Related
we get a string from user and want to lowercase it and remove vowels and add a '.' before each letter of it. for example we get 'aBAcAba' and change it to '.b.c.b' . two early things are done but i want some help with third one.
str = input()
str=str.lower()
for i in range(0,len(str)):
str=str.replace('a','')
str=str.replace('e','')
str=str.replace('o','')
str=str.replace('i','')
str=str.replace('u','')
print(str)
for j in range(0,len(str)):
str=str.replace(str[j],('.'+str[j]))
print(str)
A few things:
You should avoid the variable name str because this is used by a builtin, so I've changed it to st
In the first part, no loop is necessary; replace will replace all occurrences of a substring
For the last part, it is probably easiest to loop through the string and build up a new string. Limiting this answer to basic syntax, a simple for loop will work.
st = input()
st=st.lower()
st=st.replace('a','')
st=st.replace('e','')
st=st.replace('o','')
st=st.replace('i','')
st=st.replace('u','')
print(st)
st_new = ''
for c in st:
st_new += '.' + c
print(st_new)
Another potential improvement: for the second part, you can also write a loop (instead of your five separate replace lines):
for c in 'aeiou':
st = st.replace(c, '')
Other possibilities using more advanced techniques:
For the second part, a regular expression could be used:
st = re.sub('[aeiou]', '', st)
For the third part, a generator expression could be used:
st_new = ''.join(f'.{c}' for c in st)
You can use str.join() to place some character in between all the existing characters, and then you can use string concatenation to place it again at the end:
# st = 'bcb'
st = '.' + '.'.join(st)
# '.b.c.b'
As a sidenote, please don't use str as a variable name. It's the name of the "string" datatype, and if you make a variable named it then you can't properly work with other strings any more. string, st, s, etc. are fine, as they're not the reserved keyword str.
z = "aBAcAba"
z = z.lower()
newstring = ''
for i in z:
if not i in 'aeiou':
newstring+='.'
newstring+=i
print(newstring)
Here I have gone step by step, first converting the string to lowercase, then checking if the word is not vowel, then add a dot to our final string then add the word to our final string.
You could try splitting the string into an array and then build a new string with the indexes of the array appending an "."
not too efficient but will work.
thanks to all of you especially allani. the bellow code worked.
st = input()
st=st.lower()
st=st.replace('a','')
st=st.replace('e','')
st=st.replace('o','')
st=st.replace('i','')
st=st.replace('u','')
print(st)
st_new = ''
for c in st:
st_new += '.' + c
print(st_new)
This does everything.
import re
data = 'KujhKyjiubBMNBHJGJhbvgqsauijuetystareFGcvb'
matches = re.compile('[^aeiou]', re.I).finditer(data)
final = f".{'.'.join([m.group().lower() for m in matches])}"
print(final)
#.k.j.h.k.y.j.b.b.m.n.b.h.j.g.j.h.b.v.g.q.s.j.t.y.s.t.r.f.g.c.v.b
s = input()
s = s.lower()
for i in s:
for x in ['a','e','i','o','u']:
if i == x:
s = s.replace(i,'')
new_s = ''
for i in s:
new_s += '.'+ i
print(new_s)
def add_dots(n):
return ".".join(n)
print(add_dots("test"))
def remove_dots(a):
return a.replace(".", "")
print(remove_dots("t.e.s.t"))
I have a very long string of text with () and [] in it. I'm trying to remove the characters between the parentheses and brackets but I cannot figure out how.
The list is similar to this:
x = "This is a sentence. (once a day) [twice a day]"
This list isn't what I'm working with but is very similar and a lot shorter.
You can use re.sub function.
>>> import re
>>> x = "This is a sentence. (once a day) [twice a day]"
>>> re.sub("([\(\[]).*?([\)\]])", "\g<1>\g<2>", x)
'This is a sentence. () []'
If you want to remove the [] and the () you can use this code:
>>> import re
>>> x = "This is a sentence. (once a day) [twice a day]"
>>> re.sub("[\(\[].*?[\)\]]", "", x)
'This is a sentence. '
Important: This code will not work with nested symbols
Explanation
The first regex groups ( or [ into group 1 (by surrounding it with parentheses) and ) or ] into group 2, matching these groups and all characters that come in between them. After matching, the matched portion is substituted with groups 1 and 2, leaving the final string with nothing inside the brackets. The second regex is self explanatory from this -> match everything and substitute with the empty string.
-- modified from comment by Ajay Thomas
Run this script, it works even with nested brackets.
Uses basic logical tests.
def a(test_str):
ret = ''
skip1c = 0
skip2c = 0
for i in test_str:
if i == '[':
skip1c += 1
elif i == '(':
skip2c += 1
elif i == ']' and skip1c > 0:
skip1c -= 1
elif i == ')'and skip2c > 0:
skip2c -= 1
elif skip1c == 0 and skip2c == 0:
ret += i
return ret
x = "ewq[a [(b] ([c))]] This is a sentence. (once a day) [twice a day]"
x = a(x)
print x
print repr(x)
Just incase you don't run it,
Here's the output:
>>>
ewq This is a sentence.
'ewq This is a sentence. '
Here's a solution similar to #pradyunsg's answer (it works with arbitrary nested brackets):
def remove_text_inside_brackets(text, brackets="()[]"):
count = [0] * (len(brackets) // 2) # count open/close brackets
saved_chars = []
for character in text:
for i, b in enumerate(brackets):
if character == b: # found bracket
kind, is_close = divmod(i, 2)
count[kind] += (-1)**is_close # `+1`: open, `-1`: close
if count[kind] < 0: # unbalanced bracket
count[kind] = 0 # keep it
else: # found bracket to remove
break
else: # character is not a [balanced] bracket
if not any(count): # outside brackets
saved_chars.append(character)
return ''.join(saved_chars)
print(repr(remove_text_inside_brackets(
"This is a sentence. (once a day) [twice a day]")))
# -> 'This is a sentence. '
This should work for parentheses. Regular expressions will "consume" the text it has matched so it won't work for nested parentheses.
import re
regex = re.compile(".*?\((.*?)\)")
result = re.findall(regex, mystring)
or this would find one set of parentheses, simply loop to find more:
start = mystring.find("(")
end = mystring.find(")")
if start != -1 and end != -1:
result = mystring[start+1:end]
You can split, filter, and join the string again. If your brackets are well defined the following code should do.
import re
x = "".join(re.split("\(|\)|\[|\]", x)[::2])
You can try this. Can remove the bracket and the content exist inside it.
import re
x = "This is a sentence. (once a day) [twice a day]"
x = re.sub("\(.*?\)|\[.*?\]","",x)
print(x)
Expected ouput :
This is a sentence.
For anyone who appreciates the simplicity of the accepted answer by jvallver, and is looking for more readability from their code:
>>> import re
>>> x = 'This is a sentence. (once a day) [twice a day]'
>>> opening_braces = '\(\['
>>> closing_braces = '\)\]'
>>> non_greedy_wildcard = '.*?'
>>> re.sub(f'[{opening_braces}]{non_greedy_wildcard}[{closing_braces}]', '', x)
'This is a sentence. '
Most of the explanation for why this regex works is included in the code. Your future self will thank you for the 3 additional lines.
(Replace the f-string with the equivalent string concatenation for Python2 compatibility)
The RegEx \(.*?\)|\[.*?\] removes bracket content by finding pairs, first it remove paranthesis and then square brackets. I also works fine for the nested brackets as it acts in sequence. Ofcourse, it would break in case of bad brackets scenario.
_brackets = re.compile("\(.*?\)|\[.*?\]")
_spaces = re.compile("\s+")
_b = _brackets.sub(" ", "microRNAs (miR) play a role in cancer ([1], [2])")
_s = _spaces.sub(" ", _b.strip())
print(_s)
# OUTPUT: microRNAs play a role in cancer
Hi does anyone know how to make a function that replaces every alphabetic character in a string with a character from a given word (repeated indefinitely). If a character is not alphabetic it should stay where it is. Also this has to be done without importing anything.
def replace_string(string,word)
'''
>>>replace_string('my name is','abc')
'ab cabc ab'
So far i come up with:
def replace_string(string,word):
new=''
for i in string:
if i.isalpha():
new=new+word
else: new=new+i
print(new)
but, this function just prints 'abcabc abcabcabcabc abcabc' instead of 'ab cabc ab'
Change as follows:
def replace(string, word):
new, pos = '', 0
for c in string:
if c.isalpha():
new += word[pos%len(word)] # rotate through replacement string
pos += 1 # increment position in current word
else:
new += c
pos = 0 # reset position in current word
return new
>>> replace('my name is greg', 'hi')
'hi hihi hi hihi'
If you can't use the itertools module, first create a generator function that will cycle through your replacement word indefinitely:
def cycle(string):
while True:
for c in string:
yield c
Then, adjust your existing function just a little bit:
def replace_string(string,word):
new=''
repl = cycle(word)
for i in string:
if i.isalpha():
new = new + next(repl)
else:
new = new+i
return new
Output:
>>> replace_string("Hello, I'm Greg, are you ok?", "hi")
"hihih, i'h ihih, ihi hih ih?"
Another way to write this (but I think the first version is more readable and therefore better):
def replace_string(string,word):
return ''.join(next(cycle(word)) if c.isalpha() else c for c in string)
I am trying to reverse words of a string, but having difficulty, any assistance will be appreciated:
S = " what is my name"
def reversStr(S):
for x in range(len(S)):
return S[::-1]
break
What I get now is: eman ym si tahw
However, I am trying to get: tahw is ym eman (individual words reversed)
def reverseStr(s):
return ' '.join([x[::-1] for x in s.split(' ')])
orig = "what is my name"
reverse = ""
for word in orig.split():
reverse = "{} {}".format(reverse, word[::-1])
print(reverse)
Since everyone else's covered the case where the punctuation moves, I'll cover the one where you don't want the punctuation to move.
import re
def reverse_words(sentence):
return re.sub(r'[a-zA-Z]+', lambda x : x.group()[::-1], sentence)
Breaking this down.
re is python's regex module, and re.sub is the function in that module that handles substitutions. It has three required parameters.
The first is the regex you're matching by. In this case, I'm using r'\w+'. The r denotes a raw string, [a-zA-Z] matches all letters, and + means "at least one".
The second is either a string to substitute in, or a function that takes in a re.MatchObject and outputs a string. I'm using a lambda (or nameless) function that simply outputs the matched string, reversed.
The third is the string you want to do a find in a replace in.
So "What is my name?" -> "tahW si ym eman?"
Addendum:
I considered a regex of r'\w+' initially, because better unicode support (if the right flags are given), but \w also includes numbers and underscores. Matching - might also be desired behavior: the regexes would be r'[a-zA-Z-]+' (note trailing hyphen) and r'[\w-]+' but then you'd probably want to not match double-dashes (ie --) so more regex modifications might be needed.
The built-in reversed outputs a reversed object, which you have to cast back to string, so I generally prefer the [::-1] option.
inplace refers to modifying the object without creating a copy. Yes, like many of us has already pointed out that python strings are immutable. So technically we cannot reverse a python string datatype object inplace. However, if you use a mutable datatype, say bytearray for storing the string characters, you can actually reverse it inplace
#slicing creates copy; implies not-inplace reversing
def rev(x):
return x[-1::-1]
# inplace reversing, if input is bytearray datatype
def rev_inplace(x: bytearray):
i = 0; j = len(x)-1
while i<j:
t = x[i]
x[i] = x[j]
x[j] = t
i += 1; j -= 1
return x
Input:
x = bytearray(b'some string to reverse')
rev_inplace(x)
Output:
bytearray(b'esrever ot gnirts emose')
Try splitting each word in the string into a list (see: https://docs.python.org/2/library/stdtypes.html#str.split).
Example:
>>string = "This will be split up"
>>string_list = string.split(" ")
>>string_list
>>['This', 'will', 'be', 'split', 'up']
Then iterate through the list and reverse each constituent list item (i.e. word) which you have working already.
def reverse_in_place(phrase):
res = []
phrase = phrase.split(" ")
for word in phrase:
word = word[::-1]
res.append(word)
res = " ".join(res)
return res
[thread has been closed, but IMO, not well answered]
the python string.lib doesn't include an in place str.reverse() method.
So use the built in reversed() function call to accomplish the same thing.
>>> S = " what is my name"
>>> ("").join(reversed(S))
'eman ym si tahw'
There is no obvious way of reversing a string "truly" in-place with Python. However, you can do something like:
def reverse_string_inplace(string):
w = len(string)-1
p = w
while True:
q = string[p]
string = ' ' + string + q
w -= 1
if w < 0:
break
return string[(p+1)*2:]
Hope this makes sense.
In Python, strings are immutable. This means you cannot change the string once you have created it. So in-place reverse is not possible.
There are many ways to reverse the string in python, but memory allocation is required for that reversed string.
print(' '.join(word[::-1] for word in string))
s1 = input("Enter a string with multiple words:")
print(f'Original:{s1}')
print(f'Reverse is:{s1[::-1]}')
each_word_new_list = []
s1_split = s1.split()
for i in range(0,len(s1_split)):
each_word_new_list.append(s1_split[i][::-1])
print(f'New Reverse as List:{each_word_new_list}')
each_word_new_string=' '.join(each_word_new_list)
print(f'New Reverse as String:{each_word_new_string}')
If the sentence contains multiple spaces then usage of split() function will cause trouble because you won't know then how many spaces you need to rejoin after you reverse each word in the sentence. Below snippet might help:
# Sentence having multiple spaces
given_str = "I know this country runs by mafia "
tmp = ""
tmp_list = []
for i in given_str:
if i != ' ':
tmp = tmp + i
else:
if tmp == "":
tmp_list.append(i)
else:
tmp_list.append(tmp)
tmp_list.append(i)
tmp = ""
print(tmp_list)
rev_list = []
for x in tmp_list:
rev = x[::-1]
rev_list.append(rev)
print(rev_list)
print(''.join(rev_list))
output:
def rev(a):
if a == "":
return ""
else:
z = rev(a[1:]) + a[0]
return z
Reverse string --> gnirts esreveR
def rev(k):
y = rev(k).split()
for i in range(len(y)-1,-1,-1):
print y[i],
-->esreveR gnirts
I have a very long string of text with () and [] in it. I'm trying to remove the characters between the parentheses and brackets but I cannot figure out how.
The list is similar to this:
x = "This is a sentence. (once a day) [twice a day]"
This list isn't what I'm working with but is very similar and a lot shorter.
You can use re.sub function.
>>> import re
>>> x = "This is a sentence. (once a day) [twice a day]"
>>> re.sub("([\(\[]).*?([\)\]])", "\g<1>\g<2>", x)
'This is a sentence. () []'
If you want to remove the [] and the () you can use this code:
>>> import re
>>> x = "This is a sentence. (once a day) [twice a day]"
>>> re.sub("[\(\[].*?[\)\]]", "", x)
'This is a sentence. '
Important: This code will not work with nested symbols
Explanation
The first regex groups ( or [ into group 1 (by surrounding it with parentheses) and ) or ] into group 2, matching these groups and all characters that come in between them. After matching, the matched portion is substituted with groups 1 and 2, leaving the final string with nothing inside the brackets. The second regex is self explanatory from this -> match everything and substitute with the empty string.
-- modified from comment by Ajay Thomas
Run this script, it works even with nested brackets.
Uses basic logical tests.
def a(test_str):
ret = ''
skip1c = 0
skip2c = 0
for i in test_str:
if i == '[':
skip1c += 1
elif i == '(':
skip2c += 1
elif i == ']' and skip1c > 0:
skip1c -= 1
elif i == ')'and skip2c > 0:
skip2c -= 1
elif skip1c == 0 and skip2c == 0:
ret += i
return ret
x = "ewq[a [(b] ([c))]] This is a sentence. (once a day) [twice a day]"
x = a(x)
print x
print repr(x)
Just incase you don't run it,
Here's the output:
>>>
ewq This is a sentence.
'ewq This is a sentence. '
Here's a solution similar to #pradyunsg's answer (it works with arbitrary nested brackets):
def remove_text_inside_brackets(text, brackets="()[]"):
count = [0] * (len(brackets) // 2) # count open/close brackets
saved_chars = []
for character in text:
for i, b in enumerate(brackets):
if character == b: # found bracket
kind, is_close = divmod(i, 2)
count[kind] += (-1)**is_close # `+1`: open, `-1`: close
if count[kind] < 0: # unbalanced bracket
count[kind] = 0 # keep it
else: # found bracket to remove
break
else: # character is not a [balanced] bracket
if not any(count): # outside brackets
saved_chars.append(character)
return ''.join(saved_chars)
print(repr(remove_text_inside_brackets(
"This is a sentence. (once a day) [twice a day]")))
# -> 'This is a sentence. '
This should work for parentheses. Regular expressions will "consume" the text it has matched so it won't work for nested parentheses.
import re
regex = re.compile(".*?\((.*?)\)")
result = re.findall(regex, mystring)
or this would find one set of parentheses, simply loop to find more:
start = mystring.find("(")
end = mystring.find(")")
if start != -1 and end != -1:
result = mystring[start+1:end]
You can split, filter, and join the string again. If your brackets are well defined the following code should do.
import re
x = "".join(re.split("\(|\)|\[|\]", x)[::2])
You can try this. Can remove the bracket and the content exist inside it.
import re
x = "This is a sentence. (once a day) [twice a day]"
x = re.sub("\(.*?\)|\[.*?\]","",x)
print(x)
Expected ouput :
This is a sentence.
For anyone who appreciates the simplicity of the accepted answer by jvallver, and is looking for more readability from their code:
>>> import re
>>> x = 'This is a sentence. (once a day) [twice a day]'
>>> opening_braces = '\(\['
>>> closing_braces = '\)\]'
>>> non_greedy_wildcard = '.*?'
>>> re.sub(f'[{opening_braces}]{non_greedy_wildcard}[{closing_braces}]', '', x)
'This is a sentence. '
Most of the explanation for why this regex works is included in the code. Your future self will thank you for the 3 additional lines.
(Replace the f-string with the equivalent string concatenation for Python2 compatibility)
The RegEx \(.*?\)|\[.*?\] removes bracket content by finding pairs, first it remove paranthesis and then square brackets. I also works fine for the nested brackets as it acts in sequence. Ofcourse, it would break in case of bad brackets scenario.
_brackets = re.compile("\(.*?\)|\[.*?\]")
_spaces = re.compile("\s+")
_b = _brackets.sub(" ", "microRNAs (miR) play a role in cancer ([1], [2])")
_s = _spaces.sub(" ", _b.strip())
print(_s)
# OUTPUT: microRNAs play a role in cancer