I have Django project which uses postgresql 9. I installed psycopg2 and when I run project I receive 'Error loading psycopg2 module: dll load failed'. I met this issue for the first time. I have windows 7 x64 with python2.7. How can I solve this one?
I had the same problem, it was that psycopg2 does not install well in Windows with _easy_install_, I followed the instructions on the follow SO answer:
Installing psycopg2 (postgresql) in virtualenv on windows
You need to manually install the psycopg2 exe file:
psycopg2-2.4.2.win-amd64-py2.7-pg9.0.4-release.exe
I know this is going to haunt me again or as nwcell puts it:
Every time I need to set up psycopg2 on windows, I wind up wanting to shoot something.
I actually have a machine with it working and I've been at pains to setup another machine. I installed Python 3.8 and the old PC has 3.7.4. The main difference was the file:
C:\project\venv\Lib\site-packages\psycopg2_psycopg.cp37-win32.pyd
On the new PC it was showing as AMD64. I eventually uninstalled 3.8 and reverted back to 3.7.4, then I copied the files from the old PC to the new and then I hit this error:
https://stackoverflow.com/a/37819509/495455
Going to a WayBackMachine version of the stickpeople:
https://web.archive.org/web/20191003103502/http://www.stickpeople.com/projects/python/win-psycopg/
I didn't install the exe, I simply did a pip install -Iv psycopg2-binary==2.8.4 at which point it started working. So I'm thinking the latest version doesn't work, for me 2.8.4 still works: https://pypi.org/project/psycopg2/#files
It's something to do with x64 as everything I tried with AMD64 didn't work and I spent ages on it.
Related
First of all, thank you very much for reading.
Some days ago I installed Python3 (3.6.9) and opencv 3.4.10 in an Ubuntu 18.04 desktop system. I needed to downgrade opencv to 3.4.0 after some compilation problems (not related to python3), so I removed opencv 3.4.10 by using the sudo make uninstall order, and tested that it was uninstalled as if I tried importing it in python I got the following error:
libopencv_hfs.so.3.4: cannot open shared object file: no such file or directory
I thought installing 3.4.0 version would solve the problem but now that it's installed, when I try to import it in a python3 script I am getting the same error. I think this error must be related to the way python3 references the import files. I think it's still pointing to the uninstalled version of 3.4.10, but I can not find the way to change it.
Could someone please help me with this issue?
Thank you very much.
Andrés.
Using a virtualenv would resolve the issue. Check this out on how to use : Installing packages using pip and virtual environments
Once you're done installing requirements in the virtualenv, run your python script there only to use the specified versions.
Hello again and thank you for you answers.
I have been able to solve the problem. Thought I had uninstalled the previous version of opencv, there was still a cv2.sofile in my python virtual environment path, and it had not been replaced by the new cv2.so, so python tried to import the old one instead of the new one.
The old cv2.so (the one that was referenced when I imported cv2 in python) was here --> ~/.virtualenvs/cv/lib/python3.6/site-packages/cv2.so
The cv2.so I wanted to be used when imported was here --> /usr/local/lib/python3.6/site-packages/cv2/cv2.so so I replaced the one in the virtual environment path with the one in the lib directory and that did the trick :)
I used to create a big program in Python 2.7 that uses MySQLdb a long time ago. I developed it both on Mac OS and PC.
I just had to re-refomat my Mac and I'm now on Mojave. Whereas I have been able in the past to easily install MySQLdb, I'm unable to do so now.
I've tried all that was available on the forums with no success.
PIP, easy-install, Brew and many other solutions that I forgot.
Even "easy_install MySQL-python" found in Installing MySQLDB on Python 2.7.3 under CentOS gave me an error ending by :
EnvironmentError: mysql_config not found
I expect to be able to "import MySQLdb" in my Python code, but MySQLdb isn't installed and so "no found"
Thanks a lot for your help.
So, you either have upgrade your MySQL Version to a 64Bit Version, get the newest MySQL-Python Connector, update your code and use this instead of MySQLdb. Which is the safest and best solution, but u have to put in some work (no problem if your code isn't that long anyways...)
https://dev.mysql.com/downloads/connector/python/
https://dev.mysql.com/doc/connector-python/en/connector-python-example-connecting.html
import mysql.connector
Second chance is, staying with your old 32Bit MySQL Version (for Example 5.6.20 32Bit), and still using the same old MySQL Python Connector (For Example Mysql-Python Connector 1.2.3 in 32Bit, found on the Mysql Download page aswell) you used before. There will be some popup errors, such as a few Libraries are out of date and probably not compatible anymore, but it's working.
I have a situation very much like the one at Error "ImportError: DLL load failed: %1 is not a valid Win32 application", but the answer there isn't working for me.
My Python code says:
import cv2
But that line throws the error shown in the title of this question.
I have OpenCV installed in C:\lib\opencv on this 64-bit machine. I'm using 64-bit Python.
My PYTHONPATH variable: PYTHONPATH=C:\lib\opencv\build\python\2.7. This folder contains cv2.pyd and that's all.
My PATH variable: Path=%OPENCV_DIR%\bin;... This folder contains 39 DLL files such as opencv_core246d.dll.
OPENCV_DIR has this value: OPENCV_DIR=C:\lib\opencv\build\x64\vc11.
The solution at Error "ImportError: DLL load failed: %1 is not a valid Win32 application" says to add "the new opencv binaries path (C:\opencv\build\bin\Release) to the Windows PATH environment variable". But as shown above, I already have the OpenCV binaries folder (C:\lib\opencv\build\x64\vc11\bin) in my PATH. And my OpenCV installation doesn't have any Release folders (except for an empty one under build/java).
What's going wrong? Can I tell Python to verbosely trace the loading process? Exactly what DLL files is it looking for?
I noticed that, according to http://www.dependencywalker.com/, the cv2.pyd in C:\lib\opencv\build\python\2.7 is 32-bit, whereas the machine and the Python I'm running are 64-bit. Could that be the problem? And if so, where can I find a 64-bit version of cv2.pyd?
Unofficial Windows Binaries for Python Extension Packages
You can find any Python libraries from here.
Please check if the Python version you are using is also 64 bit. If not then that could be the issue. You would be using a 32-bit Python version and would have installed a 64 bit binaries for the OpenCV library.
Wow, I found yet another case for this problem. None of the above worked. Eventually I used python's ability to introspect what was being loaded. For Python 2.7, this means:
import imp
imp.find_module("cv2")
This turned up a completely unexpected "cv2.pyd" file in an Anaconda DLL directory that wasn't touched by multiple uninstall/install attempts. Python was looking there first and not finding my good installation. I deleted that cv2.pyd file and tried imp.find_module("cv2") again and python immediately found the right file and cv2 started working.
So if none of the other solutions work for you, make sure you use Python introspection to see what file Python is trying to load.
In my case, I have 64-bit Python, and it was lxml that was the wrong version--I should have been using the x64 version of that as well. I solved this by downloading the 64-bit version of lxml here:
https://pypi.python.org/pypi/lxml/3.4.1
lxml-3.4.1.win-amd64-py2.7.exe
This was the simplest answer to a frustrating issue.
I just had this problem. It turns out it was just because I was using an 64-bit version of the OpenCV file. I tried the x86 and it worked.
I had the same problem. Here's what I did:
I downloaded the pywin32 wheel file from here, then
I uninstalled the pywin32 module. To uninstall, execute the following command in a command prompt.
pip uninstall pywin32
Then, I reinstalled pywin32. To install it, open the command prompt in the same directory where the pywin32 wheel file lies. Then execute the following command.
pip install <Name of the wheel file with extension>
Wheel file will be like: piwin32-XXX-cpXX-none-win32.whl
It solves the problem for me.
I copied cv2.pyd file from /opencv/build/python/2.7/x86 folder instead of from /x64 folder to C:/Python27/Lib/site-packeges. I followed rest of the instructions provided here.
Added by someone else, not verified: I also copy file cv2.pyd to folder C:/Python27/Lib/site-packages/cv2. It works.
For me the problem was that I was using different versions of Python in the same Eclipse project. My setup was not consistent with the Project Properties and the Run Configuration Python versions.
In menu Project → Properties → PyDev, I had the Interpreter set to Python 2.7.11.
In Run Configurations → Interpreter, I was using the Default Interpreter. Changing it to Python 2.7.11 fixed the problem.
If your build system (CMake in my case) copies the file from <name>.dll to <name>.pyd, you will get this error if the original file wasn't actually a DLL file. In my case, building shared libraries got switched off, so the underlying file was actually a *.lib.
I discovered this error by loading the pyd file in Dependency Walker and finding that it wasn't valid.
Update NumPy.
pip install numpy --upgrade
It works for me!
This one worked for me:
pip install -- pywin32==227
I faced the same issue when I uninstalled and reinstalled a different version of 2.7.x of Python on my system using a 32-bit Windows Installer. I got the same error on most of my import statements.
I uninstalled the newly installed Python, downloaded a 64-bit Windows installer, reinstalled Python again, and it worked.
So I had problems installing vtk under Windows (as I use Python 3.7, there isn't any binary available so far. Just for older Python versions pip install vtk is not working)
I did wrote Python in my cmd:
Python 3.7.3 on win32
So I now know I have Python 3.7.3 running on a 32 bit.
I then downloaded the correct wheel at VTK‑8.2.0‑cp37‑cp37m‑win32.whl
Next I installed that wheel:
pip install VTK-8.2.0-cp37-cp37m-win32.whl
Then I tested it and it worked:
python
import vtk
I experienced the same problem while trying to write code concerning speech-to-text.
The solution was very simple. Uninstall the previous pywin32 using the pip method:
pip uninstall pywin32
The above will remove the existing one which is by default for 32 bit computers. And install it again using
pip install pywin32
This will install the one for the 64 bit computer which you are using.
I had a similar issue while trying to run uvicorn,
Creating a new virtual environment and reinstalling the python packages worked
You can install opencv from official or unofficial sites.
Refer to this question and this issue if you are using Anaconda.
It has a very simple solution.
After installing opencv
place
cv2.pyd from C:\opencv\build\python\2.7\ **x64** to C:\Python27\Lib\site-packages
instead of, place cv2.pyd from C:\opencv\build\python\2.7\ **x86** to C:\Python27\Lib\site-packages
I got this error when trying to import MySQLdb.
What worked for me was to uninstall Python and then reinstall it.
I got the error after installing npm (https://www.npmjs.com/get-npm). One thing it did was install Python even though I already had it.
First I copied cv2.pyd from /opencv/build/python/2.7/x86 to C:/Python27/Lib/site-packeges. The error was
"RuntimeError: module compiled against API version 9 but this version of numpy is 7"
Then I installed numpy-1.8.0-win32-superpack-python2.7.exe and OpenCV works fine.
>>> import cv2
>>> print cv2.__version__
2.4.13
Please make sure that you have installed a Python 2.7.12 or below version. Otherwise you will definitely get this error.
Make sure the Oracle client is 64 bit installed if the OS is 64 bit.
Make sure the Microsoft Visual C++ compiler for Python 2.7 is 64 for bit for a 64 bit OS or 32 bit for 32 bit.
Note: If your OS is 64 bit, install all packages of 64 bit or if the OS is 32 bit, install the 32-bit package.
This has worked for me. I have tried different methods, but this was my best solution.
Open a command prompt and type the following;
pip install opencv-python
(Make sure your Internet connection is on.)
After that, try importing it again.
It could also be that your Anaconda version is 32 bit when it should be 64 bit.
If you are using pycharm I go to settings -> python interpretation and click the + button and search for the name on the list of python packages there
An image showing where to go when you want to install something
I found the solution. Maybe you can try to use the cmd window rather than the Anaconda prompt window to start your first Scrapy test.
I have windows 8.1 and tried installing: python-3.5.0rc3-amd64
I tried running as admin to no avail.
Here is the log of the failed install: http://pastebin.com/Y465P6zi.
Manually install the Universal C Runtime update from Microsoft:
https://support.microsoft.com/en-us/kb/2999226
and then re-attempt installation of Python 3.5.
I too had the same issue. Try installing Python 3.4.3. It worked for me.
You may try some older version. I had similar issues and I tried a lot to update but not succeed. Then I tried for python-3.4.3. It's works fine for me. There are not much different between 3.4.3 and 3.5.0.
Please update the window version from windows update(if you have blocked auto windows update).
This problem have nothing to do with product key.
Installing older version might help but, won't solve the purpose of installing the 3.5.X version
I had this problem because I was trying to install Python on a computer that had its Windows Updates downloaded, yet not yet installed and configured.
Solution: reboot your computer so that all Windows updates are installed and configured, then try again.
Download python-2.7.14 following link:
https://www.python.org/downloads/release/python-2714/
Install "python-2.7.14" and set PATH variable manual in windows.
Create a New folder in the root of windows drive -> windows ( for example C:\windows\ ) and name it "installer", it's done. install again. it worked for me.
When running python26 under windows OS (64bits).....
I have got errors like:
import win32api" error in Python 2.6: pywintypes26.dll
or
pythoncom26.dll missing
ImportError: DLL load failed: The specified module could not be found.
I have done the msi installation for python26
all dlls can be found under C:\Python26\Lib\site-packages\pywin32_system32
After I copy pywintypes26.dll and pythoncom26.dll from C:\Python26\Lib\site-packages\pywin32_system32 to C:\Python26\Lib\site-packages\win32 -> Solve the problem!
I also hit a problem importing win32api.
The post-install script for pywin32 failed, which should copy pythoncom26.dll, pythoncomloader26.dll, and pywintypes26.dll, among other things. I ran it by hand and my installation was fixed.
python scripts\pywin32_postinstall.py -install
I had a similar problem when installing under 64 bit Python 3.4.2. I ran the install executable pywin32‑219.win‑amd64‑py3.4.exe from http://www.lfd.uci.edu/~gohlke/pythonlibs/ .
On the site it states clearly:
"Python 3.4 users must manually run python.exe Scripts\pywin32_postinstall.py -install from an elevated command prompt."
which I did not do first time round; I installed from a normal prompt getting the following feedback:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Python34\pythoncom34.dll
Copied pywintypes34.dll to C:\Python34\pywintypes34.dll
You do not have the permissions to install COM objects.
The sample COM objects were not registered.
etc.etc.
Finishing with "The pywin32 extensions were succesfully installed" ...
I only read the last sentence and I started to run some code resulting in getting these dll load fails.
So, did some research, and started an elevated prompt (how: see "http://www.sevenforums.com/tutorials/783-elevated-command-prompt.html") and again ran:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Windows\system32\pythoncom34.dll
Copied pywintypes34.dll to C:\Windows\system32\pywintypes34.dll
Registered: Python.Interpreter
Registered: Python.Dictionary
Registered: Python
-> Software\Python\PythonCore\3.4\Help[None]=None
-> Software\Python\PythonCore\3.4\Help\Pythonwin Reference[None]='C:\\Python34\\Lib\\site-packages\\PyWin32.chm'
Pythonwin has been registered in context menu
Shortcut for Pythonwin created
Shortcut to documentation created
The pywin32 extensions were successfully installed.
And now my code runs happily (as far as this matter is concerned... sigh, so much other stuff to do).
Run the installer as Administrator and it works:
Right click on pywin32-installer.exe
Choose "Run as Administrator"
As suggested above the post install script is not run, this issue can be seen when installing from a wheel (As I encountered)
python scripts\pywin32_postinstall.py -install
If find you have this issue when installing via wheels, then installing it from here can solve the above issue.
https://pypi.python.org/pypi/pypiwin32
There appears to be a bug in the installer. The recommended workaround in the ticket is the same one as proposed by Dave Bremer.
I could fix this situation by removing all installed Python3.4 versions (had forgotten to uninstall 3.4.1 before installing 3.4.2), deleting C:\Python34 and after installing Python 3.4.2 pywin32-219.win32-py34.exe could be installed and called without problems.
So, copying around DLLs should NOT be necessary!
I always install the Active State Python distro which installs the win32 packages for you and gets it right.
If the above didn't fix the problem, you're still missing the msvcr100.dll file. It's either in your \System32\ folder, or more likely in your c:\PythonXX\Lib\site-packages\win32\ folder.
That fixed it for me after hours of search to no avail, even though it looks like the import still isn't resolved as it should be (PyCharm still gives me the squiggly underline), but it works.
First I was using pip to install pywin32 in anaconda environment, that's why no matter what I did it was failing. After trial and error, I figured out that
conda install pywin32
is the right way to install pywin32 in the anaconda package manager.
I don't know whether it's too late or not to answer this question. I also hit this problem, and I tried every method above, but neither of them worked.
Finally, I found the reason. When we install pywin32, we must choose the one that fits python's version(2.6， 2.7， 3.3， etc) and python's bit number(x64 or x86). Notice, it must fit python's bit number, not PC's bit number. If you install x86 python in a x64 PC, you have to install a pywin32 with x86.
In my case i had to copy pywintypes26.dll and pythoncom26.dll files into C:\Windows\System32 folder to work it properly in jupyter notebook.
I am using windows 10 OS with multiple python versions