We Keep Coding

Open/write deleting txt file contents? - python

I am bassicly trying to read a number from a file, convert it to an int, add one to it, then rewrite the new number back to the file. However every time I run this code when i open the .txt file it is blank. Any help would be appreciated thanks! I am a python newb.
f=open('commentcount.txt','r')
counts = f.readline()
f.close
counts1 = int(counts)
counts1 = counts1 + 1
print(counts1)
f2 = open('commentcount.txt','w') <---(the file overwriting seems to happen here?)
f2.write(str(counts1))

Having empty files
This issue is caused by you failing to close the file descriptor. You have f.close but it should be f.close() (a function call). And you also need an f2.close() in the end.
Without the close it takes a while until the contents of the buffer arrive in the file. And it is a good practice to close file descriptors as soon as they are not used.
As a side note, you can use the following syntactic sugar to ensure that the file descriptor is closed as soon as possible:
with open(file, mode) as f:
do_something_with(f)
Now, regarding the overwriting part:
Writing to file without overwriting the previous content.
Short answer: You don't open the file in the proper mode. Use the append mode ("a").
Long answer:
It is the intended behavior. Read the following:
>>> help(open)
Help on built-in function open in module __builtin__:
open(...)
open(name[, mode[, buffering]]) -> file object
Open a file using the file() type, returns a file object. This is the
preferred way to open a file. See file.__doc__ for further information.
>>> print file.__doc__
file(name[, mode[, buffering]]) -> file object
Open a file. The mode can be 'r', 'w' or 'a' for reading (default),
writing or appending. The file will be created if it doesn't exist
when opened for writing or appending; it will be truncated when
opened for writing. Add a 'b' to the mode for binary files.
Add a '+' to the mode to allow simultaneous reading and writing.
If the buffering argument is given, 0 means unbuffered, 1 means line
buffered, and larger numbers specify the buffer size. The preferred way
to open a file is with the builtin open() function.
Add a 'U' to mode to open the file for input with universal newline
support. Any line ending in the input file will be seen as a '\n'
in Python. Also, a file so opened gains the attribute 'newlines';
the value for this attribute is one of None (no newline read yet),
'\r', '\n', '\r\n' or a tuple containing all the newline types seen.
So, reading the manuals shows that if you want the content to be kept you should open in append mode:
open(file, "a")

you should use the with statement. this assume that the file descriptor is closed no matter what:
with open('file', 'r') as fd:
value = int(fd.read())
with open('file', 'w') as fd:
fd.write(value + 1)

You never close the file. If you don't properly close the file the OS might not commit any changes. To avoid this problem it is recommended that you use Python's with statement to open files as it it will close them for you once you are done with the file.
with open('my_file.txt', a) as f:
do_stuff()

python open file paramters:
w:
Opens a file for writing only. Overwrites the file if the file exists.
If the file does not exist, creates a new file for writing.
You can use a (append):
Opens a file for appending. The file pointer is at the end of the file
if the file exists. That is, the file is in the append mode. If the
file does not exist, it creates a new file for writing.
for more information you can read here
One more advice is to use with:
with open("x.txt","a") as f:
data = f.read()
............
For example:
with open('c:\commentcount.txt','r') as fp:
counts = fp.readline()
counts = str(int(counts) + 1)
with open('c:\commentcount.txt','w') as fp:
fp.write(counts)
Note this will work only if you have a file name commentcount and it has a int at the first line since r does not create new file, also it will be only one counter...it won't append a new number.

Related

How do I append to a file instead of overwriting it?

Set the mode in open() to "a" (append) instead of "w" (write):
with open("test.txt", "a") as myfile:
myfile.write("appended text")
The documentation lists all the available modes.

You need to open the file in append mode, by setting "a" or "ab" as the mode. See open().
When you open with "a" mode, the write position will always be at the end of the file (an append). You can open with "a+" to allow reading, seek backwards and read (but all writes will still be at the end of the file!).
Example:
>>> with open('test1','wb') as f:
f.write('test')
>>> with open('test1','ab') as f:
f.write('koko')
>>> with open('test1','rb') as f:
f.read()
'testkoko'
Note: Using 'a' is not the same as opening with 'w' and seeking to the end of the file - consider what might happen if another program opened the file and started writing between the seek and the write. On some operating systems, opening the file with 'a' guarantees that all your following writes will be appended atomically to the end of the file (even as the file grows by other writes).
A few more details about how the "a" mode operates (tested on Linux only). Even if you seek back, every write will append to the end of the file:
>>> f = open('test','a+') # Not using 'with' just to simplify the example REPL session
>>> f.write('hi')
>>> f.seek(0)
>>> f.read()
'hi'
>>> f.seek(0)
>>> f.write('bye') # Will still append despite the seek(0)!
>>> f.seek(0)
>>> f.read()
'hibye'
In fact, the fopen manpage states:
Opening a file in append mode (a as the first character of mode)
causes all subsequent write operations to this stream to occur at
end-of-file, as if preceded the call:
fseek(stream, 0, SEEK_END);
Old simplified answer (not using with):
Example: (in a real program use with to close the file - see the documentation)
>>> open("test","wb").write("test")
>>> open("test","a+b").write("koko")
>>> open("test","rb").read()
'testkoko'

I always do this,
f = open('filename.txt', 'a')
f.write("stuff")
f.close()
It's simple, but very useful.

Python has many variations off of the main three modes, these three modes are:
'w' write text
'r' read text
'a' append text
So to append to a file it's as easy as:
f = open('filename.txt', 'a')
f.write('whatever you want to write here (in append mode) here.')
Then there are the modes that just make your code fewer lines:
'r+' read + write text
'w+' read + write text
'a+' append + read text
Finally, there are the modes of reading/writing in binary format:
'rb' read binary
'wb' write binary
'ab' append binary
'rb+' read + write binary
'wb+' read + write binary
'ab+' append + read binary

You probably want to pass "a" as the mode argument. See the docs for open().
with open("foo", "a") as f:
f.write("cool beans...")
There are other permutations of the mode argument for updating (+), truncating (w) and binary (b) mode but starting with just "a" is your best bet.

You can also do it with print instead of write:
with open('test.txt', 'a') as f:
print('appended text', file=f)
If test.txt doesn't exist, it will be created...

when we using this line open(filename, "a"), that a indicates the appending the file, that means allow to insert extra data to the existing file.
You can just use this following lines to append the text in your file
def FileSave(filename,content):
with open(filename, "a") as myfile:
myfile.write(content)
FileSave("test.txt","test1 \n")
FileSave("test.txt","test2 \n")

The 'a' parameter signifies append mode. If you don't want to use with open each time, you can easily write a function to do it for you:
def append(txt='\nFunction Successfully Executed', file):
with open(file, 'a') as f:
f.write(txt)
If you want to write somewhere else other than the end, you can use 'r+'†:
import os
with open(file, 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Finally, the 'w+' parameter grants even more freedom. Specifically, it allows you to create the file if it doesn't exist, as well as empty the contents of a file that currently exists.
† Credit for this function goes to #Primusa

You can also open the file in r+ mode and then set the file position to the end of the file.
import os
with open('text.txt', 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Opening the file in r+ mode will let you write to other file positions besides the end, while a and a+ force writing to the end.

if you want to append to a file
with open("test.txt", "a") as myfile:
myfile.write("append me")
We declared the variable myfile to open a file named test.txt. Open takes 2 arguments, the file that we want to open and a string that represents the kinds of permission or operation we want to do on the file
here is file mode options
Mode Description
'r' This is the default mode. It Opens file for reading.
'w' This Mode Opens file for writing.
If file does not exist, it creates a new file.
If file exists it truncates the file.
'x' Creates a new file. If file already exists, the operation fails.
'a' Open file in append mode.
If file does not exist, it creates a new file.
't' This is the default mode. It opens in text mode.
'b' This opens in binary mode.
'+' This will open a file for reading and writing (updating)

If multiple processes are writing to the file, you must use append mode or the data will be scrambled. Append mode will make the operating system put every write, at the end of the file irrespective of where the writer thinks his position in the file is. This is a common issue for multi-process services like nginx or apache where multiple instances of the same process, are writing to the same log
file. Consider what happens if you try to seek, then write:
Example does not work well with multiple processes:
f = open("logfile", "w"); f.seek(0, os.SEEK_END); f.write("data to write");
writer1: seek to end of file. position 1000 (for example)
writer2: seek to end of file. position 1000
writer2: write data at position 1000 end of file is now 1000 + length of data.
writer1: write data at position 1000 writer1's data overwrites writer2's data.
By using append mode, the operating system will place any write at the end of the file.
f = open("logfile", "a"); f.seek(0, os.SEEK_END); f.write("data to write");
Append most does not mean, "open file, go to end of the file once after opening it". It means, "open file, every write I do will be at the end of the file".
WARNING: For this to work you must write all your record in one shot, in one write call. If you split the data between multiple writes, other writers can and will get their writes in between yours and mangle your data.

Sometimes, beginners have this problem because they attempt to open and write to a file in a loop:
for item in my_data:
with open('results.txt', 'w') as f:
f.write(some_calculation(item))
The problem is that every time the file is opened for writing, it will be truncated (cleared out).
We can solve this by opening in append mode instead; but in cases like this, it will normally be better to solve the problem by inverting the logic. If the file is opened only once, then it won't get overwritten each time; and we can keep writing to it as long as it is open - we don't have to re-open it for each write (it would be pointless for Python to make things work that way, since it would add to the required code for no benefit).
Thus:
with open('results.txt', 'w') as f:
for item in my_data:
f.write(some_calculation(item))

The simplest way to append more text to the end of a file would be to use:
with open('/path/to/file', 'a+') as file:
file.write("Additions to file")
file.close()
The a+ in the open(...) statement instructs to open the file in append mode and allows read and write access.
It is also always good practice to use file.close() to close any files that you have opened once you are done using them.

How do I append to a file instead of overwriting it?

Set the mode in open() to "a" (append) instead of "w" (write):
with open("test.txt", "a") as myfile:
myfile.write("appended text")
The documentation lists all the available modes.

You need to open the file in append mode, by setting "a" or "ab" as the mode. See open().
When you open with "a" mode, the write position will always be at the end of the file (an append). You can open with "a+" to allow reading, seek backwards and read (but all writes will still be at the end of the file!).
Example:
>>> with open('test1','wb') as f:
f.write('test')
>>> with open('test1','ab') as f:
f.write('koko')
>>> with open('test1','rb') as f:
f.read()
'testkoko'
Note: Using 'a' is not the same as opening with 'w' and seeking to the end of the file - consider what might happen if another program opened the file and started writing between the seek and the write. On some operating systems, opening the file with 'a' guarantees that all your following writes will be appended atomically to the end of the file (even as the file grows by other writes).
A few more details about how the "a" mode operates (tested on Linux only). Even if you seek back, every write will append to the end of the file:
>>> f = open('test','a+') # Not using 'with' just to simplify the example REPL session
>>> f.write('hi')
>>> f.seek(0)
>>> f.read()
'hi'
>>> f.seek(0)
>>> f.write('bye') # Will still append despite the seek(0)!
>>> f.seek(0)
>>> f.read()
'hibye'
In fact, the fopen manpage states:
Opening a file in append mode (a as the first character of mode)
causes all subsequent write operations to this stream to occur at
end-of-file, as if preceded the call:
fseek(stream, 0, SEEK_END);
Old simplified answer (not using with):
Example: (in a real program use with to close the file - see the documentation)
>>> open("test","wb").write("test")
>>> open("test","a+b").write("koko")
>>> open("test","rb").read()
'testkoko'

I always do this,
f = open('filename.txt', 'a')
f.write("stuff")
f.close()
It's simple, but very useful.

Python has many variations off of the main three modes, these three modes are:
'w' write text
'r' read text
'a' append text
So to append to a file it's as easy as:
f = open('filename.txt', 'a')
f.write('whatever you want to write here (in append mode) here.')
Then there are the modes that just make your code fewer lines:
'r+' read + write text
'w+' read + write text
'a+' append + read text
Finally, there are the modes of reading/writing in binary format:
'rb' read binary
'wb' write binary
'ab' append binary
'rb+' read + write binary
'wb+' read + write binary
'ab+' append + read binary

You probably want to pass "a" as the mode argument. See the docs for open().
with open("foo", "a") as f:
f.write("cool beans...")
There are other permutations of the mode argument for updating (+), truncating (w) and binary (b) mode but starting with just "a" is your best bet.

You can also do it with print instead of write:
with open('test.txt', 'a') as f:
print('appended text', file=f)
If test.txt doesn't exist, it will be created...

when we using this line open(filename, "a"), that a indicates the appending the file, that means allow to insert extra data to the existing file.
You can just use this following lines to append the text in your file
def FileSave(filename,content):
with open(filename, "a") as myfile:
myfile.write(content)
FileSave("test.txt","test1 \n")
FileSave("test.txt","test2 \n")

The 'a' parameter signifies append mode. If you don't want to use with open each time, you can easily write a function to do it for you:
def append(txt='\nFunction Successfully Executed', file):
with open(file, 'a') as f:
f.write(txt)
If you want to write somewhere else other than the end, you can use 'r+'†:
import os
with open(file, 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Finally, the 'w+' parameter grants even more freedom. Specifically, it allows you to create the file if it doesn't exist, as well as empty the contents of a file that currently exists.
† Credit for this function goes to #Primusa

You can also open the file in r+ mode and then set the file position to the end of the file.
import os
with open('text.txt', 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Opening the file in r+ mode will let you write to other file positions besides the end, while a and a+ force writing to the end.

if you want to append to a file
with open("test.txt", "a") as myfile:
myfile.write("append me")
We declared the variable myfile to open a file named test.txt. Open takes 2 arguments, the file that we want to open and a string that represents the kinds of permission or operation we want to do on the file
here is file mode options
Mode Description
'r' This is the default mode. It Opens file for reading.
'w' This Mode Opens file for writing.
If file does not exist, it creates a new file.
If file exists it truncates the file.
'x' Creates a new file. If file already exists, the operation fails.
'a' Open file in append mode.
If file does not exist, it creates a new file.
't' This is the default mode. It opens in text mode.
'b' This opens in binary mode.
'+' This will open a file for reading and writing (updating)

If multiple processes are writing to the file, you must use append mode or the data will be scrambled. Append mode will make the operating system put every write, at the end of the file irrespective of where the writer thinks his position in the file is. This is a common issue for multi-process services like nginx or apache where multiple instances of the same process, are writing to the same log
file. Consider what happens if you try to seek, then write:
Example does not work well with multiple processes:
f = open("logfile", "w"); f.seek(0, os.SEEK_END); f.write("data to write");
writer1: seek to end of file. position 1000 (for example)
writer2: seek to end of file. position 1000
writer2: write data at position 1000 end of file is now 1000 + length of data.
writer1: write data at position 1000 writer1's data overwrites writer2's data.
By using append mode, the operating system will place any write at the end of the file.
f = open("logfile", "a"); f.seek(0, os.SEEK_END); f.write("data to write");
Append most does not mean, "open file, go to end of the file once after opening it". It means, "open file, every write I do will be at the end of the file".
WARNING: For this to work you must write all your record in one shot, in one write call. If you split the data between multiple writes, other writers can and will get their writes in between yours and mangle your data.

Sometimes, beginners have this problem because they attempt to open and write to a file in a loop:
for item in my_data:
with open('results.txt', 'w') as f:
f.write(some_calculation(item))
The problem is that every time the file is opened for writing, it will be truncated (cleared out).
We can solve this by opening in append mode instead; but in cases like this, it will normally be better to solve the problem by inverting the logic. If the file is opened only once, then it won't get overwritten each time; and we can keep writing to it as long as it is open - we don't have to re-open it for each write (it would be pointless for Python to make things work that way, since it would add to the required code for no benefit).
Thus:
with open('results.txt', 'w') as f:
for item in my_data:
f.write(some_calculation(item))

The simplest way to append more text to the end of a file would be to use:
with open('/path/to/file', 'a+') as file:
file.write("Additions to file")
file.close()
The a+ in the open(...) statement instructs to open the file in append mode and allows read and write access.
It is also always good practice to use file.close() to close any files that you have opened once you are done using them.

How do I append to a file instead of overwriting it?

Set the mode in open() to "a" (append) instead of "w" (write):
with open("test.txt", "a") as myfile:
myfile.write("appended text")
The documentation lists all the available modes.

You need to open the file in append mode, by setting "a" or "ab" as the mode. See open().
When you open with "a" mode, the write position will always be at the end of the file (an append). You can open with "a+" to allow reading, seek backwards and read (but all writes will still be at the end of the file!).
Example:
>>> with open('test1','wb') as f:
f.write('test')
>>> with open('test1','ab') as f:
f.write('koko')
>>> with open('test1','rb') as f:
f.read()
'testkoko'
Note: Using 'a' is not the same as opening with 'w' and seeking to the end of the file - consider what might happen if another program opened the file and started writing between the seek and the write. On some operating systems, opening the file with 'a' guarantees that all your following writes will be appended atomically to the end of the file (even as the file grows by other writes).
A few more details about how the "a" mode operates (tested on Linux only). Even if you seek back, every write will append to the end of the file:
>>> f = open('test','a+') # Not using 'with' just to simplify the example REPL session
>>> f.write('hi')
>>> f.seek(0)
>>> f.read()
'hi'
>>> f.seek(0)
>>> f.write('bye') # Will still append despite the seek(0)!
>>> f.seek(0)
>>> f.read()
'hibye'
In fact, the fopen manpage states:
Opening a file in append mode (a as the first character of mode)
causes all subsequent write operations to this stream to occur at
end-of-file, as if preceded the call:
fseek(stream, 0, SEEK_END);
Old simplified answer (not using with):
Example: (in a real program use with to close the file - see the documentation)
>>> open("test","wb").write("test")
>>> open("test","a+b").write("koko")
>>> open("test","rb").read()
'testkoko'

I always do this,
f = open('filename.txt', 'a')
f.write("stuff")
f.close()
It's simple, but very useful.

Python has many variations off of the main three modes, these three modes are:
'w' write text
'r' read text
'a' append text
So to append to a file it's as easy as:
f = open('filename.txt', 'a')
f.write('whatever you want to write here (in append mode) here.')
Then there are the modes that just make your code fewer lines:
'r+' read + write text
'w+' read + write text
'a+' append + read text
Finally, there are the modes of reading/writing in binary format:
'rb' read binary
'wb' write binary
'ab' append binary
'rb+' read + write binary
'wb+' read + write binary
'ab+' append + read binary

You probably want to pass "a" as the mode argument. See the docs for open().
with open("foo", "a") as f:
f.write("cool beans...")
There are other permutations of the mode argument for updating (+), truncating (w) and binary (b) mode but starting with just "a" is your best bet.

You can also do it with print instead of write:
with open('test.txt', 'a') as f:
print('appended text', file=f)
If test.txt doesn't exist, it will be created...

when we using this line open(filename, "a"), that a indicates the appending the file, that means allow to insert extra data to the existing file.
You can just use this following lines to append the text in your file
def FileSave(filename,content):
with open(filename, "a") as myfile:
myfile.write(content)
FileSave("test.txt","test1 \n")
FileSave("test.txt","test2 \n")

The 'a' parameter signifies append mode. If you don't want to use with open each time, you can easily write a function to do it for you:
def append(txt='\nFunction Successfully Executed', file):
with open(file, 'a') as f:
f.write(txt)
If you want to write somewhere else other than the end, you can use 'r+'†:
import os
with open(file, 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Finally, the 'w+' parameter grants even more freedom. Specifically, it allows you to create the file if it doesn't exist, as well as empty the contents of a file that currently exists.
† Credit for this function goes to #Primusa

You can also open the file in r+ mode and then set the file position to the end of the file.
import os
with open('text.txt', 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Opening the file in r+ mode will let you write to other file positions besides the end, while a and a+ force writing to the end.

if you want to append to a file
with open("test.txt", "a") as myfile:
myfile.write("append me")
We declared the variable myfile to open a file named test.txt. Open takes 2 arguments, the file that we want to open and a string that represents the kinds of permission or operation we want to do on the file
here is file mode options
Mode Description
'r' This is the default mode. It Opens file for reading.
'w' This Mode Opens file for writing.
If file does not exist, it creates a new file.
If file exists it truncates the file.
'x' Creates a new file. If file already exists, the operation fails.
'a' Open file in append mode.
If file does not exist, it creates a new file.
't' This is the default mode. It opens in text mode.
'b' This opens in binary mode.
'+' This will open a file for reading and writing (updating)

If multiple processes are writing to the file, you must use append mode or the data will be scrambled. Append mode will make the operating system put every write, at the end of the file irrespective of where the writer thinks his position in the file is. This is a common issue for multi-process services like nginx or apache where multiple instances of the same process, are writing to the same log
file. Consider what happens if you try to seek, then write:
Example does not work well with multiple processes:
f = open("logfile", "w"); f.seek(0, os.SEEK_END); f.write("data to write");
writer1: seek to end of file. position 1000 (for example)
writer2: seek to end of file. position 1000
writer2: write data at position 1000 end of file is now 1000 + length of data.
writer1: write data at position 1000 writer1's data overwrites writer2's data.
By using append mode, the operating system will place any write at the end of the file.
f = open("logfile", "a"); f.seek(0, os.SEEK_END); f.write("data to write");
Append most does not mean, "open file, go to end of the file once after opening it". It means, "open file, every write I do will be at the end of the file".
WARNING: For this to work you must write all your record in one shot, in one write call. If you split the data between multiple writes, other writers can and will get their writes in between yours and mangle your data.

Sometimes, beginners have this problem because they attempt to open and write to a file in a loop:
for item in my_data:
with open('results.txt', 'w') as f:
f.write(some_calculation(item))
The problem is that every time the file is opened for writing, it will be truncated (cleared out).
We can solve this by opening in append mode instead; but in cases like this, it will normally be better to solve the problem by inverting the logic. If the file is opened only once, then it won't get overwritten each time; and we can keep writing to it as long as it is open - we don't have to re-open it for each write (it would be pointless for Python to make things work that way, since it would add to the required code for no benefit).
Thus:
with open('results.txt', 'w') as f:
for item in my_data:
f.write(some_calculation(item))

The simplest way to append more text to the end of a file would be to use:
with open('/path/to/file', 'a+') as file:
file.write("Additions to file")
file.close()
The a+ in the open(...) statement instructs to open the file in append mode and allows read and write access.
It is also always good practice to use file.close() to close any files that you have opened once you are done using them.

How do I append to a file instead of overwriting it?

Set the mode in open() to "a" (append) instead of "w" (write):
with open("test.txt", "a") as myfile:
myfile.write("appended text")
The documentation lists all the available modes.

You need to open the file in append mode, by setting "a" or "ab" as the mode. See open().
When you open with "a" mode, the write position will always be at the end of the file (an append). You can open with "a+" to allow reading, seek backwards and read (but all writes will still be at the end of the file!).
Example:
>>> with open('test1','wb') as f:
f.write('test')
>>> with open('test1','ab') as f:
f.write('koko')
>>> with open('test1','rb') as f:
f.read()
'testkoko'
Note: Using 'a' is not the same as opening with 'w' and seeking to the end of the file - consider what might happen if another program opened the file and started writing between the seek and the write. On some operating systems, opening the file with 'a' guarantees that all your following writes will be appended atomically to the end of the file (even as the file grows by other writes).
A few more details about how the "a" mode operates (tested on Linux only). Even if you seek back, every write will append to the end of the file:
>>> f = open('test','a+') # Not using 'with' just to simplify the example REPL session
>>> f.write('hi')
>>> f.seek(0)
>>> f.read()
'hi'
>>> f.seek(0)
>>> f.write('bye') # Will still append despite the seek(0)!
>>> f.seek(0)
>>> f.read()
'hibye'
In fact, the fopen manpage states:
Opening a file in append mode (a as the first character of mode)
causes all subsequent write operations to this stream to occur at
end-of-file, as if preceded the call:
fseek(stream, 0, SEEK_END);
Old simplified answer (not using with):
Example: (in a real program use with to close the file - see the documentation)
>>> open("test","wb").write("test")
>>> open("test","a+b").write("koko")
>>> open("test","rb").read()
'testkoko'

I always do this,
f = open('filename.txt', 'a')
f.write("stuff")
f.close()
It's simple, but very useful.

Python has many variations off of the main three modes, these three modes are:
'w' write text
'r' read text
'a' append text
So to append to a file it's as easy as:
f = open('filename.txt', 'a')
f.write('whatever you want to write here (in append mode) here.')
Then there are the modes that just make your code fewer lines:
'r+' read + write text
'w+' read + write text
'a+' append + read text
Finally, there are the modes of reading/writing in binary format:
'rb' read binary
'wb' write binary
'ab' append binary
'rb+' read + write binary
'wb+' read + write binary
'ab+' append + read binary

You probably want to pass "a" as the mode argument. See the docs for open().
with open("foo", "a") as f:
f.write("cool beans...")
There are other permutations of the mode argument for updating (+), truncating (w) and binary (b) mode but starting with just "a" is your best bet.

You can also do it with print instead of write:
with open('test.txt', 'a') as f:
print('appended text', file=f)
If test.txt doesn't exist, it will be created...

when we using this line open(filename, "a"), that a indicates the appending the file, that means allow to insert extra data to the existing file.
You can just use this following lines to append the text in your file
def FileSave(filename,content):
with open(filename, "a") as myfile:
myfile.write(content)
FileSave("test.txt","test1 \n")
FileSave("test.txt","test2 \n")

The 'a' parameter signifies append mode. If you don't want to use with open each time, you can easily write a function to do it for you:
def append(txt='\nFunction Successfully Executed', file):
with open(file, 'a') as f:
f.write(txt)
If you want to write somewhere else other than the end, you can use 'r+'†:
import os
with open(file, 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Finally, the 'w+' parameter grants even more freedom. Specifically, it allows you to create the file if it doesn't exist, as well as empty the contents of a file that currently exists.
† Credit for this function goes to #Primusa

You can also open the file in r+ mode and then set the file position to the end of the file.
import os
with open('text.txt', 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Opening the file in r+ mode will let you write to other file positions besides the end, while a and a+ force writing to the end.

if you want to append to a file
with open("test.txt", "a") as myfile:
myfile.write("append me")
We declared the variable myfile to open a file named test.txt. Open takes 2 arguments, the file that we want to open and a string that represents the kinds of permission or operation we want to do on the file
here is file mode options
Mode Description
'r' This is the default mode. It Opens file for reading.
'w' This Mode Opens file for writing.
If file does not exist, it creates a new file.
If file exists it truncates the file.
'x' Creates a new file. If file already exists, the operation fails.
'a' Open file in append mode.
If file does not exist, it creates a new file.
't' This is the default mode. It opens in text mode.
'b' This opens in binary mode.
'+' This will open a file for reading and writing (updating)

If multiple processes are writing to the file, you must use append mode or the data will be scrambled. Append mode will make the operating system put every write, at the end of the file irrespective of where the writer thinks his position in the file is. This is a common issue for multi-process services like nginx or apache where multiple instances of the same process, are writing to the same log
file. Consider what happens if you try to seek, then write:
Example does not work well with multiple processes:
f = open("logfile", "w"); f.seek(0, os.SEEK_END); f.write("data to write");
writer1: seek to end of file. position 1000 (for example)
writer2: seek to end of file. position 1000
writer2: write data at position 1000 end of file is now 1000 + length of data.
writer1: write data at position 1000 writer1's data overwrites writer2's data.
By using append mode, the operating system will place any write at the end of the file.
f = open("logfile", "a"); f.seek(0, os.SEEK_END); f.write("data to write");
Append most does not mean, "open file, go to end of the file once after opening it". It means, "open file, every write I do will be at the end of the file".
WARNING: For this to work you must write all your record in one shot, in one write call. If you split the data between multiple writes, other writers can and will get their writes in between yours and mangle your data.

Sometimes, beginners have this problem because they attempt to open and write to a file in a loop:
for item in my_data:
with open('results.txt', 'w') as f:
f.write(some_calculation(item))
The problem is that every time the file is opened for writing, it will be truncated (cleared out).
We can solve this by opening in append mode instead; but in cases like this, it will normally be better to solve the problem by inverting the logic. If the file is opened only once, then it won't get overwritten each time; and we can keep writing to it as long as it is open - we don't have to re-open it for each write (it would be pointless for Python to make things work that way, since it would add to the required code for no benefit).
Thus:
with open('results.txt', 'w') as f:
for item in my_data:
f.write(some_calculation(item))

The simplest way to append more text to the end of a file would be to use:
with open('/path/to/file', 'a+') as file:
file.write("Additions to file")
file.close()
The a+ in the open(...) statement instructs to open the file in append mode and allows read and write access.
It is also always good practice to use file.close() to close any files that you have opened once you are done using them.

How do I append to a file instead of overwriting it?

Set the mode in open() to "a" (append) instead of "w" (write):
with open("test.txt", "a") as myfile:
myfile.write("appended text")
The documentation lists all the available modes.

You need to open the file in append mode, by setting "a" or "ab" as the mode. See open().
When you open with "a" mode, the write position will always be at the end of the file (an append). You can open with "a+" to allow reading, seek backwards and read (but all writes will still be at the end of the file!).
Example:
>>> with open('test1','wb') as f:
f.write('test')
>>> with open('test1','ab') as f:
f.write('koko')
>>> with open('test1','rb') as f:
f.read()
'testkoko'
Note: Using 'a' is not the same as opening with 'w' and seeking to the end of the file - consider what might happen if another program opened the file and started writing between the seek and the write. On some operating systems, opening the file with 'a' guarantees that all your following writes will be appended atomically to the end of the file (even as the file grows by other writes).
A few more details about how the "a" mode operates (tested on Linux only). Even if you seek back, every write will append to the end of the file:
>>> f = open('test','a+') # Not using 'with' just to simplify the example REPL session
>>> f.write('hi')
>>> f.seek(0)
>>> f.read()
'hi'
>>> f.seek(0)
>>> f.write('bye') # Will still append despite the seek(0)!
>>> f.seek(0)
>>> f.read()
'hibye'
In fact, the fopen manpage states:
Opening a file in append mode (a as the first character of mode)
causes all subsequent write operations to this stream to occur at
end-of-file, as if preceded the call:
fseek(stream, 0, SEEK_END);
Old simplified answer (not using with):
Example: (in a real program use with to close the file - see the documentation)
>>> open("test","wb").write("test")
>>> open("test","a+b").write("koko")
>>> open("test","rb").read()
'testkoko'

I always do this,
f = open('filename.txt', 'a')
f.write("stuff")
f.close()
It's simple, but very useful.

Python has many variations off of the main three modes, these three modes are:
'w' write text
'r' read text
'a' append text
So to append to a file it's as easy as:
f = open('filename.txt', 'a')
f.write('whatever you want to write here (in append mode) here.')
Then there are the modes that just make your code fewer lines:
'r+' read + write text
'w+' read + write text
'a+' append + read text
Finally, there are the modes of reading/writing in binary format:
'rb' read binary
'wb' write binary
'ab' append binary
'rb+' read + write binary
'wb+' read + write binary
'ab+' append + read binary

You probably want to pass "a" as the mode argument. See the docs for open().
with open("foo", "a") as f:
f.write("cool beans...")
There are other permutations of the mode argument for updating (+), truncating (w) and binary (b) mode but starting with just "a" is your best bet.

You can also do it with print instead of write:
with open('test.txt', 'a') as f:
print('appended text', file=f)
If test.txt doesn't exist, it will be created...

when we using this line open(filename, "a"), that a indicates the appending the file, that means allow to insert extra data to the existing file.
You can just use this following lines to append the text in your file
def FileSave(filename,content):
with open(filename, "a") as myfile:
myfile.write(content)
FileSave("test.txt","test1 \n")
FileSave("test.txt","test2 \n")

The 'a' parameter signifies append mode. If you don't want to use with open each time, you can easily write a function to do it for you:
def append(txt='\nFunction Successfully Executed', file):
with open(file, 'a') as f:
f.write(txt)
If you want to write somewhere else other than the end, you can use 'r+'†:
import os
with open(file, 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Finally, the 'w+' parameter grants even more freedom. Specifically, it allows you to create the file if it doesn't exist, as well as empty the contents of a file that currently exists.
† Credit for this function goes to #Primusa

You can also open the file in r+ mode and then set the file position to the end of the file.
import os
with open('text.txt', 'r+') as f:
f.seek(0, os.SEEK_END)
f.write("text to add")
Opening the file in r+ mode will let you write to other file positions besides the end, while a and a+ force writing to the end.

if you want to append to a file
with open("test.txt", "a") as myfile:
myfile.write("append me")
We declared the variable myfile to open a file named test.txt. Open takes 2 arguments, the file that we want to open and a string that represents the kinds of permission or operation we want to do on the file
here is file mode options
Mode Description
'r' This is the default mode. It Opens file for reading.
'w' This Mode Opens file for writing.
If file does not exist, it creates a new file.
If file exists it truncates the file.
'x' Creates a new file. If file already exists, the operation fails.
'a' Open file in append mode.
If file does not exist, it creates a new file.
't' This is the default mode. It opens in text mode.
'b' This opens in binary mode.
'+' This will open a file for reading and writing (updating)

If multiple processes are writing to the file, you must use append mode or the data will be scrambled. Append mode will make the operating system put every write, at the end of the file irrespective of where the writer thinks his position in the file is. This is a common issue for multi-process services like nginx or apache where multiple instances of the same process, are writing to the same log
file. Consider what happens if you try to seek, then write:
Example does not work well with multiple processes:
f = open("logfile", "w"); f.seek(0, os.SEEK_END); f.write("data to write");
writer1: seek to end of file. position 1000 (for example)
writer2: seek to end of file. position 1000
writer2: write data at position 1000 end of file is now 1000 + length of data.
writer1: write data at position 1000 writer1's data overwrites writer2's data.
By using append mode, the operating system will place any write at the end of the file.
f = open("logfile", "a"); f.seek(0, os.SEEK_END); f.write("data to write");
Append most does not mean, "open file, go to end of the file once after opening it". It means, "open file, every write I do will be at the end of the file".
WARNING: For this to work you must write all your record in one shot, in one write call. If you split the data between multiple writes, other writers can and will get their writes in between yours and mangle your data.

Sometimes, beginners have this problem because they attempt to open and write to a file in a loop:
for item in my_data:
with open('results.txt', 'w') as f:
f.write(some_calculation(item))
The problem is that every time the file is opened for writing, it will be truncated (cleared out).
We can solve this by opening in append mode instead; but in cases like this, it will normally be better to solve the problem by inverting the logic. If the file is opened only once, then it won't get overwritten each time; and we can keep writing to it as long as it is open - we don't have to re-open it for each write (it would be pointless for Python to make things work that way, since it would add to the required code for no benefit).
Thus:
with open('results.txt', 'w') as f:
for item in my_data:
f.write(some_calculation(item))

The simplest way to append more text to the end of a file would be to use:
with open('/path/to/file', 'a+') as file:
file.write("Additions to file")
file.close()
The a+ in the open(...) statement instructs to open the file in append mode and allows read and write access.
It is also always good practice to use file.close() to close any files that you have opened once you are done using them.