I cannot get autocomplete working for OpenCV (Python) on Windows.
According to Abid's instructions here, I pasted the cv2.pyd file in the C:\Python27\Lib\site-packages.
In the Python code, I import as follows:
import cv2.cv as cv
I have also installed numpy, and it created its own folder in site-packages unlike OpenCV (which I've pasted directly into site-packages).
With this setup, the code executes without any problems, even when OpenCV methods are called.
But I have not been able to get autocomplete to work. I have tried to get it to work on Sublime Text 2 (with SublimeCodeIntel) and PyCharm. In both IDEs, autocomplete works for the numpy import, but fails for the OpenCV import.
I'm using OpenCV 2.4.6, and Python 2.7 (32 bit).
Any possible solutions?
The reason it's not working is because you're using a .pyd file, which is essentially the same as a compiled .dll. Autocomplete works by reading the source .py files, which are plain text. Try installing the OpenCV and Intel Math Kernel Library optimized NumPy packages from Christoph Gohlke's Python Extension Packages for Windows repository, which is frequently updated and a must-use resource for anyone who does any kind of scientific Python computing on Windows. Make sure you delete the cv2.pyd and numpy directories from site-packages first. These new packages will install the .py source files needed by the autocomplete engine in Sublime Text.
EDIT
OK, so I wrote the above because it worked well for a bunch of other packages. I'm a Python 3 guy, and I never installed OpenCV from Gohlke because it only has Python 2 bindings. After reading #CrazyCoder's comment below, I booted up Win7, and indeed he's absolutely correct (and I should have realized this before) - since OpenCV is written in C/C++, the only .py file included in the Gohlke package is cv.py, whose entire contents are as follows:
from cv2.cv import *
The rest is contained in cv2.pyd and a bunch of .dlls. The full OpenCV Windows distribution from opencv.org is a 291 MB download, which expands to 3 GB, and the few .py files in there are involved in building OpenCV, and aren't any good for autocomplete purposes. So, unfortunately, I don't know if there's a solution to your problem at the moment. Just keep the docs handy, and perhaps check out OpenCV Computer Vision with Python from Packt/O'Reilly, published in April 2013.
I've had the same issue with PyCharm when building a custom version of OpenCV on windows. Here is what I did to fix it:
OpenCV made a folder in Python site-packages like so:
opencv site-packages
So what you need to do is just add the python-3.9 folder to your interpreter.
File
Settings...
Python interpreter
Three dots icon next to your interpreter -> Show all...
Select your interpreter and click on the "Show paths for selected interpreter" icon
Add the folder inside the cv2 site-packages
Now import the cv2 module normally.
The best way to solve all the problems of OPENCV-PYTHON is by uninstalling it and reinstalling it.
Even I faced the same problem.
I fixed it by:
python -m pip uninstall Opencv-python
Then I reinstalled it by using a lower version. But unfortunately, I did not know the versions of opencv; So by using a small trick you can get it by running:
python -m pip install opencv-python==
and you will get an error similar to this:
ERROR: Could not find a version that satisfies the requirement opencv-python== (from versions: 3.4.0.14, 3.4.10.37, 3.4.11.39, 3.4.11.41, 3.4.11.43, 3.4.11.45, 3.4.13.47, 3.4.15.55, 3.4.16.57, 3.4.16.59, 3.4.17.61, 3.4.17.63, 4.3.0.38, 4.4.0.40, 4.4.0.42, 4.4.0.44, 4.4.0.46, 4.5.1.48, 4.5.3.56, 4.5.4.58, 4.5.4.60, 4.5.5.62, 4.5.5.64) ERROR: No matching distribution found for opencv-python==
Here you can see all the versions of opencv-python; choose any one (but not the latest as the error occurs due the latest version of opencv-python. install it by using:
pip install opencv-python==3.4.17.61 (You can choose your version, but this version solved the issue for me)
then enjoy your coding....
Even AUTO-COMPLETE error in opencv-python gets solved.
HAPPY CODING
Related
I cannot get autocomplete working for OpenCV (Python) on Windows.
According to Abid's instructions here, I pasted the cv2.pyd file in the C:\Python27\Lib\site-packages.
In the Python code, I import as follows:
import cv2.cv as cv
I have also installed numpy, and it created its own folder in site-packages unlike OpenCV (which I've pasted directly into site-packages).
With this setup, the code executes without any problems, even when OpenCV methods are called.
But I have not been able to get autocomplete to work. I have tried to get it to work on Sublime Text 2 (with SublimeCodeIntel) and PyCharm. In both IDEs, autocomplete works for the numpy import, but fails for the OpenCV import.
I'm using OpenCV 2.4.6, and Python 2.7 (32 bit).
Any possible solutions?
The reason it's not working is because you're using a .pyd file, which is essentially the same as a compiled .dll. Autocomplete works by reading the source .py files, which are plain text. Try installing the OpenCV and Intel Math Kernel Library optimized NumPy packages from Christoph Gohlke's Python Extension Packages for Windows repository, which is frequently updated and a must-use resource for anyone who does any kind of scientific Python computing on Windows. Make sure you delete the cv2.pyd and numpy directories from site-packages first. These new packages will install the .py source files needed by the autocomplete engine in Sublime Text.
EDIT
OK, so I wrote the above because it worked well for a bunch of other packages. I'm a Python 3 guy, and I never installed OpenCV from Gohlke because it only has Python 2 bindings. After reading #CrazyCoder's comment below, I booted up Win7, and indeed he's absolutely correct (and I should have realized this before) - since OpenCV is written in C/C++, the only .py file included in the Gohlke package is cv.py, whose entire contents are as follows:
from cv2.cv import *
The rest is contained in cv2.pyd and a bunch of .dlls. The full OpenCV Windows distribution from opencv.org is a 291 MB download, which expands to 3 GB, and the few .py files in there are involved in building OpenCV, and aren't any good for autocomplete purposes. So, unfortunately, I don't know if there's a solution to your problem at the moment. Just keep the docs handy, and perhaps check out OpenCV Computer Vision with Python from Packt/O'Reilly, published in April 2013.
I've had the same issue with PyCharm when building a custom version of OpenCV on windows. Here is what I did to fix it:
OpenCV made a folder in Python site-packages like so:
opencv site-packages
So what you need to do is just add the python-3.9 folder to your interpreter.
File
Settings...
Python interpreter
Three dots icon next to your interpreter -> Show all...
Select your interpreter and click on the "Show paths for selected interpreter" icon
Add the folder inside the cv2 site-packages
Now import the cv2 module normally.
The best way to solve all the problems of OPENCV-PYTHON is by uninstalling it and reinstalling it.
Even I faced the same problem.
I fixed it by:
python -m pip uninstall Opencv-python
Then I reinstalled it by using a lower version. But unfortunately, I did not know the versions of opencv; So by using a small trick you can get it by running:
python -m pip install opencv-python==
and you will get an error similar to this:
ERROR: Could not find a version that satisfies the requirement opencv-python== (from versions: 3.4.0.14, 3.4.10.37, 3.4.11.39, 3.4.11.41, 3.4.11.43, 3.4.11.45, 3.4.13.47, 3.4.15.55, 3.4.16.57, 3.4.16.59, 3.4.17.61, 3.4.17.63, 4.3.0.38, 4.4.0.40, 4.4.0.42, 4.4.0.44, 4.4.0.46, 4.5.1.48, 4.5.3.56, 4.5.4.58, 4.5.4.60, 4.5.5.62, 4.5.5.64) ERROR: No matching distribution found for opencv-python==
Here you can see all the versions of opencv-python; choose any one (but not the latest as the error occurs due the latest version of opencv-python. install it by using:
pip install opencv-python==3.4.17.61 (You can choose your version, but this version solved the issue for me)
then enjoy your coding....
Even AUTO-COMPLETE error in opencv-python gets solved.
HAPPY CODING
I cannot get autocomplete working for OpenCV (Python) on Windows.
According to Abid's instructions here, I pasted the cv2.pyd file in the C:\Python27\Lib\site-packages.
In the Python code, I import as follows:
import cv2.cv as cv
I have also installed numpy, and it created its own folder in site-packages unlike OpenCV (which I've pasted directly into site-packages).
With this setup, the code executes without any problems, even when OpenCV methods are called.
But I have not been able to get autocomplete to work. I have tried to get it to work on Sublime Text 2 (with SublimeCodeIntel) and PyCharm. In both IDEs, autocomplete works for the numpy import, but fails for the OpenCV import.
I'm using OpenCV 2.4.6, and Python 2.7 (32 bit).
Any possible solutions?
The reason it's not working is because you're using a .pyd file, which is essentially the same as a compiled .dll. Autocomplete works by reading the source .py files, which are plain text. Try installing the OpenCV and Intel Math Kernel Library optimized NumPy packages from Christoph Gohlke's Python Extension Packages for Windows repository, which is frequently updated and a must-use resource for anyone who does any kind of scientific Python computing on Windows. Make sure you delete the cv2.pyd and numpy directories from site-packages first. These new packages will install the .py source files needed by the autocomplete engine in Sublime Text.
EDIT
OK, so I wrote the above because it worked well for a bunch of other packages. I'm a Python 3 guy, and I never installed OpenCV from Gohlke because it only has Python 2 bindings. After reading #CrazyCoder's comment below, I booted up Win7, and indeed he's absolutely correct (and I should have realized this before) - since OpenCV is written in C/C++, the only .py file included in the Gohlke package is cv.py, whose entire contents are as follows:
from cv2.cv import *
The rest is contained in cv2.pyd and a bunch of .dlls. The full OpenCV Windows distribution from opencv.org is a 291 MB download, which expands to 3 GB, and the few .py files in there are involved in building OpenCV, and aren't any good for autocomplete purposes. So, unfortunately, I don't know if there's a solution to your problem at the moment. Just keep the docs handy, and perhaps check out OpenCV Computer Vision with Python from Packt/O'Reilly, published in April 2013.
I've had the same issue with PyCharm when building a custom version of OpenCV on windows. Here is what I did to fix it:
OpenCV made a folder in Python site-packages like so:
opencv site-packages
So what you need to do is just add the python-3.9 folder to your interpreter.
File
Settings...
Python interpreter
Three dots icon next to your interpreter -> Show all...
Select your interpreter and click on the "Show paths for selected interpreter" icon
Add the folder inside the cv2 site-packages
Now import the cv2 module normally.
The best way to solve all the problems of OPENCV-PYTHON is by uninstalling it and reinstalling it.
Even I faced the same problem.
I fixed it by:
python -m pip uninstall Opencv-python
Then I reinstalled it by using a lower version. But unfortunately, I did not know the versions of opencv; So by using a small trick you can get it by running:
python -m pip install opencv-python==
and you will get an error similar to this:
ERROR: Could not find a version that satisfies the requirement opencv-python== (from versions: 3.4.0.14, 3.4.10.37, 3.4.11.39, 3.4.11.41, 3.4.11.43, 3.4.11.45, 3.4.13.47, 3.4.15.55, 3.4.16.57, 3.4.16.59, 3.4.17.61, 3.4.17.63, 4.3.0.38, 4.4.0.40, 4.4.0.42, 4.4.0.44, 4.4.0.46, 4.5.1.48, 4.5.3.56, 4.5.4.58, 4.5.4.60, 4.5.5.62, 4.5.5.64) ERROR: No matching distribution found for opencv-python==
Here you can see all the versions of opencv-python; choose any one (but not the latest as the error occurs due the latest version of opencv-python. install it by using:
pip install opencv-python==3.4.17.61 (You can choose your version, but this version solved the issue for me)
then enjoy your coding....
Even AUTO-COMPLETE error in opencv-python gets solved.
HAPPY CODING
So I have been writing a Python program that utilizes OpenCV for Windows. It's mostly just a project to learn how to use Vision-based Machine Learning. I've gotten the project working with my CPU, and while it "functions" it is abysmally slow, so I wanted to try working with the GPU version instead. Unfortunately, there isn't a python package that has OpenCV with Cuda-enabled GPU functionality (from what I could tell).
So after researching, I found that in order to do what I wanted, I had to compile the OpenCV source code with Cmake. So I set out to do so with the help of this guide which seemed to work (it compiled at least). But now i'm running into the issue of:
I don't actually know how to import this newly built package into my project's venv. I've tried moving the cv2.cp37-win_amd64.pyd into the project's venv site packages, i've tried moving the entire build folder into the project and directly importing it, but neither actually worked... so I'm a little at a loss on what to do to get OpenCV with GPU enabled CUDA working in my project.
EDIT:
I followed the guide that Miki linked, including installing Anaconda and all that jazz. The package imports correctly when I use:
Following #Miki's suggestion, I went through the guide that they linked, following all of the processes, testing that OpenCV was in fact being built correctly with:
set path=%openCvBuild%\install\x64\vc16\bin;%path%
python -c "import cv2; print(f'OpenCV: {cv2.__version__} for python installed and working')"
But it still isn't showing up in the python import in conda, despite being in the env's site-packages folder.
I am having an issue getting OpenCV to work with python. I compiled from source using CMake in order to gain access to the SIFT module. Whenever I try to use openCV however, python returns the "No module named 'cv2'" error. It works fine when I install using pip but then I have no SIFT. My build directory is set as an environment variable and my bin directory is in my system path. There were no build issues and the applications that came with the build run fine. Is there another step that I have to perform, such as installing from the compiled project using pip? How do I get my openCV library, compiled from source, to be importable by python?
The solution ended up being both simpler and sloppier than I would have liked. I just installed the regular distribution using pip install opencv-contrib-python, then went into the cv2 folder in Lib/site-packages, replaced the python extension (cv2.cp36-win32.pyd in my case. may be different for others) with the .pyd file from my CMake build (build/lib/python3/Release) and copied everything from build/bin/Release into the Lib/site-packages/cv2 folder. It doesn't look pretty or organized but python can find everything now. If anyone has a cleaner way to do this I'd love to hear it.
I am fairly new to Python and trying to install the Pillow package on Windows 7. I downloaded and ran the MS Windows installer Pillow-2.2.1.win-amd64-py3.3.exe from here. It appeared to install fine. If I run the simple line of code:
from PIL import Image
directly from the Python interpreter, it runs fine. A help() on PIL gives me the package contents.
But when I try to run the same line of code from within a script, I get an ImportError: No module named PIL. What am I missing?
(Note that I've been able to import sys and import MySQLdb from within scripts just fine.)
Resolved: sure, enough, I'm running Python 2.7 when I run scripts. (I think I vaguely recall having to install an older version so I could interface with MySQL.) Thank you all for pointing out that I should check the version being used.
For third-party modules for Windows, my go-to resource is Christoph Gohlke's Python Extension Packages for Windows. You can find the latest version of Pillow here. Make sure you're working with the python.org version of Python.
As far as your specific error, it's hard to tell exactly without a traceback, but make sure your script is calling the correct version of Python. If you have also installed Python 2.7, for example, your script may be calling that instead of 3.3.
In such cases I'm simply printing the sys.path at the beginning of the script in trouble and comparing it with the one from the working python interpreter. In most cases I was running the script with a different python interpreter.
In my case , I was referring to wrong pip folder.
Changed virtual environment in pycharm to point to right pip folder to solve this issue
import sys
print ( sys.path )