I am trying to install paho-mqtt package for my python project. But it gives the error
Error: Python packaging tool 'pip' not found.
I am using ubuntu 16.04 and I am running this command
pip install paho-mqtt
Can anyone tell me is there another way to install this?
Install pip first, if using python2
sudo apt-get install python-pip
or for python3
sudo apt-get install python3-pip
Python uses pip to install various Python modules like request, jsonpickel etc.
So you need to install pip first as said by #Asoul
I'm trying to install h5py, but when I do pip install h5py or use python setup.py install from the source code, fatal error:
hdf5.h: No such file or directory.
Other posts mention to do pip install libhdf5-dev or pip install libhdf5-serial-dev to resolve this, but it says "no matching distribution found."
How can I install h5py? I am ssh'd into an Odyssey computer using the CentOS 6.5 version of the Linux. Also, I do not have sudo privileges. Thanks!
Your error is because you are missing the hdf5.h header, pip will not install the development headers, you need to install them using your package manager, on Centos it would be:
yum install hdf5-devel
If you look at the installation instrcutions:
Source installation on Linux and OS X
You need, via apt-get, yum or Homebrew:
Python 2.6, 2.7, 3.3, or 3.4 with development headers (python-dev or similar)
HDF5 1.8.4 or newer, shared library version with development headers (libhdf5-dev or similar)
NumPy 1.6.1 or later
This link helped:
https://github.com/Homebrew/legacy-homebrew/issues/23144
I installed LinuxHomeBrew and did:
brew tap homebrew/science
brew install hdf5
pip install h5py
I was able to install h5py!
sudo apt-get update
sudo apt-get install python-h5py
(Source)
Also, not pip install libhdf5-dev or pip install libhdf5-serial-dev, but apt install libhdf5-dev and apt install libhdf5-serial-dev.
Then, run pip install h5py
Running the below fixed my problem as I had an error related to xlocale.h
sudo ln -s /usr/include/locale.h /usr/include/xlocale.h
Just started Python a few days ago and I'm using PyCharm to develop a web application with Django. I have libpq-dev python-dev packages already installed, but it's still throwing me the same error:
./psycopg/psycopg.h:30:20: fatal error: Python.h: No such file or directory
which according to Google is the issue that occurs when python-dev package isn't installed. Note that I'm running the install from within the PyCharm interface for a virtualenv that I created for 3.2 and 3.3 (not sure how to run it from the terminal). Installing outside of the virtualenv still throws the same error, even when I install it from the terminal with setup.py. If I run pip install psycopg2 from the terminal, it succeeds, but it installs for Python 2.7. According to their website, they have support for up to Python 3.2.
On Ubuntu you just run this:
sudo apt-get install python3-psycopg2
Just run this using the terminal:
$ sudo apt-get install python3-dev
This way, you could use gcc to build the module you're trying to use.
Another option that seems to provide a newer version of psycopg2 than the one in the python3-psycopg2 package (at least when I wrote this):
sudo apt-get install pip3
sudo apt-get install libpq-dev
sudo pip3 install psycopg2
For most operating systems, the quickest way to install Psycopg is using the wheel package available on PyPI:
$ pip install psycopg2-binary
Check:
$ pip freeze | grep -i psycopg2
psycopg2-binary==2.9.3
This will install a pre-compiled binary version of the module which does not require the build or runtime prerequisites.
Or:
$ sudo apt-get install libpq-dev
$ pip install psycopg2
Check:
$ pip freeze | grep -i psycopg2
psycopg2==2.9.3
More info about psycopg vs psycopg-binary.
When I run the following command:
sudo pip install python-ldap
I get this error:
In file included from Modules/LDAPObject.c:9:
Modules/errors.h:8: fatal error: lber.h: No such file or directory
Any ideas how to fix this?
The python-ldap is based on OpenLDAP, so you need to have the development files (headers) in order to compile the Python module. If you're on Ubuntu, the package is called libldap2-dev.
Debian/Ubuntu:
sudo apt-get install libsasl2-dev python-dev libldap2-dev libssl-dev
RedHat/CentOS:
sudo yum install python-devel openldap-devel
To install python-ldap successfully with pip, following development libraries are needed (package names taken from ubuntu environment):
sudo apt-get install -y python-dev libldap2-dev libsasl2-dev libssl-dev
On CentOS/RHEL 6, you need to install:
sudo yum install python-devel
sudo yum install openldap-devel
and yum will also install cyrus-sasl-devel as a dependency. Then you can run:
pip-2.7 install python-ldap
"Don't blindly remove/install software"
In a Ubuntu or Debian based distro, you can use apt-file to find the name of the exact package that includes the missing header file.
# do this once
sudo apt-get install apt-file
sudo apt-file update
$ apt-file search lber.h
libldap2-dev: /usr/include/lber.h
As you could see from the output of apt-file search lber.h, you'd just need to install the package libldap2-dev.
sudo apt-get install libldap2-dev
In Ubuntu it looks like this :
$ sudo apt-get install python-dev libldap2-dev libsasl2-dev libssl-dev
$ sudo pip install python-ldap
Windows: I completely agree with the accepted answer, but digging through the comments took a while to get to the meat of what I needed. I ran across this specific problem with Reviewboard on Windows using the Bitnami. To give an answer for windows then, I used this link mentioned in the comments:
http://www.lfd.uci.edu/~gohlke/pythonlibs/#python-ldap
placed that wheel (whl file) into my reviewboard install directory
Then, executed the following commands
easy_install pip
pip install python_ldap-2.4.20-cp27-none_win32.whl
(because I had python 2.7 and a 32bit install at that)
easy_install python-ldap
For those having the same issue of missing Iber.h on Alpine Linux, in a docker image that you are trying to adapt to Alpine for instance.
The package you are looking for is: openldap-dev
So run
apk add openldap-dev
Available from version 3.3 up to Edge
Available for both armhf and x86_64 Architectures.
On Fedora 22, you need to do this instead:
sudo dnf install python-devel
sudo dnf install openldap-devel
On openSUSE you need to install the packages openldap2-devel, cyrus-sasl-devel, python-devel and libopenssl-devel.
zypper install openldap2-devel cyrus-sasl-devel python-devel libopenssl-devel
python3 does not support python-ldap. Rather to install ldap3.
For alpine docker
apk add openldap-dev
if the python version is 3 and above try
pip install python3-ldap
I had problems with the installation on Windows, so one of the solutions is to install the ldap package manually.
A few steps:
Go to the page pyldap or/and python-ldap and download the latest version *whl.
Open a console then cd to where you've downloaded your file like some-package.whl and use:
pip install some-package.whl
The current version for pyldap is 2.4.45. On a concrete example the installation would be:
pip install .\pyldap-2.4.45-cp37-cp37m-win_amd64.whl
# or
pip install .\python_ldap‑3.3.1‑cp39‑cp39‑win_amd64.whl
Output:
Installing collected packages: pyldap
Successfully installed pyldap-2.4.45
EDIT
You can install the proper version for Python-3.X though using following command:
# if pip3 is the default pip alias for python-3
pip3 install python3-ldap
# otherwise
pip install python3-ldap
Also here is the link of PiPy package for further information: python3-ldap 0.9.8.4
OR
ldap3 is a strictly RFC 4510 conforming LDAP V3 pure Python client library. The same codebase runs in Python 2, Python 3, PyPy and PyPy3: https://github.com/cannatag/ldap3
pip install ldap3
from ldap3 import Server, Connection, SAFE_SYNC
server = Server('my_server')
conn = Connection(server, 'my_user', 'my_password', client_strategy=SAFE_SYNC, auto_bind=True)
status, result, response, _ = conn.search('o=test', '(objectclass=*)')
# usually you don't need the original request (4th element of the returned tuple)
For most systems, the build requirements are now mentioned in python-ldap's documentation, in the "Installing" section.
If anything is missing for your system (or your system is missing entirely), please let maintainer know!
(As of 2018, I am the maintainer, so a comment here should be enough. Or you can send a pull request or mail.)
To correct the error due to dependencies to install the python-ldap : Windows 7/10
download the whl file
http://www.lfd.uci.edu/~gohlke/pythonlibs/#python-ldap.
python 3.6 suit with
python_ldap-3.2.0-cp36-cp36m-win_amd64.whl
Deploy the file in :
c:\python36\Scripts\
install it with
python -m pip install python_ldap-3.2.0-cp36-cp36m-win_amd64.whl
sudo apt-get install build-essential python3-dev python2.7-dev libldap2-dev libsasl2-dev slapd ldap-utils python-tox lcov valgrind
Debian Reference :
https://www.python-ldap.org/en/latest/installing.html#debian
For others: https://www.python-ldap.org/en/latest/installing.html
On OSX, you need the xcode CLI tools. Just open a terminal and run:
xcode-select --install
For ArchLinux/Manjaro for me helped the following command:
yay libldap24
As of december 2021 there was/is a strange problem with the ldap library (at least in arch/manjaro).
While installing python-ldap (at 'Building wheel for python-ldap') I got the message 'ERROR: Failed building wheel for python-ldap':
/usr/bin/ld: cannot find -lldap_r
collect2: error: ld returned 1 exit status
error: command '/usr/bin/gcc' failed with exit code 1
a workaround is provided here: https://github.com/python-ldap/python-ldap/issues/432#issuecomment-974799221
I cite:
As a workaround create the file /usr/lib64/libldap_r.so with content
INPUT ( libldap.so ). The approach works on all systems that use a GNU
ld-compatible linker.
# cat > /usr/lib64/libldap_r.so << EOF
INPUT ( libldap.so )
EOF
In FreeBSD 11:
pkg install openldap-client # for lber.h
pkg install cyrus-sasl # if you need sasl.h
pip install python-ldap
As a general solution to install Python packages with binary dependencies [1] on Debian/Ubuntu:
sudo apt-get build-dep python-ldap
# installs system dependencies (but not the package itself)
pew workon my_virtualenv # enter your virtualenv
pip install python-ldap
You'll have to check the name of your Python package on Ubuntu versus PyPI. In this case they're the same.
Obviously doesn't work if the Python package is not in the Ubuntu repos.
[1] I learnt this trick when trying to pip install matplotlib on Ubuntu.
If you're working with windows machines, you can find 'python-ldap' wheel in this Link and then you can install it
for those who are using alphine linux,
apk add openldap-dev
try:
ARCHFLAGS="-arch x86_64" pip3 install python-ldap
Adding also libzbar-dev solved for me the installation of python-ldap when building DOCKER
The full command becomes:
apt-get install -y python-dev libldap2-dev libsasl2-dev libssl-dev libzbar-dev
A hack answer for FreeBSD 13.1 (yes, I know this is deep South of best practices, but I just needed a quick fix):
pkg install openldap24-client
cd /usr/local/include/python3.9
ln -s ../<all of the below> .
lber.h
lber_types.h
ldap.h
ldap_cdefs.h
ldap_features.h
ldap_schema.h
ldap_utf8.h
openldap.h
sasl
pip install python-ldap
I am using CentOS. It has Python 3.6 version installed.
From command line if I try to execute PIP, I get error: "Command not found"
How to add Python folder to the environment path?
Pip is not available in CentOS 7 core repositories. To install pip we need to enable the EPEL repository:
sudo yum install epel-release
Once the EPEL repository is enabled we can install pip and all of its dependencies with the following command:
sudo yum install python-pip
To verify that the pip is installed correctly run the following command which will print the pip version:
pip --version
Enjoy! :)
Apparently you should install pip separately in CentOS.
Try this Link.