We Keep Coding

How to run the django-admin manage.py runserver

I just want to call this command : django-admin manage.py runserver but it always fails and it gives me this message instead:
(No Django settings specified. Unknown command: 'manage.py')
what can I do ?

Go to the folder where your manage.py file is located nad run
./manage.py runserver or python manage.py runserver

The real command is:
python manage.py runserver
your version with django is incorrect.
django-admin using for creating project

You must either define the environment variable DJANGO_SETTINGS_MODULE or call settings.configure() before accessing settings.
After that's enough to run the below command for running the project:
➜ django-admin runserver
or run the below command in the base directory of project:
➜ python manage.py runserver

Is there any way to execute custom makemessages command by running "django-admin makemessages -l ja"?

I'm using Django1.11.5 and I created makemessages.py file in "my-app/management/commands/" directory to customise makemessages command.
And I made it to execute this command by running "python ../manage.py makemessages" from my-app directory.
But I want to execute by "django-admin makemessages -l ja".
(Running "django-admin makemessages -l ja" just executes default makemessages command)
Is there any way to execute this customised command by running "django-admin makemessages -l ja"?

I believe it should work if you did all right. Take a look at this docs part:
In addition, manage.py is automatically created in each Django
project. manage.py does the same thing as django-admin but takes care
of a few things for you:
It puts your project’s package on sys.path.
It sets the DJANGO_SETTINGS_MODULE environment variable so that it points to your
project’s settings.py file.
Carefully check this two moments. Since your manage.py works as expected, you already added your app in INSTALLED_APPS (after that Django can find and override default management command).

manage.py command in crontab not working

I have created a executeable script .sh which contains code to run a django managemenet command.
cron.sh
#!/bin/sh
. /path/to/env/activate
cd /path/to/project
/path/to/env/bin/python manage.py some_command
I can confirm this script and manage.py command is working by executing it directly on terminal
$ /path/to/cron.sh
When i do it same via crontab its not working as expected.
** What am i doing wrong ?? I can confirm there is nothing wrong with crontab, it executing the cron.sh file but path/to/env/bin/python manage.py some_command is not working as expected.
cron log also showing
CRON[14768]: (root) CMD /path/to/cron.sh > /dev/null 2>&1
I am using bitnami django ami (ubuntu 14.04.5 LTS)
Update
After removing /dev/null i am getting this error now
"Cannot locate wrapped file"

It seems that it is a PATH problem. I do not know if django uses specific paths that must be set but AFAIK the crontab PATH is really limited due to security reasons. Just to check if that is the problem you could do in a shell terminal the following:
echo $PATH
You will get a complete PATH for instance:
/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
In your crontab, put it above your code:
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
Tell me if this works. If does, try to purge the provided PATH or even better provide absolute locations in your code.
I have to say that I don't know if you can perform a cd in the cron like this. I always used absolute paths or cd /some/dir && /path/to/script args.
P.S: I cannot make comments yet, for this reason I put it in an answer.

The problem is that your not using the script that Bitnami uses to load all the environment variables (/opt/bitnami/scritps/setenv.sh).
I would try using this script:
#!/bin/sh
. /opt/bitnami/scritps/setenv.sh
. /path/to/env/activate
cd /path/to/project
/path/to/env/bin/python manage.py some_command

Running Django migrations when deploying to Elastic Beanstalk

I have my Django app set up on Elastic Beanstalk and recently made a change to the DB that I would like to have applied to the live DB now. I understand that I need to set this up as a container command, and after checking the DB I can see that the migration was run, but I can't figure out how to have more controls over the migration. For example, I only want a migration to run when necessary but from my understanding, the container will run the migration on every deploy assuming the command is still listed in the config file. Also, on occassion, I will be given options during a migration such as:
Any objects realted to these content types by a foreign key will also be deleted.
Are you sure you want to delete these content types?
If you're unsure, answer 'no'
How do I set up the container command to respond to this with a yes during the deployment phase?
This is my current config file
container_commands:
01_migrate:
command: 'source /opt/python/run/venv/bin/actiate && python app/manage.py makemigrations'
command: 'source /opt/python/run/venv/bin/activate && python app/manage.py migrate'
Is there a way to set these 2 commands to only run when necessary and to respond to the yes/no options I receive during a migration?

I'm not sure there is a specific way to answer yes or no. but you can append --noinput to your container command. Use the --noinput option to suppress all user prompting, such as “Are you sure?” confirmation messages.
try
command: 'source /opt/python/run/venv/bin/activate && python app/manage.py migrate --noinput'
OR..
You can ssh into your elasticbean instance and run your command manually.
Then you'll have more control over the migrations.
Install awsebcli with pip install awsebcli
Type eb ssh Your EnvironmentName
Navigate to your eb instance app directory with:
sudo -s
source /opt/python/run/venv/bin/activate
source /opt/python/current/env
cd /opt/python/current/app
then run your command.
./manage.py migrate
I hope this helps

Aside from the automatic migration that you can add to deploy script (which runs every time you update the environment, and may not be desirable if you have long running migration or other Django management commands), you can ssh into an EB instance to run migration manually.
Here is how to manually run migration (and any other Django management commands) while working with Amazon Linux 2 (Python 3.7, 3.8) created by Elastic Beanstalk:
First, from your EB cli: eb ssh to connect an instance.
The virtual environment can be activated by
source /var/app/venv/*/bin/activate
The manage.py can be ran by
python3 /var/app/current/manage.py
Now the only tricky bit is to get Elastic Beanstalk's environment variables. You can access them by /opt/elasticbeanstalk/bin/get-config, I'm not super familiar with bash script, but here is a little script that I use to get and set environment variables, maybe someone can improve it to make it less hard-coded:
#! /bin/bash
export DJANGO_SECRET_KEY=$(/opt/elasticbeanstalk/bin/get-config environment -k DJANGO_SECRET_KEY)
...
More info regarding Amazon Linux 2 splatform script tools: https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/custom-platforms-scripts.html

Make sure that the same settings are used when migrating and running!
Thus I would recommend you change this kind of code in django.config
container_commands:
01_migrate:
command: "source /opt/python/run/venv/bin/activate && python manage.py migrate"
leader_only: true
to:
container_commands:
01_migrate:
command: "django-admin migrate"
leader_only: true
option_settings:
aws:elasticbeanstalk:application:environment:
DJANGO_SETTINGS_MODULE: fund.productionSettings
as recommended here. This will help you avoid issues with wrong settings used.
More on manage.py v.s. django-admin.py.

django-admin method not working as it was not configured properly. You can also use python manage.py migrate in
.ebextentions/django.config
container_commands:
01_migrate:
command: "python manage.py migrate"
leader_only: true

In reference to Oscar Chen answer, you can set environmental variables using eb cli with
eb setenv key1=value1 key2=valu2 ...etc

The trick is that the full output of container_commands is in /var/log/cfn-init-cmd.log (Amazon Linux 2 Elastic Beanstalk released November 2020).
To view this you would run:
eb ssh [environment-name]
sudo tail -n 50 -f /var/log/cfn-init-cmd.log
This doesn't seem to be documented anywhere obvious and it's not displayed by eb logs; I found it by hunting around in /var/log.
The Django example management command django-admin.py migrate did not work for me. Instead I had to use something like:
01_migrate:
command: "$PYTHONPATH/python manage.py migrate"
leader_only: true
02_collectstatic:
command: "$PYTHONPATH/python manage.py collectstatic --noinput --verbosity=0 --clear"
To see the values of your environment variables at deploy time, you can create a debug command like:
03_debug:
command: "env"
You can see most of these environment variable with eb ssh; sudo cat /opt/elasticbeanstalk/deployment/env, but there seem to be some subtle differences at deploy time, hence using env above to be sure.
Here you'll see that $PYTHONPATH is being in a non-typical way, pointing to the virtualenv's bin directory, not the site-packages directory.

This answer looks like it will work for you if you just want to send "yes" to a few prompts.
You might also consider the --noinput flag so that your config looks like:
container_commands:
01_migrate:
command: 'source /opt/python/run/venv/bin/actiate && python app/manage.py makemigrations'
command: 'source /opt/python/run/venv/bin/activate && python app/manage.py migrate --noinput
This takes the default setting, which is "no".
It also appears that there's an open issue/fix to solve this problem a better way.

-bash: ./manage.py: Permission denied

After running:
$ ./manage.py migrate I am getting the following error:
-bash: ./manage.py: Permission denied
Trying to run a migration after making a change in the DB.
Any advice would be really appreciated.

You need to make manage.py executable to excecute it. Do chmod +x manage.py to make it excecutable. Alternately you can do python manage.py <cmd> instead.

To give yourself execute permission for the file containing the script use the command:
chmod u+rwx filename.py
To give other users permission to read and execute but not alter the shell script use:
chmod go+rx filename.py
reference http://unixhelp.ed.ac.uk/scrpt/scrpt1.2.html

You can try to use
python manage.py migrate
instead of .
/manage.py migrate

I typed su root space after root and it worked.
root was my admin password then the CMD after with a space after the admin password.