193842600#lrd=0x3be04dcc5b5ac513:0xdc5b0011ebb625a8,2"
>>> import re
>>> re.search(r"ludocid.(\d+)", s).group(1)
'15878284988193842600'

To match only the digits that follow, stopping at the first non-numeric char, try a positive look behind:
(?<=ludocid=)(\d+)
So:
re.findall(r"(?<=ludocid=)(\d+)", s)
The positive look behind will look for what you want, and only match if it is preceded by the 'flag' string.
**Note: **You may need to escape that second = sign like this: (?<=ludocid\=)(\d+)

Python regular expression to match # followed by 0-7 followed by ##

I would like to intercept string starting with \*#\*
followed by a number between 0 and 7
and ending with: ##
so something like \*#\*0##
but I could not find a regex for this

Assuming you want to allow only one # before and two after, I'd do it like this:
r'^(\#{1}([0-7])\#{2})'
It's important to note that Alex's regex will also match things like
###7######
########1###
which may or may not matter.
My regex above matches a string starting with #[0-7]## and ignores the end of the string. You could tack a $ onto the end if you wanted it to match only if that's the entire line.
The first backreference gives you the entire #<number>## string and the second backreference gives you the number inside the #.

None of the above examples are taking into account the *#*
^\*#\*[0-7]##$
Pass : *#*7##
Fail : *#*22324324##
Fail : *#3232#
The ^ character will match the start of the string, \* will match a single asterisk, the # characters do not need to be escape in this example, and finally the [0-7] will only match a single character between 0 and 7.

r'\#[0-7]\#\#'

The regular expression should be like ^#[0-7]##$

As I understand the question, the simplest regular expression you need is:
rex= re.compile(r'^\*#\*([0-7])##$')
The {1} constructs are redundant.
After doing rex.match (or rex.search, but it's not necessary here), .group(1) of the match object contains the digit given.
EDIT: The whole matched string is always available as match.group(0). If all you need is the complete string, drop any parentheses in the regular expression:
rex= re.compile(r'^\*#\*[0-7]##$')