I'm using Python 3.4 on Windows. When I run a script, it complains
ImportError: No Module named 'PyQt4'
So I tried to install it, but pip install PyQt4 gives
Could not find any downloads that satisfy the requirement PyQt4
although it does show up when I run pip search PyQt4. I tried to pip install python-qt, which installed successfully but that didn't solve the problem.
What am I doing wrong?
Here are Windows wheel packages built by Chris Golke - Python Windows Binary packages - PyQt
In the filenames cp27 means C-python version 2.7, cp35 means python 3.5, etc.
Since Qt is a more complicated system with a compiled C++ codebase underlying the python interface it provides you, it can be more complex to build than just a pure python code package, which means it can be hard to install it from source.
Make sure you grab the correct Windows wheel file (python version, 32/64 bit), and then use pip to install it - e.g:
C:\path\where\wheel\is\> pip install PyQt4-4.11.4-cp35-none-win_amd64.whl
Should properly install if you are running an x64 build of Python 3.5.
QT no longer supports PyQt4, but you can install PyQt5 with pip:
pip install PyQt5
You can't use pip. You have to download from the Riverbank website and run the installer for your version of python. If there is no install for your version, you will have to install Python for one of the available installers, or build from source (which is rather involved). Other answers and comments have the links.
If you install PyQt4 on Windows, files wind up here by default:
C:\Python27\Lib\site-packages\PyQt4*.*
but it also leaves a file here:
C:\Python27\Lib\site-packages\sip.pyd
If you copy the both the sip.pyd and PyQt4 folder into your virtualenv things will work fine.
For example:
mkdir c:\code
cd c:\code
virtualenv BACKUP
cd c:\code\BACKUP\scripts
activate
Then with windows explorer copy from C:\Python27\Lib\site-packages the file (sip.pyd) and folder (PyQt4) mentioned above to C:\code\BACKUP\Lib\site-packages\
Then back at CLI:
cd ..
(c:\code\BACKUP)
python backup.py
The problem with trying to launch a script which calls PyQt4 from within virtualenv is that the virtualenv does not have PyQt4 installed and it doesn't know how to reference the default installation described above. But follow these steps to copy PyQt4 into your virtualenv and things should work great.
Earlier PyQt .exe installers were available directly from the website download page. Now with the release of PyQt4.12 , installers have been deprecated. You can make the libraries work somehow by compiling them but that would mean going to great lengths of trouble.
Otherwise you can use the previous distributions to solve your purpose. The .exe windows installers can be downloaded from :
https://sourceforge.net/projects/pyqt/files/PyQt4/PyQt-4.11.4/
It looks like you may have to do a bit of manual installation for PyQt4.
http://pyqt.sourceforge.net/Docs/PyQt4/installation.html
This might help a bit more, it's a bit more in a tutorial/set-by-step format:
http://movingthelamppost.com/blog/html/2013/07/12/installing_pyqt____because_it_s_too_good_for_pip_or_easy_install_.html
With current latest python 3.6.5
pip3 install PyQt5
works fine
For Windows:
download the appropriate version of the PyQt4 from here:
https://www.lfd.uci.edu/~gohlke/pythonlibs/#pyqt4
and install it using pip (example for Python3.6 - 64bit)
pip install PyQt4‑4.11.4‑cp36‑cp36m‑win_amd64.whl
Try this for PyQt5:
pip install PyQt5
Use the operating system on this link for PyQt4.
Or download the supported wheel for your platform on this link.
Else use this link for the windows executable installer.
Hopefully this helps you to install either PyQt4 or PyQt5.
install PyQt5 for Windows 10 and python 3.5+.
pip install PyQt5
If you have error while installing PyQt4.
Error: PyQt4-4.11.4-cp27-cp27m-win_amd64.whl is not a supported wheel on this
platform.
My system type is 64 bit, But to solve this error I have installed PyQt4 of 32 bit windows system, i.e PyQt4-4.11.4-cp27-cp27m-win32.whl - click here to see more versions.
Kindly select appropriate version of PyQt4 according to your installed python version.
You can also use this command to install PyQt5.
pip3 install PyQt5
I am using PyCharm, and was able to install PyQt5.
PyQt4, as well as PyQt4Enhanced and windows_whl both failed to install, I'm guessing that's because Qt4 is no longer supported.
Try using python 3.6,
then install sip
pip install sip
then follow the steps mentioned by #Jay https://stackoverflow.com/a/48078369/8352081
Related
I've coded a game in Pygame using Pycharm, and I want to make it into a downloadable desktop application so that other people can download and use it even if they do not have python or the necessary files. The problem is I don't know how to. I've heard of py2exe and py2app before. I tried py2exe but then realized that .exe was for windows, and I was using a Mac. I read the py2app documentation, but it was very confusing and hard to understand, and none of the things they said worked. They said to use the pip command to install py2app inside the terminal, but I tried it and it said that it did not recognize the pip command. Can someone please help? Thanks!
Sorry if this question is long. I am trying to tell as much information as possible.
You can use pyinstaller if you package the application in Mac OS it will run on Mac.
Click here for instruction on how to install the package and use it.
Which installation of Python do you use? I had bad experience with Homebrew when it came to packaging, then I've removed it and switched to Python3.9 downloaded directly from python.org and everything works well now.
Depending on your Python installation, it is possible that you don't have pip installed on your computer. Via terminal, you can check it using
python -m pip --version
and you should get a response of this type:
pip X.Y.Z from .../site-packages/pip (python X.Y)
If you don't have pip, you can either re-install Python as mentioned above, or you can just install pip using these instructions.
As soon as you have pip installed, you can install py2app using
pip install py2app
I tried to install the pyqt5 package für python 3.9 on Mac.
Since it didn't work via pip3 I installed it via Homebrew
% brew install pyqt5
and it seemed to work since the terminal says, if I try
pip3 install pyqt5
the requirements are already satisfied.
Yet, if I start PyCharm to to write and test my program it can't find the libraries etc.
What do I have to do?
I just tried to brew install pyqt5 on my Mac. brew then installed a new Python 3.9 interpreter (this is viewed as a dependency of pyqt5).
I suspect the same has happened on your system: brew has installed a whole new Python interpreter, and now when you type pip3 at the command line, you're finding the version of pip installed by brew, which is telling you that pyqt5 has been installed.
However, each Python installation on your system as its own set of packages. Your new Python interpreter has pyqt5 installed, but your original Python interpreter still doesn't.
I suspect that PyCharm is configured to use your default (original) Python interpreter, which doesn't have pyqt5 installed.
Try executing the following at your command prompt (terminal): which pip3. If you're shown a path /usr/local/Cellar/... then this confirms that when you type pip3 at the command line you're actually referring to the version of pip corresponding to a Python interpreter installed by brew.
OK, so what to do going forward?
Two options:
Work with this new Python installation. Then, you'll need to install all of the packages in your previous version of Python again (e.g. just because you had Numpy installed on your original Python installation doesn't mean you'll have it installed by default for your new Python interpreter). Further, you'll have to configure Pycharm to use this Python installation. I don't know the exact steps for this, but go to the Preferences tab and look for something along the lines of 'Python Interpreter' underneath 'Project Settings'.
Remove the new Python installation, figure out what's up with pip, install your desired package.
I'd go with 2). It can get messy to have multiple different versions of Python on your system, unless they're managed by an environment manager such as conda.
To that end, what went wrong when you first tried to install pyqt5?
I recently used homebrew to install pyqt (along with qt & sip), but get an import error whenever I try to import PyQt4 in Python 3 (which was also installed using homebrew). To confuse matters more, I am able to import PyQt4 on Python 2 via the terminal.
I'm totally new to working with Python packages and, with that, totally confused. Any thoughts on how I might be able to undo what I did and reinstall so that I can access PyQt via the usr/local/python3 installation?
Thanks in advance!
brew reinstall pyqt --with-python3 will get you sorted!
There will be seperatelibrary files for python2 and python3. From your question, it seems that you have installed pyqt for python2 which you can't import in python3.
For python3, you have to install specific package developed for python3.
Here is a similar question regarding python3 pyqt installation using homebrew. It says, there is currently some limitation with homebrew.
Install pyqt via homebrew with `--with-python3` but still goes to Python 2
EDIT:
Developer of homebrew has resolved the issue.
I'm trying to install PySide on my work computer. I got everything installed at home which was simple enough. However at work I'm stuck behind a firewall which I can't get around and therefore can't install PIP.
Is there a binary for PySide that I might be able to use or any other solution?
Thanks!
OS is Win 7 32-bit
Also I'm using Python 3.4
You will find it here (it is an executable):
http://www.lfd.uci.edu/~gohlke/pythonlibs/#pyside
Enjoy! :)
You can download the wheel distribution from PyPI [1] and install with PIP offline.
And you don't loose the benefits of installing packages via PIP.
https://pypi.python.org/pypi/PySide#downloads
Here is direct link to package for your system and python version: https://pypi.python.org/packages/3.4/P/PySide/PySide-1.2.2-cp34-none-win32.whl
Hey I am pretty new to Pyside and am not sure how to download it or Qt? I have a 64-bit Windows computer and am wondering what I need to download once I have downloaded Qt because there is a checklist for like Qt 5.3, Qt 5.2.1, etc. and I am not sure which to download because under those there are multiple options under them like MSCV2012 64-bit and mscv64-bit OpenGL. Basically I am just very lost on what I need and can't seem to find the answer. Could someone enlighten me?
Thanks!
Install pip:
Download pip installer from here and save it in a directory other than C.
If you haven't set your python path: follow this.
Open Command Prompt and cd to that directory where you saved the pip installer.
run: python get-pip.py
Install pyside:
Close and Reopen Command Prompt.
run: cd C:\Python27\Scripts
run: pip install -U PySide
PySide does not yet support the Qt 5.x branch.
Simply running pip install pyside will install bindings that support the Qt 4.8 branch. Thus, you need that version of Qt.
All the steps are mentioned in here, but for your convenience, here goes it inline:
Installing prerequisites
Install latest pip distribution: download get-pip.py [bootstrap.pypa.io] and run it using the python interpreter.
Installing PySide on a Windows System
To install PySide on Windows you can choose from the following options:
Use pip [pypi.python.org] to install the wheel binary packages by issuing the command:
pip install -U PySide
Use setuptools [pypi.python.org] to install the egg binary packages by issuing the command (deprecated):
easy_install -U PySide
Download and install the packages from the PyPI page [pypi.python.org]
Provided binaries are without any other external dependencies. All required Qt libraries, development tools and examples are included.
Then, you can grab the Qt 4.8.6 version from here:
http://qt-project.org/downloads
Please note that there is no installer for VS2012 off-hand, so you should use an older version or mingw. Alternatively, you could also build Qt 4 yourself.