We Keep Coding

How do I install tkinter on RedHat?

I am trying to install tkinter on Redhat 7.7. I have tried every combination if "sudo yum install [whatever]" and every single time it comes up with "No package [whatever] available".
pip install tkinter
pip3 install tkinter
sudo yum install python3-tkinter
sudo yum install tkinter
sudo yum install python36-tkinter
sudo yum -y install python36u-tkinter
sudo yum -y install python36-tkinter
sudo yum install tkinter
sudo yum install python36-tkinter
sudo yum install python35-tkinter.x86_64
...etc
I have tried to find what repository I might need to enable but RedHat support is all behind a pay wall. What repository do I need to enable?
At this point I am actually considering just switching to Ubuntu as RedHat is giving me all sorts of problems.
EDIT: I tried yum search tkinter and got the following:
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
manager
Repo rhel-7-workstation-rpms forced skip_if_unavailable=True due to:
/etc/pki/entitlement/4690243650278863397-key.pem
====================== Matched:tkinter==========================
python3.x86_64 : Interpreter of the Python programming language
I already have python3 installed. I don't know if had I installed via sudo yum install python3.x86_64 vs sudo yum install python3 I would have got different results.

This works for me!
sudo yum search tkinter
sudo yum install python3-tkinter.x86_64

Alright, so I managed to fix this to my satisfaction. What I did is outlined here. First I installed ActiveState's ActiveTcl 8.5, then rebuilt python 3.6 manually by downloading the source using the following:
$: ./configure --with-tcltk-includes='-I/opt/ActiveTcl-8.5/include'
--with-tcltk-libs='/opt/ActiveTcl-8.5/lib/libtcl8.5.so /opt/ActiveTcl-
8.6/lib/libtk8.5.so'
$: make
$: make install
Because I had a couple different versions of Python 3.x, I had to add the following to the .bashrc:
export PYTHONPATH=/usr/local/lib/python36.zip:/usr/local/lib/python3.6:/usr/local/lib/python3.6/lib-dynload:/usr/local/lib/python3.6/site-packages:/usr/local/lib64/python3.6/site-packages
One big issue I ran into was first manually installing Python 3.8 (which came out yesterday) for which there seems to be little support for most packages so far, so be advised. I also had a few system-specific issues with pip.

Installing pyPdf library module in kali linux to work on Pdf files

How to install pyPdf module in my kali linux ?
I tried with $sudo apt-get install python-pyPdf
getting the error as
E:unable to locate the package python-pyPdf

You are trying to install a Python package using Linux native package management system. It won't work. I believe you have Python and pip installed in Kali. Try,
pip install PyPdf

Update for Kali 2020v4 to solve that issue:
Run
sudo bash
apt-get update
apt-get upgrade
First, check if you have pip3 previously installed
pip3
If the output is command not found then:
apt-get install python3-pip
After having it installed or if you have a pip3 previously installed, run the following command.
pip3 install PyPDF3

Pip command not found in bash - OSX [duplicate]

I downloaded pip and ran python setup.py install and everything worked just fine. The very next step in the tutorial is to run pip install <lib you want> but before it even tries to find anything online I get an error "bash: pip: command not found".
This is on Mac OS X. I'm assuming there's some kind of path setting that was not set correctly when I ran setup.py. How can I investigate further? What do I need to check to get a better idea of the exact cause of the problem?
EDIT: I also tried installing Python 2.7 for Mac in the hopes that the friendly install process would do any housekeeping like editing PATH and whatever else needs to happen for everything to work according to the tutorials, but this didn't work. After installing, running 'python' still ran Python 2.6 and PATH was not updated.

Why not just do sudo easy_install pip or if this is for python 2.6 sudo easy_install-2.6 pip?
This installs pip using the default python package installer system and saves you the hassle of manual set-up all at the same time.
This will allow you to then run the pip command for python package installation as it will be installed with the system python. I also recommend once you have pip using the virtualenv package and pattern. :)

2020 Update:
For current Debian/Ubuntu, use
apt-get install python3-pip
to install pip3.
Old 2013 answer (easy_install is now deprecated):
Use setuptools to install pip: sudo easy_install pip
(I know the above part of my answer is redundant with klobucar's, but I can't add comments yet), so here's an answer with a solution to sudo: easy_install: command not found on Debian/Ubuntu: sudo apt-get install python-setuptools
Also, for python3, use easy_install3 and python3-setuptools.
For Python 3, use apt-get install python3-pip.

First of all: try pip3 instead of pip. Example:
pip3 --version
pip 9.0.1 from /usr/local/lib/python3.6/site-packages (python 3.6)
pip3 should be installed automatically together with Python3.x. The documentation hasn't been updated, so simply replace pip by pip3 in the instructions, when installing Flask for example.
Now, if this doesn't work, you might have to install pip separately.

Update: A more reliable modern way to access the right pip install for the right python install is to use the syntax python -m pip.
Original Answer
pip would install itself into the bin of your python installation location. It also should create a symlink to some more common location like /usr/local/bin/pip
You can either edit your ~/.profile and update your PATH to include /Library/Frameworks/Python.framework/Versions/2.6/bin, or you could create a symlink to it in a place that you know is in your path.
If you do: echo $PATH, you should see the paths currently being searched. If /usr/local/bin is in your PATH, you can do:
ln -s /Library/Frameworks/Python.framework/Versions/2.6/bin/pip /usr/local/bin
I would opt for adding the python bin to your $PATH variable.

I encountered this problem having downloaded python 3.x.x and trying to install awscli - pip: command not found.
Whilst following the instructions for downloading the AWS client, I changed
pip install awscli
to
pip3 install awscli
which ran the correct version.
I've made an alias on my machine to run python3 whilst typing python, which would normally run the system version 2.7. I'm not sure this is a good idea now. I think I'll just type in the commands as they intended them to be.

Check out How to Install Pip article for more information.
As of 2019,
Download get-pip.py provided by https://pip.pypa.io using the following command:
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Run get-pip.py using the following command:
sudo python get-pip.py
After you done installing, run this command to check if pip is installed.
pip --version
Remove get-pip.py file after installing pip.
rm get-pip.py

Install Python latest version as given here
It has many download links like numpy and scipy
Then go to terminal and enter following command:-
sudo easy_install pip
For Python install packages check this
Requirements for Installing Packages
This section describes the steps to follow before installing other Python packages.
Install pip, setuptools, and wheel If you have Python 2 >=2.7.9 or
Python 3 >=3.4 installed from python.org, you will already have pip
and setuptools, but will need to upgrade to the latest version:
On Linux or OS X:
pip install -U pip setuptools On Windows:
python -m pip install -U pip setuptools If you’re using a Python
install on Linux that’s managed by the system package manager (e.g
“yum”, “apt-get” etc…), and you want to use the system package manager
to install or upgrade pip, then see Installing pip/setuptools/wheel
with Linux Package Managers
Otherwise:
Securely Download get-pip.py 1
Run python get-pip.py. 2 This will install or upgrade pip.
Additionally, it will install setuptools and wheel if they’re not
installed already.

I spent ages going through all the answers on this page but found the one that worked for me in the comments of the OP question by s-walsh
The answer is to use pip3:
$ pip3 install <name-of-install>

Installing using apt-get installs a system wide pip, not just a local one for your user. Try this command to get pip running on your system ...
$ sudo apt-get install python-pip python-dev build-essential
Then pip will be installed without any issues and you will be able to use "sudo pip...".

Most of the methods to install PIP are deprecated. Here is the latest (2019) solution. Please download get-pip script
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
Run the script
sudo python get-pip.py

Latest update 2021.
In Ubuntu 20 64bit works perfectly
Installation of python3
sudo apt install python3
Pip Installation
sudo apt install python3-pip
Add following alias in $HOME/.bash_aliases in some cases file may be hidden.
alias pip="/usr/bin/python3 -m pip "
Refresh current terminal session.
. ~/.profile
check pip usage: pip
Install a package: pip install {{package_name}}
extra info
to get Home path
echo $HOME
you will get your home path.

To solve:
Add this line to ~/.bash_profile:
export PATH="/usr/local/bin:$PATH"
In a terminal window, run
source ~/.bash_profile

It might be the root permission. I tried exit root login, and use
sudo su -l root
pip <command>

install Homebrew, open Terminal or your favorite OSX terminal emulator and run
$ /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
insert the Homebrew directory at the top of your PATH environment variable. You can do this by adding the following line at the bottom of your ~/.profile file
export PATH=/usr/local/bin:/usr/local/sbin:$PATH
Now, we can install Python 2.7:
$ brew install python
Get pip repository:
$ git clone https://github.com/pypa/pip
install pip:
$sudo easy_install pip

python install it by default but if not install you can install it manual use following cmd (for linux only )
for python3 :
sudo apt install python3-pip
for python2
sudo apt install python-pip
hope its help.

If you are running Python 3.5, run the following terminal command:
sudo pip3 install -U nltk
Any other pip commands in terminal would be similar:
pip3 install --upgrade pip
sudo pip3 install -U numpy ::

It solved my problem by using
sudo easy_install pip

Solved this by upgrading python 3 brew upgrade python:
Now i can just do:
pip3 install <package>
==> python
Python has been installed as
/usr/local/bin/python3
Unversioned symlinks `python`, `python-config`, `pip` etc. pointing to
`python3`, `python3-config`, `pip3` etc., respectively, have

Based on this stackoverflow answer and some of the answers on this thread, I have created an alias in the rc file:
alias pip="python3 -m pip"
There seem to be many different answers to this question but this seems to be the best-practice approach.

Avoiding sudo:
python <(curl https://bootstrap.pypa.io/get-pip.py) --user
echo 'export "PATH=$HOME/Library/Python/2.7/bin:$PATH"' >> ~/.bash_profile
From:
http://www.pip-command-not-found.com

CentOS 7 users can just use:
yum install python-pip
Also recommend using virtualenv if you're using pip. It can be added in the same way:
yum install python-virtualenv

assuming you have internet see:
https://pip.pypa.io/en/stable/installing/
basically run:
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
and
python get-pip.py

Try using this. Instead of zmq, we can use any package instead of zmq.
sudo apt-get install python3-pip
sudo apt-get update
python3 -m pip install zmq
I was was not able to install this zmq package in my docker image because of the same issue i was getting. So tried this as another way to install and it worked fine for me.

To overcome the issue bash: pip: command not found in Mac
Found two versions on Mac 1 is 2.7 and the other is 3.7
when I say sudo easy_install pip, pip got installed under 2.7
when I say sudo easy_install-3.7 pip, pip got installed under 3.7
But, whenever I would require to do pip install , I wanted to install the package under python3.7, so I have set an alias (alias pip=pip3) in .bash_profile.
so now, whenever I do pip install <package_name>, it gets installed under python3.7

(Context: My OS is Amazon linux using AWS. It seems similar to RedHat but it's stripped down a bit, it seems.)
Exit the shell, then open a new shell. The pip command now works.
That's what solved the problem at this location.
You might want to know as well: The pip commands to install software then needed to be written like this example (jupyter for example) to work correctly on my system:
pip install jupyter --user
Specifically, note the lack of sudo, and the presence of --user
Would be real nice if pip docs had said anything about all this, but that would take typing in more characters I guess.

Not sure why this wasnt mentioned before, but the only thing that worked for me (on my NVIDIA Xavier) was:
sudo apt-get install python3-pip
(or sudo apt-get install python-pip for python 2)

apt -y -qq install python3 python3-pip
ln -s /usr/bin/python3 /usr/bin/python
ln -s /usr/bin/pip3 /usr/bin/pip

What I did to overcome this was sudo apt install python-pip.
It turned out my virtual machine did not have pip installed yet. It's conceivable that other people could have this scenario too.

The updated command for installing pip3 is :
sudo apt-get install python3-pip

The problem seems that your python version and the library yoıu want to install is not matching versionally. Ex: If Django is Django3 and your python version is 2.7, you may get this error.
"After installing is running 'python' still ran Python 2.6 and PATH was not updated."
1- Install latest version of Python
2- Change your PATH manually as python38 and compare them.
3- Try to reinstall.
I solved this problem as replacing PATH manually with the latest version of Python.
As for Windows: ;C:\python38\Scripts

How to install python27-devel on Centos 6.5

I have installed python 2.7.6 from source, but can't find how to install python-devel for python 2.7
yum install python27-devel
doesn't work. How to install it?

Thanks for your feedback. First of all, if you try to run yum install python27-devel, then you should get the message like this:
No package python27-devel available
Then I followed this link,
yum search python | grep -i devel
This will show you that you have python-devel.x86_64 package available if your OS is a 64 bit OS. If I am correct, then the following command should work fine as shown in the accepted answer:
yum install python-devel.x86_64

I run Centos 6.5 on Virtualbox and this command solved it.
# yum update
# yum install centos-release-SCL
# yum install python27

I can't install python-ldap

When I run the following command:
sudo pip install python-ldap
I get this error:
In file included from Modules/LDAPObject.c:9:
Modules/errors.h:8: fatal error: lber.h: No such file or directory
Any ideas how to fix this?

The python-ldap is based on OpenLDAP, so you need to have the development files (headers) in order to compile the Python module. If you're on Ubuntu, the package is called libldap2-dev.
Debian/Ubuntu:
sudo apt-get install libsasl2-dev python-dev libldap2-dev libssl-dev
RedHat/CentOS:
sudo yum install python-devel openldap-devel

To install python-ldap successfully with pip, following development libraries are needed (package names taken from ubuntu environment):
sudo apt-get install -y python-dev libldap2-dev libsasl2-dev libssl-dev

On CentOS/RHEL 6, you need to install:
sudo yum install python-devel
sudo yum install openldap-devel
and yum will also install cyrus-sasl-devel as a dependency. Then you can run:
pip-2.7 install python-ldap

"Don't blindly remove/install software"
In a Ubuntu or Debian based distro, you can use apt-file to find the name of the exact package that includes the missing header file.
# do this once
sudo apt-get install apt-file
sudo apt-file update
$ apt-file search lber.h
libldap2-dev: /usr/include/lber.h
As you could see from the output of apt-file search lber.h, you'd just need to install the package libldap2-dev.
sudo apt-get install libldap2-dev

In Ubuntu it looks like this :
$ sudo apt-get install python-dev libldap2-dev libsasl2-dev libssl-dev
$ sudo pip install python-ldap

Windows: I completely agree with the accepted answer, but digging through the comments took a while to get to the meat of what I needed. I ran across this specific problem with Reviewboard on Windows using the Bitnami. To give an answer for windows then, I used this link mentioned in the comments:
http://www.lfd.uci.edu/~gohlke/pythonlibs/#python-ldap
placed that wheel (whl file) into my reviewboard install directory
Then, executed the following commands
easy_install pip
pip install python_ldap-2.4.20-cp27-none_win32.whl
(because I had python 2.7 and a 32bit install at that)
easy_install python-ldap

For those having the same issue of missing Iber.h on Alpine Linux, in a docker image that you are trying to adapt to Alpine for instance.
The package you are looking for is: openldap-dev
So run
apk add openldap-dev
Available from version 3.3 up to Edge
Available for both armhf and x86_64 Architectures.

On Fedora 22, you need to do this instead:
sudo dnf install python-devel
sudo dnf install openldap-devel

On openSUSE you need to install the packages openldap2-devel, cyrus-sasl-devel, python-devel and libopenssl-devel.
zypper install openldap2-devel cyrus-sasl-devel python-devel libopenssl-devel

python3 does not support python-ldap. Rather to install ldap3.

For alpine docker
apk add openldap-dev
if the python version is 3 and above try
pip install python3-ldap

I had problems with the installation on Windows, so one of the solutions is to install the ldap package manually.
A few steps:
Go to the page pyldap or/and python-ldap and download the latest version *whl.
Open a console then cd to where you've downloaded your file like some-package.whl and use:
pip install some-package.whl
The current version for pyldap is 2.4.45. On a concrete example the installation would be:
pip install .\pyldap-2.4.45-cp37-cp37m-win_amd64.whl
# or
pip install .\python_ldap‑3.3.1‑cp39‑cp39‑win_amd64.whl
Output:
Installing collected packages: pyldap
Successfully installed pyldap-2.4.45
EDIT
You can install the proper version for Python-3.X though using following command:
# if pip3 is the default pip alias for python-3
pip3 install python3-ldap
# otherwise
pip install python3-ldap
Also here is the link of PiPy package for further information: python3-ldap 0.9.8.4
OR
ldap3 is a strictly RFC 4510 conforming LDAP V3 pure Python client library. The same codebase runs in Python 2, Python 3, PyPy and PyPy3: https://github.com/cannatag/ldap3
pip install ldap3
from ldap3 import Server, Connection, SAFE_SYNC
server = Server('my_server')
conn = Connection(server, 'my_user', 'my_password', client_strategy=SAFE_SYNC, auto_bind=True)
status, result, response, _ = conn.search('o=test', '(objectclass=*)')
# usually you don't need the original request (4th element of the returned tuple)

For most systems, the build requirements are now mentioned in python-ldap's documentation, in the "Installing" section.
If anything is missing for your system (or your system is missing entirely), please let maintainer know!
(As of 2018, I am the maintainer, so a comment here should be enough. Or you can send a pull request or mail.)

To correct the error due to dependencies to install the python-ldap : Windows 7/10
download the whl file
http://www.lfd.uci.edu/~gohlke/pythonlibs/#python-ldap.
python 3.6 suit with
python_ldap-3.2.0-cp36-cp36m-win_amd64.whl
Deploy the file in :
c:\python36\Scripts\
install it with
python -m pip install python_ldap-3.2.0-cp36-cp36m-win_amd64.whl

sudo apt-get install build-essential python3-dev python2.7-dev libldap2-dev libsasl2-dev slapd ldap-utils python-tox lcov valgrind
Debian Reference :
https://www.python-ldap.org/en/latest/installing.html#debian
For others: https://www.python-ldap.org/en/latest/installing.html

On OSX, you need the xcode CLI tools. Just open a terminal and run:
xcode-select --install

For ArchLinux/Manjaro for me helped the following command:
yay libldap24

As of december 2021 there was/is a strange problem with the ldap library (at least in arch/manjaro).
While installing python-ldap (at 'Building wheel for python-ldap') I got the message 'ERROR: Failed building wheel for python-ldap':
/usr/bin/ld: cannot find -lldap_r
collect2: error: ld returned 1 exit status
error: command '/usr/bin/gcc' failed with exit code 1
a workaround is provided here: https://github.com/python-ldap/python-ldap/issues/432#issuecomment-974799221
I cite:
As a workaround create the file /usr/lib64/libldap_r.so with content
INPUT ( libldap.so ). The approach works on all systems that use a GNU
ld-compatible linker.
# cat > /usr/lib64/libldap_r.so << EOF
INPUT ( libldap.so )
EOF

In FreeBSD 11:
pkg install openldap-client # for lber.h
pkg install cyrus-sasl # if you need sasl.h
pip install python-ldap

As a general solution to install Python packages with binary dependencies [1] on Debian/Ubuntu:
sudo apt-get build-dep python-ldap
# installs system dependencies (but not the package itself)
pew workon my_virtualenv # enter your virtualenv
pip install python-ldap
You'll have to check the name of your Python package on Ubuntu versus PyPI. In this case they're the same.
Obviously doesn't work if the Python package is not in the Ubuntu repos.
[1] I learnt this trick when trying to pip install matplotlib on Ubuntu.

If you're working with windows machines, you can find 'python-ldap' wheel in this Link and then you can install it

for those who are using alphine linux,
apk add openldap-dev

try:
ARCHFLAGS="-arch x86_64" pip3 install python-ldap

Adding also libzbar-dev solved for me the installation of python-ldap when building DOCKER
The full command becomes:
apt-get install -y python-dev libldap2-dev libsasl2-dev libssl-dev libzbar-dev

A hack answer for FreeBSD 13.1 (yes, I know this is deep South of best practices, but I just needed a quick fix):
pkg install openldap24-client
cd /usr/local/include/python3.9
ln -s ../<all of the below> .
lber.h
lber_types.h
ldap.h
ldap_cdefs.h
ldap_features.h
ldap_schema.h
ldap_utf8.h
openldap.h
sasl
pip install python-ldap