Related
Python is installed in a local directory.
My directory tree looks like this:
(local directory)/site-packages/toolkit/interface.py
My code is in here:
(local directory)/site-packages/toolkit/examples/mountain.py
To run the example, I write python mountain.py, and in the code I have:
from toolkit.interface import interface
And I get the error:
Traceback (most recent call last):
File "mountain.py", line 28, in ?
from toolkit.interface import interface
ImportError: No module named toolkit.interface
I have already checked sys.path and there I have the directory /site-packages. Also, I have the file __init__.py.bin in the toolkit folder to indicate to Python that this is a package. I also have a __init__.py.bin in the examples directory.
I do not know why Python cannot find the file when it is in sys.path. Any ideas? Can it be a permissions problem? Do I need some execution permission?
Based on your comments to orip's post, I guess this is what happened:
You edited __init__.py on windows.
The windows editor added something non-printing, perhaps a carriage-return (end-of-line in Windows is CR/LF; in unix it is LF only), or perhaps a CTRL-Z (windows end-of-file).
You used WinSCP to copy the file to your unix box.
WinSCP thought: "This has something that's not basic text; I'll put a .bin extension to indicate binary data."
The missing __init__.py (now called __init__.py.bin) means python doesn't understand toolkit as a package.
You create __init__.py in the appropriate directory and everything works... ?
Does
(local directory)/site-packages/toolkit
have a __init__.py?
To make import walk through your directories every directory must have a __init__.py file.
I ran into something very similar when I did this exercise in LPTHW; I could never get Python to recognise that I had files in the directory I was calling from. But I was able to get it to work in the end. What I did, and what I recommend, is to try this:
(NOTE: From your initial post, I am assuming you are using an *NIX-based machine and are running things from the command line, so this advice is tailored to that. Since I run Ubuntu, this is what I did)
Change directory (cd) to the directory above the directory where your files are. In this case, you're trying to run the mountain.py file, and trying to call the toolkit.interface.py module, which are in separate directories. In this case, you would go to the directory that contains paths to both those files (or in other words, the closest directory that the paths of both those files share). Which in this case is the toolkit directory.
When you are in the toolkit directory, enter this line of code on your command line:
export PYTHONPATH=.
This sets your PYTHONPATH to ".", which basically means that your PYTHONPATH will now look for any called files within the directory you are currently in, (and more to the point, in the sub-directory branches of the directory you are in. So it doesn't just look in your current directory, but in all the directories that are in your current directory).
After you've set your PYTHONPATH in the step above, run your module from your current directory (the toolkit directory). Python should now find and load the modules you specified.
On *nix, also make sure that PYTHONPATH is configured correctly, especially that it has this format:
.:/usr/local/lib/python
(Mind the .: at the beginning, so that it can search on the current directory, too.)
It may also be in other locations, depending on the version:
.:/usr/lib/python
.:/usr/lib/python2.6
.:/usr/lib/python2.7 and etc.
You are reading this answer says that your __init__.py is in the right place, you have installed all the dependencies and you are still getting the ImportError.
I was facing a similar issue except that my program would run fine when ran using PyCharm but the above error when I would run it from the terminal. After digging further, I found out that PYTHONPATH didn't have the entry for the project directory. So, I set PYTHONPATH per Import statement works on PyCharm but not from terminal:
export PYTHONPATH=$PYTHONPATH:`pwd` (OR your project root directory)
There's another way to do this using sys.path as:
import sys
sys.path.insert(0,'<project directory>') OR
sys.path.append('<project directory>')
You can use insert/append based on the order in which you want your project to be searched.
Using PyCharm (part of the JetBrains suite) you need to define your script directory as Source:
Right Click > Mark Directory as > Sources Root
For me, it was something really stupid. I installed the library using pip3 install but was running my program as python program.py as opposed to python3 program.py.
I solved my own problem, and I will write a summary of the things that were wrong and the solution:
The file needs to be called exactly __init__.py. If the extension is different such as in my case .py.bin then Python cannot move through the directories and then it cannot find the modules. To edit the files you need to use a Linux editor, such as vi or nano. If you use a Windows editor this will write some hidden characters.
Another problem that was affecting it was that I had another Python version installed by the root, so if someone is working with a local installation of python, be sure that the Python installation that is running the programs is the local Python. To check this, just do which python, and see if the executable is the one that is in your local directory. If not, change the path, but be sure that the local Python directory is before than the other Python.
To mark a directory as a package you need a file named __init__.py, does this help?
an easy solution is to install the module using python -m pip install <library-name> instead of pip install <library-name>
you may use sudo in case of admin restrictions
To all those who still have this issue. I believe Pycharm gets confused with imports. For me, when i write 'from namespace import something', the previous line gets underlined in red, signaling that there is an error, but works. However ''from .namespace import something' doesn't get underlined, but also doesn't work.
Try
try:
from namespace import something
except NameError:
from .namespace import something
Yup. You need the directory to contain the __init__.py file, which is the file that initializes the package. Here, have a look at this.
The __init__.py files are required to make Python treat the directories as containing packages; this is done to prevent directories with a common name, such as string, from unintentionally hiding valid modules that occur later on the module search path. In the simplest case, __init__.py can just be an empty file, but it can also execute initialization code for the package or set the __all__ variable, described later.
If you have tried all methods provided above but failed, maybe your module has the same name as a built-in module. Or, a module with the same name existing in a folder that has a high priority in sys.path than your module's.
To debug, say your from foo.bar import baz complaints ImportError: No module named bar. Changing to import foo; print foo, which will show the path of foo. Is it what you expect?
If not, Either rename foo or use absolute imports.
You must have the file __ init__.py in the same directory where it's the file that you are importing.
You can not try to import a file that has the same name and be a file from 2 folders configured on the PYTHONPATH.
eg:
/etc/environment
PYTHONPATH=$PYTHONPATH:/opt/folder1:/opt/folder2
/opt/folder1/foo
/opt/folder2/foo
And, if you are trying to import foo file, python will not know which one you want.
from foo import ... >>> importerror: no module named foo
My two cents:
Spit:
Traceback (most recent call last):
File "bash\bash.py", line 454, in main
import bosh
File "Wrye Bash Launcher.pyw", line 63, in load_module
mod = imp.load_source(fullname,filename+ext,fp)
File "bash\bosh.py", line 69, in <module>
from game.oblivion.RecordGroups import MobWorlds, MobDials, MobICells, \
ImportError: No module named RecordGroups
This confused the hell out of me - went through posts and posts suggesting ugly syspath hacks (as you see my __init__.py were all there). Well turns out that game/oblivion.py and game/oblivion was confusing python
which spit out the rather unhelpful "No module named RecordGroups". I'd be interested in a workaround and/or links documenting this (same name) behavior -> EDIT (2017.01.24) - have a look at What If I Have a Module and a Package With The Same Name? Interestingly normally packages take precedence but apparently our launcher violates this.
EDIT (2015.01.17): I did not mention we use a custom launcher dissected here.
Fixed my issue by writing print (sys.path) and found out that python was using out of date packages despite a clean install. Deleting these made python automatically use the correct packages.
In my case, because I'm using PyCharm and PyCharm create a 'venv' for every project in project folder, but it is only a mini env of python. Although you have installed the libraries you need in Python, but in your custom project 'venv', it is not available. This is the real reason of 'ImportError: No module named xxxxxx' occurred in PyCharm.
To resolve this issue, you must add libraries to your project custom env by these steps:
In PyCharm, from menu 'File'->Settings
In Settings dialog, Project: XXXProject->Project Interpreter
Click "Add" button, it will show you 'Available Packages' dialog
Search your library, click 'Install Package'
Then, all you needed package will be installed in you project custom 'venv' folder.
Enjoy.
Linux: Imported modules are located in /usr/local/lib/python2.7/dist-packages
If you're using a module compiled in C, don't forget to chmod the .so file after sudo setup.py install.
sudo chmod 755 /usr/local/lib/python2.7/dist-packages/*.so
In my case, the problem was I was linking to debug python & boost::Python, which requires that the extension be FooLib_d.pyd, not just FooLib.pyd; renaming the file or updating CMakeLists.txt properties fixed the error.
My problem was that I added the directory with the __init__.py file to PYTHONPATH, when actually I needed to add its parent directory.
If you are using a setup script/utility (e.g. setuptools) to deploy your package, don't forget to add the respective files/modules to the installer.
When supported, use find_packages() or similar to automatically add new packages to the setup script. This will absolutely save you from a headache, especially if you put your project aside for some time and then add something later on.
import setuptools
setuptools.setup(
name="example-pkg",
version="0.0.1",
author="Example Author",
author_email="author#example.com",
description="A small example package",
packages=setuptools.find_packages(),
classifiers=[
"Programming Language :: Python :: 3",
"Operating System :: OS Independent",
],
python_requires='>=3.6',
)
(Example taken from setuptools documentation)
For me, running the file as a module helped.
Instead of
python myapp/app.py
using
python -m myapp.app
It's not exactly the same but it might be a better approach in some cases.
I had the same problem (Python 2.7 Linux), I have found the solution and i would like to share it. In my case i had the structure below:
Booklet
-> __init__.py
-> Booklet.py
-> Question.py
default
-> __init_.py
-> main.py
In 'main.py' I had tried unsuccessfully all the combinations bellow:
from Booklet import Question
from Question import Question
from Booklet.Question import Question
from Booklet.Question import *
import Booklet.Question
# and many othet various combinations ...
The solution was much more simple than I thought. I renamed the folder "Booklet" into "booklet" and that's it. Now Python can import the class Question normally by using in 'main.py' the code:
from booklet.Booklet import Booklet
from booklet.Question import Question
from booklet.Question import AnotherClass
From this I can conclude that Package-Names (folders) like 'booklet' must start from lower-case, else Python confuses it with Class names and Filenames.
Apparently, this was not your problem, but John Fouhy's answer is very good and this thread has almost anything that can cause this issue. So, this is one more thing and I hope that maybe this could help others.
In linux server try dos2unix script_name
(remove all (if there is any) pyc files with command find . -name '*.pyc' -delete)
and re run in the case if you worked on script on windows
In my case, I was using sys.path.insert() to import a local module and was getting module not found from a different library. I had to put sys.path.insert() below the imports that reported module not found. I guess the best practice is to put sys.path.insert() at the bottom of your imports.
I've found that changing the name (via GUI) of aliased folders (Mac) can cause issues with loading modules. If the original folder name is changed, remake the symbolic link. I'm unsure how prevalent this behavior may be, but it was frustrating to debug.
another cause makes this issue
file.py
#!/bin/python
from bs4 import BeautifulSoup
if your default python is pyyhon2
$ file $(which python)
/sbin/python: symbolic link to python2
file.py need python3, for this case(bs4)
you can not execute this module with python2 like this:
$ python file.py
# or
$ file.py
# or
$ file.py # if locate in $PATH
Tow way to fix this error,
# should be to make python3 as default by symlink
$ rm $(which python) && ln -s $(which python3) /usr/bin/python
# or use alias
alias python='/usr/bin.../python3'
or change shebang in file.py to
#!/usr/bin/...python3
After just suffering the same issue I found my resolution was to delete all pyc files from my project, it seems like these cached files were somehow causing this error.
Easiest way I found to do this was to navigate to my project folder in Windows explorer and searching for *.pyc, then selecting all (Ctrl+A) and deleting them (Ctrl+X).
Its possible I could have resolved my issues by just deleting the specific pyc file but I never tried this
I faced the same problem: Import error. In addition the library've been installed 100% correctly. The source of the problem was that on my PC 3 version of python (anaconda packet) have been installed). This is why the library was installed no to the right place. After that I just changed to the proper version of python in the my IDE PyCharm.
I had the same error. It was caused by somebody creating a folder in the same folder as my script, the name of which conflicted with a module I was importing from elsewhere. Instead of importing the external module, it looked inside this folder which obviously didn't contain the expected modules.
I'm currently trying to import one of my modules from a different folder.
Like this...
from Assets.resources.libs.pout import Printer, ForeColor, BackColor
This import method works completely fine in PyCharm, however, when i try to launch the file in cmd or IDLE, i get this error.
ModuleNotFoundError: No module named 'Assets'
This is my file structure from main.py to pout.py:
- Assets
- main.py
- resources
- libs
- pout.py
Any clue about how i could fix this ?
Any help is appreciated !
Edit: The original answer was based on the assumption that the script you're running is within the folder structure given, which a re-read tells me may not be true. The general solution is to do
sys.path.append('path_to_Assets')
but read below for more detail.
Original answer
The paths that modules can be loaded from will differ between the two methods of running the script.
If you add
import sys
print(sys.path)
to the top of your script before the imports you should be able to see the difference.
When you run it yourself the first entry will be the location of the script itself, followed by various system/environment paths. When you run it in PyCharm you will see the same first entry, followed by an entry for the top level of the project. This is how it finds the modules when run from PyCharm. This behaviour is controlled by the "Add content roots to PYTHONPATH" option in the run configuration.
Adding this path programmatically in a way that will work in all situations isn't trivial because, unlike PyCharm, your script doesn't have a concept of where the top level should be. BUT if you know you'll be running the script from the top level, i.e. your working directory will be the folder containing Assets and you're running something like python Assets/main.py then you can do
sys.path.append(os.path.abspath('.'))
and that will add the correct folder to the path.
Appending sys path didn't work for me on windows, hence here is the solution that worked for me:
Add an empty __init__.py file to each directory
i.e. in Assets, resources, libs.
Then try importing with only the base package names.
Worked for me!
Python is installed in a local directory.
My directory tree looks like this:
(local directory)/site-packages/toolkit/interface.py
My code is in here:
(local directory)/site-packages/toolkit/examples/mountain.py
To run the example, I write python mountain.py, and in the code I have:
from toolkit.interface import interface
And I get the error:
Traceback (most recent call last):
File "mountain.py", line 28, in ?
from toolkit.interface import interface
ImportError: No module named toolkit.interface
I have already checked sys.path and there I have the directory /site-packages. Also, I have the file __init__.py.bin in the toolkit folder to indicate to Python that this is a package. I also have a __init__.py.bin in the examples directory.
I do not know why Python cannot find the file when it is in sys.path. Any ideas? Can it be a permissions problem? Do I need some execution permission?
Based on your comments to orip's post, I guess this is what happened:
You edited __init__.py on windows.
The windows editor added something non-printing, perhaps a carriage-return (end-of-line in Windows is CR/LF; in unix it is LF only), or perhaps a CTRL-Z (windows end-of-file).
You used WinSCP to copy the file to your unix box.
WinSCP thought: "This has something that's not basic text; I'll put a .bin extension to indicate binary data."
The missing __init__.py (now called __init__.py.bin) means python doesn't understand toolkit as a package.
You create __init__.py in the appropriate directory and everything works... ?
Does
(local directory)/site-packages/toolkit
have a __init__.py?
To make import walk through your directories every directory must have a __init__.py file.
I ran into something very similar when I did this exercise in LPTHW; I could never get Python to recognise that I had files in the directory I was calling from. But I was able to get it to work in the end. What I did, and what I recommend, is to try this:
(NOTE: From your initial post, I am assuming you are using an *NIX-based machine and are running things from the command line, so this advice is tailored to that. Since I run Ubuntu, this is what I did)
Change directory (cd) to the directory above the directory where your files are. In this case, you're trying to run the mountain.py file, and trying to call the toolkit.interface.py module, which are in separate directories. In this case, you would go to the directory that contains paths to both those files (or in other words, the closest directory that the paths of both those files share). Which in this case is the toolkit directory.
When you are in the toolkit directory, enter this line of code on your command line:
export PYTHONPATH=.
This sets your PYTHONPATH to ".", which basically means that your PYTHONPATH will now look for any called files within the directory you are currently in, (and more to the point, in the sub-directory branches of the directory you are in. So it doesn't just look in your current directory, but in all the directories that are in your current directory).
After you've set your PYTHONPATH in the step above, run your module from your current directory (the toolkit directory). Python should now find and load the modules you specified.
On *nix, also make sure that PYTHONPATH is configured correctly, especially that it has this format:
.:/usr/local/lib/python
(Mind the .: at the beginning, so that it can search on the current directory, too.)
It may also be in other locations, depending on the version:
.:/usr/lib/python
.:/usr/lib/python2.6
.:/usr/lib/python2.7 and etc.
You are reading this answer says that your __init__.py is in the right place, you have installed all the dependencies and you are still getting the ImportError.
I was facing a similar issue except that my program would run fine when ran using PyCharm but the above error when I would run it from the terminal. After digging further, I found out that PYTHONPATH didn't have the entry for the project directory. So, I set PYTHONPATH per Import statement works on PyCharm but not from terminal:
export PYTHONPATH=$PYTHONPATH:`pwd` (OR your project root directory)
There's another way to do this using sys.path as:
import sys
sys.path.insert(0,'<project directory>') OR
sys.path.append('<project directory>')
You can use insert/append based on the order in which you want your project to be searched.
Using PyCharm (part of the JetBrains suite) you need to define your script directory as Source:
Right Click > Mark Directory as > Sources Root
For me, it was something really stupid. I installed the library using pip3 install but was running my program as python program.py as opposed to python3 program.py.
I solved my own problem, and I will write a summary of the things that were wrong and the solution:
The file needs to be called exactly __init__.py. If the extension is different such as in my case .py.bin then Python cannot move through the directories and then it cannot find the modules. To edit the files you need to use a Linux editor, such as vi or nano. If you use a Windows editor this will write some hidden characters.
Another problem that was affecting it was that I had another Python version installed by the root, so if someone is working with a local installation of python, be sure that the Python installation that is running the programs is the local Python. To check this, just do which python, and see if the executable is the one that is in your local directory. If not, change the path, but be sure that the local Python directory is before than the other Python.
To mark a directory as a package you need a file named __init__.py, does this help?
an easy solution is to install the module using python -m pip install <library-name> instead of pip install <library-name>
you may use sudo in case of admin restrictions
To all those who still have this issue. I believe Pycharm gets confused with imports. For me, when i write 'from namespace import something', the previous line gets underlined in red, signaling that there is an error, but works. However ''from .namespace import something' doesn't get underlined, but also doesn't work.
Try
try:
from namespace import something
except NameError:
from .namespace import something
Yup. You need the directory to contain the __init__.py file, which is the file that initializes the package. Here, have a look at this.
The __init__.py files are required to make Python treat the directories as containing packages; this is done to prevent directories with a common name, such as string, from unintentionally hiding valid modules that occur later on the module search path. In the simplest case, __init__.py can just be an empty file, but it can also execute initialization code for the package or set the __all__ variable, described later.
If you have tried all methods provided above but failed, maybe your module has the same name as a built-in module. Or, a module with the same name existing in a folder that has a high priority in sys.path than your module's.
To debug, say your from foo.bar import baz complaints ImportError: No module named bar. Changing to import foo; print foo, which will show the path of foo. Is it what you expect?
If not, Either rename foo or use absolute imports.
You must have the file __ init__.py in the same directory where it's the file that you are importing.
You can not try to import a file that has the same name and be a file from 2 folders configured on the PYTHONPATH.
eg:
/etc/environment
PYTHONPATH=$PYTHONPATH:/opt/folder1:/opt/folder2
/opt/folder1/foo
/opt/folder2/foo
And, if you are trying to import foo file, python will not know which one you want.
from foo import ... >>> importerror: no module named foo
My two cents:
Spit:
Traceback (most recent call last):
File "bash\bash.py", line 454, in main
import bosh
File "Wrye Bash Launcher.pyw", line 63, in load_module
mod = imp.load_source(fullname,filename+ext,fp)
File "bash\bosh.py", line 69, in <module>
from game.oblivion.RecordGroups import MobWorlds, MobDials, MobICells, \
ImportError: No module named RecordGroups
This confused the hell out of me - went through posts and posts suggesting ugly syspath hacks (as you see my __init__.py were all there). Well turns out that game/oblivion.py and game/oblivion was confusing python
which spit out the rather unhelpful "No module named RecordGroups". I'd be interested in a workaround and/or links documenting this (same name) behavior -> EDIT (2017.01.24) - have a look at What If I Have a Module and a Package With The Same Name? Interestingly normally packages take precedence but apparently our launcher violates this.
EDIT (2015.01.17): I did not mention we use a custom launcher dissected here.
Fixed my issue by writing print (sys.path) and found out that python was using out of date packages despite a clean install. Deleting these made python automatically use the correct packages.
In my case, because I'm using PyCharm and PyCharm create a 'venv' for every project in project folder, but it is only a mini env of python. Although you have installed the libraries you need in Python, but in your custom project 'venv', it is not available. This is the real reason of 'ImportError: No module named xxxxxx' occurred in PyCharm.
To resolve this issue, you must add libraries to your project custom env by these steps:
In PyCharm, from menu 'File'->Settings
In Settings dialog, Project: XXXProject->Project Interpreter
Click "Add" button, it will show you 'Available Packages' dialog
Search your library, click 'Install Package'
Then, all you needed package will be installed in you project custom 'venv' folder.
Enjoy.
Linux: Imported modules are located in /usr/local/lib/python2.7/dist-packages
If you're using a module compiled in C, don't forget to chmod the .so file after sudo setup.py install.
sudo chmod 755 /usr/local/lib/python2.7/dist-packages/*.so
In my case, the problem was I was linking to debug python & boost::Python, which requires that the extension be FooLib_d.pyd, not just FooLib.pyd; renaming the file or updating CMakeLists.txt properties fixed the error.
My problem was that I added the directory with the __init__.py file to PYTHONPATH, when actually I needed to add its parent directory.
For me, running the file as a module helped.
Instead of
python myapp/app.py
using
python -m myapp.app
It's not exactly the same but it might be a better approach in some cases.
If you are using a setup script/utility (e.g. setuptools) to deploy your package, don't forget to add the respective files/modules to the installer.
When supported, use find_packages() or similar to automatically add new packages to the setup script. This will absolutely save you from a headache, especially if you put your project aside for some time and then add something later on.
import setuptools
setuptools.setup(
name="example-pkg",
version="0.0.1",
author="Example Author",
author_email="author#example.com",
description="A small example package",
packages=setuptools.find_packages(),
classifiers=[
"Programming Language :: Python :: 3",
"Operating System :: OS Independent",
],
python_requires='>=3.6',
)
(Example taken from setuptools documentation)
I had the same problem (Python 2.7 Linux), I have found the solution and i would like to share it. In my case i had the structure below:
Booklet
-> __init__.py
-> Booklet.py
-> Question.py
default
-> __init_.py
-> main.py
In 'main.py' I had tried unsuccessfully all the combinations bellow:
from Booklet import Question
from Question import Question
from Booklet.Question import Question
from Booklet.Question import *
import Booklet.Question
# and many othet various combinations ...
The solution was much more simple than I thought. I renamed the folder "Booklet" into "booklet" and that's it. Now Python can import the class Question normally by using in 'main.py' the code:
from booklet.Booklet import Booklet
from booklet.Question import Question
from booklet.Question import AnotherClass
From this I can conclude that Package-Names (folders) like 'booklet' must start from lower-case, else Python confuses it with Class names and Filenames.
Apparently, this was not your problem, but John Fouhy's answer is very good and this thread has almost anything that can cause this issue. So, this is one more thing and I hope that maybe this could help others.
In linux server try dos2unix script_name
(remove all (if there is any) pyc files with command find . -name '*.pyc' -delete)
and re run in the case if you worked on script on windows
In my case, I was using sys.path.insert() to import a local module and was getting module not found from a different library. I had to put sys.path.insert() below the imports that reported module not found. I guess the best practice is to put sys.path.insert() at the bottom of your imports.
I've found that changing the name (via GUI) of aliased folders (Mac) can cause issues with loading modules. If the original folder name is changed, remake the symbolic link. I'm unsure how prevalent this behavior may be, but it was frustrating to debug.
another cause makes this issue
file.py
#!/bin/python
from bs4 import BeautifulSoup
if your default python is pyyhon2
$ file $(which python)
/sbin/python: symbolic link to python2
file.py need python3, for this case(bs4)
you can not execute this module with python2 like this:
$ python file.py
# or
$ file.py
# or
$ file.py # if locate in $PATH
Tow way to fix this error,
# should be to make python3 as default by symlink
$ rm $(which python) && ln -s $(which python3) /usr/bin/python
# or use alias
alias python='/usr/bin.../python3'
or change shebang in file.py to
#!/usr/bin/...python3
After just suffering the same issue I found my resolution was to delete all pyc files from my project, it seems like these cached files were somehow causing this error.
Easiest way I found to do this was to navigate to my project folder in Windows explorer and searching for *.pyc, then selecting all (Ctrl+A) and deleting them (Ctrl+X).
Its possible I could have resolved my issues by just deleting the specific pyc file but I never tried this
I faced the same problem: Import error. In addition the library've been installed 100% correctly. The source of the problem was that on my PC 3 version of python (anaconda packet) have been installed). This is why the library was installed no to the right place. After that I just changed to the proper version of python in the my IDE PyCharm.
I had the same error. It was caused by somebody creating a folder in the same folder as my script, the name of which conflicted with a module I was importing from elsewhere. Instead of importing the external module, it looked inside this folder which obviously didn't contain the expected modules.
Out of nowhere my scripts aren't finding locations anymore, that worked previously.
The only thing i changed was to add a environmental variable in Windows because i didn't get access python via the command line. But also after deleting it and resetting the "PATH" variable the problem is the same.
The error only occurs for modules in my project directory which i import via "from... import..."
no problem with "import sys" and so on.
I don't understand what's going on. I use eclipse and Python 2.7.
Update: I "auto configured" in the interpreter menu so that PYTHONPATH was rebuilt, i used File-->Restart but i won't damn work! I even removed the system environmental variable from windows. What is wrong with my setup?
Update2: Now i even reinstalled Eclipse but the f***ing errormessage is still there. It's driving me crazy! Anybody with more tips?
Update3: The problem occured after my laptop shut down because the battery was low. During that it was executing a script. Maybe it has sth. to do with the forced shutdown.
Ok, i found the solution.
Somehow the inner structure of my project got messed up, that the relative path in "from main.path1.path2 import ..." wasn't valid anymore.
Either it worked like "from path1.path2 import..." or (what i did) I created a project and included again the folder structure, but in the way that it works.
Currently, when trying to reference some library code, I'm doing this at the top of my python file:
import sys
sys.path.append('''C:\code\my-library''')
from my-library import my-library
Then, my-library will be part of sys.path for as long as the session is active. If I start a new file, I have to remember to include sys.path.append again.
I feel like there must be a much better way of doing this. How can I make my-library available to every python script on my windows machine without having to use sys.path.append each time?
Simply add this path to your PYTHONPATH environment variable. To do this, go to Control Panel / System / Advanced / Environment variable, and in the "User variables" sections, check if you already have PYTHONPATH. If yes, select it and click "Edit", if not, click "New" to add it.
Paths in PYTHONPATH should be separated with ";".
You should use
os.path.join
to make your code more reliable.
You have already used __my-library__ in the path. So don't use it the second time in import.
If you have a directory structure like this
C:\code\my-library\lib.py and a function in there, e.g.:
def main():
print("Hello, world")
then your resulting code should be
import sys
sys.path.append(os.path.join('C:/', 'code', 'my-library'))
from lib import main
If this is a library that you use throughout your code, you should install it as such. Package it up properly, and either install it in your site-packages directory - or, if it's specific to certain projects, use virtualenv and install it just within the relevant virtualenvs.
To do such a thing, you'll have to use a sitecustomize.py (or usercustomize.py) file where you'll do your sys.path modifications (source python docs).
Create the sitecustomize.py file into the \Lib\site-packages directory of your python installation, and it will be imported each time a python interpreter is launched.
If you are doing this interactively, the best thing to do would be to install ipython and configure your startup settings to include that code. If you intend to have it be part of a script you run from the interpreter, the same thing applies, since it will have access to your namespace.
On the other hand, a stand alone script should not include that automatically. In the future, you or some other maintainer will come along, and all the code should be obvious, and not dependent upon a specific machine setup. The best thing to do would be to set up a skeleton file for new projects that includes all of the basic functionality you need. That, along with oft-used snippets will handle the problem.
All of your code to run the script, will be in the script, and you won't have to think about adding that code every time.
Using jupyter with multiple environments, adding the path to .bashrc didn't work. I had to edit the kernel.json file for that particular kernel and append it to the PYTHONPATH in env section.
This only worked in that kernel but maybe this can help someone else.