I have a data composed by three 1d-arrays (X,Y,Z) and I want to create a graph like the origin contour profile (https://www.originlab.com/doc/Origin-Help/Contour-Profile), where I have a 3d data plotted in a 2d contour, where the z value is represented by the graphic colors, and two other graphs representing profiles (or slices) of my surface for specific x and y-values. My problem is how to create the profiles.
I started by creating new x and y arrays and a grid surface for z by interpolating the data I had with scipy.interpolate.griddata
and now I can create the contour plot but I don't know how to create the profiles in xz and yz planes. I found out how to this in a 3d plot by using zdir=x and zdir=y (https://matplotlib.org/3.3.1/gallery/mplot3d/contour3d_3.html) but this works only for 3d graphs. I also know that I can trace the profile in the 'xy' plane for a specific z-value with ax.contour(x, y, z, [zvalue]). I want to do something similar to the 'xz' and 'yz' planes.
The code I have is this:
import pandas as pd
import numpy as np
import matplotlib.pyplot as plt
from matplotlib import cm
from scipy.interpolate import griddata
# reading the data
path = 'data/2019_12_11_15h17m29s_TZO_1Nd_3Hz_ref_900nm_900mW.txt_output.dat'
df = pd.read_csv(path)
X = df.position
Y = df.time
Z = df.signal
# interpolating data to create a surface
xi = np.linspace(X.min(), X.max(), 100)
yi = np.linspace(Y.min(), Y.max(), 100)
zi = griddata((X, Y), Z, (xi[None,:], yi[:,None]), method='linear')
zi = np.nan_to_num(zi)
# if I want to plot a 2D contour plot
fig = plt.figure()
ax = plt.axes()
ax.contourf(xi, yi, zi, levels=300, cmap="RdBu_r")
plt.show()
# if I want to plot a 3d surface with profiles
xi2, yi2 = np.meshgrid(xi, yi)
fig = plt.figure()
ax = fig.gca(projection='3d')
ax.plot_surface(xi2, yi2, zi, rstride=3, cstride=3, alpha=0.5)
cset = ax.contour(xi2, yi2, zi, zdir='x', offset=X.min()-30, cmap=cm.coolwarm, levels=10)
cset = ax.contour(xi2, yi2, zi, zdir='y', offset=Y.max()+30, cmap=cm.coolwarm, levels=10)
ax.set_xlim(X.min()-30, X.max()+30)
ax.set_ylim(Y.min()-30, Y.max()+30)
ax.set_zlim(Z.min(), Z.max())
plt.show()
# if I want to make a profile in xy plane:
fig = plt.figure()
ax = plt.axes()
ax.contour(xi, yi, zi, [1])
plt.show()
but I don't know how to create the profiles in 'xz' and 'yz' planes
I found myself a way of doing it that is not exactly what I was looking for but works perfectly. The idea is to fix a column/row of zi and plot against xi/yi to do a profile of the xz/yz plane. Varying the column/row in a for loop I got a result similar to levels of contour plot:
for i in range(0,len(zi),step):
z_xz = zi[i,:]
plt.plot(xi,z_xz)
and
for i in range(0,len(zi[0]),step):
z_xz = zi[:,i]
plt.plot(yi,z_xz)
please, let me know if you find a better solution
I'm working on a 3D plot displayed by a wireframe, where 2D plots are projected on the x, y, and z surface, respectively. Below you can find a minimum example.
I have 2 questions:
With contourf, the 2D plots for every x=10, x=20,... or y=10, y=20,... are displayed on the plot walls. Is there a possibility to define for which x or y, respectively, the contour plots are displayed? For example, in case I only want to have the xz contour plot for y = 0.5 mirrored on the wall?
ADDITION: To display what I mean with "2D plots", I changed "contourf" in the code to "contour" and added the resulting plot to this question. Here you can see now the xz lines for different y values, all offset to y=90. What if I do not want to have all the lines, but only two of them for defined y values?
3D_plot_with_2D_contours
As you can see in the minimum example, the 2D contour plot optically covers the wireframe 3D plot. With increasing the transparency with alpha=0.5 I can increase the transparency of the 2D contours to at least see the wireframe, but it is still optically wrong. Is it possible to sort the objects correctly?
import matplotlib.pyplot as plt,numpy as np
import pylab as pl
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt,numpy as np
plt.clf()
fig = plt.figure(1,figsize=(35,17),dpi=600,facecolor='w',edgecolor='k')
fig.set_size_inches(10.5,8)
ax = fig.gca(projection='3d')
X, Y, Z = axes3d.get_test_data(0.05)
Xnew = X + 50
Ynew = Y + 50
cset = ax.contourf(Xnew, Ynew, Z, zdir='z', offset=-100, cmap=plt.cm.coolwarm, alpha=0.5)
cset = ax.contourf(Xnew, Ynew, Z, zdir='x', offset=10, cmap=plt.cm.coolwarm, alpha=0.5)
cset = ax.contourf(Xnew, Ynew, Z, zdir='y', offset=90, cmap=plt.cm.coolwarm, alpha = 0.5)
ax.plot_wireframe(Xnew, Ynew, Z, rstride=5, cstride=5, color='black')
Z=Z-Z.min()
Z=Z/Z.max()
from scipy.ndimage.interpolation import zoom
Xall=zoom(Xnew,5)
Yall=zoom(Ynew,5)
Z=zoom(Z,5)
ax.set_xlim(10, 90)
ax.set_ylim(10, 90)
ax.set_zlim(-100, 100)
ax.tick_params(axis='z', which='major', pad=10)
ax.set_xlabel('X',labelpad=10)
ax.set_ylabel('Y',labelpad=10)
ax.set_zlabel('Z',labelpad=17)
ax.view_init(elev=35., azim=-70)
fig.tight_layout()
plt.show()
ADDITION 2: Here is the actual code I'm working with. However, the original data are hidden in the csv files which are too big to be included in the minimal example. That's why was initially replacing them by the test data. However, maybe the actual code helps nevertheless.
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt,numpy as np
import pylab as pl
from matplotlib.markers import MarkerStyle
import csv
with open("X.csv", 'r') as f:
X = list(csv.reader(f, delimiter=";"))
import numpy as np
X = np.array(X[1:], dtype=np.float)
import csv
with open("Z.csv", 'r') as f:
Z = list(csv.reader(f, delimiter=";"))
import numpy as np
Z = np.array(Z[1:], dtype=np.float)
Y = [[7,7.1,7.2,7.3,7.4,7.5,7.6,7.7,7.8,7.9,8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,9]]
Xall = np.repeat(X[:],21,axis=1)
Yall = np.repeat(Y[:],30,axis=0)
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt,numpy as np
plt.clf()
fig = plt.figure(1,figsize=(35,17),dpi=600,facecolor='w',edgecolor='k')
fig.set_size_inches(10.5,8)
ax = fig.gca(projection='3d')
cset = ax.contourf(Xall, Yall, Z, 2, zdir='x', offset=0, cmap=plt.cm.coolwarm, shade = False, edgecolor='none', alpha=0.5)
cset = ax.contourf(Xall, Yall, Z, 2, zdir='y', offset=9, cmap=plt.cm.coolwarm, shade = False, edgecolor='none', alpha=0.5)
ax.plot_wireframe(Xall, Yall, Z, rstride=1, cstride=1, color='black')
Z=Z-Z.min()
Z=Z/Z.max()
from scipy.ndimage.interpolation import zoom
Xall=zoom(Xall,5)
Yall=zoom(Yall,5)
Z=zoom(Z,5)
cset = ax.plot_surface(Xall, Yall, np.zeros_like(Z)-0,facecolors=plt.cm.coolwarm(Z),shade=False,alpha=0.5,linewidth=False)
ax.set_xlim(-0.5, 31)
ax.set_ylim(6.9, 9.1)
ax.set_zlim(0, 500)
labelsx = [item.get_text() for item in ax.get_xticklabels()]
empty_string_labelsx = ['']*len(labelsx)
ax.set_xticklabels(empty_string_labelsx)
labelsy = [item.get_text() for item in ax.get_yticklabels()]
empty_string_labelsy = ['']*len(labelsy)
ax.set_yticklabels(empty_string_labelsy)
labelsz = [item.get_text() for item in ax.get_zticklabels()]
empty_string_labelsz = ['']*len(labelsz)
ax.set_zticklabels(empty_string_labelsz)
import matplotlib.ticker as ticker
ax.xaxis.set_major_locator(ticker.MultipleLocator(5))
ax.xaxis.set_minor_locator(ticker.MultipleLocator(1))
ax.yaxis.set_major_locator(ticker.MultipleLocator(0.5))
ax.yaxis.set_minor_locator(ticker.MultipleLocator(0.25))
ax.zaxis.set_major_locator(ticker.MultipleLocator(100))
ax.zaxis.set_minor_locator(ticker.MultipleLocator(50))
ax.tick_params(axis='z', which='major', pad=10)
ax.set_xlabel('X',labelpad=5,fontsize=15)
ax.set_ylabel('Y',labelpad=5,fontsize=15)
ax.set_zlabel('Z',labelpad=5,fontsize=15)
ax.view_init(elev=35., azim=-70)
fig.tight_layout()
plt.show()
Alternate possible answer.
This code demonstrates
A plot of a surface and its correponding wireframe
The creation of data and its plot of 3d lines (draped on the surface in 1) at specified values of x and y
Projections of the 3d lines (in 2) on to the frame walls
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt
from scipy import interpolate
import numpy as np
# use the test data for plotting
fig = plt.figure(1, figsize=(6,6), facecolor='w', edgecolor='gray')
ax = fig.gca(projection='3d')
X, Y, Z = axes3d.get_test_data(0.1) #get 3d data at appropriate density
# create an interpolating function
# can take a long time if data is too large
f1 = interpolate.interp2d(X, Y, Z, kind='linear')
# in general, one can use a set of other X,Y,Z that cover a surface
# preferably, (X,Y) are in grid arrangement
# make up a new set of 3d data to plot
# ranges of x1, and y1 will be inside (X,Y) of the data obtained above
# related grid, x1g,y1g,z1g will be obtained from meshgrid and the interpolated function
x1 = np.linspace(-15,15,10)
y1 = np.linspace(-15,15,10)
x1g, y1g = np.meshgrid(x1, y1)
z1g = f1(x1, y1) #dont use (x1g, y1g)
# prep data for 3d line on the surface (X,Y,Z) at x=7.5
n = 12
x_pf = 7.5
x5 = x_pf*np.ones(n)
y5 = np.linspace(-15, 15, n)
z5 = f1(x_pf, y5)
# x5,y5,z5 can be used to plot 3d line on the surface (X,Y,Z)
# prep data for 3d line on the surface (X,Y,Z) at y=6
y_pf = 6
x6 = np.linspace(-15, 15, n)
y6 = x_pf*np.ones(n)
z6 = f1(x6, y_pf)
# x6,y6,z6 can be used to plot 3d line on the surface (X,Y,Z)
ax = fig.gca(projection='3d')
ax.plot_surface(x1g, y1g, z1g, alpha=0.25)
ax.plot_wireframe(x1g, y1g, z1g, rstride=2, cstride=2, color='black', zorder=10, alpha=1, lw=0.8)
# 3D lines that follow the surface
ax.plot(x5,y5,z5.flatten(), color='red', lw=4)
ax.plot(x6,y6,z6.flatten(), color='green', lw=4)
# projections of 3d curves
# project red and green lines to the walls
ax.plot(-15*np.ones(len(y5)), y5, z5.flatten(), color='red', lw=4, linestyle=':', alpha=0.6)
ax.plot(x6, 15*np.ones(len(x6)), z6.flatten(), color='green', lw=4, linestyle=':', alpha=0.6)
# projections on other sides (become vertical lines)
# change to if True, to plot these
if False:
ax.plot(x5, 15*np.ones(len(x5)), z5.flatten(), color='red', lw=4, alpha=0.3)
ax.plot(-15*np.ones(len(x6)), y6, z6.flatten(), color='green', lw=4, alpha=0.3)
ax.set_title("Projections of 3D lines")
# set limits
ax.set_xlim(-15, 15.5)
ax.set_ylim(-15.5, 15)
plt.show();
(Answer to question 1) To plot the intersections between the surface and the specified planes (y=-20, and y=20), one need to find what Y[?]=-20 and 20. By inspection, I found that Y[100]=20, Y[20]=-20.
The relevant code to plot the lines of intersection:
# By inspection, Y[100]=20, Y[20]=-20
ax.plot3D(X[100], Y[100], Z[100], color='red', lw=6) # line-1 at y=20
ax.plot3D(X[20], Y[20], Z[20], color='green', lw=6) # line-2 at y=-20
# Project them on Z=-100 plane
ax.plot3D(X[100], Y[100], -100, color='red', lw=3) # projection of Line-1
ax.plot3D(X[20], Y[20], -100, color='green', lw=3) # projection of Line-2
The output plot:
(Answer to question 2) To get better plot with the wireframe standout from the surface plot. The surface plot must be partially transparent, which is achieved by setting option alpha=0.6. The relevant code follows.
Z1 = Z-Z.min()
Z1 = Z1/Z.max()
Xall = zoom(X,3)
Yall = zoom(Y,3)
Zz = zoom(Z1, 3)
surf = ax.plot_surface(Xall, Yall, Zz, rstride=10, cstride=10,
facecolors = cm.jet(Zz/np.amax(Zz)),
linewidth=0, antialiased=True,
alpha= 0.6)
# Wireframe
ax.plot_wireframe(X, Y, Z, rstride=5, cstride=5, color='black', alpha=1, lw=0.8)
The plot is:
In the plot below, taken from matplotlib's gallery, contourf is used to create a 2d plot beneath the 3d one. My question is, is it possible to use imshow to do the same thing? I would like the colors in the 2d plot to be smoother.
Making the 2d plot seems to be possible because contourf accepts a zdir argument, while I've looked and imshow doesn't. That suggests that it isn't possible, but why not? pcolor would also get the job done, is it possible with that?
Just specify the levels= option for the contourf, e.g.
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt,numpy as np
plt.clf()
fig = plt.figure(1)
ax = fig.gca(projection='3d')
X, Y, Z = axes3d.get_test_data(0.05)
ax.plot_surface(X, Y, Z, rstride=8, cstride=8, alpha=0.3)
cset = ax.contourf(X, Y, Z, zdir='z', offset=-100,
levels=np.linspace(-100,100,1200),cmap=plt.cm.jet)
cset = ax.contourf(X, Y, Z, zdir='x', offset=-40, cmap=plt.cm.jet)
cset = ax.contourf(X, Y, Z, zdir='y', offset=40, cmap=plt.cm.jet)
ax.set_xlabel('X')
ax.set_xlim(-40, 40)
ax.set_ylabel('Y')
ax.set_ylim(-40, 40)
ax.set_zlabel('Z')
ax.set_zlim(-100, 100)
plt.show()
A little longer code then sega_sai's answer but faster and to my experience much better for more complex surfaces.
Use plot_surface to plot a flat surface where you want it and facecolors to color it with the values you want
You might need to make your data smoother with scipy's zoom
from mpl_toolkits.mplot3d import axes3d
import matplotlib.pyplot as plt,numpy as np
plt.clf()
fig = plt.figure(1)
ax = fig.gca(projection='3d')
X, Y, Z = axes3d.get_test_data(0.05)
ax.plot_surface(X, Y, Z, rstride=8, cstride=8, alpha=0.3)
cset = ax.contourf(X, Y, Z, zdir='x', offset=-40, cmap=plt.cm.jet)
cset = ax.contourf(X, Y, Z, zdir='y', offset=40, cmap=plt.cm.jet)
### strating here:
# normalize Z to [0..1]
Z=Z-Z.min()
Z=Z/Z.max()
#use zoom to make your data smoother
from scipy.ndimage.interpolation import zoom
#make data 5 times smoother
X=zoom(X,5)
Y=zoom(Y,5)
Z=zoom(Z,5)
#draw a surface at -100, using the facecolors command to color it with the values of Z
cset = ax.plot_surface(X, Y, np.zeros_like(Z)-100,facecolors=plt.cm.jet(Z),shade=False)
ax.set_xlabel('X')
ax.set_xlim(-40, 40)
ax.set_ylabel('Y')
ax.set_ylim(-40, 40)
ax.set_zlabel('Z')
ax.set_zlim(-100, 100)
plt.show()
This also makes it a little harder to create a color bar, in order to that:
cb = plt.cm.ScalarMappable(cmap=plt.cm.jet)
cb.set_array(Z)
plt.colorbar(cb)
plt.show()