We Keep Coding

python script does not rewrite the file on itself

so first and foremost i wanted to connect multiple lines into one and add ","
so in example
line1
line2
line2
to
line1,line2,line3
i managed to make it work with this script right here
filelink = input("Enter link here ")
fix = file = open(filelink, "r")
data=open(filelink).readlines()
for n,line in enumerate(data):
if line.startswith("line"):
data[n] = "\n"+line.rstrip()
else:
data[n]=line.rstrip()
print(','.join(data))
HOWEVER in the terminal itself it shows it executed perfectly but in the text file itself it's still remains the same no connected lines and no commas
side note. i would love some explanations how does the loop work and what "enumerate" stands for and why specifically this code i tried googling each one separately and understand the code but i didn't manage to find what i was looking for if anyone keen to explain the code line by line shortly i would be very appreciative
Thanks in advance <3

This is somewhat superfluous:
fix = file = open(filelink, "r")
That's assigning two names to the same file object, and you don't even use fix, so at least drop that part.
For handling files, you would be better using a context manager. That means that you can open a resource and they will automatically get closed for you once you're done (usually).
In any case, you opened in read mode with open(filelink, "r") so you'll never change the file contents. print(','.join(data)) will probably show you what you expect, but print() writes to stdout and the change will only be in your terminal. You will not modify the base file with this. But, I think you're sufficiently close that I'll try close the missing connection.
In this case, you need to:
open the file first in read mode to pull the data out.
Do the transform in python to the data
Open the file again in write mode (which wipes the existing contents)
Write the transformed data
So, like this:
filelink = input("Enter link here ")
with open(filelink) as infile: # context manager, by default in "r" mode
data = [item.strip() for item in infile.readlines()]
data = ','.join(data)
# Now write it back out
with open(filelink, "w") as outfile:
outfile.write(data)

Modifying letters in a file

I'm new to programming so I'm pretty lost. I'm currently learning Python and I need to open a text file and change every letter to the next one in the alphabet (e.g a -> b, b -> c, etc.). How would I go about writing a code like this?

This sounds like a neat problem to work on for a beginner.
Things you may want to look at:
The open() function, which allows you to open files and read/write to them. For example
https://docs.python.org/3/library/functions.html#open
with open('test.out', 'r+') as fi:
all_lines = fi.readlines() # Read all lines from the file
fi.write('this string will be written to the file')
# The file is closed at this point in the code; `with()` is a context manager, look that up
The os.replace() function, which lets you overwrite one file with another. You might try reading the input file, writing to a new output file, then overwriting the input file with the new output file; this will let you do that.
https://docs.python.org/3/library/os.html#os.replace
Replacing a character with the next increment of a character is an interesting twist, as it's not something that a lot of python programmers have to deal with. Here's one way to increment a character:
x = 'c'
print(chr(ord(x) + 1)) # will print 'd'
Without just giving away the answer, this should give you the pieces that you need to get started, feel free to ask more questions.

I think that this will work very well. The code can be shortened I think but Im still not sure how. Not an expert with with open statements.
with open("(your text file path)", "r") as f:
data = f.readline()
new_data = ""
for x in range(len(data)):
i = ord(data[x][0])
i += 1
x = chr(i)
new_data += x
print(new_data)
with open("(your text file path)", "w") as f:
f.write(new_data)
You must change your letters to numbers so that you can increment them by one, and then change them back to letters. This should work.

Read() function erases text in file [duplicate]

Started Python a week ago and I have some questions to ask about reading and writing to the same files. I've gone through some tutorials online but I am still confused about it. I can understand simple read and write files.
openFile = open("filepath", "r")
readFile = openFile.read()
print readFile
openFile = open("filepath", "a")
appendFile = openFile.write("\nTest 123")
openFile.close()
But, if I try the following I get a bunch of unknown text in the text file I am writing to. Can anyone explain why I am getting such errors and why I cannot use the same openFile object the way shown below.
# I get an error when I use the codes below:
openFile = open("filepath", "r+")
writeFile = openFile.write("Test abc")
readFile = openFile.read()
print readFile
openFile.close()
I will try to clarify my problems. In the example above, openFile is the object used to open file. I have no problems if I want write to it the first time. If I want to use the same openFile to read files or append something to it. It doesn't happen or an error is given. I have to declare the same/different open file object before I can perform another read/write action to the same file.
#I have no problems if I do this:
openFile = open("filepath", "r+")
writeFile = openFile.write("Test abc")
openFile2 = open("filepath", "r+")
readFile = openFile2.read()
print readFile
openFile.close()
I will be grateful if anyone can tell me what I did wrong here or is it just a Pythong thing. I am using Python 2.7. Thanks!

Updated Response:
This seems like a bug specific to Windows - http://bugs.python.org/issue1521491.
Quoting from the workaround explained at http://mail.python.org/pipermail/python-bugs-list/2005-August/029886.html
the effect of mixing reads with writes on a file open for update is
entirely undefined unless a file-positioning operation occurs between
them (for example, a seek()). I can't guess what
you expect to happen, but seems most likely that what you
intend could be obtained reliably by inserting
fp.seek(fp.tell())
between read() and your write().
My original response demonstrates how reading/writing on the same file opened for appending works. It is apparently not true if you are using Windows.
Original Response:
In 'r+' mode, using write method will write the string object to the file based on where the pointer is. In your case, it will append the string "Test abc" to the start of the file. See an example below:
>>> f=open("a","r+")
>>> f.read()
'Test abc\nfasdfafasdfa\nsdfgsd\n'
>>> f.write("foooooooooooooo")
>>> f.close()
>>> f=open("a","r+")
>>> f.read()
'Test abc\nfasdfafasdfa\nsdfgsd\nfoooooooooooooo'
The string "foooooooooooooo" got appended at the end of the file since the pointer was already at the end of the file.
Are you on a system that differentiates between binary and text files? You might want to use 'rb+' as a mode in that case.
Append 'b' to the mode to open the file in binary mode, on systems
that differentiate between binary and text files; on systems that
don’t have this distinction, adding the 'b' has no effect.
http://docs.python.org/2/library/functions.html#open

Every open file has an implicit pointer which indicates where data will be read and written. Normally this defaults to the start of the file, but if you use a mode of a (append) then it defaults to the end of the file. It's also worth noting that the w mode will truncate your file (i.e. delete all the contents) even if you add + to the mode.
Whenever you read or write N characters, the read/write pointer will move forward that amount within the file. I find it helps to think of this like an old cassette tape, if you remember those. So, if you executed the following code:
fd = open("testfile.txt", "w+")
fd.write("This is a test file.\n")
fd.close()
fd = open("testfile.txt", "r+")
print fd.read(4)
fd.write(" IS")
fd.close()
... It should end up printing This and then leaving the file content as This IS a test file.. This is because the initial read(4) returns the first 4 characters of the file, because the pointer is at the start of the file. It leaves the pointer at the space character just after This, so the following write(" IS") overwrites the next three characters with a space (the same as is already there) followed by IS, replacing the existing is.
You can use the seek() method of the file to jump to a specific point. After the example above, if you executed the following:
fd = open("testfile.txt", "r+")
fd.seek(10)
fd.write("TEST")
fd.close()
... Then you'll find that the file now contains This IS a TEST file..
All this applies on Unix systems, and you can test those examples to make sure. However, I've had problems mixing read() and write() on Windows systems. For example, when I execute that first example on my Windows machine then it correctly prints This, but when I check the file afterwards the write() has been completely ignored. However, the second example (using seek()) seems to work fine on Windows.
In summary, if you want to read/write from the middle of a file in Windows I'd suggest always using an explicit seek() instead of relying on the position of the read/write pointer. If you're doing only reads or only writes then it's pretty safe.
One final point - if you're specifying paths on Windows as literal strings, remember to escape your backslashes:
fd = open("C:\\Users\\johndoe\\Desktop\\testfile.txt", "r+")
Or you can use raw strings by putting an r at the start:
fd = open(r"C:\Users\johndoe\Desktop\testfile.txt", "r+")
Or the most portable option is to use os.path.join():
fd = open(os.path.join("C:\\", "Users", "johndoe", "Desktop", "testfile.txt"), "r+")
You can find more information about file IO in the official Python docs.

Reading and Writing happens where the current file pointer is and it advances with each read/write.
In your particular case, writing to the openFile, causes the file-pointer to point to the end of file. Trying to read from the end would result EOF.
You need to reset the file pointer, to point to the beginning of the file before through seek(0) before reading from it

You can read, modify and save to the same file in python but you have actually to replace the whole content in file, and to call before updating file content:
# set the pointer to the beginning of the file in order to rewrite the content
edit_file.seek(0)
I needed a function to go through all subdirectories of folder and edit content of the files based on some criteria, if it helps:
new_file_content = ""
for directories, subdirectories, files in os.walk(folder_path):
for file_name in files:
file_path = os.path.join(directories, file_name)
# open file for reading and writing
with io.open(file_path, "r+", encoding="utf-8") as edit_file:
for current_line in edit_file:
if condition in current_line:
# update current line
current_line = current_line.replace('john', 'jack')
new_file_content += current_line
# set the pointer to the beginning of the file in order to rewrite the content
edit_file.seek(0)
# delete actual file content
edit_file.truncate()
# rewrite updated file content
edit_file.write(new_file_content)
# empties new content in order to set for next iteration
new_file_content = ""
edit_file.close()

Python CSV seek not working?

file_handle = open("/var/www/transactions.csv", "a")
c = csv.writer(file_handle);
oldamount = amount / 1.98
file_handle.seek(0);
c.writerow( [addre, oldamount, "win"])
Here is my code
I wish to write [addre, oldamount, "win"]) to the start of my CSV file, however it's not working. It's still going to the bottom.

You are opening the file in append ("a") mode. The documentation for open() points out this behavior explicitly: "all writes append to the end of the file regardless of the current seek position".
It isn't possible to "just insert" text at the beginning of a file like you want to. You can either read the whole file, add your data in the front, and write it back out, or you live with the fact that the data goes at the end.
Example for rewriting:
with open("/var/www/transactions.csv", "r+") as f:
olddata = f.read()
f.seek(0)
c = csv.writer(f);
c.writerow([addre, oldamount, "win"])
f.write(olddata)
Note that this can corrupt your file if something goes wrong while writing. If you want to minimize that possibility, write to a new file, then os.rename() it to overwrite the old one.

How to erase the file contents of text file in Python?

I have text file which I want to erase in Python. How do I do that?

In python:
open('file.txt', 'w').close()
Or alternatively, if you have already an opened file:
f = open('file.txt', 'r+')
f.truncate(0) # need '0' when using r+

Opening a file in "write" mode clears it, you don't specifically have to write to it:
open("filename", "w").close()
(you should close it as the timing of when the file gets closed automatically may be implementation specific)

Not a complete answer more of an extension to ondra's answer
When using truncate() ( my preferred method ) make sure your cursor is at the required position.
When a new file is opened for reading - open('FILE_NAME','r') it's cursor is at 0 by default.
But if you have parsed the file within your code, make sure to point at the beginning of the file again i.e truncate(0)
By default truncate() truncates the contents of a file starting from the current cusror position.
A simple example

As #jamylak suggested, a good alternative that includes the benefits of context managers is:
with open('filename.txt', 'w'):
pass

When using with open("myfile.txt", "r+") as my_file:, I get strange zeros in myfile.txt, especially since I am reading the file first. For it to work, I had to first change the pointer of my_file to the beginning of the file with my_file.seek(0). Then I could do my_file.truncate() to clear the file.

Writing and Reading file content
def writeTempFile(text = None):
filePath = "/temp/file1.txt"
if not text: # If not provided return file content
f = open(filePath, "r")
slug = f.read()
return slug
else:
f = open(filePath, "a") # Create a blank file
f.seek(0) # sets point at the beginning of the file
f.truncate() # Clear previous content
f.write(text) # Write file
f.close() # Close file
return text
It Worked for me

If security is important to you then opening the file for writing and closing it again will not be enough. At least some of the information will still be on the storage device and could be found, for example, by using a disc recovery utility.
Suppose, for example, the file you're erasing contains production passwords and needs to be deleted immediately after the present operation is complete.
Zero-filling the file once you've finished using it helps ensure the sensitive information is destroyed.
On a recent project we used the following code, which works well for small text files. It overwrites the existing contents with lines of zeros.
import os
def destroy_password_file(password_filename):
with open(password_filename) as password_file:
text = password_file.read()
lentext = len(text)
zero_fill_line_length = 40
zero_fill = ['0' * zero_fill_line_length
for _
in range(lentext // zero_fill_line_length + 1)]
zero_fill = os.linesep.join(zero_fill)
with open(password_filename, 'w') as password_file:
password_file.write(zero_fill)
Note that zero-filling will not guarantee your security. If you're really concerned, you'd be best to zero-fill and use a specialist utility like File Shredder or CCleaner to wipe clean the 'empty' space on your drive.

You have to overwrite the file. In C++:
#include <fstream>
std::ofstream("test.txt", std::ios::out).close();

You can also use this (based on a few of the above answers):
file = open('filename.txt', 'w')
file.close()
of course this is a really bad way to clear a file because it requires so many lines of code, but I just wrote this to show you that it can be done in this method too.
happy coding!

You cannot "erase" from a file in-place unless you need to erase the end. Either be content with an overwrite of an "empty" value, or read the parts of the file you care about and write it to another file.

Assigning the file pointer to null inside your program will just get rid of that reference to the file. The file's still there. I think the remove() function in the c stdio.h is what you're looking for there. Not sure about Python.

Since text files are sequential, you can't directly erase data on them. Your options are:
The most common way is to create a new file. Read from the original file and write everything on the new file, except the part you want to erase. When all the file has been written, delete the old file and rename the new file so it has the original name.
You can also truncate and rewrite the entire file from the point you want to change onwards. Seek to point you want to change, and read the rest of file to memory. Seek back to the same point, truncate the file, and write back the contents without the part you want to erase.
Another simple option is to overwrite the data with another data of same length. For that, seek to the exact position and write the new data. The limitation is that it must have exact same length.
Look at the seek/truncate function/method to implement any of the ideas above. Both Python and C have those functions.

This is my method:
open the file using r+ mode
read current data from the file using file.read()
move the pointer to the first line using file.seek(0)
remove old data from the file using file.truncate(0)
write new content and then content that we saved using file.read()
So full code will look like this:
with open(file_name, 'r+') as file:
old_data = file.read()
file.seek(0)
file.truncate(0)
file.write('my new content\n')
file.write(old_data)
Because we are using with open, file will automatically close.