I am working with python and django in Atom, however I get this error when I want to run the server.
I change the path several times but nothing changed.
Did you try searching for the error message?
By default when you install Python on Windows, it is not accessible globally. In order to be able to access it from anywhere, you need to add your python installation folder to your PATH variables
From the desktop, right-click My Computer and click Properties.
In the System Properties window, click on the Advanced tab.
In the Advanced section, click the Environment Variables button.
Highlight the Path variable in the Systems Variable section and click the Edit button.
Add the path of your python executable(c:\Python27). Each different directory is separated with a semicolon. (Note: do not put spaces between elements in the PATH. Your addition to the PATH should read ;c:\Python27 NOT ; C\Python27)
Apply the changes. You might need to restart your system, though simply restarting cmd.exe should be sufficient.
Launch cmd and try again. It should work.
Also since you're using Atom, you might be able to skip this and set the path to the Python executable in Atom's settings.
I have never used Atom, but most IDE's allow you to do so in the settings.
I am using PyCharm to work on a project. The project is opened and configured with an interpreter, and can run successfully. The remote interpreter paths are mapped properly. This seems to be the correct configuration, but PyCharm is highlighting my valid code with "unresolved reference" errors, even for built-in Python functions. Why don't these seem to be detected, even though the code runs? Is there any way to get PyCharm to recognize these correctly?
This specific instance of the problem is with a remote interpreter, but the problem appears on local interpreters as well.
File | Invalidate Caches... and restarting PyCharm helps.
Dmitry's response didn't work for me.
I got mine working by going to Project Interpreters, Selecting the "Paths" tab, and hitting the refresh button in that submenu. It auto-populated with something called "python-skeletons".
edit: screenshot using PyCharm 3.4.1 (it's quite well hidden)
There are many solutions to this, some more convenient than others, and they don't always work.
Here's all you can try, going from 'quick' to 'annoying':
Do File -> Invalidate Caches / Restart and restart PyCharm.
You could also do this after any of the below methods, just to be sure.
First, check which interpreter you're running: Run -> Edit Configurations -> Configuration -> Python Interpreter.
Refresh the paths of your interpreter:
File -> Settings
Project: [name] -> Project Interpreter -> 'Project Interpreter': Gear icon -> More...
Click the 'Show paths' button (bottom one)
Click the 'Refresh' button (bottom one)
Remove the interpreter and add it again:
File -> Settings
Project: [name] -> Project Interpreter -> 'Project Interpreter': Gear icon -> More...
Click the 'Remove' button
Click the 'Add' button and re-add your interpeter
Delete your project preferences
Delete your project's .idea folder
Close and re-open PyCharm
Open your project from scratch
Delete your PyCharm user preferences (but back them up first).
~/.PyCharm50 on Mac
%homepath%/.PyCharm50 on Windows
Switch to another interpreter, then back again to the one you want.
Create a new virtual environment, and switch to that environments' interpreter.
Create a new virtual environment in a new location -- outside of your project folder -- and switch to that environment's interpreter.
Switch to another interpreter altogether; don't switch back.
If you are using Docker, take note:
Make sure you are using pip3 not pip, especially with remote docker and docker-compose interpreters.
Avoid influencing PYTHONPATH. More info here: https://intellij-support.jetbrains.com/hc/en-us/community/posts/115000058690-Module-not-found-in-PyCharm-but-externally-in-Python .
If the above did not work for you, but you did find another trick, then please leave a comment.
In my case it was the directories structure.
My project looks like this:
+---dir_A
+---dir_B
+app
|
\-run.py
So right click on dir_b > "mark directory as" > "project root"
You have to mark your root directory as:
SOURCE ROOT (red),
and your applications:
EXCLUDED ROOT (blue).
Then the unresolved reference will disappear. If you use PyChram pro it do this for you automatically.
I find myself removing and re-adding the remote interpreter to fix this problem when Invalidating Caches or Refreshing Paths does not work.
I use vagrant and every once and awhile if I add a new VM to my multi-vm setup, the forwarded port changes and this seems to confuse PyCharm when it tries to use the wrong port for SSH. Changing the port doesn't seem to help the broken references.
If none of the other solutions work for you, try (backing up) and deleting your ~/.PyCharm40 folder, then reopening PyCharm. This will kill all your preferences as well.
On Mac you want to delete ~/Library/Caches/Pycharm40 and ~/Library/Preferences/PyCharm40.
And on Windows: C:\Users\$USER.PyCharm40.
Tested with PyCharm 4.0.6 (OSX 10.10.3)
following this steps:
Click PyCharm menu.
Select Project Interpreter.
Select Gear icon.
Select More button.
Select Project Interpreter you are in.
Select Directory Tree button.
Select Reload list of paths.
Problem solved!
Sorry to bump this question, however I have an important update to make.
You may also want to revert your project interpreter to to Python 2.7.6 if you're using any other version than that This worked for me on my Ubuntu installation of PyCharm 4.04 professional after none of the other recommendations solved my problem.
Much simpler action:
File > Settings > Project > Project Interpreter
Select "No interpreter" in the "Project interpreter" list
Apply > Set your python interpreter again > Click Apply
Profit - Pycharm is updating skeletons and everything is fine.
If you want to ignore only some "unresolved reference" errors, you can also tell it PyCharm explicitly by placing this in front of your class/method/function:
# noinspection PyUnresolvedReferences
You might try closing Pycharm, deleting the .idea folder from your project, then starting Pycharm again and recreating the project. This worked for me whereas invalidating cache did not.
I finally got this working after none of the proposed solutions worked for me. I was playing with a django rest framework project and was using a virtualenv I had setup with it. I was able to get Pycharm fixed by marking the root folder as the sources root, but then django's server would throw resolve exceptions. So one would work when the other wouldn't and vice versa.
Ultimately I just had to mark the subfolder as the sources root in pycharm. So my structure was like this
-playground
-env
-playground
That second playground folder is the one I had to mark as the sources root for everything to work as expected. That didn't present any issues for my scenario so it was a workable solution.
Just thought I'd share in case someone else can use it.
It could also be a python version issue. I had to pick the right one to make it work.
None of the answers solved my problem.
What did it for me was switching environments and going back to the same environment. File->Settings->Project interpreter
I am using conda environments.
Mine got resolved by checking inherit global site-packages in PyCharm
File -> Settings -> Project Interpreter -> Add Local Interpreter -> Inherit global site-packages
I closed all the other projects and run my required project in isolation in Pycharm. I created a separate virtualenv from pycharm and added all the required modules in it by using pip. I added this virtual environment in project's interpreter. This solved my problem.
Geeze what a nightmare, my amalgamation of different StackOVerflow answers:
Switch to local interpreter /usr/bin/pythonX.X and apply
View paths like above answer
Find skeletons path. Mine was (/home/tim/Desktop/pycharm-community-2016.2.3/helpers/python-skeletons)
Switch back to virt interpreter and add the skeletons path manually if it didn't automatically show up.
None of the above solutions worked for me!
If you are using virtual environment for your project make sure to apply the python.exe file that is inside your virtual environment directory as interpreter for the project (Alt + Ctrl + Shift + S)
this solved the issue for me.
In my case the inspection error shows up due to a very specific case of python code.
A min function that contains two numpy functions and two list accesses makes my code inspection give this kind of errors.
Removing the 'd=0' line in the following example gives an unresolved reference error as expected, but readding doesn't make the error go away for the code inspector. I can still execute the code without problems afterwards.
import numpy as np
def strange(S, T, U, V):
d = 0
print min(np.abs(S[d]), np.abs(T[d]), U[d], V[d])
Clearing caches and reloading list of paths doesn't work. Only altering the code with one of the following example patches does work:
Another ordering of the 'min' parameters: schematically S U T V but not S T U V or T S U V
Using a method instead of the function: S[d].abs() instead of np.abs(S[d])
Using the built-in abs() function
Adding a number to a parameter of choice: U[d] + 0.
My problem is that Flask-WTF is not resolved by PyCharm. I have tried to re-install and then install or Invalidate Cache and Restart PyCharm, but it's still not working.
Then I came up with this solution and it works perfectly for me.
Open Project Interpreter by Ctrl+Alt+S (Windows) and then click Install (+) a new packgage.
Type the package which is not resolved by PyCharm and then click Install Package. Then click OK.
Now, you'll see your library has been resolved.
In PyCharm 2020.1.4 (Community Edition) on Windows 10 10.0. Under Settings in PyCharm: File > Settings > Project Structure
I made two changes in Project Structure:
main folder marked as source and
odoo folder with all applications I excluded
Screenshot shows what I did.
After that I restarted PyCharm: File > Invalidate Caches / Restart...
Unresolved references error was removed
Invalidating the cache as suggested by other answers did not work for me. What I found to be the problem in my case was that PyCharm was marking init.py files of Python packages as text and thus not including them in the analysis which means python resolving was not working correctly.
The solution for me was to:
Open PyCharm settings
Navigate to Editor -> File Types
Find Python and add __init__.py to the list of python files
or Find Text and delete __init__.py from the list of text files
To add yet another one: None of the solutions involving the Python Interpreter tab helped, however, I noticed I had to set Project Dependencies: In the project that had unresolved reference errors, none of the dependencies were checked. Once I checked them, the relevant errors disappeared. I don't know why some are checked to begin with and others are not.
If you are using vagrant the error can be caused by wrong python interpreter.
In our vagrant we are using pyenv so I had to change Python Interpreter path path from /usr/bin/python to /home/vagrant/.pyenv/versions/vagrant/bin/python
I have a project where one file in src/ imports another file in the same directory. To get PyCharm to recognize I had to to go to File > Settings > Project > Project Structure > select src folder and click "Mark as: Sources"
From https://www.jetbrains.com/help/pycharm/configuring-folders-within-a-content-root.html
Source roots contain the actual source files and resources. PyCharm uses the source roots as the starting point for resolving imports
I had to go to File->Invalidate Caches/Restart, reboot Ubuntu 18.04 LTS, then open Pycharm and File-> Invalidate Caches/Restart again before it cleared up.
For me it helped:
update your main directory "mark Directory as" -> "source root"
#kelorek works for me, but before, in interpereter paths I had to add some path.
lets say
from geometry_msgs.msg import Twist
is underline as error, then in remote machine in python run:
help("geometry_msgs")
at the end there will be path lets say :
/opt/ros/foxy/lib/python3.8/site-packages/geometry_msgs/__init__.py
so to Your intepreter pycharm path add
/opt/ros/foxy/lib/python3.8/site-packages
Hope it will help You and it helps me :)
I had the same symptoms. In my instance the problem source was that I had set
idea.max.intellisense.filesize=50 in the custom properties.
I could resolve it by setting it to 100.
Help->Edit Custom Properties
The installation directory is "d:\python2.7", and every time I open IDLE and click on menu File and Open item, the default directory is also "d:\python2.7". So I have to change the directory to where I want.
Is there any way I can change it? Using configuration file or changing environment variable?
I tried to add PYTHONPATH in environment variable, but it doesn't work.
I also import os, and use os.chdir(), but it only changes the working directory, not what I want.
Thank you.
If you're running IDLE from a Windows shortcut, you can just right-click on the shortcut, choose "Properties", and change the field "Start in" to any directory you like.
In response to the answer by Aya:
If you're running IDLE from a Windows shortcut, you can just right-click on the shortcut, choose "Properties", and change the field "Start in" to any directory you like.
Yes you can, however Python IDLE will no longer run. I've found that if the Start In directory for the IDLE shortcut is C:\Python33 or C:\Python33\Lib\idlelib (in my case) that it will still work but if I added a new directory below either of these (for example: myfiles) containing my programs then the IDLE editor fails. In my situation, I've spend days now trying to get Python to easily get to my .py programs by clicking FILE+OPEN in the IDLE editor. Also, I've tried everything to get IDLE to run without failing from the Windows Explorer using right click and selecting "edit with IDLE" but although Idle does opens okay trying to RUN a program from there fails. I did manage to get IDLE to work using SEND TO and until I get an answer to my IDLE issue Post that is what I suppose I will have to do. Hope this helps.
Open the idle or PyShell
press Alt + M or File -> open Module
type in idlelib.IOBinding
the window opens, go to line 185
change either 'dirname = None' or 'filename = None' to the value you desire.
Eventually you need to start the PyShell or the editor with rights to edit this module like
sudo idle
if you can not edit it you need to see idle.pyw in the same directory an trace how IOBinding is used by the idlelib.PyShell.main() function and change the same variable.
I just configured Eclipse with PyDev latest version, but when I import external modules, neither code completion nor syntax highlighting works. How do I enable it?
Komodo Edit does a better synax highlighting, apparently. - But Ctrl+R doesnt run the program.
I prefer a SciTE kind of editor with similar highlighting and fonts (aesthetics) and F5 working but with display of folder and files dynamically like Komodo Edit and a better code completion and vi emulation. Suggestions, please.
If I want to buy a Py IDE, Komodo or Wingware, which is better?-- Wrt syntax highlighting and code completion
To enable code completion, go to Window > Preferences > Pydev > Editor > Code Completion, and check the 'Use Code Completion?' box, as well as the other boxes for what you want to complete on. It seems to take a second to load, the first time it has to complete something.
Syntax coloring should just work by default. Right-click on the file in the package explorer, go to 'Open With', and make sure you're opening it with the Python Editor, and not the regular Text Editor.
I don't know exactly what you mean by importing external modules. I have my source in a separate directory structure on disk; my PyDev projects contain folders linked to those. Code completion works for that, as well as other modules like 'os'. If you're having troubles, are the modules added to the PyDev's Python search path (not necessarily the same as the regular one)?
I took a brief look at Komodo and Wingware a while back, so I can't answer the second part of your question. But ended up going with PyDev. I'm not a big fan of Eclipse, but PyDev works reasonably well for me.
The typical reason that code completion doesn't work under PyDev is that the libraries aren't in the PYTHONPATH. If you go into the Project Properties, and setup PyDev PYTHONPATH preferences to include the places where the code you are trying to complete lives, it will work just fine...
Project > Properties > PyDev-PYTHONPAH > click 'Add source folder'
Make sure you use 'Open With' as 'Python Editor' by right clicking on the file - It worked for me
Check to see if the 'P' icon is appearing for your items and in the top of your editor after opening it. If it's not appearing, it may be that there's a problem with the file association, so, go to window > preferences > general > editors > file associations and make sure that the .py files are associated with the Python Editor (note that because of an eclipse bug, if it seems correct, you may have to remove the association and add it again)
It sounds like you have to specify the location of the Python interpreter. Do this under Preferences > Pydev > Interpreter - Python. Create a new interpreter and point it to the Python interpreter executable.
Well, I tried the Wing Professional and I think its really the best Py IDE out there.
Between komodo and wingide i would go for wing. The license is not that expensive and the fact that it is commercial gives you a bigger probability of more updates and bug fixes. If you, like me, prefer a free solution, then stick with pydev. At least until aptana closes the free door :)
Check your Theme configuration. Python highlighting uses Theme Colors
In case anyone else makes the embarrassing mistake that I did: be sure your source code file actually ends with ".py". Even if its in a Python project, PyDev won't guess without the extension.
If you want to work with Eclipse please have a look at these pluggins.
-To make your eclipse editor work like vim. I use this plugin.
http://vrapper.sourceforge.net/home/
-Then if you do something with HTML,CSS etc. This plug in might be useful.
https://github.com/emmetio/emmet-eclipse
If you are looking for a Text editor. I suggest you to use:-
Either Notepad++ (in Windows)
- with plugins like - ViSimulator
- Emmet
- Explorer
- Python Script
- NppExec
Kate(KDE Advanced Text editro),[In Linux],
which have vim mode and many features. In my view, it has better syntax support too. I am not sure it have pluggins or not.
I am sure you have read the answers of DNS and tim-white
When syntax highlighting was not working for me using PyDev, I discovered that there were somehow two 'Python Editor' associations defined for .py files in my installation of Eclipse/PyDev. From the Eclipse Main Menu, go to Window > Preferences > General > Editors > FileAssociations to see the file extension <-> editor mapping. I set a different one as default for .py files at the bottom of the dialog, and got syntax highlighting working again.