Related
I have JSON file which contains followingly encoded strings:
"sender_name": "Horn\u00c3\u00adkov\u00c3\u00a1",
I am trying to parse this file using the json module. However I am not able to decode this string correctly.
What I get after decoding the JSON using .load() method is 'HornÃ\xadková'. The string should be correctly decoded as 'Horníková' instead.
I read the JSON specification and I understasnd that after \u there should be 4 hexadecimal numbers specifing Unicode number of character. But it seems that in this JSON file UTF-8 encoded bytes are stored as \u-sequences.
What type of encoding is this and how to correctly parse it in Python 3?
Is this type JSON file even valid JSON file according to the specification?
Your text is already encoded and you need to tell this to Python by using a b prefix in your string but since you're using json and the input needs to be string you have to decode your encoded text manually. Since your input is not byte you can use 'raw_unicode_escape' encoding to convert the string to byte without encoding and prevent the open method to use its own default encoding. Then you can simply use aforementioned approach to get the desired result.
Note that since you need to do the encoding and decoding your have to read file content and perform the encoding on loaded string, then you should use json.loads() instead of json.load().
In [168]: with open('test.json', encoding='raw_unicode_escape') as f:
...: d = json.loads(f.read().encode('raw_unicode_escape').decode())
...:
In [169]: d
Out[169]: {'sender_name': 'Horníková'}
The JSON you are reading was written incorrectly and the Unicode strings decoded from it will have to be re-encoded with the wrong encoding used, then decoded with the correct encoding.
Here's an example:
#!python3
import json
# The bad JSON you have
bad_json = r'{"sender_name": "Horn\u00c3\u00adkov\u00c3\u00a1"}'
print('bad_json =',bad_json)
# The wanted result from json.loads()
wanted = {'sender_name':'Horníková'}
# What correctly written JSON should look like
good_json = json.dumps(wanted)
print('good_json =',good_json)
# What you get when loading the bad JSON.
got = json.loads(bad_json)
print('wanted =',wanted)
print('got =',got)
# How to correct the mojibake string
corrected_sender = got['sender_name'].encode('latin1').decode('utf8')
print('corrected_sender =',corrected_sender)
Output:
bad_json = {"sender_name": "Horn\u00c3\u00adkov\u00c3\u00a1"}
good_json = {"sender_name": "Horn\u00edkov\u00e1"}
wanted = {'sender_name': 'Horníková'}
got = {'sender_name': 'HornÃ\xadková'}
corrected_sender = Horníková
I don't know enough about JSON to be able to say whether this is valid or not, but you can parse these strings using the raw_unicode_escape codec:
>>> "Horn\u00c3\u00adkov\u00c3\u00a1".encode('raw_unicode_escape').decode('utf8')
'Horníková'
Reencode to bytes, and then redecode to text.
>>> 'HornÃ\xadková'.encode('latin-1').decode('utf-8')
'Horníková'
Is this type JSON file even valid JSON file according to the specification?
No.
A string is a sequence of zero or more Unicode characters, wrapped in double quotes, using backslash escapes [emphasis added].
source
A string is a sequence of Unicode code points wrapped with quotation marks (U+0022). [...] Any code point may be represented as a hexadecimal escape sequence [...] represented as a six-character sequence: a reverse solidus, followed by the lowercase letter u, followed by four hexadecimal digits that encode the code point [emphasis added].
source
UTF-8 byte sequences are neither Unicode characters nor Unicode code points.
Apparently, the following is the valid syntax:
b'The string'
I would like to know:
What does this b character in front of the string mean?
What are the effects of using it?
What are appropriate situations to use it?
I found a related question right here on SO, but that question is about PHP though, and it states the b is used to indicate the string is binary, as opposed to Unicode, which was needed for code to be compatible from version of PHP < 6, when migrating to PHP 6. I don't think this applies to Python.
I did find this documentation on the Python site about using a u character in the same syntax to specify a string as Unicode. Unfortunately, it doesn't mention the b character anywhere in that document.
Also, just out of curiosity, are there more symbols than the b and u that do other things?
Python 3.x makes a clear distinction between the types:
str = '...' literals = a sequence of Unicode characters (Latin-1, UCS-2 or UCS-4, depending on the widest character in the string)
bytes = b'...' literals = a sequence of octets (integers between 0 and 255)
If you're familiar with:
Java or C#, think of str as String and bytes as byte[];
SQL, think of str as NVARCHAR and bytes as BINARY or BLOB;
Windows registry, think of str as REG_SZ and bytes as REG_BINARY.
If you're familiar with C(++), then forget everything you've learned about char and strings, because a character is not a byte. That idea is long obsolete.
You use str when you want to represent text.
print('שלום עולם')
You use bytes when you want to represent low-level binary data like structs.
NaN = struct.unpack('>d', b'\xff\xf8\x00\x00\x00\x00\x00\x00')[0]
You can encode a str to a bytes object.
>>> '\uFEFF'.encode('UTF-8')
b'\xef\xbb\xbf'
And you can decode a bytes into a str.
>>> b'\xE2\x82\xAC'.decode('UTF-8')
'€'
But you can't freely mix the two types.
>>> b'\xEF\xBB\xBF' + 'Text with a UTF-8 BOM'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: can't concat bytes to str
The b'...' notation is somewhat confusing in that it allows the bytes 0x01-0x7F to be specified with ASCII characters instead of hex numbers.
>>> b'A' == b'\x41'
True
But I must emphasize, a character is not a byte.
>>> 'A' == b'A'
False
In Python 2.x
Pre-3.0 versions of Python lacked this kind of distinction between text and binary data. Instead, there was:
unicode = u'...' literals = sequence of Unicode characters = 3.x str
str = '...' literals = sequences of confounded bytes/characters
Usually text, encoded in some unspecified encoding.
But also used to represent binary data like struct.pack output.
In order to ease the 2.x-to-3.x transition, the b'...' literal syntax was backported to Python 2.6, in order to allow distinguishing binary strings (which should be bytes in 3.x) from text strings (which should be str in 3.x). The b prefix does nothing in 2.x, but tells the 2to3 script not to convert it to a Unicode string in 3.x.
So yes, b'...' literals in Python have the same purpose that they do in PHP.
Also, just out of curiosity, are there
more symbols than the b and u that do
other things?
The r prefix creates a raw string (e.g., r'\t' is a backslash + t instead of a tab), and triple quotes '''...''' or """...""" allow multi-line string literals.
To quote the Python 2.x documentation:
A prefix of 'b' or 'B' is ignored in
Python 2; it indicates that the
literal should become a bytes literal
in Python 3 (e.g. when code is
automatically converted with 2to3). A
'u' or 'b' prefix may be followed by
an 'r' prefix.
The Python 3 documentation states:
Bytes literals are always prefixed with 'b' or 'B'; they produce an instance of the bytes type instead of the str type. They may only contain ASCII characters; bytes with a numeric value of 128 or greater must be expressed with escapes.
The b denotes a byte string.
Bytes are the actual data. Strings are an abstraction.
If you had multi-character string object and you took a single character, it would be a string, and it might be more than 1 byte in size depending on encoding.
If took 1 byte with a byte string, you'd get a single 8-bit value from 0-255 and it might not represent a complete character if those characters due to encoding were > 1 byte.
TBH I'd use strings unless I had some specific low level reason to use bytes.
From server side, if we send any response, it will be sent in the form of byte type, so it will appear in the client as b'Response from server'
In order get rid of b'....' simply use below code:
Server file:
stri="Response from server"
c.send(stri.encode())
Client file:
print(s.recv(1024).decode())
then it will print Response from server
The answer to the question is that, it does:
data.encode()
and in order to decode it(remove the b, because sometimes you don't need it)
use:
data.decode()
Here's an example where the absence of b would throw a TypeError exception in Python 3.x
>>> f=open("new", "wb")
>>> f.write("Hello Python!")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'str' does not support the buffer interface
Adding a b prefix would fix the problem.
It turns it into a bytes literal (or str in 2.x), and is valid for 2.6+.
The r prefix causes backslashes to be "uninterpreted" (not ignored, and the difference does matter).
In addition to what others have said, note that a single character in unicode can consist of multiple bytes.
The way unicode works is that it took the old ASCII format (7-bit code that looks like 0xxx xxxx) and added multi-bytes sequences where all bytes start with 1 (1xxx xxxx) to represent characters beyond ASCII so that Unicode would be backwards-compatible with ASCII.
>>> len('Öl') # German word for 'oil' with 2 characters
2
>>> 'Öl'.encode('UTF-8') # convert str to bytes
b'\xc3\x96l'
>>> len('Öl'.encode('UTF-8')) # 3 bytes encode 2 characters !
3
You can use JSON to convert it to dictionary
import json
data = b'{"key":"value"}'
print(json.loads(data))
{"key":"value"}
FLASK:
This is an example from flask. Run this on terminal line:
import requests
requests.post(url='http://localhost(example)/',json={'key':'value'})
In flask/routes.py
#app.route('/', methods=['POST'])
def api_script_add():
print(request.data) # --> b'{"hi":"Hello"}'
print(json.loads(request.data))
return json.loads(request.data)
{'key':'value'}
b"hello" is not a string (even though it looks like one), but a byte sequence. It is a sequence of 5 numbers, which, if you mapped them to a character table, would look like h e l l o. However the value itself is not a string, Python just has a convenient syntax for defining byte sequences using text characters rather than the numbers itself. This saves you some typing, and also often byte sequences are meant to be interpreted as characters. However, this is not always the case - for example, reading a JPG file will produce a sequence of nonsense letters inside b"..." because JPGs have a non-text structure.
.encode() and .decode() convert between strings and bytes.
bytes(somestring.encode()) is the solution that worked for me in python 3.
def compare_types():
output = b'sometext'
print(output)
print(type(output))
somestring = 'sometext'
encoded_string = somestring.encode()
output = bytes(encoded_string)
print(output)
print(type(output))
compare_types()
Apparently, the following is the valid syntax:
b'The string'
I would like to know:
What does this b character in front of the string mean?
What are the effects of using it?
What are appropriate situations to use it?
I found a related question right here on SO, but that question is about PHP though, and it states the b is used to indicate the string is binary, as opposed to Unicode, which was needed for code to be compatible from version of PHP < 6, when migrating to PHP 6. I don't think this applies to Python.
I did find this documentation on the Python site about using a u character in the same syntax to specify a string as Unicode. Unfortunately, it doesn't mention the b character anywhere in that document.
Also, just out of curiosity, are there more symbols than the b and u that do other things?
Python 3.x makes a clear distinction between the types:
str = '...' literals = a sequence of Unicode characters (Latin-1, UCS-2 or UCS-4, depending on the widest character in the string)
bytes = b'...' literals = a sequence of octets (integers between 0 and 255)
If you're familiar with:
Java or C#, think of str as String and bytes as byte[];
SQL, think of str as NVARCHAR and bytes as BINARY or BLOB;
Windows registry, think of str as REG_SZ and bytes as REG_BINARY.
If you're familiar with C(++), then forget everything you've learned about char and strings, because a character is not a byte. That idea is long obsolete.
You use str when you want to represent text.
print('שלום עולם')
You use bytes when you want to represent low-level binary data like structs.
NaN = struct.unpack('>d', b'\xff\xf8\x00\x00\x00\x00\x00\x00')[0]
You can encode a str to a bytes object.
>>> '\uFEFF'.encode('UTF-8')
b'\xef\xbb\xbf'
And you can decode a bytes into a str.
>>> b'\xE2\x82\xAC'.decode('UTF-8')
'€'
But you can't freely mix the two types.
>>> b'\xEF\xBB\xBF' + 'Text with a UTF-8 BOM'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: can't concat bytes to str
The b'...' notation is somewhat confusing in that it allows the bytes 0x01-0x7F to be specified with ASCII characters instead of hex numbers.
>>> b'A' == b'\x41'
True
But I must emphasize, a character is not a byte.
>>> 'A' == b'A'
False
In Python 2.x
Pre-3.0 versions of Python lacked this kind of distinction between text and binary data. Instead, there was:
unicode = u'...' literals = sequence of Unicode characters = 3.x str
str = '...' literals = sequences of confounded bytes/characters
Usually text, encoded in some unspecified encoding.
But also used to represent binary data like struct.pack output.
In order to ease the 2.x-to-3.x transition, the b'...' literal syntax was backported to Python 2.6, in order to allow distinguishing binary strings (which should be bytes in 3.x) from text strings (which should be str in 3.x). The b prefix does nothing in 2.x, but tells the 2to3 script not to convert it to a Unicode string in 3.x.
So yes, b'...' literals in Python have the same purpose that they do in PHP.
Also, just out of curiosity, are there
more symbols than the b and u that do
other things?
The r prefix creates a raw string (e.g., r'\t' is a backslash + t instead of a tab), and triple quotes '''...''' or """...""" allow multi-line string literals.
To quote the Python 2.x documentation:
A prefix of 'b' or 'B' is ignored in
Python 2; it indicates that the
literal should become a bytes literal
in Python 3 (e.g. when code is
automatically converted with 2to3). A
'u' or 'b' prefix may be followed by
an 'r' prefix.
The Python 3 documentation states:
Bytes literals are always prefixed with 'b' or 'B'; they produce an instance of the bytes type instead of the str type. They may only contain ASCII characters; bytes with a numeric value of 128 or greater must be expressed with escapes.
The b denotes a byte string.
Bytes are the actual data. Strings are an abstraction.
If you had multi-character string object and you took a single character, it would be a string, and it might be more than 1 byte in size depending on encoding.
If took 1 byte with a byte string, you'd get a single 8-bit value from 0-255 and it might not represent a complete character if those characters due to encoding were > 1 byte.
TBH I'd use strings unless I had some specific low level reason to use bytes.
From server side, if we send any response, it will be sent in the form of byte type, so it will appear in the client as b'Response from server'
In order get rid of b'....' simply use below code:
Server file:
stri="Response from server"
c.send(stri.encode())
Client file:
print(s.recv(1024).decode())
then it will print Response from server
The answer to the question is that, it does:
data.encode()
and in order to decode it(remove the b, because sometimes you don't need it)
use:
data.decode()
Here's an example where the absence of b would throw a TypeError exception in Python 3.x
>>> f=open("new", "wb")
>>> f.write("Hello Python!")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'str' does not support the buffer interface
Adding a b prefix would fix the problem.
It turns it into a bytes literal (or str in 2.x), and is valid for 2.6+.
The r prefix causes backslashes to be "uninterpreted" (not ignored, and the difference does matter).
In addition to what others have said, note that a single character in unicode can consist of multiple bytes.
The way unicode works is that it took the old ASCII format (7-bit code that looks like 0xxx xxxx) and added multi-bytes sequences where all bytes start with 1 (1xxx xxxx) to represent characters beyond ASCII so that Unicode would be backwards-compatible with ASCII.
>>> len('Öl') # German word for 'oil' with 2 characters
2
>>> 'Öl'.encode('UTF-8') # convert str to bytes
b'\xc3\x96l'
>>> len('Öl'.encode('UTF-8')) # 3 bytes encode 2 characters !
3
You can use JSON to convert it to dictionary
import json
data = b'{"key":"value"}'
print(json.loads(data))
{"key":"value"}
FLASK:
This is an example from flask. Run this on terminal line:
import requests
requests.post(url='http://localhost(example)/',json={'key':'value'})
In flask/routes.py
#app.route('/', methods=['POST'])
def api_script_add():
print(request.data) # --> b'{"hi":"Hello"}'
print(json.loads(request.data))
return json.loads(request.data)
{'key':'value'}
b"hello" is not a string (even though it looks like one), but a byte sequence. It is a sequence of 5 numbers, which, if you mapped them to a character table, would look like h e l l o. However the value itself is not a string, Python just has a convenient syntax for defining byte sequences using text characters rather than the numbers itself. This saves you some typing, and also often byte sequences are meant to be interpreted as characters. However, this is not always the case - for example, reading a JPG file will produce a sequence of nonsense letters inside b"..." because JPGs have a non-text structure.
.encode() and .decode() convert between strings and bytes.
bytes(somestring.encode()) is the solution that worked for me in python 3.
def compare_types():
output = b'sometext'
print(output)
print(type(output))
somestring = 'sometext'
encoded_string = somestring.encode()
output = bytes(encoded_string)
print(output)
print(type(output))
compare_types()
Apparently, the following is the valid syntax:
b'The string'
I would like to know:
What does this b character in front of the string mean?
What are the effects of using it?
What are appropriate situations to use it?
I found a related question right here on SO, but that question is about PHP though, and it states the b is used to indicate the string is binary, as opposed to Unicode, which was needed for code to be compatible from version of PHP < 6, when migrating to PHP 6. I don't think this applies to Python.
I did find this documentation on the Python site about using a u character in the same syntax to specify a string as Unicode. Unfortunately, it doesn't mention the b character anywhere in that document.
Also, just out of curiosity, are there more symbols than the b and u that do other things?
Python 3.x makes a clear distinction between the types:
str = '...' literals = a sequence of Unicode characters (Latin-1, UCS-2 or UCS-4, depending on the widest character in the string)
bytes = b'...' literals = a sequence of octets (integers between 0 and 255)
If you're familiar with:
Java or C#, think of str as String and bytes as byte[];
SQL, think of str as NVARCHAR and bytes as BINARY or BLOB;
Windows registry, think of str as REG_SZ and bytes as REG_BINARY.
If you're familiar with C(++), then forget everything you've learned about char and strings, because a character is not a byte. That idea is long obsolete.
You use str when you want to represent text.
print('שלום עולם')
You use bytes when you want to represent low-level binary data like structs.
NaN = struct.unpack('>d', b'\xff\xf8\x00\x00\x00\x00\x00\x00')[0]
You can encode a str to a bytes object.
>>> '\uFEFF'.encode('UTF-8')
b'\xef\xbb\xbf'
And you can decode a bytes into a str.
>>> b'\xE2\x82\xAC'.decode('UTF-8')
'€'
But you can't freely mix the two types.
>>> b'\xEF\xBB\xBF' + 'Text with a UTF-8 BOM'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: can't concat bytes to str
The b'...' notation is somewhat confusing in that it allows the bytes 0x01-0x7F to be specified with ASCII characters instead of hex numbers.
>>> b'A' == b'\x41'
True
But I must emphasize, a character is not a byte.
>>> 'A' == b'A'
False
In Python 2.x
Pre-3.0 versions of Python lacked this kind of distinction between text and binary data. Instead, there was:
unicode = u'...' literals = sequence of Unicode characters = 3.x str
str = '...' literals = sequences of confounded bytes/characters
Usually text, encoded in some unspecified encoding.
But also used to represent binary data like struct.pack output.
In order to ease the 2.x-to-3.x transition, the b'...' literal syntax was backported to Python 2.6, in order to allow distinguishing binary strings (which should be bytes in 3.x) from text strings (which should be str in 3.x). The b prefix does nothing in 2.x, but tells the 2to3 script not to convert it to a Unicode string in 3.x.
So yes, b'...' literals in Python have the same purpose that they do in PHP.
Also, just out of curiosity, are there
more symbols than the b and u that do
other things?
The r prefix creates a raw string (e.g., r'\t' is a backslash + t instead of a tab), and triple quotes '''...''' or """...""" allow multi-line string literals.
To quote the Python 2.x documentation:
A prefix of 'b' or 'B' is ignored in
Python 2; it indicates that the
literal should become a bytes literal
in Python 3 (e.g. when code is
automatically converted with 2to3). A
'u' or 'b' prefix may be followed by
an 'r' prefix.
The Python 3 documentation states:
Bytes literals are always prefixed with 'b' or 'B'; they produce an instance of the bytes type instead of the str type. They may only contain ASCII characters; bytes with a numeric value of 128 or greater must be expressed with escapes.
The b denotes a byte string.
Bytes are the actual data. Strings are an abstraction.
If you had multi-character string object and you took a single character, it would be a string, and it might be more than 1 byte in size depending on encoding.
If took 1 byte with a byte string, you'd get a single 8-bit value from 0-255 and it might not represent a complete character if those characters due to encoding were > 1 byte.
TBH I'd use strings unless I had some specific low level reason to use bytes.
From server side, if we send any response, it will be sent in the form of byte type, so it will appear in the client as b'Response from server'
In order get rid of b'....' simply use below code:
Server file:
stri="Response from server"
c.send(stri.encode())
Client file:
print(s.recv(1024).decode())
then it will print Response from server
The answer to the question is that, it does:
data.encode()
and in order to decode it(remove the b, because sometimes you don't need it)
use:
data.decode()
Here's an example where the absence of b would throw a TypeError exception in Python 3.x
>>> f=open("new", "wb")
>>> f.write("Hello Python!")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'str' does not support the buffer interface
Adding a b prefix would fix the problem.
It turns it into a bytes literal (or str in 2.x), and is valid for 2.6+.
The r prefix causes backslashes to be "uninterpreted" (not ignored, and the difference does matter).
In addition to what others have said, note that a single character in unicode can consist of multiple bytes.
The way unicode works is that it took the old ASCII format (7-bit code that looks like 0xxx xxxx) and added multi-bytes sequences where all bytes start with 1 (1xxx xxxx) to represent characters beyond ASCII so that Unicode would be backwards-compatible with ASCII.
>>> len('Öl') # German word for 'oil' with 2 characters
2
>>> 'Öl'.encode('UTF-8') # convert str to bytes
b'\xc3\x96l'
>>> len('Öl'.encode('UTF-8')) # 3 bytes encode 2 characters !
3
You can use JSON to convert it to dictionary
import json
data = b'{"key":"value"}'
print(json.loads(data))
{"key":"value"}
FLASK:
This is an example from flask. Run this on terminal line:
import requests
requests.post(url='http://localhost(example)/',json={'key':'value'})
In flask/routes.py
#app.route('/', methods=['POST'])
def api_script_add():
print(request.data) # --> b'{"hi":"Hello"}'
print(json.loads(request.data))
return json.loads(request.data)
{'key':'value'}
b"hello" is not a string (even though it looks like one), but a byte sequence. It is a sequence of 5 numbers, which, if you mapped them to a character table, would look like h e l l o. However the value itself is not a string, Python just has a convenient syntax for defining byte sequences using text characters rather than the numbers itself. This saves you some typing, and also often byte sequences are meant to be interpreted as characters. However, this is not always the case - for example, reading a JPG file will produce a sequence of nonsense letters inside b"..." because JPGs have a non-text structure.
.encode() and .decode() convert between strings and bytes.
bytes(somestring.encode()) is the solution that worked for me in python 3.
def compare_types():
output = b'sometext'
print(output)
print(type(output))
somestring = 'sometext'
encoded_string = somestring.encode()
output = bytes(encoded_string)
print(output)
print(type(output))
compare_types()
Apparently, the following is the valid syntax:
b'The string'
I would like to know:
What does this b character in front of the string mean?
What are the effects of using it?
What are appropriate situations to use it?
I found a related question right here on SO, but that question is about PHP though, and it states the b is used to indicate the string is binary, as opposed to Unicode, which was needed for code to be compatible from version of PHP < 6, when migrating to PHP 6. I don't think this applies to Python.
I did find this documentation on the Python site about using a u character in the same syntax to specify a string as Unicode. Unfortunately, it doesn't mention the b character anywhere in that document.
Also, just out of curiosity, are there more symbols than the b and u that do other things?
Python 3.x makes a clear distinction between the types:
str = '...' literals = a sequence of Unicode characters (Latin-1, UCS-2 or UCS-4, depending on the widest character in the string)
bytes = b'...' literals = a sequence of octets (integers between 0 and 255)
If you're familiar with:
Java or C#, think of str as String and bytes as byte[];
SQL, think of str as NVARCHAR and bytes as BINARY or BLOB;
Windows registry, think of str as REG_SZ and bytes as REG_BINARY.
If you're familiar with C(++), then forget everything you've learned about char and strings, because a character is not a byte. That idea is long obsolete.
You use str when you want to represent text.
print('שלום עולם')
You use bytes when you want to represent low-level binary data like structs.
NaN = struct.unpack('>d', b'\xff\xf8\x00\x00\x00\x00\x00\x00')[0]
You can encode a str to a bytes object.
>>> '\uFEFF'.encode('UTF-8')
b'\xef\xbb\xbf'
And you can decode a bytes into a str.
>>> b'\xE2\x82\xAC'.decode('UTF-8')
'€'
But you can't freely mix the two types.
>>> b'\xEF\xBB\xBF' + 'Text with a UTF-8 BOM'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: can't concat bytes to str
The b'...' notation is somewhat confusing in that it allows the bytes 0x01-0x7F to be specified with ASCII characters instead of hex numbers.
>>> b'A' == b'\x41'
True
But I must emphasize, a character is not a byte.
>>> 'A' == b'A'
False
In Python 2.x
Pre-3.0 versions of Python lacked this kind of distinction between text and binary data. Instead, there was:
unicode = u'...' literals = sequence of Unicode characters = 3.x str
str = '...' literals = sequences of confounded bytes/characters
Usually text, encoded in some unspecified encoding.
But also used to represent binary data like struct.pack output.
In order to ease the 2.x-to-3.x transition, the b'...' literal syntax was backported to Python 2.6, in order to allow distinguishing binary strings (which should be bytes in 3.x) from text strings (which should be str in 3.x). The b prefix does nothing in 2.x, but tells the 2to3 script not to convert it to a Unicode string in 3.x.
So yes, b'...' literals in Python have the same purpose that they do in PHP.
Also, just out of curiosity, are there
more symbols than the b and u that do
other things?
The r prefix creates a raw string (e.g., r'\t' is a backslash + t instead of a tab), and triple quotes '''...''' or """...""" allow multi-line string literals.
To quote the Python 2.x documentation:
A prefix of 'b' or 'B' is ignored in
Python 2; it indicates that the
literal should become a bytes literal
in Python 3 (e.g. when code is
automatically converted with 2to3). A
'u' or 'b' prefix may be followed by
an 'r' prefix.
The Python 3 documentation states:
Bytes literals are always prefixed with 'b' or 'B'; they produce an instance of the bytes type instead of the str type. They may only contain ASCII characters; bytes with a numeric value of 128 or greater must be expressed with escapes.
The b denotes a byte string.
Bytes are the actual data. Strings are an abstraction.
If you had multi-character string object and you took a single character, it would be a string, and it might be more than 1 byte in size depending on encoding.
If took 1 byte with a byte string, you'd get a single 8-bit value from 0-255 and it might not represent a complete character if those characters due to encoding were > 1 byte.
TBH I'd use strings unless I had some specific low level reason to use bytes.
From server side, if we send any response, it will be sent in the form of byte type, so it will appear in the client as b'Response from server'
In order get rid of b'....' simply use below code:
Server file:
stri="Response from server"
c.send(stri.encode())
Client file:
print(s.recv(1024).decode())
then it will print Response from server
The answer to the question is that, it does:
data.encode()
and in order to decode it(remove the b, because sometimes you don't need it)
use:
data.decode()
Here's an example where the absence of b would throw a TypeError exception in Python 3.x
>>> f=open("new", "wb")
>>> f.write("Hello Python!")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'str' does not support the buffer interface
Adding a b prefix would fix the problem.
It turns it into a bytes literal (or str in 2.x), and is valid for 2.6+.
The r prefix causes backslashes to be "uninterpreted" (not ignored, and the difference does matter).
In addition to what others have said, note that a single character in unicode can consist of multiple bytes.
The way unicode works is that it took the old ASCII format (7-bit code that looks like 0xxx xxxx) and added multi-bytes sequences where all bytes start with 1 (1xxx xxxx) to represent characters beyond ASCII so that Unicode would be backwards-compatible with ASCII.
>>> len('Öl') # German word for 'oil' with 2 characters
2
>>> 'Öl'.encode('UTF-8') # convert str to bytes
b'\xc3\x96l'
>>> len('Öl'.encode('UTF-8')) # 3 bytes encode 2 characters !
3
You can use JSON to convert it to dictionary
import json
data = b'{"key":"value"}'
print(json.loads(data))
{"key":"value"}
FLASK:
This is an example from flask. Run this on terminal line:
import requests
requests.post(url='http://localhost(example)/',json={'key':'value'})
In flask/routes.py
#app.route('/', methods=['POST'])
def api_script_add():
print(request.data) # --> b'{"hi":"Hello"}'
print(json.loads(request.data))
return json.loads(request.data)
{'key':'value'}
b"hello" is not a string (even though it looks like one), but a byte sequence. It is a sequence of 5 numbers, which, if you mapped them to a character table, would look like h e l l o. However the value itself is not a string, Python just has a convenient syntax for defining byte sequences using text characters rather than the numbers itself. This saves you some typing, and also often byte sequences are meant to be interpreted as characters. However, this is not always the case - for example, reading a JPG file will produce a sequence of nonsense letters inside b"..." because JPGs have a non-text structure.
.encode() and .decode() convert between strings and bytes.
bytes(somestring.encode()) is the solution that worked for me in python 3.
def compare_types():
output = b'sometext'
print(output)
print(type(output))
somestring = 'sometext'
encoded_string = somestring.encode()
output = bytes(encoded_string)
print(output)
print(type(output))
compare_types()