Python's curve_fit calculates the best-fit parameters for a function with a single independent variable, but is there a way, using curve_fit or something else, to fit for a function with multiple independent variables? For example:
def func(x, y, a, b, c):
return log(a) + b*log(x) + c*log(y)
where x and y are the independent variable and we would like to fit for a, b, and c.
You can pass curve_fit a multi-dimensional array for the independent variables, but then your func must accept the same thing. For example, calling this array X and unpacking it to x, y for clarity:
import numpy as np
from scipy.optimize import curve_fit
def func(X, a, b, c):
x,y = X
return np.log(a) + b*np.log(x) + c*np.log(y)
# some artificially noisy data to fit
x = np.linspace(0.1,1.1,101)
y = np.linspace(1.,2., 101)
a, b, c = 10., 4., 6.
z = func((x,y), a, b, c) * 1 + np.random.random(101) / 100
# initial guesses for a,b,c:
p0 = 8., 2., 7.
print(curve_fit(func, (x,y), z, p0))
Gives the fit:
(array([ 9.99933937, 3.99710083, 6.00875164]), array([[ 1.75295644e-03, 9.34724308e-05, -2.90150983e-04],
[ 9.34724308e-05, 5.09079478e-06, -1.53939905e-05],
[ -2.90150983e-04, -1.53939905e-05, 4.84935731e-05]]))
optimizing a function with multiple input dimensions and a variable number of parameters
This example shows how to fit a polynomial with a two dimensional input (R^2 -> R) by an increasing number of coefficients. The design is very flexible so that the callable f from curve_fit is defined once for any number of non-keyword arguments.
minimal reproducible example
import numpy as np
import matplotlib.pyplot as plt
from scipy.optimize import curve_fit
def poly2d(xy, *coefficients):
x = xy[:, 0]
y = xy[:, 1]
proj = x + y
res = 0
for order, coef in enumerate(coefficients):
res += coef * proj ** order
return res
nx = 31
ny = 21
range_x = [-1.5, 1.5]
range_y = [-1, 1]
target_coefficients = (3, 0, -19, 7)
xs = np.linspace(*range_x, nx)
ys = np.linspace(*range_y, ny)
im_x, im_y = np.meshgrid(xs, ys)
xdata = np.c_[im_x.flatten(), im_y.flatten()]
im_target = poly2d(xdata, *target_coefficients).reshape(ny, nx)
fig, axs = plt.subplots(2, 3, figsize=(29.7, 21))
axs = axs.flatten()
ax = axs[0]
ax.set_title('Unknown polynomial P(x+y)\n[secret coefficients: ' + str(target_coefficients) + ']')
sm = ax.imshow(
im_target,
cmap = plt.get_cmap('coolwarm'),
origin='lower'
)
fig.colorbar(sm, ax=ax)
for order in range(5):
ydata=im_target.flatten()
popt, pcov = curve_fit(poly2d, xdata=xdata, ydata=ydata, p0=[0]*(order+1) )
im_fit = poly2d(xdata, *popt).reshape(ny, nx)
ax = axs[1+order]
title = 'Fit O({:d}):'.format(order)
for o, p in enumerate(popt):
if o%2 == 0:
title += '\n'
if o == 0:
title += ' {:=-{w}.1f} (x+y)^{:d}'.format(p, o, w=int(np.log10(max(abs(p), 1))) + 5)
else:
title += ' {:=+{w}.1f} (x+y)^{:d}'.format(p, o, w=int(np.log10(max(abs(p), 1))) + 5)
title += '\nrms: {:.1f}'.format( np.mean((im_fit-im_target)**2)**.5 )
ax.set_title(title)
sm = ax.imshow(
im_fit,
cmap = plt.get_cmap('coolwarm'),
origin='lower'
)
fig.colorbar(sm, ax=ax)
for ax in axs.flatten():
ax.set_xlabel('x')
ax.set_ylabel('y')
plt.show()
P.S. The concept of this answer is identical to my other answer here, but the code example is way more clear. At the time given, I will delete the other answer.
Fitting to an unknown numer of parameters
In this example, we try to reproduce some measured data measData.
In this example measData is generated by the function measuredData(x, a=.2, b=-2, c=-.8, d=.1). I practice, we might have measured measData in a way - so we have no idea, how it is described mathematically. Hence the fit.
We fit by a polynomial, which is described by the function polynomFit(inp, *args). As we want to try out different orders of polynomials, it is important to be flexible in the number of input parameters.
The independent variables (x and y in your case) are encoded in the 'columns'/second dimension of inp.
import numpy as np
import matplotlib
import matplotlib.pyplot as plt
from scipy.optimize import curve_fit
def measuredData(inp, a=.2, b=-2, c=-.8, d=.1):
x=inp[:,0]
y=inp[:,1]
return a+b*x+c*x**2+d*x**3 +y
def polynomFit(inp, *args):
x=inp[:,0]
y=inp[:,1]
res=0
for order in range(len(args)):
print(14,order,args[order],x)
res+=args[order] * x**order
return res +y
inpData=np.linspace(0,10,20).reshape(-1,2)
inpDataStr=['({:.1f},{:.1f})'.format(a,b) for a,b in inpData]
measData=measuredData(inpData)
fig, ax = plt.subplots()
ax.plot(np.arange(inpData.shape[0]), measData, label='measuered', marker='o', linestyle='none' )
for order in range(5):
print(27,inpData)
print(28,measData)
popt, pcov = curve_fit(polynomFit, xdata=inpData, ydata=measData, p0=[0]*(order+1) )
fitData=polynomFit(inpData,*popt)
ax.plot(np.arange(inpData.shape[0]), fitData, label='polyn. fit, order '+str(order), linestyle='--' )
ax.legend( loc='upper left', bbox_to_anchor=(1.05, 1))
print(order, popt)
ax.set_xticklabels(inpDataStr, rotation=90)
Result:
Yes. We can pass multiple variables for curve_fit. I have written a piece of code:
import numpy as np
x = np.random.randn(2,100)
w = np.array([1.5,0.5]).reshape(1,2)
esp = np.random.randn(1,100)
y = np.dot(w,x)+esp
y = y.reshape(100,)
In the above code I have generated x a 2D data set in shape of (2,100) i.e, there are two variables with 100 data points. I have fit the dependent variable y with independent variables x with some noise.
def model_func(x,w1,w2,b):
w = np.array([w1,w2]).reshape(1,2)
b = np.array([b]).reshape(1,1)
y_p = np.dot(w,x)+b
return y_p.reshape(100,)
We have defined a model function that establishes relation between y & x.
Note: The shape of output of the model function or predicted y should be (length of x,)
popt, pcov = curve_fit(model_func,x,y)
The popt is an 1D numpy array containing predicted parameters. In our case there are 3 parameters.
Yes, there is: simply give curve_fit a multi-dimensional array for xData.
Related
I have the following quadratic form f(x) = x^T A x - b^T x and i've used numpy to define my matrices A, b:
A = np.array([[4,3], [3,7]])
b = np.array([3,-7])
So we're talking about 2 dimensions here, meaning that the contour plot will have the axes x1 and x2 and I want these to span from -4 to 4.
I've tried to experiment by doing
u = np.linspace(-4,4,100)
x, y = np.meshgrid(u,u)
in order to create the 2 axis x1 and x2 but then I dont know how to define my function f(x) and if I do plt.contour(x,y,f) it won't work because the function f(x) is defined with only x as an argument.
Any ideas would be greatly appreciated. Thanks !
EDIT : I managed to "solve" the problem by doing the operations between the quadratic form , for example x^T A x, and ended up with a function of x1,x2 where these are the components of x vector. After that I did
u = np.linspace(-4,4,100)
x, y = np.meshgrid(u,u)
z = 1.5*(x**2) + 3*(y**2) - 2*x + 8*y + 2*x*y #(thats the function i ended up with)
plt.contour(x, y, z)
If Your transformation matrices A, b look like
A = np.array([[4,3], [3,7]])
b = np.array([3,-7])
and Your data look like
u = np.linspace(-4,4,100)
x, y = np.meshgrid(u,u)
x.shape
x and y will have the shapes (100,100).
You can define f(x) as
def f(x):
return np.dot(np.dot(x.T,A),x) - np.dot(b,x)
to then input anything with the shape (2, N) into the function f.
I am unfortunately not sure, which values You want to feed into it.
But one example would be: [(-4:4), (-4:4)]
plt.contour(x, y, f(x[0:2,:]))
update
If the visualization of the contour plot does not fit Your purpose, You can use other plots, e.g. 3D visualizations.
from mpl_toolkits.mplot3d import Axes3D # This import has side effects required for the kwarg projection='3d' in the call to fig.add_subplot
fig = plt.figure(figsize=(40,20))
ax = fig.add_subplot(111, projection='3d')
ax.scatter(x,y, f(x[0:2,:]))
plt.show()
If You expect other values in the z-dimension, the projection f might be off.
For other 3d plots see: https://matplotlib.org/mpl_toolkits/mplot3d/tutorial.html
you could try something like this:
import numpy as np
import matplotlib.pyplot as plt
A = np.array([[4,3], [3,7]])
n_points = 100
u = np.linspace(-4, 4, n_points)
x, y = np.meshgrid(u, u)
X = np.vstack([x.flatten(), y.flatten()])
f_x = np.dot(np.dot(X.T, A), X)
f_x = np.diag(f_x).reshape(n_points, n_points)
plt.figure()
plt.contour(x, y, f_x)
Another alternative is to compute f_x as follows.
f_x = np.zeros((n_points, n_points))
for i in range(n_points):
for j in range(n_points):
in_v = np.array([[x[i][j]], [y[i][j]]])
f_x[i][j] = np.dot(np.dot(in_v.T, A), in_v)
I have a original curve. I am developing a model curve matching closely the original curve. Everything is working fine but not matching. How to control the curvature of my model curve? Below code is based on answer here.
My code:
def curve_line(point1, point2):
a = (point2[1] - point1[1])/(np.cosh(point2[0]) - np.cosh(point1[0]))
b = point1[1] - a*np.sinh(point1[0])
x = np.linspace(point1[0], point2[0],100).tolist()
y = (a*np.cosh(x) + b).tolist()
return x,y
###### A sample of my code is given below
point1 = [10,100]
point2 = [20,50]
x,y = curve_line(point1, point2)
plt.plot(point1[0], point1[1], 'o')
plt.plot(point2[0], point2[1], 'o')
plt.plot(x,y) ## len(x)
My present output:
I tried following function as well:
y = (50*np.exp(-x/10) +2.5)
The output is:
Instead of just guessing the right parameters of your model function, you can fit a model curve to your data using curve_fit.
import numpy as np
from scipy.optimize import curve_fit
import matplotlib.pyplot as plt
x = np.array([ 1.92, 14.35, 21.50, 25.27, 27.34, 30.32, 32.31, 34.09, 34.21])
y = np.array([8.30, 8.26, 8.13, 7.49, 6.66, 4.59, 2.66, 0.60, 0.06])
def fun(x, a, b, c):
return a * np.cosh(b * x) + c
coef,_ = curve_fit(fun, x, y)
plt.plot(x, y, label='Original curve')
plt.plot(x, fun(x, *coef), label=f'Model: %5.3f cosh(%4.2f x + %4.2f)' % tuple(coef) )
plt.legend()
plt.show()
If it is important that the start and end points are closely fitted, you can pass uncertainties to curve_fit, adjusting them to lower values towards the ends, e.g. by
s = np.ones(len(x))
s[1:-1] = s[1:-1] * 3
coef,_ = curve_fit(fun, x, y, sigma=s)
Your other approach a * np.exp(b * x) + c will also work and gives -0.006 exp(0.21 x + 8.49).
In some cases you'll have to provide an educated guess for the initial values of the coefficients to curve_fit (it uses 1 as default).
Following the recommendations in this answer I have used several combination of values for beta0, and as shown here, the values from polyfit.
This example is UPDATED in order to show the effect of relative scales of values of X versus Y (X range is 0.1 to 100 times Y):
from random import random, seed
from scipy import polyfit
from scipy import odr
import numpy as np
from matplotlib import pyplot as plt
seed(1)
X = np.array([random() for i in range(1000)])
Y = np.array([i + random()**2 for i in range(1000)])
for num in range(1, 5):
plt.subplot(2, 2, num)
plt.title('X range is %.1f times Y' % (float(100 / max(X))))
X *= 10
z = np.polyfit(X, Y, 1)
plt.plot(X, Y, 'k.', alpha=0.1)
# Fit using odr
def f(B, X):
return B[0]*X + B[1]
linear = odr.Model(f)
mydata = odr.RealData(X, Y)
myodr = odr.ODR(mydata, linear, beta0=z)
myodr.set_job(fit_type=0)
myoutput = myodr.run()
a, b = myoutput.beta
sa, sb = myoutput.sd_beta
xp = np.linspace(plt.xlim()[0], plt.xlim()[1], 1000)
yp = a*xp+b
plt.plot(xp, yp, label='ODR')
yp2 = z[0]*xp+z[1]
plt.plot(xp, yp2, label='polyfit')
plt.legend()
plt.ylim(-1000, 2000)
plt.show()
It seems that no combination of beta0 helps... The only way to get polyfit and ODR fit similar is to swap X and Y, OR as shown here to increase the range of values of X with regard to Y, still not really a solution :)
=== EDIT ===
I do not want ODR to be the same as polyfit. I am showing polyfit just to emphasize that the ODR fit is wrong and it is not a problem of the data.
=== SOLUTION ===
thanks to #norok2 answer when Y range is 0.001 to 100000 times X:
from random import random, seed
from scipy import polyfit
from scipy import odr
import numpy as np
from matplotlib import pyplot as plt
seed(1)
X = np.array([random() / 1000 for i in range(1000)])
Y = np.array([i + random()**2 for i in range(1000)])
plt.figure(figsize=(12, 12))
for num in range(1, 10):
plt.subplot(3, 3, num)
plt.title('Y range is %.1f times X' % (float(100 / max(X))))
X *= 10
z = np.polyfit(X, Y, 1)
plt.plot(X, Y, 'k.', alpha=0.1)
# Fit using odr
def f(B, X):
return B[0]*X + B[1]
linear = odr.Model(f)
mydata = odr.RealData(X, Y,
sy=min(1/np.var(Y), 1/np.var(X))) # here the trick!! :)
myodr = odr.ODR(mydata, linear, beta0=z)
myodr.set_job(fit_type=0)
myoutput = myodr.run()
a, b = myoutput.beta
sa, sb = myoutput.sd_beta
xp = np.linspace(plt.xlim()[0], plt.xlim()[1], 1000)
yp = a*xp+b
plt.plot(xp, yp, label='ODR')
yp2 = z[0]*xp+z[1]
plt.plot(xp, yp2, label='polyfit')
plt.legend()
plt.ylim(-1000, 2000)
plt.show()
The key difference between polyfit() and the Orthogonal Distance Regression (ODR) fit is that polyfit works under the assumption that the error on x is negligible. If this assumption is violated, like it is in your data, you cannot expect the two methods to produce similar results.
In particular, ODR() is very sensitive to the errors you specify.
If you do not specify any error/weighting, it will assign a value of 1 for both x and y, meaning that any scale difference between x and y will affect the results (the so-called numerical conditioning).
On the contrary, polyfit(), before computing the fit, applies some sort of pre-whitening to the data (see around line 577 of its source code) for better numerical conditioning.
Therefore, if you want ODR() to match polyfit(), you could simply fine-tune the error on Y to change your numerical conditioning.
I tested that this works for any numerical conditioning between 1e-10 and 1e10 of your Y (it is / 10. or 1e-1 in your example).
mydata = odr.RealData(X, Y)
# equivalent to: odr.RealData(X, Y, sx=1, sy=1)
to:
mydata = odr.RealData(X, Y, sx=1, sy=1/np.var(Y))
(EDIT: note there was a typo on the line above)
I tested that this works for any numerical conditioning between 1e-10 and 1e10 of your Y (it is / 10. or 1e-1 in your example).
Note that this would only make sense for well-conditioned fits.
I cannot format source code in a comment, and so place it here. This code uses ODR to calculate fit statistics, note the line that has "parameter order for odr" such that I use a wrapper function for the ODR call to my "actual" function.
from scipy.optimize import curve_fit
import numpy as np
import scipy.odr
import scipy.stats
x = np.array([5.357, 5.797, 5.936, 6.161, 6.697, 6.731, 6.775, 8.442, 9.861])
y = np.array([0.376, 0.874, 1.049, 1.327, 2.054, 2.077, 2.138, 4.744, 7.104])
def f(x,b0,b1):
return b0 + (b1 * x)
def f_wrapper_for_odr(beta, x): # parameter order for odr
return f(x, *beta)
parameters, cov= curve_fit(f, x, y)
model = scipy.odr.odrpack.Model(f_wrapper_for_odr)
data = scipy.odr.odrpack.Data(x,y)
myodr = scipy.odr.odrpack.ODR(data, model, beta0=parameters, maxit=0)
myodr.set_job(fit_type=2)
parameterStatistics = myodr.run()
df_e = len(x) - len(parameters) # degrees of freedom, error
cov_beta = parameterStatistics.cov_beta # parameter covariance matrix from ODR
sd_beta = parameterStatistics.sd_beta * parameterStatistics.sd_beta
ci = []
t_df = scipy.stats.t.ppf(0.975, df_e)
ci = []
for i in range(len(parameters)):
ci.append([parameters[i] - t_df * parameterStatistics.sd_beta[i], parameters[i] + t_df * parameterStatistics.sd_beta[i]])
tstat_beta = parameters / parameterStatistics.sd_beta # coeff t-statistics
pstat_beta = (1.0 - scipy.stats.t.cdf(np.abs(tstat_beta), df_e)) * 2.0 # coef. p-values
for i in range(len(parameters)):
print('parameter:', parameters[i])
print(' conf interval:', ci[i][0], ci[i][1])
print(' tstat:', tstat_beta[i])
print(' pstat:', pstat_beta[i])
print()
I have the following function I need to solve:
np.exp((1-Y)/Y) = np.exp(c) -b*x
I defined the function as:
def function(x, b, c):
np.exp((1-Y)/Y) = np.exp(c) -b*x
return y
def function_solve(y, b, c):
x = (np.exp(c)-np.exp((1-Y)/Y))/b
return x
then I used:
x_data = [4, 6, 8, 10]
y_data = [0.86, 0.73, 0.53, 0.3]
popt, pcov = curve_fit(function, x_data, y_data,(28.14,-0.25))
answer = function_solve(0.5, popt[0], popt[1])
I tried running the code and the error was:
can't assign to function call
The function I'm trying to solve is y = 1/ c*exp(-b*x) in the linear form. I have bunch of y_data and x_data, I want to get optimal values for c and b.
There are two problems that jump at me:
ln((1-Y)/Y) = ln(c) -b*x this is not valid Python code. On the left side you must have a name, whereas here you have a function call ln(..), hence the error.
ln() is not a Python function in the standard library. There is a math.log() function. Unless you defined ln() somewhere else, it will not work.
Some problems with your code have already been pointed out. Here is a solution:
First, you need to get the correct logarithmic expression of your original function:
y = 1 / (c * exp(-b * x))
y = exp(b * x) / c
ln(y) = b * x + ln(1/c)
ln(y) = b * x - ln(c)
If you want to use that in curve_fit, you need to define your function as follows:
def f_log(x, b, c_ln):
return b * x - c_ln
I now show you the outcome for some randomly generated data (using b = 0.08 and c = 100.5) using the original function and then also the output for the data you provided:
[ 8.17260899e-02 1.17566291e+02]
As you can see the fitted values are close to the original ones and the fit describes the data very well.
For your data it looks as follows:
[-0.094 -1.263]
Here is the code:
import numpy as np
import matplotlib.pyplot as plt
from scipy.optimize import curve_fit
def f(x, b, c):
return 1. / (c * np.exp(-b * x))
def f_log(x, b, c_ln):
return b * x - c_ln
# some random data
b_org = 0.08
c_org = 100.5
x_data = np.linspace(0.01, 100., 50)
y_data = f(x_data, b_org, c_org) + np.random.normal(0, 0.5, len(x_data))
# fit the data
popt, pcov = curve_fit(f, x_data, y_data, p0=(0.1, 50))
print popt
# plot the data
xnew = np.linspace(0.01, 100., 5000)
plt.plot(x_data, y_data, 'bo')
plt.plot(xnew, f(xnew, *popt), 'r')
plt.show()
# your data
x_data = np.array([4, 6, 8, 10])
y_data = np.array([0.86, 0.73, 0.53, 0.3])
# fit the data
popt_log, pcov_log = curve_fit(f_log, x_data, y_data)
print popt_log
# plot the data
xnew = np.linspace(4, 10., 500)
plt.plot(x_data, y_data, 'bo')
plt.plot(xnew, f_log(xnew, *popt_log), 'r')
plt.show()
Your problem is in defining function():
def function(x, b, c):
ln((1-Y)/Y) = ln(c) -b*x
return y
You're trying to assign
ln(c) - b*x
to the call of another function, ln(), rather than a variable. Instead, solve the function for a variable (of the function) so it can be stored in a python variable.
So I've got some data stored as two lists, and plotted them using
plot(datasetx, datasety)
Then I set a trendline
trend = polyfit(datasetx, datasety)
trendx = []
trendy = []
for a in range(datasetx[0], (datasetx[-1]+1)):
trendx.append(a)
trendy.append(trend[0]*a**2 + trend[1]*a + trend[2])
plot(trendx, trendy)
But I have a third list of data, which is the error in the original datasety. I'm fine with plotting the errorbars, but what I don't know is using this, how to find the error in the coefficients of the polynomial trendline.
So say my trendline came out to be 5x^2 + 3x + 4 = y, there needs to be some sort of error on the 5, 3 and 4 values.
Is there a tool using NumPy that will calculate this for me?
I think you can use the function curve_fit of scipy.optimize (documentation). A basic example of the usage:
import numpy as np
from scipy.optimize import curve_fit
def func(x, a, b, c):
return a*x**2 + b*x + c
x = np.linspace(0,4,50)
y = func(x, 5, 3, 4)
yn = y + 0.2*np.random.normal(size=len(x))
popt, pcov = curve_fit(func, x, yn)
Following the documentation, pcov gives:
The estimated covariance of popt. The diagonals provide the variance
of the parameter estimate.
So in this way you can calculate an error estimate on the coefficients. To have the standard deviation you can take the square root of the variance.
Now you have an error on the coefficients, but it is only based on the deviation between the ydata and the fit. In case you also want to account for an error on the ydata itself, the curve_fit function provides the sigma argument:
sigma : None or N-length sequence
If not None, it represents the standard-deviation of ydata. This
vector, if given, will be used as weights in the least-squares
problem.
A complete example:
import numpy as np
from scipy.optimize import curve_fit
def func(x, a, b, c):
return a*x**2 + b*x + c
x = np.linspace(0,4,20)
y = func(x, 5, 3, 4)
# generate noisy ydata
yn = y + 0.2 * y * np.random.normal(size=len(x))
# generate error on ydata
y_sigma = 0.2 * y * np.random.normal(size=len(x))
popt, pcov = curve_fit(func, x, yn, sigma = y_sigma)
# plot
import matplotlib.pyplot as plt
fig = plt.figure()
ax = fig.add_subplot(111)
ax.errorbar(x, yn, yerr = y_sigma, fmt = 'o')
ax.plot(x, np.polyval(popt, x), '-')
ax.text(0.5, 100, r"a = {0:.3f} +/- {1:.3f}".format(popt[0], pcov[0,0]**0.5))
ax.text(0.5, 90, r"b = {0:.3f} +/- {1:.3f}".format(popt[1], pcov[1,1]**0.5))
ax.text(0.5, 80, r"c = {0:.3f} +/- {1:.3f}".format(popt[2], pcov[2,2]**0.5))
ax.grid()
plt.show()
Then something else, about using numpy arrays. One of the main advantages of using numpy is that you can avoid for loops because operations on arrays apply elementwise. So the for-loop in your example can also be done as following:
trendx = arange(datasetx[0], (datasetx[-1]+1))
trendy = trend[0]*trendx**2 + trend[1]*trendx + trend[2]
Where I use arange instead of range as it returns a numpy array instead of a list.
In this case you can also use the numpy function polyval:
trendy = polyval(trend, trendx)
I have not been able to find any way of getting the errors in the coefficients that is built in to numpy or python. I have a simple tool that I wrote based on Section 8.5 and 8.6 of John Taylor's An Introduction to Error Analysis. Maybe this will be sufficient for your task (note the default return is the variance, not the standard deviation). You can get large errors (as in the provided example) because of significant covariance.
def leastSquares(xMat, yMat):
'''
Purpose
-------
Perform least squares using the procedure outlined in 8.5 and 8.6 of Taylor, solving
matrix equation X a = Y
Examples
--------
>>> from scipy import matrix
>>> xMat = matrix([[ 1, 5, 25],
[ 1, 7, 49],
[ 1, 9, 81],
[ 1, 11, 121]])
>>> # matrix has rows of format [constant, x, x^2]
>>> yMat = matrix([[142],
[168],
[211],
[251]])
>>> a, varCoef, yRes = leastSquares(xMat, yMat)
>>> # a is a column matrix, holding the three coefficients a, b, c, corresponding to
>>> # the equation a + b*x + c*x^2
Returns
-------
a: matrix
best fit coefficients
varCoef: matrix
variance of derived coefficents
yRes: matrix
y-residuals of fit
'''
xMatSize = xMat.shape
numMeas = xMatSize[0]
numVars = xMatSize[1]
xxMat = xMat.T * xMat
xyMat = xMat.T * yMat
xxMatI = xxMat.I
aMat = xxMatI * xyMat
yAvgMat = xMat * aMat
yRes = yMat - yAvgMat
var = (yRes.T * yRes) / (numMeas - numVars)
varCoef = xxMatI.diagonal() * var[0, 0]
return aMat, varCoef, yRes