I am probably making a stupid mistake, but I can't find where it is. I want to count the number of lines in my csv file. I wrote this, and obviously isn't working: I have row_count = 0 while it should be 400. Cheers.
f = open(adresse,"r")
reader = csv.reader(f,delimiter = ",")
data = [l for l in reader]
row_count = sum(1 for row in reader)
print row_count
with open(adresse,"r") as f:
reader = csv.reader(f,delimiter = ",")
data = list(reader)
row_count = len(data)
You are trying to read the file twice, when the file pointer has already reached the end of file after saving the data list.
First you have to open the file with open
input_file = open("nameOfFile.csv","r+")
Then use the csv.reader for open the csv
reader_file = csv.reader(input_file)
At the last, you can take the number of row with the instruction 'len'
value = len(list(reader_file))
The total code is this:
input_file = open("nameOfFile.csv","r+")
reader_file = csv.reader(input_file)
value = len(list(reader_file))
Remember that if you want to reuse the csv file, you have to make a input_file.fseek(0), because when you use a list for the reader_file, it reads all file, and the pointer in the file change its position
If you are working with python3 and have pandas library installed you can go with
import pandas as pd
results = pd.read_csv('f.csv')
print(len(results))
I would consider using a generator. It would do the job and keeps you safe from MemoryError of any kind
def generator_count_file_rows(input_file):
for row in open(input_file,'r'):
yield row
And then
for row in generator_count_file_rows('very_large_set.csv'):
count+=1
The important stuff is hidden in comments section of solution which is marked correct.
Re-sharing Erdős-Bacon's solution here for better visibility.
Why ?
Because: It saves lot of memory without having to create list.
So I think it is better do this way
def read_raw_csv(file_name):
with open(file_name, 'r') as file:
csvreader = csv.reader(file)
# count number of rows
entry_count = sum(1 for row in csvreader)
print(entry_count-1) # -1 is for discarding header row.
Checkout this link for more info
# with built in libraries
opened_file = open('f.csv')
from csv import reader
read_file = reader(opened_file)
apps_data = list(read_file)
rowcount = len(apps_data) #which incudes header row
print("Total rows incuding header: " + str(rowcount))
Simply Open the csv file in Notepad++. It shows the total row count in a jiffy. :)
Or
in cmd prompt , Provide file path and key in the command
find \c \v "some meaningless string" Filename.csv
Related
I am asking Python to print the minimum number from a column of CSV data, but the top row is the column number, and I don't want Python to take the top row into account. How can I make sure Python ignores the first line?
This is the code so far:
import csv
with open('all16.csv', 'rb') as inf:
incsv = csv.reader(inf)
column = 1
datatype = float
data = (datatype(column) for row in incsv)
least_value = min(data)
print least_value
Could you also explain what you are doing, not just give the code? I am very very new to Python and would like to make sure I understand everything.
You could use an instance of the csv module's Sniffer class to deduce the format of a CSV file and detect whether a header row is present along with the built-in next() function to skip over the first row only when necessary:
import csv
with open('all16.csv', 'r', newline='') as file:
has_header = csv.Sniffer().has_header(file.read(1024))
file.seek(0) # Rewind.
reader = csv.reader(file)
if has_header:
next(reader) # Skip header row.
column = 1
datatype = float
data = (datatype(row[column]) for row in reader)
least_value = min(data)
print(least_value)
Since datatype and column are hardcoded in your example, it would be slightly faster to process the row like this:
data = (float(row[1]) for row in reader)
Note: the code above is for Python 3.x. For Python 2.x use the following line to open the file instead of what is shown:
with open('all16.csv', 'rb') as file:
To skip the first line just call:
next(inf)
Files in Python are iterators over lines.
Borrowed from python cookbook,
A more concise template code might look like this:
import csv
with open('stocks.csv') as f:
f_csv = csv.reader(f)
headers = next(f_csv)
for row in f_csv:
# Process row ...
In a similar use case I had to skip annoying lines before the line with my actual column names. This solution worked nicely. Read the file first, then pass the list to csv.DictReader.
with open('all16.csv') as tmp:
# Skip first line (if any)
next(tmp, None)
# {line_num: row}
data = dict(enumerate(csv.DictReader(tmp)))
You would normally use next(incsv) which advances the iterator one row, so you skip the header. The other (say you wanted to skip 30 rows) would be:
from itertools import islice
for row in islice(incsv, 30, None):
# process
use csv.DictReader instead of csv.Reader.
If the fieldnames parameter is omitted, the values in the first row of the csvfile will be used as field names. you would then be able to access field values using row["1"] etc
Python 2.x
csvreader.next()
Return the next row of the reader’s iterable object as a list, parsed
according to the current dialect.
csv_data = csv.reader(open('sample.csv'))
csv_data.next() # skip first row
for row in csv_data:
print(row) # should print second row
Python 3.x
csvreader.__next__()
Return the next row of the reader’s iterable object as a list (if the
object was returned from reader()) or a dict (if it is a DictReader
instance), parsed according to the current dialect. Usually you should
call this as next(reader).
csv_data = csv.reader(open('sample.csv'))
csv_data.__next__() # skip first row
for row in csv_data:
print(row) # should print second row
The documentation for the Python 3 CSV module provides this example:
with open('example.csv', newline='') as csvfile:
dialect = csv.Sniffer().sniff(csvfile.read(1024))
csvfile.seek(0)
reader = csv.reader(csvfile, dialect)
# ... process CSV file contents here ...
The Sniffer will try to auto-detect many things about the CSV file. You need to explicitly call its has_header() method to determine whether the file has a header line. If it does, then skip the first row when iterating the CSV rows. You can do it like this:
if sniffer.has_header():
for header_row in reader:
break
for data_row in reader:
# do something with the row
this might be a very old question but with pandas we have a very easy solution
import pandas as pd
data=pd.read_csv('all16.csv',skiprows=1)
data['column'].min()
with skiprows=1 we can skip the first row then we can find the least value using data['column'].min()
The new 'pandas' package might be more relevant than 'csv'. The code below will read a CSV file, by default interpreting the first line as the column header and find the minimum across columns.
import pandas as pd
data = pd.read_csv('all16.csv')
data.min()
Because this is related to something I was doing, I'll share here.
What if we're not sure if there's a header and you also don't feel like importing sniffer and other things?
If your task is basic, such as printing or appending to a list or array, you could just use an if statement:
# Let's say there's 4 columns
with open('file.csv') as csvfile:
csvreader = csv.reader(csvfile)
# read first line
first_line = next(csvreader)
# My headers were just text. You can use any suitable conditional here
if len(first_line) == 4:
array.append(first_line)
# Now we'll just iterate over everything else as usual:
for row in csvreader:
array.append(row)
Well, my mini wrapper library would do the job as well.
>>> import pyexcel as pe
>>> data = pe.load('all16.csv', name_columns_by_row=0)
>>> min(data.column[1])
Meanwhile, if you know what header column index one is, for example "Column 1", you can do this instead:
>>> min(data.column["Column 1"])
For me the easiest way to go is to use range.
import csv
with open('files/filename.csv') as I:
reader = csv.reader(I)
fulllist = list(reader)
# Starting with data skipping header
for item in range(1, len(fulllist)):
# Print each row using "item" as the index value
print (fulllist[item])
I would convert csvreader to list, then pop the first element
import csv
with open(fileName, 'r') as csvfile:
csvreader = csv.reader(csvfile)
data = list(csvreader) # Convert to list
data.pop(0) # Removes the first row
for row in data:
print(row)
I would use tail to get rid of the unwanted first line:
tail -n +2 $INFIL | whatever_script.py
just add [1:]
example below:
data = pd.read_csv("/Users/xyz/Desktop/xyxData/xyz.csv", sep=',', header=None)**[1:]**
that works for me in iPython
Python 3.X
Handles UTF8 BOM + HEADER
It was quite frustrating that the csv module could not easily get the header, there is also a bug with the UTF-8 BOM (first char in file).
This works for me using only the csv module:
import csv
def read_csv(self, csv_path, delimiter):
with open(csv_path, newline='', encoding='utf-8') as f:
# https://bugs.python.org/issue7185
# Remove UTF8 BOM.
txt = f.read()[1:]
# Remove header line.
header = txt.splitlines()[:1]
lines = txt.splitlines()[1:]
# Convert to list.
csv_rows = list(csv.reader(lines, delimiter=delimiter))
for row in csv_rows:
value = row[INDEX_HERE]
Simple Solution is to use csv.DictReader()
import csv
def read_csv(file): with open(file, 'r') as file:
reader = csv.DictReader(file)
for row in reader:
print(row["column_name"]) # Replace the name of column header.
I have a CSV file that is being constantly appended. It has multiple headers and the only common thing among the headers is that the first column is always "NAME".
How do I split the single CSV file into separate CSV files, one for each header row?
here is a sample file:
"NAME","AGE","SEX","WEIGHT","CITY"
"Bob",20,"M",120,"New York"
"Peter",33,"M",220,"Toronto"
"Mary",43,"F",130,"Miami"
"NAME","COUNTRY","SPORT","NUMBER","SPORT","NUMBER"
"Larry","USA","Football",14,"Baseball",22
"Jenny","UK","Rugby",5,"Field Hockey",11
"Jacques","Canada","Hockey",19,"Volleyball",4
"NAME","DRINK","QTY"
"Jesse","Beer",6
"Wendel","Juice",1
"Angela","Milk",3
If the size of the csv files is not huge -- so all can be in memory at once -- just use read() to read the file into a string and then use a regex on this string:
import re
with open(ur_csv) as f:
data=f.read()
chunks=re.finditer(r'(^"NAME".*?)(?=^"NAME"|\Z)',data,re.S | re.M)
for i, chunk in enumerate(chunks, 1):
with open('/path/{}.csv'.format(i), 'w') as fout:
fout.write(chunk.group(1))
If the size of the file is a concern, you can use mmap to create something that looks like a big string but is not all in memory at the same time.
Then use the mmap string with a regex to separate the csv chunks like so:
import mmap
import re
with open(ur_csv) as f:
mf=mmap.mmap(f.fileno(), 0, access=mmap.ACCESS_READ)
chunks=re.finditer(r'(^"NAME".*?)(?=^"NAME"|\Z)',mf,re.S | re.M)
for i, chunk in enumerate(chunks, 1):
with open('/path/{}.csv'.format(i), 'w') as fout:
fout.write(chunk.group(1))
In either case, this will write all the chunks in files named 1.csv, 2.csv etc.
Copy the input to a new output file each time you see a header line. Something like this (not checked for errors):
partNum = 1
outHandle = None
for line in open("yourfile.csv","r").readlines():
if line.startswith('"NAME"'):
if outHandle is not None:
outHandle.close()
outHandle = open("part%d.csv" % (partNum,), "w")
partNum += 1
outHandle.write(line)
outHandle.close()
The above will break if the input does not begin with a header line or if the input is empty.
You can use the python csv package to read your source file and write multile csv files based on the rule that if element 0 in your row == "NAME", spawn off a new file. Something like this...
import csv
outfile_name = "out_%.csv"
out_num = 1
with open('nameslist.csv', 'rb') as csvfile:
csvreader = csv.reader(csvfile, delimiter=',')
csv_buffer = []
for row in csvreader:
if row[0] != "NAME":
csv_buffer.append(row)
else:
with open(outfile_name % out_num, 'wb') as csvout:
for b_row in csv_buffer:
csvout.writerow(b_row)
out_num += 1
csv_buffer = [row]
P.S. I haven't actually tested this but that's the general concept
Given the other answers, the only modification that I would suggest would be to open using csv.DictReader. pseudo code would be like this. Assuming that the first line in the file is the first header
Note that this assumes that there is no blank line or other indicator between the entries so that a 'NAME' header occurs right after data. If there were a blank line between appended files the you could use that as an indicator to use infile.fieldnames() on the next row. If you need to handle the inputs as a list, then the previous answers are better.
ifile = open(filename, 'rb')
infile = cvs.Dictreader(ifile)
infields = infile.fieldnames
filenum = 1
ofile = open('outfile'+str(filenum), 'wb')
outfields = infields # This allows you to change the header field
outfile = csv.DictWriter(ofile, fieldnames=outfields, extrasaction='ignore')
outfile.writerow(dict((fn, fn) for fn in outfields))
for row in infile:
if row['NAME'] != 'NAME':
#process this row here and do whatever is needed
else:
close(ofile)
# build infields again from this row
infields = [row["NAME"], ...] # This assumes you know the names & order
# Dict cannot be pulled as a list and keep the order that you want.
filenum += 1
ofile = open('outfile'+str(filenum), 'wb')
outfields = infields # This allows you to change the header field
outfile = csv.DictWriter(ofile, fieldnames=outfields, extrasaction='ignore')
outfile.writerow(dict((fn, fn) for fn in outfields))
# This is the end of the loop. All data has been read and processed
close(ofile)
close(ifile)
If the exact order of the new header does not matter except for the name in the first entry, then you can transfer the new list as follows:
infileds = [row['NAME']
for k in row.keys():
if k != 'NAME':
infields.append(row[k])
This will create the new header with NAME in entry 0 but the others will not be in any particular order.
I am asking Python to print the minimum number from a column of CSV data, but the top row is the column number, and I don't want Python to take the top row into account. How can I make sure Python ignores the first line?
This is the code so far:
import csv
with open('all16.csv', 'rb') as inf:
incsv = csv.reader(inf)
column = 1
datatype = float
data = (datatype(column) for row in incsv)
least_value = min(data)
print least_value
Could you also explain what you are doing, not just give the code? I am very very new to Python and would like to make sure I understand everything.
You could use an instance of the csv module's Sniffer class to deduce the format of a CSV file and detect whether a header row is present along with the built-in next() function to skip over the first row only when necessary:
import csv
with open('all16.csv', 'r', newline='') as file:
has_header = csv.Sniffer().has_header(file.read(1024))
file.seek(0) # Rewind.
reader = csv.reader(file)
if has_header:
next(reader) # Skip header row.
column = 1
datatype = float
data = (datatype(row[column]) for row in reader)
least_value = min(data)
print(least_value)
Since datatype and column are hardcoded in your example, it would be slightly faster to process the row like this:
data = (float(row[1]) for row in reader)
Note: the code above is for Python 3.x. For Python 2.x use the following line to open the file instead of what is shown:
with open('all16.csv', 'rb') as file:
To skip the first line just call:
next(inf)
Files in Python are iterators over lines.
Borrowed from python cookbook,
A more concise template code might look like this:
import csv
with open('stocks.csv') as f:
f_csv = csv.reader(f)
headers = next(f_csv)
for row in f_csv:
# Process row ...
In a similar use case I had to skip annoying lines before the line with my actual column names. This solution worked nicely. Read the file first, then pass the list to csv.DictReader.
with open('all16.csv') as tmp:
# Skip first line (if any)
next(tmp, None)
# {line_num: row}
data = dict(enumerate(csv.DictReader(tmp)))
You would normally use next(incsv) which advances the iterator one row, so you skip the header. The other (say you wanted to skip 30 rows) would be:
from itertools import islice
for row in islice(incsv, 30, None):
# process
use csv.DictReader instead of csv.Reader.
If the fieldnames parameter is omitted, the values in the first row of the csvfile will be used as field names. you would then be able to access field values using row["1"] etc
Python 2.x
csvreader.next()
Return the next row of the reader’s iterable object as a list, parsed
according to the current dialect.
csv_data = csv.reader(open('sample.csv'))
csv_data.next() # skip first row
for row in csv_data:
print(row) # should print second row
Python 3.x
csvreader.__next__()
Return the next row of the reader’s iterable object as a list (if the
object was returned from reader()) or a dict (if it is a DictReader
instance), parsed according to the current dialect. Usually you should
call this as next(reader).
csv_data = csv.reader(open('sample.csv'))
csv_data.__next__() # skip first row
for row in csv_data:
print(row) # should print second row
The documentation for the Python 3 CSV module provides this example:
with open('example.csv', newline='') as csvfile:
dialect = csv.Sniffer().sniff(csvfile.read(1024))
csvfile.seek(0)
reader = csv.reader(csvfile, dialect)
# ... process CSV file contents here ...
The Sniffer will try to auto-detect many things about the CSV file. You need to explicitly call its has_header() method to determine whether the file has a header line. If it does, then skip the first row when iterating the CSV rows. You can do it like this:
if sniffer.has_header():
for header_row in reader:
break
for data_row in reader:
# do something with the row
this might be a very old question but with pandas we have a very easy solution
import pandas as pd
data=pd.read_csv('all16.csv',skiprows=1)
data['column'].min()
with skiprows=1 we can skip the first row then we can find the least value using data['column'].min()
The new 'pandas' package might be more relevant than 'csv'. The code below will read a CSV file, by default interpreting the first line as the column header and find the minimum across columns.
import pandas as pd
data = pd.read_csv('all16.csv')
data.min()
Because this is related to something I was doing, I'll share here.
What if we're not sure if there's a header and you also don't feel like importing sniffer and other things?
If your task is basic, such as printing or appending to a list or array, you could just use an if statement:
# Let's say there's 4 columns
with open('file.csv') as csvfile:
csvreader = csv.reader(csvfile)
# read first line
first_line = next(csvreader)
# My headers were just text. You can use any suitable conditional here
if len(first_line) == 4:
array.append(first_line)
# Now we'll just iterate over everything else as usual:
for row in csvreader:
array.append(row)
Well, my mini wrapper library would do the job as well.
>>> import pyexcel as pe
>>> data = pe.load('all16.csv', name_columns_by_row=0)
>>> min(data.column[1])
Meanwhile, if you know what header column index one is, for example "Column 1", you can do this instead:
>>> min(data.column["Column 1"])
For me the easiest way to go is to use range.
import csv
with open('files/filename.csv') as I:
reader = csv.reader(I)
fulllist = list(reader)
# Starting with data skipping header
for item in range(1, len(fulllist)):
# Print each row using "item" as the index value
print (fulllist[item])
I would convert csvreader to list, then pop the first element
import csv
with open(fileName, 'r') as csvfile:
csvreader = csv.reader(csvfile)
data = list(csvreader) # Convert to list
data.pop(0) # Removes the first row
for row in data:
print(row)
I would use tail to get rid of the unwanted first line:
tail -n +2 $INFIL | whatever_script.py
just add [1:]
example below:
data = pd.read_csv("/Users/xyz/Desktop/xyxData/xyz.csv", sep=',', header=None)**[1:]**
that works for me in iPython
Python 3.X
Handles UTF8 BOM + HEADER
It was quite frustrating that the csv module could not easily get the header, there is also a bug with the UTF-8 BOM (first char in file).
This works for me using only the csv module:
import csv
def read_csv(self, csv_path, delimiter):
with open(csv_path, newline='', encoding='utf-8') as f:
# https://bugs.python.org/issue7185
# Remove UTF8 BOM.
txt = f.read()[1:]
# Remove header line.
header = txt.splitlines()[:1]
lines = txt.splitlines()[1:]
# Convert to list.
csv_rows = list(csv.reader(lines, delimiter=delimiter))
for row in csv_rows:
value = row[INDEX_HERE]
Simple Solution is to use csv.DictReader()
import csv
def read_csv(file): with open(file, 'r') as file:
reader = csv.DictReader(file)
for row in reader:
print(row["column_name"]) # Replace the name of column header.
I have no knowledge of python.
What i want to be able to do is create a script that will edit a CSV file so that it will wrap every field in column 3 around quotes. I haven't been able to find much help, is this quick and easy to do? Thanks.
column1,column2,column3
1111111,2222222,333333
This is a fairly crude solution, very specific to your request (assuming your source file is called "csvfile.csv" and is in C:\Temp).
import csv
newrow = []
csvFileRead = open('c:/temp/csvfile.csv', 'rb')
csvFileNew = open('c:/temp/csvfilenew.csv', 'wb')
# Open the CSV
csvReader = csv.reader(csvFileRead, delimiter = ',')
# Append the rows to variable newrow
for row in csvReader:
newrow.append(row)
# Add quotes around the third list item
for row in newrow:
row[2] = "'"+str(row[2])+"'"
csvFileRead.close()
# Create a new CSV file
csvWriter = csv.writer(csvFileNew, delimiter = ',')
# Append the csv with rows from newrow variable
for row in newrow:
csvWriter.writerow(row)
csvFileNew.close()
There are MUCH more elegant ways of doing what you want, but I've tried to break it down into basic chunks to show how each bit works.
I would start by looking at the csv module.
import csv
filename = 'file.csv'
with open(filename, 'wb') as f:
reader = csv.reader(f)
for row in reader:
row[2] = "'%s'" % row[2]
And then write it back in the csv file.
I need a way to get a specific item(field) of a CSV. Say I have a CSV with 100 rows and 2 columns (comma seperated). First column emails, second column passwords. For example I want to get the password of the email in row 38. So I need only the item from 2nd column row 38...
Say I have a csv file:
aaaaa#aaa.com,bbbbb
ccccc#ccc.com,ddddd
How can I get only 'ddddd' for example?
I'm new to the language and tried some stuff with the csv module, but I don't get it...
import csv
mycsv = csv.reader(open(myfilepath))
for row in mycsv:
text = row[1]
Following the comments to the SO question here, a best, more robust code would be:
import csv
with open(myfilepath, 'rb') as f:
mycsv = csv.reader(f)
for row in mycsv:
text = row[1]
............
Update: If what the OP actually wants is the last string in the last row of the csv file, there are several aproaches that not necesarily needs csv. For example,
fulltxt = open(mifilepath, 'rb').read()
laststring = fulltxt.split(',')[-1]
This is not good for very big files because you load the complete text in memory but could be ok for small files. Note that laststring could include a newline character so strip it before use.
And finally if what the OP wants is the second string in line n (for n=2):
Update 2: This is now the same code than the one in the answer from J.F.Sebastian. (The credit is for him):
import csv
line_number = 2
with open(myfilepath, 'rb') as f:
mycsv = csv.reader(f)
mycsv = list(mycsv)
text = mycsv[line_number][1]
............
#!/usr/bin/env python
"""Print a field specified by row, column numbers from given csv file.
USAGE:
%prog csv_filename row_number column_number
"""
import csv
import sys
filename = sys.argv[1]
row_number, column_number = [int(arg, 10)-1 for arg in sys.argv[2:])]
with open(filename, 'rb') as f:
rows = list(csv.reader(f))
print rows[row_number][column_number]
Example
$ python print-csv-field.py input.csv 2 2
ddddd
Note: list(csv.reader(f)) loads the whole file in memory. To avoid that you could use itertools:
import itertools
# ...
with open(filename, 'rb') as f:
row = next(itertools.islice(csv.reader(f), row_number, row_number+1))
print row[column_number]
import csv
def read_cell(x, y):
with open('file.csv', 'r') as f:
reader = csv.reader(f)
y_count = 0
for n in reader:
if y_count == y:
cell = n[x]
return cell
y_count += 1
print (read_cell(4, 8))
This example prints cell 4, 8 in Python 3.
There is an interesting point you need to catch about csv.reader() object. The csv.reader object is not list type, and not subscriptable.
This works:
for r in csv.reader(file_obj): # file not closed
print r
This does not:
r = csv.reader(file_obj)
print r[0]
So, you first have to convert to list type in order to make the above code work.
r = list( csv.reader(file_obj) )
print r[0]
Finaly I got it!!!
import csv
def select_index(index):
csv_file = open('oscar_age_female.csv', 'r')
csv_reader = csv.DictReader(csv_file)
for line in csv_reader:
l = line['Index']
if l == index:
print(line[' "Name"'])
select_index('11')
"Bette Davis"
Following may be be what you are looking for:
import pandas as pd
df = pd.read_csv("table.csv")
print(df["Password"][row_number])
#where row_number is 38 maybe
import csv
inf = csv.reader(open('yourfile.csv','r'))
for row in inf:
print row[1]