Related
I'm trying to delete each line which contains "annote = {" but my code is not working.
I have a file stored in a variable myFile and I want to go through every line of this file and delete every line which contains the string annote.
this is basically my code:
print(myFile.read()) //prints myFile
myFile.seek(0)
for lines in myFile:
if b"annote = {" in lines:
lines = lines.replace(b'.', b'')
myFile.seek(0)
print(myFile.read()) //this prints the exact same as the print method above so annote lines
//haven't been removed from this file
I have no idea why annote lines doesn't get removed. There is probably anything wrong with the replace method because it always is inside the if request but nothing happens with annote lines. I've also tried lines.replace(b'.', b'') instead of lines = lines.replace(b'.', b'') but nothing happened.
Hope anyone can help me with this problem
This will do it for you.
f.readlines() returns a list of text lines
Then you check for the lines that do not contain the things you do not want
Then you write them to a separate new file.
f2 = open('newtextfile.txt', 'w')
with open('text_remove_line.txt', 'r') as f:
for line in f.readlines():
if 'annote = {' not in line:
f2.write(line)
f2.close()
This should work:
with open('input.txt') as fin :
lines = fin.read().split('\n') # read the text, split into the lines
with open('output.txt', 'w') as fout :
# write out only the lines that does not contain the text 'annote = {'
fout.write( '\n'.join( [i for i in lines if i.find('annote = {') == -1] ))
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
In a file I have a names of planets:
sun moon jupiter saturn uranus neptune venus
I would like to say "replace saturn with sun". I have tried to write it as a list. I've tried different modes (write, append etc.)
I think I am struggling to understand the concept of iteration, especially when it comes to iterating over a list, dict, or str in file. I know it can be done using csv or json or even pickle module. But my objective is to get the grasp of iteration using for...loop to modify a txt file. And I want to do that using .txt file only.
with open('planets.txt', 'r+')as myfile:
for line in myfile.readlines():
if 'saturn' in line:
a = line.replace('saturn', 'sun')
myfile.write(str(a))
else:
print(line.strip())
Try this but keep in mind if you use string.replace method it will replace for example testsaturntest to testsuntest, you should use regex instead:
In [1]: cat planets.txt
saturn
In [2]: s = open("planets.txt").read()
In [3]: s = s.replace('saturn', 'sun')
In [4]: f = open("planets.txt", 'w')
In [5]: f.write(s)
In [6]: f.close()
In [7]: cat planets.txt
sun
This replaces the data in the file with the replacement you want and prints the values out:
with open('planets.txt', 'r+') as myfile:
lines = myfile.readlines()
modified_lines = map(lambda line: line.replace('saturn', 'sun'), lines)
with open('planets.txt', 'w') as f:
for line in modified_lines:
f.write(line)
print(line.strip())
Replacing the lines in-file is quite tricky, so instead I read the file, replaced the files and wrote them back to the file.
If you just want to replace the word in the file, you can do it like this:
import re
lines = open('planets.txt', 'r').readlines()
newlines = [re.sub(r'\bsaturn\b', 'sun', l) for l in lines]
open('planets.txt', 'w').writelines(newlines)
f = open("planets.txt","r+")
lines = f.readlines() #Read all lines
f.seek(0, 0); # Go to first char position
for line in lines: # get a single line
f.write(line.replace("saturn", "sun")) #replace and write
f.close()
I think its a clear guide :) You can find everything for this.
I have not tested your code but the issue with r+ is that you need to keep track of where you are in the file so that you can reset the file position so that you replace the current line instead of writing the replacement afterwords. I suggest creating a variable to keep track of where you are in the file so that you can call myfile.seek()
If I remove [1:], if works fine and prints all data.
f = open("test.csv", "r")
lines = f.readlines()
f.close()
print lines
result:
['title1,title2\raa,aaaa\rbb,bbbb\rcc,cccc']
but if I try to skip the first line by adding [1:]
f = open("test.csv", "r")
lines = f.readlines()[1:]
f.close()
print lines
it prints an empty array
[]
I'm using python 2.7.6.
Does anyone know why?
result:
['title1,title2\raa,aaaa\rbb,bbbb\rcc,cccc']
but if I try to skip the first line by adding [1:] it prints empty array
It looks like you have a platform line encoding issue. You're assuming that python reads this as a multi-line file; however, python only sees one line.
Modify your code to do this...
f = open("test.csv", "r")
lines = f.read().splitlines() # Thanks to Ashwini's comment for tip
f.close()
print lines