I am just starting Django these days but I cannot run this command
django-admin.py startproject myproject
Well, CMD does not prompt to say that this command is not recognized. Instead, it just open up my Sublime with the file django-admin.py open. and of course no folder named myproject is created inside the current folder.
I managed to start a Django project by typing commands like
python C:\Python27\Scripts\django-admin.py startproject myproject
But when I omit the part about the absolute path information of django-admin.py, then the command does not work, saying python cannot find such a file inside the current directory.
is there any way I should try to use shorter commands? (PS: I do have C:\Python27\ and C:\Python27\Scripts\ in the PATH)
The easiest way (recommended by the docs) is to just copy django-admin.py to your project's directory.
Technical details: There are workaround in setuptools to make entry points work correctly on Windows, by installing a .exe file that will run correctly even if Python is not set as the default handler for .py files, but Django is not using setuptools but distutils directly. I am not aware of any discussion about moving to setuptools.
Alternatively you can set python.exe as the default program to open .py files, instead of your text editor.
In the past I have had a similar issue on windows. I found that using django-admin as listed below worked.
django-admin.py startproject myproject
I found that it was easy to copy the file django-admin.py into the folder that I wanted the stuff in. Navigate to the file in the command line and then run.
'python django-admin.py startproject myProject'
I have just started using python3.4 and I found everything (packages like pip and django) in c:\pythonpath\scirpts dir. Added that into system path and everything works good. e.g. django-admin startproject mysite
Related
whenever i give
django-admin.py startproject
i get a notepad of django-admin. So that means i type in my website inside that ?
i have executed the django-admin.py and django-admin.pyc in cmd also. Still it shows. What should I do ?
You have - for some reason - created a virtual environment inside the actual Python source directory on Windows.
There is nothing wrong with this, except you may face issues when you uninstall or upgrade Python.
To fix your immediate problem, you need to follow these steps:
Close all command prompt windows.
Open a new command prompt.
Type the following and hit ENTER which will activate your virtual environment:
C:\Python27\Scripts\pymote_ven\Scripts\activate.bat
Now, type the following to start your project:
python django-admin.py startproject nameofyourproject
You should also read the documentation because you have confused the directories that are involved.
I have added C:\Python27\ for python and C:\Python27\Lib\site-packages\django\bin\ for django to the path variable of environment settings.
But whenever I am running the command
django-admin.py startproject myapp
it is simply opening the django-admin.py file in notepad and not creating any custom django directory and file structure.
I am not able to start with my app development. I didn't faced any problem when I work on ubuntu.
try python django-admin.py startproject myapp
also make sure you have properly installed python ... it should auto-associate files ending in .py
Am new to django and i have been trying to set up a project with no success. When i type
django-admin.py startproject mysite i get this.
C:\Users\WASSWA SAM\Documents\django\djcode>django-admin.py startproject mysite
Usage: django-admin.py subcommand [options] [args]
Options:
-v VERBOSITY, --verbosity=VERBOSITY
Verbosity level; 0=minimal output, 1=normal output,
2=all output
etc....
I have added it to my path like so
C:\Python26\Lib\site-packages\django\bin
And when i import django from interactive mode it works perfectly. What could be the problem. I am using Windows 7 and django 1.3.1. I installed it using setup.py.
I had the same problem; I found a working solution at https://groups.google.com/forum/#!msg/django-users/b76qSG3mV6g/jP1o0ny3i2kJ:
python C:\Python27\Scripts\django-admin.py startproject mysite
This is an error with Python's installation on Windows. If you have the regkey entry
HKEY_CLASSES_ROOT\py_auto_file\shell\command\open\
change the value from
"C:\Python27\python.exe" "%1"
to
"C:\Python27\python.exe" "%1" %*
(Or your equivalent installation location)
This ensures that command-line arguments are passed onto python, rather than explicitly ignored. This is fixed in the latest install of Python 2.7. %* is argv[]. "%1" is the script's absolute path.
I had the same problem and could not solve it for hours. Create a new project from Pycharm or any other program you are using, install Django and then instead of running
django-admin.py startproject *project_name* .
run
django-admin startproject *project_name* .
Ommiting .py extension worked for me and everything is running as expected now.
I don't think you need to have django\bin in the path.
I think what you need to add to your PATH though is C:\Python26\scripts and then you should be able to run the startproject script.
In my case, I use eclipse and you can start an eclipse project from within the eclipse environment using PyDev.
Go up to File > New > Other > (within the PyDev Folder) > PyDev Django Project. In the wizard it will allow you to setup most of the commonly used features of Django.
I'm using Python 2.7, Django 1.2.5 and on Windows 7.
I am not sure what I've done. I used to be able to create Django projects like
python django-admin.py startproject test
Now however I get this error.
Can't open file 'django-admin.py':
[Errno 2] No such file or directory
I can type the following which works.
python C:\Python27\Scripts\django-admin.py startproject test
How can I have it the way it used to be? Not having the type the full path to the django-admin.py file.
Things I've already tried:
I uninstalled Python and manually removed the values from the PATH variable in Windows. Reinstalled Python. Deleted Django and reinstalled it too.
I've added C:\Python27\Scripts to my PATH and PYTHONPATH variable under Environmental Variables in Windows.
Any suggestions?
My PATH variable contains
C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\ActiveState Komodo Edit 6\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\django-apps;F:\My_Projects;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Mercurial\bin;C:\Python27;C:\Python27\Scripts
PYTHONPATH has
C:\Python27;C:\Python27\Lib;C:\Python27\DLLs;C:\Python27\Lib\lib-tk;C:\Python27\Scripts;C:\django-apps;f:\my_projects
I had this same problem with slightly newer versions of Python 2.7.x and Django - and it is not the PATH. This is all I had to do to fix it in Windows XP:
Find a .py file (any, even a blank).
Right click on it and choose: "Open with>" and then select "Choose program...".
This pops up a list of all programs - select python, and check the box "Always use the selected program to open this kind of file" and then click OK.
Checking this box resets file associations and fixes this problem for the command line.
The cause of the problem: Telling Windows to open up .py files in a text editor as default.
If C:\Python27\Scripts is in your Path, just type in:
django-admin.py startproject proj
There should be a file association with .py and try to execute. If you prefix with python the next command is a file path.
I've never been able to do python django-admin.py -- I get the same error you describe.
Make sure python is associated with .py. You can check via file properties (opens with...) or typing assoc .py in cmd.
Here is what I did to get this working:
Installed Python 2.7 to C:\Python27 using the install package for Windows at python.org
I chose to install the latest release version of Django (1.3) (not the development trunk)
Installed Django following the instructions here: http://docs.djangoproject.com/en/dev/topics/install/
I'm only doing local development, so I skipped install of Apache and mod_wsgi (as directed in Django instructions)
I don't need a database for my app, so I skipped "Get your database running" section in Django instructions; and I skipped "Remove any old versions of Django" (didn't have any installed)
I skipped down the instructions to "Installing an official release"
I installed bsdtar as directed in order to untar the release files on my windows machine - ran no problem.
Being on Windows, I started a cmd shell with admin privileges and ran the command "setup.py install" - ran no problem
I followed the instruction to verify Django install: running import django and django.print get_version() - returned 1.3, success
Then it came time to run django-admin.py startproject myproject - I received similar errors to the above, and when trying to run django-admin.py from within the python interpreter, I received syntax errors pointing at the arguments. Strange.
Found this thread, and ran this, which worked: c:\Python27\Scripts\django-admin.py startproject myproject and it worked.
Still curious, I wanted to see if I could make it work from cmd prompt, without the paths, since it seemed that should work - and it didn't.
This is what I did beyond the install instructions that made it work for me on Windows:
Verified the file associations, using info from this post - all associations good.
Used Start|Computer|System Properties|Advanced System Properties|Environment Variables dialog to set the environment variables as follows:
Set New System Variable: PYTHONPATH = c:\Python27\Lib;c:\Python27\Scripts
Edit existing User variable: PATH added: C:\Python27;C:\Python27\Scripts to the end.
The result:
.py files now execute from cmd command line (no need to run python interpreter first)
e.g. the command django-admin.py startproject mynewproject ran just fine.
Please post any questions in the comments, maybe I can help.
Is it possible you associated your .py files with another program (like a text editor)? I had this problem, too, after associating .py files with gedit.
I'd have the problem if I did this:
python django-admin.py startproject myproject
Once I reassociated .py files to python this problem went away.
Gosh! It drove me crazy! Just do the following!
python C:\python27\scripts\django-admin.py startproject mysite
The problem seems to be with the file association. After adding the PATH variables, remove all "py" associations instead of linking them to your Python executable:
Remove the file type ".py " from the registry or by using a small
free tool for Windows Vista/Windows 7 called 'Unassoc' (google for Windows 7 unassoc).
In my case simply unassociating the file type was not enough. I had to remove the file type entirely using the unassoc tool.
Now you should be good to go.
I've solved it! It's the command line to open a file .py.
It has to be like so:
"C:\Python27\python.exe" "%1" %*
mine was:
"C:\Python27\python.exe" "%1" without the final %*
I've used FileTypesMan to edit because Windows 7 can't edit this property.
In my case it was solved by adding the path to django-admin.py.
The instruction in windows with a python 7 and django 1.11 is:
python c:\Python27\Lib\site-packages\django\bin\django-admin.py startproject mysite
First, set the path in PowerShell (in your $profile) like this:
$env:PATH = "C:\Python27\;C:\Python27\Scripts;c:\python27\lib\site-packages\django\bin\;"
Then, to get .py files to open in PowerShell rather than cmd, add this line:
$env:PATHEXT += ";.py"
Finally, to be able to just type "django-admin" and have it work, add this line:
function django-admin {python (gcm django-admin.py | resolve-path) $args}
That should do the trick.
After I installed an IDE, I had a similar (if not the same) problem. Sure enough, the .py "Open With" setting had been changed, and changing it back to the Python Launcher for Windows did the trick.
On Windows, I used
django-admin startproject test
and it seemed to have worked.
Since the path is too long, I moved the folders to a shorter path inside C: /. This way I call it faster, there is a problem with the route. I use Windows 10 with Django 3.0.5, so it turns out like this: python C:\Python38\Scripts\django-admin.py startproject test
The problem for me was the installation of Visual Studio.
I tried to install django-admin, which is usely automatically set up:
pip3 install django-admin
and it gave to me :
error: Microsoft Visual C++ 14.0 or greater is required.
So, I install Microsoft Visual Studio, and then it works.
Make sure that you cd is where you saved your Notepad++ Python file. If you saved it under your \Python27\ directory, then while in the terminal or PowerShell window, type cd C:\Python27 and press enter.
This will open that directory so when you type python filename.py it will find it and run it. Just remember to save all .py files to the same directory, so you have no further problems.
No Windows, usei:
python -m django startproject mysite
after installing django I tried django-admin.py startproject mysite and that worked, then I got a simple site working and I wanted to start on something real, so I tried django-admin.py startproject newsite and nothing happened. Whenever I try the command nothing happens now.. any idea what is wrong?
For anyone stumbling across this now, this problem is a result of Windows not obeying the #!C:\Path\To\Virtualenv\Scripts\Python.exe hashbang at the top of django-admin.py, and therefore running it with the wrong python.exe (evidently a virtualenv bug).
However, with virtualenv active, you can use the following command, which will result in the correct python being used, and everything being ok:
python C:\Path\To\Virtualenv\Scripts\django-admin.py startproject <project_name>
If you are running Windows for a quick fix you can create a batch file with the following values:
#echo off
#echo "Enter Proyect name"
set /p proj_name=
set building="Building django project %proj_name%"
#echo %building%
python c:/Python27/Scripts/django-admin.py startproject %proj_name%
pause
I named the file "django.bat" and to use it you can just simply add a copy in the directory you want to start the project, execute the file and it will ask you for a project name, provide one and then Voila!!
Hope this helps.
Do you have a DJANGO_SETTINGS_MODULE environment variable set (presumably from the mysite project)? If so, django thinks you're working on the old project and doesn't give you the startproject option. Try unsetting the environment variable and trying again.
For me worked without .py extension, since there was .exe by that name in my windows:
C:\Python27\Scripts\django-admin startproject HelloWorld
Try for this commond:
django-admin startproject mysite
instead of django-admin.py startproject mysite.
If everything is installed properly, when you open the command prompt,
navigate to the desktop folder with
cd C:\Users\YOURNAME\Desktop
then type
django-admin startproject YOURPROJECTNAME
The project should appear on your desktop.
If you didn't navigate to your desktop folder and run the command there, your project could be placed in the windows\system32 folder on the C drive.
Go on to c:/python**/Scripts/ you must find django-admin.py there that fixes your problem use the absolute path.
Try this instead! It also works inside virtualenv
python "C:\Python27\Scripts\django-admin.py" startproject test2
I'm on a Mac and had a similar problem after installing with pip3. I reinstalled and it corrected the error. You can try going to the #django irc channel at irc.freenodes
Try out this way.
1> Look where your python is installed if cannot find it in C:/ Python().
$ python
Python 2.6.6 (r266:84297, Aug 24 2010, 18:13:38) [MSC v.1500 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>> import sys
>>> sys.executable
'c:\\Python26\\python.exe'
>>> sys.exec_prefix
'c:\\Python26'
>>>
>>> print '\n'.join(sys.path)
c:\Python26\lib\site-packages\setuptools-0.6c11-py2.6.egg
c:\Python26\lib\site-packages\nose-1.0.0-py2.6.egg
C:\Windows\system32\python26.zip
c:\Python26\DLLs
c:\Python26\lib
c:\Python26\lib\plat-win
c:\Python26\lib\lib-tk
c:\Python26
c:\Python26\lib\site-packages
c:\Python26\lib\site-packages\win32
c:\Python26\lib\site-packages\win32\lib
c:\Python26\lib\site-packages\Pythonwin
c:\Python26\lib\site-packages\wx-2.8-msw-unicode
2> After that move into Scripts folder. There you may find django-admin.py. Now copy full path of that file.
3>Now run this command
python path of the file startproject name of Project
eg.
python C:\Users\UserName\AppData\Local\Programs\Python\Python35-32\Scripts\django-admin.py startproject mysite
hope this will work.
after years I have to answer this question because the answer is changed for WINDOWS now
python C:\Path\To\Virtualenv\Scripts\django-admin.exe startproject <project_name>
you can use .exe for windows in Scripts folder
Even I faced the same problem. I even tried adding the directory to Environmental variables but it was not working, so I had to use python -m django for it, but it didn't satisfy me, so I did a tricky thing.
Instead of adding the directory to Environmental variables, I copied the installed package and pasted it to the first directory (default directory) in environmental variable and it started working.
Try this solution:
1) Select a .py file and right click and select Open with...
2) Here select Python Launcher for Windows
This solution is provided for Windows OS
I have a easy solution for this. normally download the django-admin file from the web the add it to the python\script folder then add the C:\python\script to the environment variable then try the command i.e django-admin startproject
If you have pip installed in that environment you can always download the Django in the virtual environment and use it to start your project like I did instead of downloading it from web or changing environment variables.