I have a plain python (non-Django) project where I'm trying to tie Raven into the logging setup.
Under our current setup, we use a simple logging config:
import logging
logging.basicConfig(format='long detailed format',
level=logging.DEBUG)
The output is then redirected to a log file; this produces a nice, verbose log that we can look through when we need to.
We now want to add Raven's error logging, tying it into our current logging setup so that logging.error calls also result in a message being sent to the Sentry server. Using the following code:
from raven import Client
from raven.conf import setup_logging
from raven.handlers.logging import SentryHandler
raven = Client(environ.get('SENTRYURL', ''), site='SITE')
setup_logging(SentryHandler(raven, level=logging.ERROR))
Errors are being successfully sent to Sentry, but I'm now getting only a single line of file output:
DEBUG: Configuring Raven for host: <DSN url>
All other file output -- from logging.debug to logging.error -- is being suppressed.
If I comment the setup_logging line, I get file output but no Sentry errors. What am I doing wrong?
This turned out to be a case of sloppy code. We had some hack elsewhere in the startup execution path that re-initialized the logging:
logging.root.removeHandler(logging.root.handlers[0]) # Undo previous basicConfig
logging.basicConfig(format='same long format',
level=logging.DEBUG)
However, since logging.basicConfig doesn't do anything if logging.root has existing handlers, this simply removed the stream handler, leaving the sentry handler, and caused basicConfig to then act as no-op, meaning we lost our StreamHandler altogether.
Removing these lines and having only one basicConfig and a setup_logging call worked.
Related
I have this python code:
import logging
LOGGER = logging.getLogger(__name__)
LOGGER.info('test')
It does not get written to the console, so where does this get logged?
This does not get logged anywhere, because you did not configure any logging handlers. Without a handler configured, the log event goes nowhere. When there are no handlers configured, the root logger gets a handler automatically added if an event at WARNING or above is seen, but your event was just at INFO level.
If you put a line like this before, then you will see it logged to terminal:
logging.basicConfig(level=logging.INFO)
Basic config will add a StreamHandler writing to sys.stderr if you don't specify otherwise.
I have a tornado application and a custom logger method. My code to build and use the custom logger is the following:
def create_logger():
"""
This function creates the logger functionality to be used throughout the Python application
:return: bool - true if successful
"""
# Configuring the logger
filename = "PythonLogger.log"
# Change the current working directory to the logs folder, so that the logs files is written in it.
os.chdir(os.path.normpath(os.path.normpath(os.path.dirname(os.path.abspath(__file__)) + os.sep + os.pardir + os.sep + os.pardir + os.sep + 'logs')))
# Create the logs file
logging.basicConfig(filename=filename, format='%(asctime)s %(message)s', filemode='w')
# Creating the logger
logger = logging.getLogger()
# Setting the threshold of logger to DEBUG
logger.setLevel(logging.NOTSET)
logger.log(0, 'El logger está inicializado')
return True
def log_info_message(msg):
"""
Utility for message logging with code 20
:param msg:
:return:
"""
return logging.getLogger().log(20, msg)
In the code, I initialize the logger and already write a message to it before the Tornado application initialization:
if __name__ == '__main__':
# Logger initialization
create_logger()
# First log message
log_info_message('Initiating Python application')
# Starting Tornado
tornado.options.parse_command_line()
# Specifying what app exactly is being started
server = tornado.httpserver.HTTPServer(test.app)
server.listen(options.port)
try:
if 'Windows_NT' not in os.environ.values():
server.start(0)
tornado.ioloop.IOLoop.instance().start()
except KeyboardInterrupt:
tornado.ioloop.IOLoop.instance().stop()
Then let's say my method get of HTTP request is as follows (only interesting lines):
class API(tornado.web.RequestHandler):
def get(self):
self.write('Get request ')
logging.getLogger("tornado.access").log(20, 'Hola')
logging.getLogger("tornado.application").log(20, '1')
logging.getLogger("tornado.general").log(20, '2')
log_info_message('Received a GET request at: ' + datetime.datetime.now().strftime("%d-%b-%Y (%H:%M:%S.%f)"))
What I see is a difference between local testing and testing on server.
A) On local, I can see log message at first script running, and log messages of requests (after initializing Tornado app) in my log file and the Tornado logs.
B) On server, I only see the first message, not my log messages when Get requests are accepted and also see Tornado's loggers when there's an error, but even don't see the messages produced by Tornado's loggers. I guess that means that somehow Tornado is re-initializing the logger and making mine and his 3 ones write in some other file (somehow that does not affect when errors happens??).
I am aware that Tornado uses its own 3 logging functions, but somehow I would like to use mine as well, at the same time as keeping the Tornado's ones and writing them all into the same file. Basically reproduce that local behaviour on server but also keeping it when some error happens, of course.
How could I achieve this?
Thanks in advance!
P.S.: if I add a name to the logger, let's say logging.getLogger('Example') and changed log_info_message function to return logging.getLogger('Example').log(20, msg), Tornado's logger would fail and raise error. So that option destroys its own loggers...
It seems the only problem was that, on the server side, tornado was setting the the mininum level for a log message to be written on log file higher (minimum of 40 was required). So that logging.getLogger().log(20, msg) would not write on the logging file but logging.getLogger().log(40, msg) would.
I would like to understand why, so if anybody knows, your knowledge would be more than welcome. For the time being that solution is working though.
tornado.log defines options that can be used to customise logging via command line (check tornado.options) - one of them is logging that defines the log level used. You are likely using this on the server and setting it to error.
When debugging logging I suggest you create a RequestHandler that will log or return the structure of the existing loggers by inspecting the root logger. When you see the structure it is much easier to understand why it works the way it works.
I am trying to add logging to a medium size Python project with minimal disruption. I would like to log from multiple modules to rotating files silently (without printing messages to the terminal). I have tried to modify this example and I almost have the functionality I need except for one issue.
Here is how I am attempting to configure things in my main script:
import logging
import logging.handlers
import my_module
LOG_FILE = 'logs\\logging_example_new.out'
#logging.basicConfig(level=logging.DEBUG)
# Define a Handler which writes messages to rotating log files.
handler = logging.handlers.RotatingFileHandler(LOG_FILE, maxBytes=100000, backupCount=1)
handler.setLevel(logging.DEBUG) # Set logging level.
# Create message formatter.
formatter = logging.Formatter('%(asctime)s %(name)-12s %(levelname)-8s %(message)s')
# Tell the handler to use this format
handler.setFormatter(formatter)
# Add the handler to the root logger
logging.getLogger('').addHandler(handler)
# Now, we can log to the root logger, or any other logger. First the root...
logging.debug('Root debug message.')
logging.info('Root info message.')
logging.warning('Root warning message.')
logging.error('Root error message.')
logging.critical('Root critical message.')
# Use a Logger in another module.
my_module.do_something() # Call function which logs a message.
Here is a sample of what I am trying to do in modules:
import logging
def do_something():
logger = logging.getLogger(__name__)
logger.debug('Module debug message.')
logger.info('Module info message.')
logger.warning('Module warning message.')
logger.error('Module error message.')
logger.critical('Module critical message.')
Now, here is my problem. I currently get the messages logged into rotating files silently. But I only get warning, error, and critical messages. Despite setting handler.setLevel(logging.DEBUG).
If I uncomment logging.basicConfig(level=logging.DEBUG), then I get all the messages in the log files but I also get the messages printed to the terminal.
How do I get all messages above the specified threshold to my log files without outputing them to the terminal?
Thanks!
Update:
Based on this answer, it appears that calling logging.basicConfig(level=logging.DEBUG) automatically adds a StreamHandler to the Root logger and you can remove it. When I did remove it leaving only my RotatingFileHandler, messages no longer printed to the terminal. I am still wondering why I have to use logging.basicConfig(level=logging.DEBUG) to set the message level threshold, when I am setting handler.setLevel(logging.DEBUG). If anyone can shed a little more light on these issues it would still be appreciated.
You need to call set the logging level on the logger itself as well. I believe by default, the logging level on the logger is logging.WARNING
Ex.
root_logger = logging.getLogger('')
root_logger.setLevel(logging.DEBUG)
# Add the handler to the root logger
root_logger.addHandler(handler)
The loggers log level determines what the logger will actually log (i.e what messages will actually get handed to the handlers). The handlers log level determines what it will actually handle (i.e. what messages actually are output to file, stream, etc). So you could potentially have multiple handlers attached to a logger each handling a different log level.
Here's an SO answer that explains the way this works
I can only see warning and error, how can I get info and debug printed out? To clarify, I am starting the tornado app with python app.py. I want the info and debug logs to print out to the console after I run the app.
class MainHandler(tornado.web.RequestHandler):
def get(self):
self.write('hello fun fun test world from tornado super')
logging.info('info')
logging.warning('warning')
logging.error('error')
logging.debug('debug')
application = tornado.web.Application([(r"/", MainHandler)], debug=True)
You probably need to change the level of the logging module to allow for debug and info messages to be displayed in the console.
logger.setLevel(logging.DEBUG) # this should allow all messages to be displayed
if you don't want to display debug messages then do this:
logger.setLevel(logging.INFO)
And just a quick fyi. Here are the levels in order, so if you set one of them it will display any messages of the types below the set level and it will NOT any messages above the set level.
logging.DEBUG
logging.INFO
logging.WARNING
logging.ERROR
logging.CRITICAL
By calling tornado.options.parse_command_line you register tornado command line flags.
You can use logging command line flag to change logging level from command line.
For more information: https://stackoverflow.com/a/14269208/63097
python helloworld.py --logging=debug
helloworld.py is tornado offical demo
more details about tornado/options.py
Here's the trick: you can directly modify tornados internal access logger:
import logging
import tornado
import tornado.log
tornado.log.access_log.setLevel(logging.DEBUG)
I have a pretty weird problem with my logging facility i use inside django/python. The logging is not working anymore since i upgraded to django 1.3. It seems to be related to the logging level and the 'debug=' setting in the settings.py file.
1) When i log INFO messages and debug=False, the logging won't happen, my file doesn't get appended.
2) When i log WARNING messages and debug=False, the logging works perfectly like i want it to, the file gets appended
3) When i log INFO messages and debug=True, the logging seems to work, the file get appended.
How could i log INFO messages with debug=False? It worked before django 1.3... is there somewhere a mysterious setting which do the trick? Underneath there is a sample code:
views.py:
import logging
logging.basicConfig(level=logging.INFO,
format='%(asctime)s %(levelname)s %(message)s',
filename='/opt/general.log',
filemode='a')
def create_log_file(filename, log_name, level=logging.INFO):
handler = logging.handlers.TimedRotatingFileHandler(filename, 'midnight', 7, backupCount=10)
handler.setLevel(level)
formatter = logging.Formatter('%(asctime)s %(name)-12s %(levelname)-8s %(message)s', '%a, %Y-%m-%d %H:%M:%S')
handler.setFormatter(formatter)
logging.getLogger(log_name).addHandler(handler)
create_log_file('/opt/test.log', 'testlog')
logger_test = logging.getLogger('testlog')
logger_test.info('testing the logging functionality')
With this code the logging does not work in Django 1.3 with debug set to False in the settings.py file. When i should do like this:
logger_test.warning('testing the logging functionality')
This works perfectly when debug is set to False. The levels DEBUG and INFO aint logging but WARNING,ERROR and CRITICAL are doing their job...
Does anyone have an idea?
Since Django 1.3 contains its own logging configuration, you need to ensure that anything you're doing doesn't clash with it. For example, if the root logger has handlers already configured by Django by the time your module first gets imported, your basicConfig() call won't have any effect.
What you're describing is the normal logging situation - WARNINGs and above get handled, while INFO and DEBUG are suppressed by default. It looks as if your basicConfig() is not having any effect; You should consider replacing your basicConfig() call with the appropriate logging configuration in settings.py, or at least investigate the root logging level and what handlers are attached to it, at the time of your basicConfig() call.