We Keep Coding

getting python pyobcd installed

I'm a little lost on how to get pyodbc installed in my computer.
I have python 3.6.1
The link
http://support.esri.com/en/technical-article/000011656
pointed me to another link
https://github.com/mkleehammer/pyodbc
Which is vague.
I'm used to downloading and running an exe for install.
This link is unclear and says all I have to do is:
"pip install pyodbc"
What exactly do I need to do to get this working?

Since you have not mentioned which OS you are using,
I will assume that you are on windows (as you have mentioned that you are used to install using .exe).
Firstly you need to know what a pip is:
pip is basically a package manager for python packages used to install 3 rd party packages which do not bundle along with the python distribution.
On linux pip comes pre installed also if you are using python version 3.4 onwards or python 2.7.9 you will be having pip pre installed on your system.
All you have to do it to open the command prompt issue the command
pip install package-name(pyobdc here)
it will do the job.
If you do not find pip in your distribution you can refer this link
How do I install pip on Windows?

open cmd in your computer and type
pip install pyobdc

Hello there and welcome to python programming. Basically python comes with its package installer so either you can go to any interpreter that you are using and type pip install pyobdc or use the command prompt in windows and type in pip install pyobdc. This would install your module and just remember to put import pyobdc at the top of the code if you want to use this package. Further information can be found on here

Problems with installing matplotlib in python 3.6

I'm trying to teach myself python, and I feel out of my depth. To start, I am working on a mac which already comes with python 2.7 installed.
I installed python 3.6 recently and have been using it to teach myself the basics. I'd like to eventually learn how to produce mathematical plots in python, and I know I will need the matplotlib package to do that.
Following some advice online, I was told that python3 already comes with pip installed, which is what I thought I should use to install matplotlib. The advice said I should type the following into the mac terminal:
python3.6 -m pip install matplotlib
I typed this, and it seemed like the package was installing, but I ended up getting some sort of error code that said:
Command "python setup.py egg_info" failed with error code 1 in [folder].
I tried opening IDLE and typing "import matplotlib", but I got the error: "no module named matplotlib". I also tried typing "import matplotlib.pyplot as plt", but I got the same error.
Based on further research and this youtube video, I've decided to just install miniconda in order to have access to the matplotlib package.
The problem is, I'm not sure if I should somehow be uninstalling whatever was installed when I ran the code above to install matplotlib. I've actually run that line of code 3 or 4 times. Should I remove anything before installing miniconda? Also, I am running python 3.6, while miniconda is listed on the website as being for python 3.5. Does this mean it won't work for my version of python?

Running pip like that would install packages system-wide. I'm guessing it's failing because you're not running as root (i.e. the administrator user). But wait! Don't try again as root! Instead of installing packages, do it in a virtual environment. First create it:
virtualenv myenv
This creates a directory called myenv with a bunch of stuff in it (so make note of where you run this command). Whenever you want to use the virtual environment (like straight away!) you first need to activate it:
. myenv/bin/activate
Don't miss out that dot (followed by a space) at the beginning! As the other answer says, the first thing you should do in it is upgrade pip:
pip install --upgrade pip
Now you're ready install whatever else you like:
pip install matplotlib
One last note: The virtual environment is tied to a particular Python version. By default it uses the system's Python 2.7 installation, so to use a different one you need to specify it when you create the virtual environment, like this (if that Python version is installed system-wide):
virtualenv -p python3.5 myenv
Or like this (if that Python version is not installed system-wide):
virtualenv -p /path/to/my/installation/of/python3.5 myenv
While the virtual environment is activated, you don't need to specify the particular path/version of Python. Just run it like this:
python

I also encountered many problems during my installation.
It seems that version 2 of matplotlib is not compatible with Python version 3.
Finally, I succeeded by specifying version 3 of matplotlib as follows with the following command:
sudo apt-get install python3-matplotlib
Reference from the Matplotlib website:
https://matplotlib.org/users/installing.html#building-on-linux

Try upgrade setup tools
--upgrade setuptools
or
easy_install -U setuptools
or upgrade pip
pip install --upgrade pip

I ended up downloading anaconda and using the python interpreter that comes with it, as anaconda comes with matplotlib and many other python packages of interest.

the pip command typically is for the Python 2. use pip3 instead to install the libraries in the python 3.X path
This should work
pip3 install matplotlib

The solution that work for me in python 3.6 is the following
py -m pip install matplotlib

Matplotlib files are downloaded in ~/.local/lib/python3.6/site-packages/ and not in /usr/lib/python3.6/ .
Try the command:
sudo cp -r ~/.local/lib/python3.6/site-packages/* /usr/lib/python3.6/

Does the python.org installer of python come with pip, and how do I use it?

I can download python 2.7.12 from python.org, and all python versions from 2.7.9 onwards are supposed to come with pip, but after installing it, using pip in the terminal does not work.
I am on macOS.
Have I installed pip, and if I have, how do I use it?

Here you have informations about pip:
https://packaging.python.org/installing/
normally python from python.org come with pip, maybe you should just update...
to update from terminal:
pip install -U pip setuptools
After when you need to install package, for example numpy, just do in a terminal:
pip install numpy
more informations here :
https://pip.pypa.io/en/stable/reference/pip_install/
you can also use conda install from anaconda as an alternative of pip :
http://conda.pydata.org/docs/get-started.html

Multiple instances of Python can coexist on your machine. Thus you could have installed Python 2.7.12 yet, when you call Python from terminal, you may be calling an older version.
To know which version you are using, type which python in terminal and look at its path. Then from Python in terminal, type
import sys
print(sys.version)
to get the exact version.
As Dadep says, I would recommend using conda to isolate your invironments if you have to play with multiple Python interpreters. Further conda simplifies 3rd party package installation process beyond doubt.

Error installing package with pip

I'm trying to install a charting tool (matplotlib-v1.4.2) for python 3.4 in Windows 7, so far all my trails doesn't seem to do the job.
Attempts:
I've downloaded pip from GitHub
python -m pip install matplotlib on Command Prompt[DOS] - No Use
There's a similar question posted here, tried these suggestions too but I get the following error
'$' is not reconginized as an internal or external command.
I'm sure I'm missing something, your step by step guidance on this regard would be much appreciated.

The $ refers to the beginning of a shell prompt, you shouldn't actually include it in your command :)
So rather than (from the example question you posted)
$ pip install requests
you actually type
pip install requests
In any case, you can download matplotlib .exe files from here for use in Windows. Make sure you get the correct bitness (32bit vs 64bit) and the correct Python version.

$ in the example signifies the linux prompt, which in windows is usually >
You can install the library by either using pip install, or using this link http://matplotlib.org/downloads.html
Additionally, most python packages for windows can be easily installed by using the installers from this site http://www.lfd.uci.edu/~gohlke/pythonlibs/

How to install pip in a new python installation

I recently installed python 2.7.2 on my Mac running OSX 10.6.8. Previously, I had version 2.6. I set my path in .bash_profile as follows:
export PATH=/usr/local/bin:$PATH
export PATH=/usr/local/share/python:$PATH
so that when I run python it will refer to my new installation. It does.
I would also like to use pip with my new installation, but the problem is that I already have the current version of pip installed at
/usr/local/bin/pip.
I tried to re-install pip with:
easy_install pip
But, of course this does not put pip in the desired new directory
/usr/local/share/python/pip
but simply refers to the existing version in /usr/local/bin/pip.
Can someone tell me how to fix this?
I would like to then use pip to install NumPy and SciPy in the correct directory (I was having trouble getting the SciPy installation to work with my old version of python, hence the new install).
If you'd like, you can visit the website where I found instructions for installing python 2.7, creating/updating my .bash_profile, installing pip, and NumPy and SciPy. Might provide some insight, or I'm happy to give more details if needed. Thanks!
http://www.thisisthegreenroom.com/2011/installing-python-numpy-scipy-matplotlib-and-ipython-on-lion/#python

Install distribute as per the instructions at http://pypi.python.org/pypi/distribute .
Make sure you specify the full path to the python executable (/usr/local/share/python/python or smth in your case).
$ curl -O https://svn.apache.org/repos/asf/oodt/tools/oodtsite.publisher/trunk/distribute_setup.py
$ /usr/local/share/python/python distribute_setup.py
Then you should have /usr/local/share/python/easy_install.
After that, run:
$ /usr/local/share/python/easy_install pip
Then you should have /usr/local/share/python/pip.
Depending on the ordering of things in your PATH, either your old, or the newly installed pip is executed when you execute the pip command, so you either might have to adapt your PATH, or specify the full path to /usr/local/share/python/pip when installing eggs.
(shameless plug:
In any case, you might consider using virtualenv for installing packages into a "project" specific isolated environment, as opposed to installing them globally.)

I needed to uninstall brew's python.
Then, I was left with python v2.7.6
Next to install, pip I ran
sudo easy_install pip
installed fine and working

I had a similar issue, try this:
$ python -m pip install --upgrade --force-reinstall pip
This will force reinstall pip with whatever version of python you use including installing the binary.

A few days ago I had a friend who was starting Python Programming and needed help with the same issue: installing pip. There are debates over which one to choose between easy_install and pip and it seems everybody is heading the pip direction. Either way, installing either of them can be frustrating.
You can use this simple tutorial : installing pip package manager the easy way
Here are what you should keep in mind as you follow the above guide:
If you already have an older version installed, uninstall it or totally remove the python installation
Once that is cleared, download an install Python.
After that, download ez_setup.py file and save it to your desktop - easily accessible from the command line
Now run it from the command line and it will install easy_install for you after which,
You can use it to install pip.
Once again, you can do this or use the above link to find a simple step-by-step guide on how to get it installed on your computer.
Good luck.

Just so that people knew, ATM we can install PIP by downloading get-pip.py from the page with docs and run it like this:
c:\python27\python.exe get-pip.py
BTW, Python 3.4 comes with PIP pre-installed.

One of the command line options lets you choose where to install to.
--install-dir (-d) install package to DIR
So something like - # easy_install pip -d /usr/local/share/python
(Please correct me if I'm wrong.)

Just wanted to say that I found a way to get around my problem. I don't know that I can explain it perfectly, since I am not very good at understanding what I am doing with this stuff just yet! But, the problem seems to have been with my PATH. I removed the PATH that I posted in my original question, and then used easy_install pip. It went straight to python 2.7.2 (my new version) with no problem. I then successfully used pip to install NumPy and SciPy in the correct location, and they both work. Thanks to ErikAllik and FakeRainBrigand for taking the time to look into it!