I am trying to change a some lines in a text file without affecting the other lines. This is what's inside the text file called "text.txt"
this is a test1|number1
this is a test2|number2
this is a test3|number2
this is a test4|number3
this is a test5|number3
this is a test6|number4
this is a test7|number5
this is a test8|number5
this is a test9|number5
this is a test10|number5
My objective is to change the line 4 and line 5 but keep the rest same.
mylist1=[]
for lines in open('test','r'):
a=lines.split('|')
b=a[1].strip()
if b== 'number3':
mylist1.append('{}|{} \n'.format('this is replacement','number7'))
else:
mylist1.append('{}|{} \n'.format(a[0],a[1].strip()))
myfile=open('test','w')
myfile.writelines(mylist1)
Even though the code works, I am wondering if there is any better and efficient way to do it? Is it possible to read the file just by line number?
There is not much you can improve. But you have to write all lines to a new file, either changed or unchanged. Minor improvements would be:
using the with statement;
avoiding storing lines in a list;
writing lines without formatting in the else clause (if applicable).
Applying all of the above:
import shutil
with open('test') as old, open('newtest', 'w') as new:
for line in old:
if line.rsplit('|', 1)[-1].strip() == 'number3':
new.write('this is replacement|number7\n')
else:
new.write(line)
shutil.move('newtest', 'test')
import fileinput
for lines in fileinput.input('test', inplace=True):
# inplace=True redirects stdout to a temp file which will
# be renamed to the original when we reach the end of the file. this
# is more efficient because it doesn't save the whole file into memeory
a = lines.split('|')
b = a[1].strip()
if b == 'number3':
print '{}|{} '.format('this is replacement', 'number7')
else:
print '{}|{} '.format(a[0], a[1].strip())
No. Files are byte-oriented, not line-oriented, and changing the length of a line will not advance the following bytes.
try this solution
with open('test', inplace=True) as text_file:
for line in text_file:
if line.rsplit('|', 1)[-1].strip() == 'number3':
print '{}|{} \n'.format('this is replacement', 'number7')
else:
print line
It's not wholly clear whether your intent is to identify the lines to be replaced by their value, or by their line number.
If the former is your intent,
you can get a list of lines like this:
with open('test','r') as f:
oldlines = f.read().splitlines()
If there's a danger of trailing whitespace, you could also:
Then you can process them like this:
newlines = [ line if not line.strip().endswith('|number3') else 'this is replacement|number7' for line in oldlines]
Open the destination file (I'm assuming you want to overwrite the original, here), and write all the lines:
with open('test','w') as f:
f.write("\n".join(newlines))
This is a general pattern that's useful for any kind of simple line-filtering.
If you meant to identify the lines by number, you could just alter the 'newlines' line:
newlines = [ line if i not in (3, 4) else 'this is replacement|number7' for i, line in enumerate(oldlines)]
Related
Let's say I have a text file full of nicknames. How can I delete a specific nickname from this file, using Python?
First, open the file and get all your lines from the file. Then reopen the file in write mode and write your lines back, except for the line you want to delete:
with open("yourfile.txt", "r") as f:
lines = f.readlines()
with open("yourfile.txt", "w") as f:
for line in lines:
if line.strip("\n") != "nickname_to_delete":
f.write(line)
You need to strip("\n") the newline character in the comparison because if your file doesn't end with a newline character the very last line won't either.
Solution to this problem with only a single open:
with open("target.txt", "r+") as f:
d = f.readlines()
f.seek(0)
for i in d:
if i != "line you want to remove...":
f.write(i)
f.truncate()
This solution opens the file in r/w mode ("r+") and makes use of seek to reset the f-pointer then truncate to remove everything after the last write.
The best and fastest option, rather than storing everything in a list and re-opening the file to write it, is in my opinion to re-write the file elsewhere.
with open("yourfile.txt", "r") as file_input:
with open("newfile.txt", "w") as output:
for line in file_input:
if line.strip("\n") != "nickname_to_delete":
output.write(line)
That's it! In one loop and one only you can do the same thing. It will be much faster.
This is a "fork" from #Lother's answer (which I believe that should be considered the right answer).
For a file like this:
$ cat file.txt
1: october rust
2: november rain
3: december snow
This fork from Lother's solution works fine:
#!/usr/bin/python3.4
with open("file.txt","r+") as f:
new_f = f.readlines()
f.seek(0)
for line in new_f:
if "snow" not in line:
f.write(line)
f.truncate()
Improvements:
with open, which discard the usage of f.close()
more clearer if/else for evaluating if string is not present in the current line
The issue with reading lines in first pass and making changes (deleting specific lines) in the second pass is that if you file sizes are huge, you will run out of RAM. Instead, a better approach is to read lines, one by one, and write them into a separate file, eliminating the ones you don't need. I have run this approach with files as big as 12-50 GB, and the RAM usage remains almost constant. Only CPU cycles show processing in progress.
I liked the fileinput approach as explained in this answer:
Deleting a line from a text file (python)
Say for example I have a file which has empty lines in it and I want to remove empty lines, here's how I solved it:
import fileinput
import sys
for line_number, line in enumerate(fileinput.input('file1.txt', inplace=1)):
if len(line) > 1:
sys.stdout.write(line)
Note: The empty lines in my case had length 1
If you use Linux, you can try the following approach.
Suppose you have a text file named animal.txt:
$ cat animal.txt
dog
pig
cat
monkey
elephant
Delete the first line:
>>> import subprocess
>>> subprocess.call(['sed','-i','/.*dog.*/d','animal.txt'])
then
$ cat animal.txt
pig
cat
monkey
elephant
Probably, you already got a correct answer, but here is mine.
Instead of using a list to collect unfiltered data (what readlines() method does), I use two files. One is for hold a main data, and the second is for filtering the data when you delete a specific string. Here is a code:
main_file = open('data_base.txt').read() # your main dataBase file
filter_file = open('filter_base.txt', 'w')
filter_file.write(main_file)
filter_file.close()
main_file = open('data_base.txt', 'w')
for line in open('filter_base'):
if 'your data to delete' not in line: # remove a specific string
main_file.write(line) # put all strings back to your db except deleted
else: pass
main_file.close()
Hope you will find this useful! :)
I think if you read the file into a list, then do the you can iterate over the list to look for the nickname you want to get rid of. You can do it much efficiently without creating additional files, but you'll have to write the result back to the source file.
Here's how I might do this:
import, os, csv # and other imports you need
nicknames_to_delete = ['Nick', 'Stephen', 'Mark']
I'm assuming nicknames.csv contains data like:
Nick
Maria
James
Chris
Mario
Stephen
Isabella
Ahmed
Julia
Mark
...
Then load the file into the list:
nicknames = None
with open("nicknames.csv") as sourceFile:
nicknames = sourceFile.read().splitlines()
Next, iterate over to list to match your inputs to delete:
for nick in nicknames_to_delete:
try:
if nick in nicknames:
nicknames.pop(nicknames.index(nick))
else:
print(nick + " is not found in the file")
except ValueError:
pass
Lastly, write the result back to file:
with open("nicknames.csv", "a") as nicknamesFile:
nicknamesFile.seek(0)
nicknamesFile.truncate()
nicknamesWriter = csv.writer(nicknamesFile)
for name in nicknames:
nicknamesWriter.writeRow([str(name)])
nicknamesFile.close()
In general, you can't; you have to write the whole file again (at least from the point of change to the end).
In some specific cases you can do better than this -
if all your data elements are the same length and in no specific order, and you know the offset of the one you want to get rid of, you could copy the last item over the one to be deleted and truncate the file before the last item;
or you could just overwrite the data chunk with a 'this is bad data, skip it' value or keep a 'this item has been deleted' flag in your saved data elements such that you can mark it deleted without otherwise modifying the file.
This is probably overkill for short documents (anything under 100 KB?).
I like this method using fileinput and the 'inplace' method:
import fileinput
for line in fileinput.input(fname, inplace =1):
line = line.strip()
if not 'UnwantedWord' in line:
print(line)
It's a little less wordy than the other answers and is fast enough for
Save the file lines in a list, then remove of the list the line you want to delete and write the remain lines to a new file
with open("file_name.txt", "r") as f:
lines = f.readlines()
lines.remove("Line you want to delete\n")
with open("new_file.txt", "w") as new_f:
for line in lines:
new_f.write(line)
here's some other method to remove a/some line(s) from a file:
src_file = zzzz.txt
f = open(src_file, "r")
contents = f.readlines()
f.close()
contents.pop(idx) # remove the line item from list, by line number, starts from 0
f = open(src_file, "w")
contents = "".join(contents)
f.write(contents)
f.close()
You can use the re library
Assuming that you are able to load your full txt-file. You then define a list of unwanted nicknames and then substitute them with an empty string "".
# Delete unwanted characters
import re
# Read, then decode for py2 compat.
path_to_file = 'data/nicknames.txt'
text = open(path_to_file, 'rb').read().decode(encoding='utf-8')
# Define unwanted nicknames and substitute them
unwanted_nickname_list = ['SourDough']
text = re.sub("|".join(unwanted_nickname_list), "", text)
Do you want to remove a specific line from file so use this snippet short and simple code you can easily remove any line with sentence or prefix(Symbol).
with open("file_name.txt", "r") as f:
lines = f.readlines()
with open("new_file.txt", "w") as new_f:
for line in lines:
if not line.startswith("write any sentence or symbol to remove line"):
new_f.write(line)
To delete a specific line of a file by its line number:
Replace variables filename and line_to_delete with the name of your file and the line number you want to delete.
filename = 'foo.txt'
line_to_delete = 3
initial_line = 1
file_lines = {}
with open(filename) as f:
content = f.readlines()
for line in content:
file_lines[initial_line] = line.strip()
initial_line += 1
f = open(filename, "w")
for line_number, line_content in file_lines.items():
if line_number != line_to_delete:
f.write('{}\n'.format(line_content))
f.close()
print('Deleted line: {}'.format(line_to_delete))
Example output:
Deleted line: 3
Take the contents of the file, split it by newline into a tuple. Then, access your tuple's line number, join your result tuple, and overwrite to the file.
Let's say I have a text file full of nicknames. How can I delete a specific nickname from this file, using Python?
First, open the file and get all your lines from the file. Then reopen the file in write mode and write your lines back, except for the line you want to delete:
with open("yourfile.txt", "r") as f:
lines = f.readlines()
with open("yourfile.txt", "w") as f:
for line in lines:
if line.strip("\n") != "nickname_to_delete":
f.write(line)
You need to strip("\n") the newline character in the comparison because if your file doesn't end with a newline character the very last line won't either.
Solution to this problem with only a single open:
with open("target.txt", "r+") as f:
d = f.readlines()
f.seek(0)
for i in d:
if i != "line you want to remove...":
f.write(i)
f.truncate()
This solution opens the file in r/w mode ("r+") and makes use of seek to reset the f-pointer then truncate to remove everything after the last write.
The best and fastest option, rather than storing everything in a list and re-opening the file to write it, is in my opinion to re-write the file elsewhere.
with open("yourfile.txt", "r") as file_input:
with open("newfile.txt", "w") as output:
for line in file_input:
if line.strip("\n") != "nickname_to_delete":
output.write(line)
That's it! In one loop and one only you can do the same thing. It will be much faster.
This is a "fork" from #Lother's answer (which I believe that should be considered the right answer).
For a file like this:
$ cat file.txt
1: october rust
2: november rain
3: december snow
This fork from Lother's solution works fine:
#!/usr/bin/python3.4
with open("file.txt","r+") as f:
new_f = f.readlines()
f.seek(0)
for line in new_f:
if "snow" not in line:
f.write(line)
f.truncate()
Improvements:
with open, which discard the usage of f.close()
more clearer if/else for evaluating if string is not present in the current line
The issue with reading lines in first pass and making changes (deleting specific lines) in the second pass is that if you file sizes are huge, you will run out of RAM. Instead, a better approach is to read lines, one by one, and write them into a separate file, eliminating the ones you don't need. I have run this approach with files as big as 12-50 GB, and the RAM usage remains almost constant. Only CPU cycles show processing in progress.
I liked the fileinput approach as explained in this answer:
Deleting a line from a text file (python)
Say for example I have a file which has empty lines in it and I want to remove empty lines, here's how I solved it:
import fileinput
import sys
for line_number, line in enumerate(fileinput.input('file1.txt', inplace=1)):
if len(line) > 1:
sys.stdout.write(line)
Note: The empty lines in my case had length 1
If you use Linux, you can try the following approach.
Suppose you have a text file named animal.txt:
$ cat animal.txt
dog
pig
cat
monkey
elephant
Delete the first line:
>>> import subprocess
>>> subprocess.call(['sed','-i','/.*dog.*/d','animal.txt'])
then
$ cat animal.txt
pig
cat
monkey
elephant
Probably, you already got a correct answer, but here is mine.
Instead of using a list to collect unfiltered data (what readlines() method does), I use two files. One is for hold a main data, and the second is for filtering the data when you delete a specific string. Here is a code:
main_file = open('data_base.txt').read() # your main dataBase file
filter_file = open('filter_base.txt', 'w')
filter_file.write(main_file)
filter_file.close()
main_file = open('data_base.txt', 'w')
for line in open('filter_base'):
if 'your data to delete' not in line: # remove a specific string
main_file.write(line) # put all strings back to your db except deleted
else: pass
main_file.close()
Hope you will find this useful! :)
I think if you read the file into a list, then do the you can iterate over the list to look for the nickname you want to get rid of. You can do it much efficiently without creating additional files, but you'll have to write the result back to the source file.
Here's how I might do this:
import, os, csv # and other imports you need
nicknames_to_delete = ['Nick', 'Stephen', 'Mark']
I'm assuming nicknames.csv contains data like:
Nick
Maria
James
Chris
Mario
Stephen
Isabella
Ahmed
Julia
Mark
...
Then load the file into the list:
nicknames = None
with open("nicknames.csv") as sourceFile:
nicknames = sourceFile.read().splitlines()
Next, iterate over to list to match your inputs to delete:
for nick in nicknames_to_delete:
try:
if nick in nicknames:
nicknames.pop(nicknames.index(nick))
else:
print(nick + " is not found in the file")
except ValueError:
pass
Lastly, write the result back to file:
with open("nicknames.csv", "a") as nicknamesFile:
nicknamesFile.seek(0)
nicknamesFile.truncate()
nicknamesWriter = csv.writer(nicknamesFile)
for name in nicknames:
nicknamesWriter.writeRow([str(name)])
nicknamesFile.close()
In general, you can't; you have to write the whole file again (at least from the point of change to the end).
In some specific cases you can do better than this -
if all your data elements are the same length and in no specific order, and you know the offset of the one you want to get rid of, you could copy the last item over the one to be deleted and truncate the file before the last item;
or you could just overwrite the data chunk with a 'this is bad data, skip it' value or keep a 'this item has been deleted' flag in your saved data elements such that you can mark it deleted without otherwise modifying the file.
This is probably overkill for short documents (anything under 100 KB?).
I like this method using fileinput and the 'inplace' method:
import fileinput
for line in fileinput.input(fname, inplace =1):
line = line.strip()
if not 'UnwantedWord' in line:
print(line)
It's a little less wordy than the other answers and is fast enough for
Save the file lines in a list, then remove of the list the line you want to delete and write the remain lines to a new file
with open("file_name.txt", "r") as f:
lines = f.readlines()
lines.remove("Line you want to delete\n")
with open("new_file.txt", "w") as new_f:
for line in lines:
new_f.write(line)
here's some other method to remove a/some line(s) from a file:
src_file = zzzz.txt
f = open(src_file, "r")
contents = f.readlines()
f.close()
contents.pop(idx) # remove the line item from list, by line number, starts from 0
f = open(src_file, "w")
contents = "".join(contents)
f.write(contents)
f.close()
You can use the re library
Assuming that you are able to load your full txt-file. You then define a list of unwanted nicknames and then substitute them with an empty string "".
# Delete unwanted characters
import re
# Read, then decode for py2 compat.
path_to_file = 'data/nicknames.txt'
text = open(path_to_file, 'rb').read().decode(encoding='utf-8')
# Define unwanted nicknames and substitute them
unwanted_nickname_list = ['SourDough']
text = re.sub("|".join(unwanted_nickname_list), "", text)
Do you want to remove a specific line from file so use this snippet short and simple code you can easily remove any line with sentence or prefix(Symbol).
with open("file_name.txt", "r") as f:
lines = f.readlines()
with open("new_file.txt", "w") as new_f:
for line in lines:
if not line.startswith("write any sentence or symbol to remove line"):
new_f.write(line)
To delete a specific line of a file by its line number:
Replace variables filename and line_to_delete with the name of your file and the line number you want to delete.
filename = 'foo.txt'
line_to_delete = 3
initial_line = 1
file_lines = {}
with open(filename) as f:
content = f.readlines()
for line in content:
file_lines[initial_line] = line.strip()
initial_line += 1
f = open(filename, "w")
for line_number, line_content in file_lines.items():
if line_number != line_to_delete:
f.write('{}\n'.format(line_content))
f.close()
print('Deleted line: {}'.format(line_to_delete))
Example output:
Deleted line: 3
Take the contents of the file, split it by newline into a tuple. Then, access your tuple's line number, join your result tuple, and overwrite to the file.
I have a file that I need to write certain contents to a new file.
The current contents is as follows:
send from #1373846594 to pool/10.0.68.61#1374451276 estimated size is 7.83G
send from #1374451276 to pool/10.0.68.61#1375056084 estimated size is 10.0G
I need the new file to show:
#1373846594 --> pool/10.0.68.61#1374451276 --> 7.83G
#1374451276 --> pool/10.0.68.61#1375056084 --> 10.0G
I have tried:
with open("file", "r") as drun:
for _,_,snap,_,pool_,_,_,size in zip(*[iter(drun)]*9):
drun.write("{0}\t{1}\t{2}".format(snap,pool,size))
I know I am either way off or just not quite there but I am not sure where to go next with this. Any help would be appreciated.
You want to split your lines using str.split(), and you'll need to write to another file first, then move that back into place; reading and writing to the same file is tricky and should be avoided unless you are working with fixed record sizes.
However, the fileinput module makes in-place file editing easy enough:
import fileinput
for line in fileinput.input(filename, inplace=True):
components = line.split()
snap, pool, size = components[2], components[4], components[-1]
print '\t'.join((snap,pool,size))
The print statement writes to sys.stdout, which fileinput conveniently redirects when inplace=True is set. This means you are writing to the output file (that replaces the original input file), writing a bonus newline on every loop too.
inf = open(file)
outf = open(outfile,'w')
for line in inf:
parts = line.split()
outf.write("{0}-->{1}-->{2}".format(parts[2], parts[4], parts[8]))
inf.close()
outf.close()
Perhaps something simple using a regex pattern match:
with open('output_file', 'w') as outFile:
for line in open('input_file'):
line = line.split()
our_patterns = [i for i in line if re.search('^#', i) or \
re.search('^pool', i) or \
re.search('G$', i)]
outFile.write(' --> '.join(our_patterns) + '\n')
The pattern matching will extract any parts that begin with # or pool, as well as the final size that ends with G. These parts are then joined with the --> and written to file. Hope this helps
SOURCE, DESTINATION, SIZE = 2, 4, 8
with open('file.txt') as drun:
for line in drun:
pieces = line.split()
print(pieces[SOURCE], pieces[DESTINATION], pieces[SIZE], sep=' --> ', file=open('log.txt', 'a'))
I just started learning python 3 weeks ago, I apologize if this is really basic. I needed to open a .txt file and print the length of the longest line of code in the file. I just made a random file named it myfile and saved it to my desktop.
myfile= open('myfile', 'r')
line= myfile.readlines()
len(max(line))-1
#the (the "-1" is to remove the /n)
Is this code correct? I put it in interpreter and it seemed to work OK.
But I got it wrong because apparently I was supposed to use a while loop. Now I am trying to figure out how to put it in a while loop. I've read what it says on python.org, watched videos on youtube and looked through this site. I just am not getting it. The example to follow that was given is this:
import os
du=os.popen('du/urs/local')
while 1:
line= du.readline()
if not line:
break
if list(line).count('/')==3:
print line,
print max([len(line) for line in file(filename).readlines()])
Taking what you have and stripping out the parts you don't need
myfile = open('myfile', 'r')
max_len = 0
while 1:
line = myfile.readline()
if not line:
break
if len(line) # ... somethin
# something
Note that this is a crappy way to loop over a file. It relys on the file having an empty line at the end. But homework is homework...
max(['b','aaa']) is 'b'
This lexicographic order isn't what you want to maximise, you can use the key flag to choose a different function to maximise, like len.
max(['b','aaa'], key=len) is 'aaa'
So the solution could be: len ( max(['b','aaa'], key=len) is 'aaa' ).
A more elegant solution would be to use list comprehension:
max ( len(line)-1 for line in myfile.readlines() )
.
As an aside you should enclose opening a file using a with statement, this will worry about closing the file after the indentation block:
with open('myfile', 'r') as mf:
print max ( len(line)-1 for line in mf.readlines() )
As other's have mentioned, you need to find the line with the maximum length, which mean giving the max() function a key= argument to extract that from each of lines in the list you pass it.
Likewise, in a while loop you'd need to read each line and see if its length was greater that the longest one you had seen so far, which you could store in a separate variable and initialize to 0 before the loop.
BTW, you would not want to open the file with os.popen() as shown in your second example.
I think it will be easier to understand if we keep it simple:
max_len = -1 # Nothing was read so far
with open("filename.txt", "r") as f: # Opens the file and magically closes at the end
for line in f:
max_len = max(max_len, len(line))
print max_len
As this is homework... I would ask myself if I should count the line feed character or not. If you need to chop the last char, change len(line) by len(line[:-1]).
If you have to use while, try this:
max_len = -1 # Nothing was read
with open("t.txt", "r") as f: # Opens the file
while True:
line = f.readline()
if(len(line)==0):
break
max_len = max(max_len, len(line[:-1]))
print max_len
For those still in need. This is a little function which does what you need:
def get_longest_line(filename):
length_lines_list = []
open_file_name = open(filename, "r")
all_text = open_file_name.readlines()
for line in all_text:
length_lines_list.append(len(line))
max_length_line = max(length_lines_list)
for line in all_text:
if len(line) == max_length_line:
return line.strip()
open_file_name.close()
I am working with a very large (~11GB) text file on a Linux system. I am running it through a program which is checking the file for errors. Once an error is found, I need to either fix the line or remove the line entirely. And then repeat...
Eventually once I'm comfortable with the process, I'll automate it entirely. For now however, let's assume I'm running this by hand.
What would be the fastest (in terms of execution time) way to remove a specific line from this large file? I thought of doing it in Python...but would be open to other examples. The line might be anywhere in the file.
If Python, assume the following interface:
def removeLine(filename, lineno):
Thanks,
-aj
You can have two file objects for the same file at the same time (one for reading, one for writing):
def removeLine(filename, lineno):
fro = open(filename, "rb")
current_line = 0
while current_line < lineno:
fro.readline()
current_line += 1
seekpoint = fro.tell()
frw = open(filename, "r+b")
frw.seek(seekpoint, 0)
# read the line we want to discard
fro.readline()
# now move the rest of the lines in the file
# one line back
chars = fro.readline()
while chars:
frw.writelines(chars)
chars = fro.readline()
fro.close()
frw.truncate()
frw.close()
Modify the file in place, offending line is replaced with spaces so the remainder of the file does not need to be shuffled around on disk. You can also "fix" the line in place if the fix is not longer than the line you are replacing
import os
from mmap import mmap
def removeLine(filename, lineno):
f=os.open(filename, os.O_RDWR)
m=mmap(f,0)
p=0
for i in range(lineno-1):
p=m.find('\n',p)+1
q=m.find('\n',p)
m[p:q] = ' '*(q-p)
os.close(f)
If the other program can be changed to output the fileoffset instead of the line number, you can assign the offset to p directly and do without the for loop
As far as I know, you can't just open a txt file with python and remove a line. You have to make a new file and move everything but that line to it. If you know the specific line, then you would do something like this:
f = open('in.txt')
fo = open('out.txt','w')
ind = 1
for line in f:
if ind != linenumtoremove:
fo.write(line)
ind += 1
f.close()
fo.close()
You could of course check the contents of the line instead to determine if you want to keep it or not. I also recommend that if you have a whole list of lines to be removed/changed to do all those changes in one pass through the file.
If the lines are variable length then I don't believe that there is a better algorithm than reading the file line by line and writing out all lines, except for the one(s) that you do not want.
You can identify these lines by checking some criteria, or by keeping a running tally of lines read and suppressing the writing of the line(s) that you do not want.
If the lines are fixed length and you want to delete specific line numbers, then you may be able to use seek to move the file pointer... I doubt you're that lucky though.
Update: solution using sed as requested by poster in comment.
To delete for example the second line of file:
sed '2d' input.txt
Use the -i switch to edit in place. Warning: this is a destructive operation. Read the help for this command for information on how to make a backup automatically.
def removeLine(filename, lineno):
in = open(filename)
out = open(filename + ".new", "w")
for i, l in enumerate(in, 1):
if i != lineno:
out.write(l)
in.close()
out.close()
os.rename(filename + ".new", filename)
I think there was a somewhat similar if not exactly the same type of question asked here. Reading (and writing) line by line is slow, but you can read a bigger chunk into memory at once, go through that line by line skipping lines you don't want, then writing this as a single chunk to a new file. Repeat until done. Finally replace the original file with the new file.
The thing to watch out for is when you read in a chunk, you need to deal with the last, potentially partial line you read, and prepend that into the next chunk you read.
#OP, if you can use awk, eg assuming line number is 10
$ awk 'NR!=10' file > newfile
I will provide two alternatives based on the look-up factor (line number or a search string):
Line number
def removeLine2(filename, lineNumber):
with open(filename, 'r+') as outputFile:
with open(filename, 'r') as inputFile:
currentLineNumber = 0
while currentLineNumber < lineNumber:
inputFile.readline()
currentLineNumber += 1
seekPosition = inputFile.tell()
outputFile.seek(seekPosition, 0)
inputFile.readline()
currentLine = inputFile.readline()
while currentLine:
outputFile.writelines(currentLine)
currentLine = inputFile.readline()
outputFile.truncate()
String
def removeLine(filename, key):
with open(filename, 'r+') as outputFile:
with open(filename, 'r') as inputFile:
seekPosition = 0
currentLine = inputFile.readline()
while not currentLine.strip().startswith('"%s"' % key):
seekPosition = inputFile.tell()
currentLine = inputFile.readline()
outputFile.seek(seekPosition, 0)
currentLine = inputFile.readline()
while currentLine:
outputFile.writelines(currentLine)
currentLine = inputFile.readline()
outputFile.truncate()