Related
So, I have three numpy arrays which store latitude, longitude, and some property value on a grid -- that is, I have LAT(y,x), LON(y,x), and, say temperature T(y,x), for some limits of x and y. The grid isn't necessarily regular -- in fact, it's tripolar.
I then want to interpolate these property (temperature) values onto a bunch of different lat/lon points (stored as lat1(t), lon1(t), for about 10,000 t...) which do not fall on the actual grid points. I've tried matplotlib.mlab.griddata, but that takes far too long (it's not really designed for what I'm doing, after all). I've also tried scipy.interpolate.interp2d, but I get a MemoryError (my grids are about 400x400).
Is there any sort of slick, preferably fast way of doing this? I can't help but think the answer is something obvious... Thanks!!
Try the combination of inverse-distance weighting and
scipy.spatial.KDTree
described in SO
inverse-distance-weighted-idw-interpolation-with-python.
Kd-trees
work nicely in 2d 3d ..., inverse-distance weighting is smooth and local,
and the k= number of nearest neighbours can be varied to tradeoff speed / accuracy.
There is a nice inverse distance example by Roger Veciana i Rovira along with some code using GDAL to write to geotiff if you're into that.
This is of coarse to a regular grid, but assuming you project the data first to a pixel grid with pyproj or something, all the while being careful what projection is used for your data.
A copy of his algorithm and example script:
from math import pow
from math import sqrt
import numpy as np
import matplotlib.pyplot as plt
def pointValue(x,y,power,smoothing,xv,yv,values):
nominator=0
denominator=0
for i in range(0,len(values)):
dist = sqrt((x-xv[i])*(x-xv[i])+(y-yv[i])*(y-yv[i])+smoothing*smoothing);
#If the point is really close to one of the data points, return the data point value to avoid singularities
if(dist<0.0000000001):
return values[i]
nominator=nominator+(values[i]/pow(dist,power))
denominator=denominator+(1/pow(dist,power))
#Return NODATA if the denominator is zero
if denominator > 0:
value = nominator/denominator
else:
value = -9999
return value
def invDist(xv,yv,values,xsize=100,ysize=100,power=2,smoothing=0):
valuesGrid = np.zeros((ysize,xsize))
for x in range(0,xsize):
for y in range(0,ysize):
valuesGrid[y][x] = pointValue(x,y,power,smoothing,xv,yv,values)
return valuesGrid
if __name__ == "__main__":
power=1
smoothing=20
#Creating some data, with each coodinate and the values stored in separated lists
xv = [10,60,40,70,10,50,20,70,30,60]
yv = [10,20,30,30,40,50,60,70,80,90]
values = [1,2,2,3,4,6,7,7,8,10]
#Creating the output grid (100x100, in the example)
ti = np.linspace(0, 100, 100)
XI, YI = np.meshgrid(ti, ti)
#Creating the interpolation function and populating the output matrix value
ZI = invDist(xv,yv,values,100,100,power,smoothing)
# Plotting the result
n = plt.normalize(0.0, 100.0)
plt.subplot(1, 1, 1)
plt.pcolor(XI, YI, ZI)
plt.scatter(xv, yv, 100, values)
plt.title('Inv dist interpolation - power: ' + str(power) + ' smoothing: ' + str(smoothing))
plt.xlim(0, 100)
plt.ylim(0, 100)
plt.colorbar()
plt.show()
There's a bunch of options here, which one is best will depend on your data...
However I don't know of an out-of-the-box solution for you
You say your input data is from tripolar data. There are three main cases for how this data could be structured.
Sampled from a 3d grid in tripolar space, projected back to 2d LAT, LON data.
Sampled from a 2d grid in tripolar space, projected into 2d LAT LON data.
Unstructured data in tripolar space projected into 2d LAT LON data
The easiest of these is 2. Instead of interpolating in LAT LON space, "just" transform your point back into the source space and interpolate there.
Another option that works for 1 and 2 is to search for the cells that maps from tripolar space to cover your sample point. (You can use a BSP or grid type structure to speed up this search) Pick one of the cells, and interpolate inside it.
Finally there's a heap of unstructured interpolation options .. but they tend to be slow.
A personal favourite of mine is to use a linear interpolation of the nearest N points, finding those N points can again be done with gridding or a BSP. Another good option is to Delauney triangulate the unstructured points and interpolate on the resulting triangular mesh.
Personally if my mesh was case 1, I'd use an unstructured strategy as I'd be worried about having to handle searching through cells with overlapping projections. Choosing the "right" cell would be difficult.
I suggest you taking a look at GRASS (an open source GIS package) interpolation features (http://grass.ibiblio.org/gdp/html_grass62/v.surf.bspline.html). It's not in python but you can reimplement it or interface with C code.
Am I right in thinking your data grids look something like this (red is the old data, blue is the new interpolated data)?
alt text http://www.geekops.co.uk/photos/0000-00-02%20%28Forum%20images%29/DataSeparation.png
This might be a slightly brute-force-ish approach, but what about rendering your existing data as a bitmap (opengl will do simple interpolation of colours for you with the right options configured and you could render the data as triangles which should be fairly fast). You could then sample pixels at the locations of the new points.
Alternatively, you could sort your first set of points spatially and then find the closest old points surrounding your new point and interpolate based on the distances to those points.
There is a FORTRAN library called BIVAR, which is very suitable for this problem. With a few modifications you can make it usable in python using f2py.
From the description:
BIVAR is a FORTRAN90 library which interpolates scattered bivariate data, by Hiroshi Akima.
BIVAR accepts a set of (X,Y) data points scattered in 2D, with associated Z data values, and is able to construct a smooth interpolation function Z(X,Y), which agrees with the given data, and can be evaluated at other points in the plane.
I have 2 arrays, x and y, respectively representing each point's coordinate on a 2D plane. I also have another 3 arrays of the same length as x and y. These three arrays represent the RGB values of a color. Therefore, each point in x,y correspond to a color indicated by the RGB arrays. In Python, how can I plot a heat map with x,y as its axes and colors from the three RGB arrays? Each array is, say, 1000 in length.
As an example that takes the first 10 points, I have:
x = [10.946028, 16.229064, -36.855, -38.719057, 11.231684, 33.256904999999996, -41.21, 12.294958, 16.113228, -43.429027000000005]
y = [-21.003803, 4.5, 4.5, -22.135853, 4.084630000000001, 17.860079000000002, -18.083685, -3.98297, -19.565272, 0.877016]
R = [0,1,2,3,4,5,6,7,8,9]
G = [2,4,6,8,10,12,14,16,18,20]
B = [0,255,0,255,0,255,0,255,0,255]
I'd like to draw a heat map that, for example, the first point would have the coordinates (10.946028,-21.003803) and has a color of R=0,G=2,B=0. The second point would have the coordinates (16.229064, 4.5) and has a color of R=1,G=4,B=255.
Ok it seems like you want like your own colormap for your heatmap. Actually you can write your own, or just use some of matplotlibs templates. Check out this post for the use of heatmaps with matplotlib. If you want to do it on your own, the easiest way is to recombine the 5 one-dimension vectors to a 3D-RGB image. Afterwards you have to define a mapping function which combines the R-G and B value to a new single value for every pixel. Like:
f(R,G,B) = a*R +b*G + c*B
a,b,c can be whatever you like, actually the formular can be way more complex, but you have to determine in which correlation the values should be. From that you get a 2D-Matrix filled with values of your function f(R,G,B). Now you have to define which value of this new matrix gets what color. This can be a linear mapping by hand (like just writing a list: 0=deep-Blue , 1= ligth-Red ...). Using this look-up table you can now get your own specific heatmap. But as you may see, that path takes some time so i would recommend not doing it and just use one of the various templates of matplotlib. Example:
import matplotlib.pyplot as plt
import numpy as np
a = np.random.random((16, 16))
plt.imshow(a, cmap='hot', interpolation='nearest')
plt.show()
You can use various types of these buy changing the string after cmap="hot" to sth of that list. Hope i could help you, gl hf.
I have x,y,z data that define a surface (x and y position, z height).
The data is imperfect, in that it contains some noise, i.e. not every point lies precisely on the plane I wish to model, just very close to it.
I only have data within a triangular region, not the full x,y, plane.
Here is an example with z represented by colour:
In this example the data has been sampled in the centres of triangles on a mesh like this (each blue dot is a sample):
If it is necessary, the samples could be evenly spaced on an x,y grid, though a solution where this is not required is preferable.
I want to represent this data as a sum of sines and cosines in order to manipulate it mathematically. Ideally using as few terms as are needed to keep the error of the fit acceptably low.
If this were a square region I would take the 2D Fourier transform and discard higher frequency terms.
However I think this situation has two key differences that make this approach not viable:
Ideally I want to use samples at the points indicated by the blue dots in my grid above. I could instead use a regular x,y grid if there is no alternative, but this is not an ideal solution
I do not have data for the whole x,y, plane. The white areas in the first image above do not contain data that should be considered in the fit.
So in summary my question is thus:
Is there a way to extract coefficients for a best-fit of this data using a linear combination of sines and cosines?
Ideally using python.
My apologies if this is more of a mathematics question and stack overflow is not the correct place to post this!
EDIT: Here is an example dataset in python style [x,y,z] form - sorry it's huge but apparently I can't use pastebin?:
[[1.7500000000000001e-08, 1.0103629710818452e-08, 14939.866751020554],
[1.7500000000000001e-08, 2.0207259421636904e-08, 3563.2218207404617],
[8.7500000000000006e-09, 5.0518148554092277e-09, 24529.964593228644],
[2.625e-08, 5.0518148554092261e-09, 24529.961688158553],
[1.7500000000000001e-08, 5.0518148554092261e-09, 21956.74682671843],
[2.1874999999999999e-08, 1.2629537138523066e-08, 10818.190869824304],
[1.3125000000000003e-08, 1.2629537138523066e-08, 10818.186813746233],
[1.7500000000000001e-08, 2.5259074277046132e-08, 3008.9480862705223],
[1.3125e-08, 1.7681351993932294e-08, 5630.9978116591838],
[2.1874999999999999e-08, 1.768135199393229e-08, 5630.9969846863969],
[8.7500000000000006e-09, 1.0103629710818454e-08, 13498.380006002562],
[4.3750000000000003e-09, 2.5259074277046151e-09, 40376.866196753763],
[1.3125e-08, 2.5259074277046143e-09, 26503.432370909999],
[2.625e-08, 1.0103629710818452e-08, 13498.379635232159],
[2.1874999999999999e-08, 2.5259074277046139e-09, 26503.430698738041],
[3.0625000000000005e-08, 2.525907427704613e-09, 40376.867011915041],
[8.7500000000000006e-09, 1.2629537138523066e-08, 11900.832515759088],
[6.5625e-09, 8.8406759969661469e-09, 17422.002946526718],
[1.09375e-08, 8.8406759969661469e-09, 17275.788904632376],
[4.3750000000000003e-09, 5.0518148554092285e-09, 30222.756636780832],
[2.1875000000000001e-09, 1.2629537138523088e-09, 64247.241146490327],
[6.5625e-09, 1.2629537138523084e-09, 35176.652106572205],
[1.3125e-08, 5.0518148554092277e-09, 22623.574247287044],
[1.09375e-08, 1.2629537138523082e-09, 27617.700396641056],
[1.5312500000000002e-08, 1.2629537138523078e-09, 25316.907231576402],
[2.625e-08, 1.2629537138523066e-08, 11900.834523905782],
[2.4062500000000001e-08, 8.8406759969661469e-09, 17275.796410700641],
[2.8437500000000002e-08, 8.8406759969661452e-09, 17422.004617294893],
[2.1874999999999999e-08, 5.0518148554092269e-09, 22623.570035270699],
[1.96875e-08, 1.2629537138523076e-09, 25316.9042194055],
[2.4062500000000001e-08, 1.2629537138523071e-09, 27617.700160860692],
[3.0625000000000005e-08, 5.0518148554092261e-09, 30222.765972585737],
[2.8437500000000002e-08, 1.2629537138523069e-09, 35176.65151453446],
[3.2812500000000003e-08, 1.2629537138523065e-09, 64247.246775422129],
[2.1875000000000001e-09, 2.5259074277046151e-09, 46711.23463223876],
[1.0937500000000001e-09, 6.3147685692615553e-10, 101789.89315354674],
[3.28125e-09, 6.3147685692615543e-10, 52869.788364220134],
[3.2812500000000003e-08, 2.525907427704613e-09, 46711.229428833962],
[3.1718750000000001e-08, 6.3147685692615347e-10, 52869.79233902022],
[3.3906250000000006e-08, 6.3147685692615326e-10, 101789.92509671643],
[1.0937500000000001e-09, 1.2629537138523088e-09, 82527.848790063814],
[5.4687500000000004e-10, 3.1573842846307901e-10, 137060.87432327325],
[1.640625e-09, 3.157384284630789e-10, 71884.380087542726],
[3.3906250000000006e-08, 1.2629537138523065e-09, 82527.861035177877],
[3.3359375000000005e-08, 3.1573842846307673e-10, 71884.398689011548],
[3.4453125000000001e-08, 3.1573842846307663e-10, 137060.96214950032],
[4.3750000000000003e-09, 6.3147685692615347e-09, 18611.868317256733],
[3.28125e-09, 4.4203379984830751e-09, 27005.961455364879],
[5.4687499999999998e-09, 4.4203379984830751e-09, 28655.126635802204],
[3.0625000000000005e-08, 6.314768569261533e-09, 18611.869287539808],
[2.9531250000000002e-08, 4.4203379984830734e-09, 28655.119850641502],
[3.1718750000000001e-08, 4.4203379984830726e-09, 27005.959731047784]]
Nothing stops you from doing normal linear least squares with whatever basis you like. (You'll have to work out the periodicity you want, as mikuszefski said.) The lack of samples outside the triangle will naturally blind the method to the function's behavior out there. You probably want to weight the samples according to the area of their mesh cell, to avoid overfitting the corners.
Here some code that might help to fit periodic spikes. That also shows the use of the base x, x/2+ sqrt(3)/2 * y. The flat part can then be handled by low order Fourier. I hope that gives an idea. (BTW I agree with Davis Herring that area weighting is a good idea). For the fit, I guess, good initial guesses are crucial.
from mpl_toolkits.mplot3d import Axes3D
import matplotlib.pyplot as plt
from matplotlib import cm
import numpy as np
def gauss(x,s):
return np.exp(-x**2/(2.*s**2))
fig = plt.figure()
ax = fig.gca(projection='3d')
X = np.arange(-5, 5, 0.15)
Y = np.arange(-5, 5, 0.15)
X, Y = np.meshgrid(X, Y)
kX=np.sin(X)
kY=np.sin(0.5*X+0.5*np.sqrt(3.)*Y)
R = np.sqrt(kX**2 + kY**2)
Z = gauss(R,.4)
#~ surf = ax.plot_wireframe(X, Y, Z, linewidth=1)
surf= ax.plot_surface(X, Y, Z, rstride=1, cstride=1,linewidth=0, antialiased=False)
plt.show()
Output:
I want to create a small simulation, and I think I know how, but in order to actually see what happens I need to visualize it.
I started with a 5x5x5 array, which I want to fill up with values.
data = numpy.zeros(shape=(5,5,5))
data[:,:,0]=4
data[:,:,1]=3
data[:,:,2]=2
data[:,:,3]=1
data[:,:,4]=0
This should create a cube which has a gradient in the upward direction (if the third axis is z).
Now, how can I plot this? I dont want a surface plot, or wireframe. Just Points on each coordinate, and maybe colorcoded or transperency by value.
As a test I tried plotting all coordinates using
ax.scatter(numpy.arange(5),numpy.arange(5),numpy.arange(5))
but this will only plot a line consisting of 5 dots.
So... how can I get the 125 dots, that I want to create?
Thx.
You can encode the value in color like this:
x = np.arange(5)
X, Y, Z = np.meshgrid(x,x,x)
v = np.arange(125)
ax.scatter(X,Y,Z, c=v)
See here for the documention.
I have some data over a 2D range that I am interested in analyzing. These data were originally in lists x,y, and z where z[i] was the value for the point located at (x[i],y[i]). I then interpolated this data onto a regular grid using
x=np.array(x)
y=np.array(y)
z=np.array(z)
xi=np.linspace(minx,maxx,100)
yi=np.linspace(miny,maxy,100)
zi=griddata(x,y,z,xi,yi)
I then plotted the xi,yi,zi data using
plt.contour(xi,yi,zi)
plt.pcolormesh(xi,yi,zi,cmap=plt.get_cmap('PRGn'),norm=plt.Normalize(-10,10),vmin=-10,vmax=10)
This produced this plot:
In this plot you can see the S-like curve where the values are equal to zero (aside: the data doesn't vary as rapidly as shown in the colorbar -- that's simply a result of me normalizing the data to -10-10 when it actually extends far beyond that range; I did this to make the zero-valued region show up better -- maybe there's a better way of doing this too...).
The scattered dots are simply the points at which I have original data (yes, in this case my data was already on a regular grid). What I'm curious about is whether there is a good way for me to extract the values for which the curve is zero and obtain x,y pairs that, if plotted as a line, would trace that zero-region in the colormesh. I could interpolate to a really fine grid and then just brute force search for the values which are closest to zero. But is there a more automatic way of doing this, or a more automatic way of plotting this "zero-line"?
And a secondary question: I am using griddata correctly, right? I have these simple 1D arrays although elsewhere people use various meshgrids, loading texts, etc., before calling griddata.
Here is a full example:
import numpy as np
import matplotlib.pyplot as plt
y, x = np.ogrid[-1.5:1.5:200j, -1.5:1.5:200j]
f = (x**2 + y**2)**4 - (x**2 - y**2)**2
plt.figure(figsize=(9,4))
plt.subplot(121)
extent = [np.min(x), np.max(x), np.min(y), np.max(y)]
cs = plt.contour(f, extent=extent, levels=[0.1],
colors=["b", "r"], linestyles=["solid", "dashed"], linewidths=[2, 2])
plt.subplot(122)
# get the points on the lines
for c in cs.collections:
data = c.get_paths()[0].vertices
plt.plot(data[:,0], data[:,1],
color=c.get_color()[0], linewidth=c.get_linewidth()[0])
plt.show()
here is the output: