I have a Python 2.7 script SendPreord.py which communicates with web services using SUDS. In the script I call a web service method passing some parameters as strings (runJob(par1, par2, par3)). It works well with western european characters in the strings. I run it in Eclipse with PyDev.
Then I generate the .exe using py2exe. Now it gives me the error
Traceback (most recent call last):
File "SendPreord.py", line 80, in <module>
File "suds\client.pyc", line 542, in __call__
File "suds\client.pyc", line 602, in invoke
File "suds\client.pyc", line 637, in send
File "suds\transport\https.pyc", line 64, in send
File "suds\transport\http.pyc", line 77, in send
File "suds\transport\http.pyc", line 118, in u2open
File "urllib2.pyc", line 391, in open
File "urllib2.pyc", line 409, in _open
File "urllib2.pyc", line 369, in _call_chain
File "urllib2.pyc", line 1173, in http_open
File "urllib2.pyc", line 1142, in do_open
File "httplib.pyc", line 946, in request
File "httplib.pyc", line 987, in _send_request
File "httplib.pyc", line 940, in endheaders
File "httplib.pyc", line 801, in _send_output
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 484: ordinal not in range(128)
The code causing the error is:
result = ws_client.service.runJob(par1, par2, par3)
Investigating, I realized that removing characters like °èòà solves the problem... but I can't! I have to preserve the strings I'm passing.
So I tried decoding strings before passing them:
result = ws_client.service.runJob(par1.decode('latin9'), par2.decode('latin9'), par3.decode('latin9'))
Again all works in .py, but not in .exe. Maybe PyDev corrects the issue in some way?
ATTACHMENTS
Setup.py:
from distutils.core import setup
import py2exe
setup(console=['src/SendPreord.py'])
Interesting extracts from py2exe output log:
*** copy dlls ***
copying C:\Python27\lib\site-packages\py2exe\run.exe -> C:\Users\xxxxxxx\workspace\eclipse\SendPreord\dist\SendPreord.exe
The following modules appear to be missing
['ElementC14N', '_scproxy', 'ntlm']
*** binary dependencies ***
Your executable(s) also depend on these dlls which are not included,
you may or may not need to distribute them.
Make sure you have the license if you distribute any of them, and
make sure you don't distribute files belonging to the operating system.
USER32.dll - C:\Windows\system32\USER32.dll
SHELL32.dll - C:\Windows\system32\SHELL32.dll
WSOCK32.dll - C:\Windows\system32\WSOCK32.dll
ADVAPI32.dll - C:\Windows\system32\ADVAPI32.dll
WS2_32.dll - C:\Windows\system32\WS2_32.dll
KERNEL32.dll - C:\Windows\system32\KERNEL32.dll
You've been bitten by Python's guessing on encoding conversions. The first part you tried is right: decode first with the (hopefully correct) encoding. Before you send it out, you have to
encode it again, preferrably using something like UTF-8, or else Python tries the "default" encoding (which is in most installations ASCII). I've written this here before
Related
I have scraped some data from a website for my assignment. It consists of Indian rupee character - "₹". The data when I'm trying to save into CSV file in utf-8 characters on local machine using pandas, it is saving effortlessly. The same file, I have changed the delimiters and tried to save the file to s3 using pandas, but it gave "UnicodeEncodeError" error. I'm scraping the web page using scrapy framework.
Earlier I was trying to save the file in Latin-1 i.e. "ISO-8859-1" formatting and hence changed to "utf-8" but the same error is occurring. I'm using pythn 3.7 for the development.
Below code used for saving on the local machine which is working:
result_df.to_csv(filename+str2+'.csv',index=False)
Below code is used to save the file to S3:
search_df.to_csv('s3://my-bucket/folder_path/filename_str2.csv',encoding = 'utf-8',line_terminator='^',sep='~',index=False)
Below is the error while saving the file to S3:
2019-10-29 19:24:27 [scrapy.utils.signal] ERROR: Error caught on signal handler: <function Spider.close at 0x0000019CD3B1AA60>
Traceback (most recent call last):
File "c:\programdata\anaconda3\lib\site-packages\twisted\internet\defer.py", line 151, in maybeDeferred
result = f(*args, **kw)
File "c:\programdata\anaconda3\lib\site-packages\pydispatch\robustapply.py", line 55, in robustApply
return receiver(*arguments, **named)
File "c:\programdata\anaconda3\lib\site-packages\scrapy\spiders\__init__.py", line 94, in close
return closed(reason)
File "C:\local_path\spiders\Pduct_Scrape.py", line 430, in closed
search_df.to_csv('s3://my-bucket/folder_path/filename_str2.csv',encoding = 'utf-8',line_terminator='^',sep='~',index=False)
File "c:\programdata\anaconda3\lib\site-packages\pandas\core\generic.py", line 3020, in to_csv
formatter.save()
File "c:\programdata\anaconda3\lib\site-packages\pandas\io\formats\csvs.py", line 172, in save
self._save()
File "c:\programdata\anaconda3\lib\site-packages\pandas\io\formats\csvs.py", line 288, in _save
self._save_chunk(start_i, end_i)
File "c:\programdata\anaconda3\lib\site-packages\pandas\io\formats\csvs.py", line 315, in _save_chunk
self.cols, self.writer)
File "pandas/_libs/writers.pyx", line 75, in pandas._libs.writers.write_csv_rows
File "c:\programdata\anaconda3\lib\encodings\cp1252.py", line 19, in encode
return codecs.charmap_encode(input,self.errors,encoding_table)[0]
UnicodeEncodeError: 'charmap' codec can't encode character '\u20b9' in position 2661: character maps to <undefined>
I am very new to this StackOverflow platform and please let me know if more information is to be presented.
The error gives an evidence that the code tries to encode the filename_str2.csv file in cp1252. From your stack trace:
...File "C:\local_path\spiders\Pduct_Scrape.py", line 430, in closed
search_df.to_csv('s3://my-bucket/folder_path/ filename_str2.csv ',......
File "c:\programdata\anaconda3\lib\encodings\ cp1252.py ", line 19, in encode
The reason I do not know, because you explicitely ask for an utf-8 encoding. But as the codecs page in the Python Standard Library reference says that the canonical name for utf8 is utf_8 (notice the underline instead of minus sign) and does not list utf-8 in allowed aliases, I would first try to use utf_8. If it still uses cp1252, then you will have to give the exact versions of Python and pandas that you are using.
During a Spyder session my Linux froze. After startup, I could not start Spyder; I got the following error instead:
(trusty)dreamer#localhost:~$ spyder
Traceback (most recent call last):
File "/home/dreamer/anaconda2/bin/spyder", line 2, in <module>
from spyderlib import start_app
File "/home/dreamer/anaconda2/lib/python2.7/site-packages/spyderlib/start_app.py", line 13, in <module>
from spyderlib.config import CONF
File "/home/dreamer/anaconda2/lib/python2.7/site-packages/spyderlib/config.py", line 736, in <module>
subfolder=SUBFOLDER, backup=True, raw_mode=True)
File "/home/dreamer/anaconda2/lib/python2.7/site-packages/spyderlib/userconfig.py", line 215, in __init__
self.load_from_ini()
File "/home/dreamer/anaconda2/lib/python2.7/site-packages/spyderlib/userconfig.py", line 260, in load_from_ini
self.readfp(configfile)
File "/home/dreamer/anaconda2/lib/python2.7/ConfigParser.py", line 324, in readfp
self._read(fp, filename)
File "/home/dreamer/anaconda2/lib/python2.7/ConfigParser.py", line 479, in _read
line = fp.readline()
File "/home/dreamer/anaconda2/lib/python2.7/codecs.py", line 690, in readline
return self.reader.readline(size)
File "/home/dreamer/anaconda2/lib/python2.7/codecs.py", line 545, in readline
data = self.read(readsize, firstline=True)
File "/home/dreamer/anaconda2/lib/python2.7/codecs.py", line 492, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf8' codec can't decode byte 0xfe in position 2: invalid start byte
(trusty)dreamer#localhost:~$
I have found this solution, which sounds very much like my problem, but am curious if there are others, and whether anyone knows why this occurred.
My guess is that your spyder configuration file somehow got corrupted. This is the file spyder.ini, which resides in a directory like ~/.spyder2 (the exact name of the directory depends on the version you have installed). Maybe the encoding of the configuration file changed or a Unicode byte order mark was somehow introduced.
Possible solutions: use an editor to convert the file back to UTF-8; delete the configuration file; delete the whole directory containing the configuration file. The last two obviously delete any changes you made to the configuration.
I am unable to get spyder to load. I am running windows 7, 64 bit.
I have installed Anaconda-2.3.0 64 bit and have attempted to run the bundled spyder.
I have also tried the latest separate spyder build and encountered the exact same issue.
When running spyder via cmd I recieve the following error message:
"
Traceback (most recent call last):
File "C:\Anaconda\scripts\spyder", line 2, in <module>
from spyderlib import start_app
File "C:\Anaconda\lib\site-packages\spyderlib\start_app.py", line 13, in <modu
le>
from spyderlib.config import CONF
File "C:\Anaconda\lib\site-packages\spyderlib\config.py", line 718, in <module
>
subfolder=SUBFOLDER, backup=True, raw_mode=True)
File "C:\Anaconda\lib\site-packages\spyderlib\userconfig.py", line 215, in __i
nit__
self.load_from_ini()
File "C:\Anaconda\lib\site-packages\spyderlib\userconfig.py", line 260, in loa
d_from_ini
self.readfp(configfile)
File "C:\Anaconda\lib\ConfigParser.py", line 324, in readfp
self._read(fp, filename)
File "C:\Anaconda\lib\ConfigParser.py", line 479, in _read
line = fp.readline()
File "C:\Anaconda\lib\codecs.py", line 678, in readline
return self.reader.readline(size)
File "C:\Anaconda\lib\codecs.py", line 533, in readline
data = self.read(readsize, firstline=True)
File "C:\Anaconda\lib\codecs.py", line 480, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf8' codec can't decode byte 0xe8 in position 59: invalid
continuation byte
"
Is there some way to fix this?
Thanks
Never mind. Figured it out.
uninstall/reinstall anaconda.
delete Libraries\Documents.spyder2 folder
Run spyder. Wait a long time. spyder loads.
yay.
I installed PEP8 plugin for Wing IDE and now I get error when validate any .PY:
Error::Error executing script .user.internal_script_C0x3a0x5cUsers0x5chome0x5cAppData0x5cRoaming0x5cWing0x20IDE0x2050x5cscripts_pep8panel.pep8_execute
Runtime failure details:
Exception: "<type 'exceptions.UnicodeDecodeError'>"
Value = "'utf8' codec can't decode byte 0xc4 in position 21: invalid continuation byte"
Traceback:
File "C:\src\ide\bin\2.7\src\command\commandmgr.pyo", line 823, in Execute
File "C:\Users\home\AppData\Roaming\Wing IDE 5\scripts\pep8panel.py", line 114, in pep8_execute
_pep8_execute(filenames)
File "C:\Users\home\AppData\Roaming\Wing IDE 5\scripts\pep8panel.py", line 282, in _pep8_execute
handler = app.AsyncExecuteCommandLineE(cmd, rundir, env, *args)
File "C:\Program Files (x86)\Wing IDE 5.0\bin\wingapi.py", line 832, in AsyncExecuteCommandLineE
handler = spawn.CAsyncExecute(cmd, env, dirname, 10000.0, 100000, *args)
File "C:\src\svn-mirror-ide\bin\2.7\src\wingutils\spawn.pyo", line 1233, in __init__
File "C:\src\svn-mirror-ide\bin\2.7\src\wingutils\spawn.pyo", line 1142, in CreatePopenE
File "C:\src\svn-mirror-ide\bin\2.7\src\wingutils\spawn.pyo", line 986, in __init__
File "C:\src\svn-mirror-ide\bin\2.7\src\wingutils\spawn.pyo", line 200, in _win32_cmd_line_from_argv
What's wrong?
UPD: I use Russian Windows 7 and russian letters can appear only in path to Python files.
Looks like you have written your script in some legacy encoding. Try removing any non-ASCII characters (strings in some language other than English, Hawai'ian, or Latin are often the culprits. 0xC4 in Latin-1 is Ä).
If that solves your problem, either encode any non-ASCII strings as hex sequences ('g\xf6\xf6dbye w\xf6rld') or re-save as UTF-8. (Then maybe add # encoding: utf-8 near the top of the file to keep Python happy.)
I have a question that is a bit hard to explain. I'm forking devsniper's application 'customers' as a base to start a POS system for a local computer shop. The original application uses MySQL, however it is critical that this application uses my client's original data. So I am presented with two options:
1) I can migrate the SQLite Database to a MySQL DB
2) I can modify the program to use the SQLite DB (Preferred)
However, whenever I try to pull up the customers page, I get the following:
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 0: ordinal not in range(128)
I am not sure where to start with detailing my problem, as there isn't much detail in precisely what is causing this problem, however I will start with the traceback.
Traceback (most recent call last):
File "/home/tabras/posenv/local/lib/python2.7/site-packages/pyramid-1.4.2-py2.7.egg/pyramid/mako_templating.py", line 232, in __call__
result = template.render_unicode(**system)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/Mako-0.8.1-py2.7.egg/mako/template.py", line 452, in render_unicode
as_unicode=True)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/Mako-0.8.1-py2.7.egg/mako/runtime.py", line 783, in _render
**_kwargs_for_callable(callable_, data))
File "/home/tabras/posenv/local/lib/python2.7/site-packages/Mako-0.8.1-py2.7.egg/mako/runtime.py", line 815, in _render_context
_exec_template(inherit, lclcontext, args=args, kwargs=kwargs)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/Mako-0.8.1-py2.7.egg/mako/runtime.py", line 841, in _exec_template
callable_(context, *args, **kwargs)
File "/home/tabras/posenv/customers/customers/templates/base/index.html", line 102, in render_body
${next.body()}
File "/home/tabras/posenv/customers/customers/templates/customer/list.html", line 19, in render_body
<%include file="listPartial.html"/>
File "/home/tabras/posenv/local/lib/python2.7/site-packages/Mako-0.8.1-py2.7.egg/mako/runtime.py", line 710, in _include_file
callable_(ctx, **_kwargs_for_include(callable_, context._data, **kwargs))
File "/home/tabras/posenv/customers/customers/templates/customer/listPartial.html", line 50, in render_body
${pager(customers)}
File "/home/tabras/posenv/customers/customers/templates/base/uiHelpers.html", line 10, in render_pager
${items.pager(format="$link_previous ~2~ $link_next",
File "/home/tabras/posenv/local/lib/python2.7/site-packages/WebHelpers-1.3-py2.7.egg/webhelpers/paginate.py", line 716, in pager
self._pagerlink(self.next_page, symbol_next) or ''
File "/home/tabras/posenv/local/lib/python2.7/site-packages/WebHelpers-1.3-py2.7.egg/webhelpers/paginate.py", line 855, in _pagerlink
return HTML.a(text, href=link_url, onclick=onclick_action, **self.link_attr)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/WebHelpers-1.3-py2.7.egg/webhelpers/html/builder.py", line 213, in __call__
return make_tag(self._tag, *args, **kw)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/WebHelpers-1.3-py2.7.egg/webhelpers/html/builder.py", line 308, in make_tag
chunks.extend(escape(x) for x in args)
File "/home/tabras/posenv/local/lib/python2.7/site-packages/WebHelpers-1.3-py2.7.egg/webhelpers/html/builder.py", line 308, in <genexpr>
chunks.extend(escape(x) for x in args)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 0: ordinal not in range(128)
Post Solution Edit:
The problem was here:
${items.pager(format="$link_previous ~2~ $link_next",
symbol_previous="«",
symbol_next="»",
link_attr=link_attr,
curpage_attr=curpage_attr,
dotdot_attr=dotdot_attr,
onclick="$('.list-partial').load('%s'); return false;")}
For some reason the '»' character and its counterpart were giving throwing the error. I simply changed them to standard ascii characters and everything was golden.
Yeah, you were right about slowing down Michael -- It was a really simple error. In uiHelpers.html there was a unicode character '»' which was causing the problem for some reason.. Simply changed that to '>' and it was golden. This was a good lesson in reading the traceback more carefully, thanks for the feedback.
-Tabras