I'm new in Python. I'm using Windows 7.
When I install pip on my computer, I need to use the installing program: get-pip.py.
I found 3 ways to run this .py file:
In cmd, type "python get-pip.py"
Open it with IDLE and F5
Double click get-pip.py
I have two questions:
The only way can install it is "1. In cmd, type "python get-pip.py". I wonder what's the difference between 1 2 and 3?
Usually, when I double click .py file, it is usually opened by idle(default). But this time, when I double click get-pip.py, it begins running as if a .exe file. Why?
Thank you.
Answer to question 1.
If you run python from within a command window (cmd) you will be able to see the output if any. As opposed to double clicking it which will run the program and close it unless the program is supposed to do otherwise. And Idle is mimicking the open command window.
One thing to watch out for is having 2 python interpreters on the system. If you are just starting out I would avoid installing a 2nd one. Removing old python interpreters is as easy as removing the folder they are in. You said it "runs differently" which makes me think this is a concern.
Answer to question 2
You can change what program uses the file. You can have idle read it, or the python interpreter run it. check out http://www.thewindowsclub.com/change-file-associations-windows for info on how to change that behavior.
Related
I tried to run a python program in VS Code. But my program didn't run. The terminal opened and a weird arrow was there in the terminal. This is the screenshot of that.
This is the weird arrow and the program is not running. Any ideas why this is happening and how to fix it?
Thanks in advance.
Firstly, the arrows are included in the default python IDE means that VScode ran the command to execute your code. Give your pc a restart. Now, let us check if python is working or not or VS code is having some trouble. Type the following command in cmd to execute the code-
python "$PATH"
Rember to replace $PATH to the path of the file i.e where your file is stored. For eg. I've my python files stored in D drive in a python folder, so I'll use-
python "D:\Python\Hello.py"
If this works, python is working fine and if not, try reinstalling python and check the box which says Add python to Path or Environment variables. Then open VS code try to run the program again. But click the button only once and be patient because clicking it multiple times causes execute the same command again and cause a problem. It's my personal experience. Wait 5 minutes. Not works. Don't worry, there's a problem with the run extension you are using. I'll recommend the Code runner by Jun han. I personally use it. Type this in the extension search box-
formulahendry.code-runner
Install it and then try again.
Kill the terminal, and retry. If not work, restart the VSCode.
Path must be messed up and I can't fix it.
In the command prompt I am trying to open and run a python program that I made in IDLE. I am running Python 3.8.5. According to Automate the Boring Stuff, I should just be able to do:
py birthdays.py
But when I do that I get:
C:\Users\name\AppData\Local\Programs\Python\Python38-32\python.exe: can't open file 'birtdays.py': [Errno 2] No such file or directory
All of my scripts are located in: C:\Users\henri\AppData\Local\Programs\Python\Python38-32.
The only thing that I could think of is that it is going one step too far and searching in python.exe instead of just Python38-32. But Ii'm not even sure it works like that.
I tried to add the exact path using:
set PATH=%PATH%;C:\Users\name\AppData\Local\Programs\Python\Python38-32
But when I do this and press enter nothing happens.
when I want to use CMD to run python scripts, I just use
cd\
to back the main root of drive C. then use
cd folderAddress
for several time until to reach the exact scrip containing folder. Finally, I type
python scriptName.py
In your command prompt type python.The output should be python 3.** (depending on your python version).
If you see the python version it's working fine. In command prompt navigate to the folder that you have your python file using cmd command. then type
python birtdays.py
Don't forget the space after python.
I have made a Python program that uses output.to_csv('results.csv'). When I run it in Spyder it creates that CSV file. But when I double click on it nothing happens. Cmd appears and closes but nothing on the folder, no results.csv.
What am I missing? What more do I have to do?
Run the program from the command line itself instead of double-clicking the .py file.
I assume you are on Windows since you mention CMD. First, cd into the directory containing your program. Then, run python <program>.py or python3 <program>.py depending on your installation.
This time, you will see any output or error messages that appear in CMD without it immediately closing.
If the .csv file really exists, you should be able to go to your File Explorer and find the file at the top of the "Quick Access" section. Right-click the file and hover over "Open With >". Then select Notepad and a notepad will open up showing your results.
If you do not see the file, then try running your program on the command prompt (for Windows):
Press the windows key and type "cmd" in the search bar.
Choose "Command Prompt"
Go to the dir of your program using the cd command
Type python <program name>.py
If there are no errors, follow the steps in the first paragraph.
Ok i guess windows is not recommended at all for this type of tasks. I mean running something simple as create such file is like trying to kill the Lernaean Hydra.
What i did is i just runned it with anaconda prompt and it worked sweet! Thanks for help. Thanks to all!
PS: I'm seriously considering changing to Linux after this
For anyone having the same problem, but have anaconda installed. 1) Open Anaconda Prompt, 2) use cd (1 space) then adress of the folder which contains your py program (eg. cd C:\Users\Bernie\Desktop\tasos) and hit enter, 3) on the next line that appears type: python program_name.py, 4)Hit enter, 5)success!
although I have been using python a long time very easily in a Linux environment, I have tremendous trouble to even install it correctly in a windows environment. I hope this is a question to be asked here, as it is not directly a programming question.
Especially, I have the following problems:
When on the command line, python is not a recognized command. Do I have to set the Windows path manually myself? If so, how to do that?
When starting a python script, should this be done with python.exe or pythonw.exe? What is the difference?
I also tried to install ipython several times, it never got installed (even after following the starting ipythonenter link description here thread.
When starting a script with python.exe, a window pops up and closes immediately. I saw some hints in putting in a readline command, which is of no help if there is a syntax error in the script. So how to be able to keep the window open, or how to run the command on the cmd.exe?
Thank you for any help on these items.
Alex
1) Look here: www.computerhope.com/issues/ch000549.htm
2) It has already been answered, always try to use search before asking question:
pythonw.exe or python.exe?
4) When using cmd.exe just navigate to your script folder using dir for changing directories and C:,D:,etc. for changing drives. Then run script by typing just the script name. When installed correctly, Python automatically launches .py scripts with python, so you don't have to write 'python' before script name. When run in cmd, window will stay open. If you want it to stay open even when launching script with double-click, use function waiting for user input, see here How to keep a Python script output window open?
You might want to use Python3.3, there is a new launcher for Python scripts in it. By that, you can start Python scripts with py <scriptname> which has the benefit of being installed in your path (C:\Windows\system32) and you can use a shebang to tell whether the script is for Python2 or Python3.
Also
In addition to the launcher, the Windows installer now includes an
option to add the newly installed Python to the system PATH
(contributed by Brian Curtin in issue 3561).
How do I run a Python file from the Windows Command Line (cmd.exe) so that I won't have to re-enter the code each time?
Wouldn't you simply save your Python code into a file, and then execute that file using Python?
Save your code into a file called Test.py.
And then run it?
$ C:\Python24\Python.exe C:\Temp\Test.py
If you don't want to install an IDE, you can also use IDLE which includes a Python editor and a console to test things out, this is part of the standard installation.
If you installed the python.org version, you will see an IDLE (Python GUI) in your start menu. I would recommend adding it to your Quick Launch or your desktop - whatever you are most familiar with. Then right-click on the shortcut you have created and change the "Start in" directory to your project directory or a place you can mess with, not the installation directory which is the default place and probably a bad idea.
When you double-click the shortcut it will launch IDLE, a console in which you can type in Python command and have history, completion, colours and so on. You can also start an editor to create a program file (like mentioned in the other posts). There is even a debugger.
If you saved your application in "test.py", you can start it from the editor itself. Or from the console with execfile("test.py"), import test (if that is a module), or finally from the debugger.
If you put the Python executable (python.exe) on your path, you can invoke your script using python script.py where script.py is the Python file that you want to execute.
Open a command prompt, by pressing Win+R and writing cmd in that , navigate to the script directory , and write : python script.py
A good tool to have is the IPython shell. Not only can it run your program (%run command), but it offers also many tools for using Python interactively in an efficient manner (automatic completion, syntax coloring, quick access to the documentation, good interaction with Matplotlib,…). After you install it, you'll have access to its shell in the Start menu.
You need to create environment variables. Follow the instructions here: http://www.voidspace.org.uk/python/articles/command_line.shtml#environment-variables
In DOS you can use edit to create/modify text files, then execute them by typing python [yourfile]