I'm trying to remove specific characters from a string using Python. This is the code I'm using right now. Unfortunately it appears to do nothing to the string.
for char in line:
if char in " ?.!/;:":
line.replace(char,'')
How do I do this properly?
Strings in Python are immutable (can't be changed). Because of this, the effect of line.replace(...) is just to create a new string, rather than changing the old one. You need to rebind (assign) it to line in order to have that variable take the new value, with those characters removed.
Also, the way you are doing it is going to be kind of slow, relatively. It's also likely to be a bit confusing to experienced pythonators, who will see a doubly-nested structure and think for a moment that something more complicated is going on.
Starting in Python 2.6 and newer Python 2.x versions *, you can instead use str.translate, (see Python 3 answer below):
line = line.translate(None, '!##$')
or regular expression replacement with re.sub
import re
line = re.sub('[!##$]', '', line)
The characters enclosed in brackets constitute a character class. Any characters in line which are in that class are replaced with the second parameter to sub: an empty string.
Python 3 answer
In Python 3, strings are Unicode. You'll have to translate a little differently. kevpie mentions this in a comment on one of the answers, and it's noted in the documentation for str.translate.
When calling the translate method of a Unicode string, you cannot pass the second parameter that we used above. You also can't pass None as the first parameter. Instead, you pass a translation table (usually a dictionary) as the only parameter. This table maps the ordinal values of characters (i.e. the result of calling ord on them) to the ordinal values of the characters which should replace them, or—usefully to us—None to indicate that they should be deleted.
So to do the above dance with a Unicode string you would call something like
translation_table = dict.fromkeys(map(ord, '!##$'), None)
unicode_line = unicode_line.translate(translation_table)
Here dict.fromkeys and map are used to succinctly generate a dictionary containing
{ord('!'): None, ord('#'): None, ...}
Even simpler, as another answer puts it, create the translation table in place:
unicode_line = unicode_line.translate({ord(c): None for c in '!##$'})
Or, as brought up by Joseph Lee, create the same translation table with str.maketrans:
unicode_line = unicode_line.translate(str.maketrans('', '', '!##$'))
* for compatibility with earlier Pythons, you can create a "null" translation table to pass in place of None:
import string
line = line.translate(string.maketrans('', ''), '!##$')
Here string.maketrans is used to create a translation table, which is just a string containing the characters with ordinal values 0 to 255.
Am I missing the point here, or is it just the following:
string = "ab1cd1ef"
string = string.replace("1", "")
print(string)
# result: "abcdef"
Put it in a loop:
a = "a!b#c#d$"
b = "!##$"
for char in b:
a = a.replace(char, "")
print(a)
# result: "abcd"
>>> line = "abc##!?efg12;:?"
>>> ''.join( c for c in line if c not in '?:!/;' )
'abc##efg12'
With re.sub regular expression
Since Python 3.5, substitution using regular expressions re.sub became available:
import re
re.sub('\ |\?|\.|\!|\/|\;|\:', '', line)
Example
import re
line = 'Q: Do I write ;/.??? No!!!'
re.sub('\ |\?|\.|\!|\/|\;|\:', '', line)
'QDoIwriteNo'
Explanation
In regular expressions (regex), | is a logical OR and \ escapes spaces and special characters that might be actual regex commands. Whereas sub stands for substitution, in this case with the empty string ''.
The asker almost had it. Like most things in Python, the answer is simpler than you think.
>>> line = "H E?.LL!/;O:: "
>>> for char in ' ?.!/;:':
... line = line.replace(char,'')
...
>>> print line
HELLO
You don't have to do the nested if/for loop thing, but you DO need to check each character individually.
For the inverse requirement of only allowing certain characters in a string, you can use regular expressions with a set complement operator [^ABCabc]. For example, to remove everything except ascii letters, digits, and the hyphen:
>>> import string
>>> import re
>>>
>>> phrase = ' There were "nine" (9) chick-peas in my pocket!!! '
>>> allow = string.letters + string.digits + '-'
>>> re.sub('[^%s]' % allow, '', phrase)
'Therewerenine9chick-peasinmypocket'
From the python regular expression documentation:
Characters that are not within a range can be matched by complementing
the set. If the first character of the set is '^', all the characters
that are not in the set will be matched. For example, [^5] will match
any character except '5', and [^^] will match any character except
'^'. ^ has no special meaning if it’s not the first character in the
set.
line = line.translate(None, " ?.!/;:")
>>> s = 'a1b2c3'
>>> ''.join(c for c in s if c not in '123')
'abc'
Strings are immutable in Python. The replace method returns a new string after the replacement. Try:
for char in line:
if char in " ?.!/;:":
line = line.replace(char,'')
This is identical to your original code, with the addition of an assignment to line inside the loop.
Note that the string replace() method replaces all of the occurrences of the character in the string, so you can do better by using replace() for each character you want to remove, instead of looping over each character in your string.
I was surprised that no one had yet recommended using the builtin filter function.
import operator
import string # only for the example you could use a custom string
s = "1212edjaq"
Say we want to filter out everything that isn't a number. Using the filter builtin method "...is equivalent to the generator expression (item for item in iterable if function(item))" [Python 3 Builtins: Filter]
sList = list(s)
intsList = list(string.digits)
obj = filter(lambda x: operator.contains(intsList, x), sList)))
In Python 3 this returns
>> <filter object # hex>
To get a printed string,
nums = "".join(list(obj))
print(nums)
>> "1212"
I am not sure how filter ranks in terms of efficiency but it is a good thing to know how to use when doing list comprehensions and such.
UPDATE
Logically, since filter works you could also use list comprehension and from what I have read it is supposed to be more efficient because lambdas are the wall street hedge fund managers of the programming function world. Another plus is that it is a one-liner that doesnt require any imports. For example, using the same string 's' defined above,
num = "".join([i for i in s if i.isdigit()])
That's it. The return will be a string of all the characters that are digits in the original string.
If you have a specific list of acceptable/unacceptable characters you need only adjust the 'if' part of the list comprehension.
target_chars = "".join([i for i in s if i in some_list])
or alternatively,
target_chars = "".join([i for i in s if i not in some_list])
Using filter, you'd just need one line
line = filter(lambda char: char not in " ?.!/;:", line)
This treats the string as an iterable and checks every character if the lambda returns True:
>>> help(filter)
Help on built-in function filter in module __builtin__:
filter(...)
filter(function or None, sequence) -> list, tuple, or string
Return those items of sequence for which function(item) is true. If
function is None, return the items that are true. If sequence is a tuple
or string, return the same type, else return a list.
Try this one:
def rm_char(original_str, need2rm):
''' Remove charecters in "need2rm" from "original_str" '''
return original_str.translate(str.maketrans('','',need2rm))
This method works well in Python 3
Here's some possible ways to achieve this task:
def attempt1(string):
return "".join([v for v in string if v not in ("a", "e", "i", "o", "u")])
def attempt2(string):
for v in ("a", "e", "i", "o", "u"):
string = string.replace(v, "")
return string
def attempt3(string):
import re
for v in ("a", "e", "i", "o", "u"):
string = re.sub(v, "", string)
return string
def attempt4(string):
return string.replace("a", "").replace("e", "").replace("i", "").replace("o", "").replace("u", "")
for attempt in [attempt1, attempt2, attempt3, attempt4]:
print(attempt("murcielago"))
PS: Instead using " ?.!/;:" the examples use the vowels... and yeah, "murcielago" is the Spanish word to say bat... funny word as it contains all the vowels :)
PS2: If you're interested on performance you could measure these attempts with a simple code like:
import timeit
K = 1000000
for i in range(1,5):
t = timeit.Timer(
f"attempt{i}('murcielago')",
setup=f"from __main__ import attempt{i}"
).repeat(1, K)
print(f"attempt{i}",min(t))
In my box you'd get:
attempt1 2.2334518376057244
attempt2 1.8806643818474513
attempt3 7.214925774955572
attempt4 1.7271184513757465
So it seems attempt4 is the fastest one for this particular input.
Here's my Python 2/3 compatible version. Since the translate api has changed.
def remove(str_, chars):
"""Removes each char in `chars` from `str_`.
Args:
str_: String to remove characters from
chars: String of to-be removed characters
Returns:
A copy of str_ with `chars` removed
Example:
remove("What?!?: darn;", " ?.!:;") => 'Whatdarn'
"""
try:
# Python2.x
return str_.translate(None, chars)
except TypeError:
# Python 3.x
table = {ord(char): None for char in chars}
return str_.translate(table)
#!/usr/bin/python
import re
strs = "how^ much for{} the maple syrup? $20.99? That's[] ricidulous!!!"
print strs
nstr = re.sub(r'[?|$|.|!|a|b]',r' ',strs)#i have taken special character to remove but any #character can be added here
print nstr
nestr = re.sub(r'[^a-zA-Z0-9 ]',r'',nstr)#for removing special character
print nestr
You can also use a function in order to substitute different kind of regular expression or other pattern with the use of a list. With that, you can mixed regular expression, character class, and really basic text pattern. It's really useful when you need to substitute a lot of elements like HTML ones.
*NB: works with Python 3.x
import re # Regular expression library
def string_cleanup(x, notwanted):
for item in notwanted:
x = re.sub(item, '', x)
return x
line = "<title>My example: <strong>A text %very% $clean!!</strong></title>"
print("Uncleaned: ", line)
# Get rid of html elements
html_elements = ["<title>", "</title>", "<strong>", "</strong>"]
line = string_cleanup(line, html_elements)
print("1st clean: ", line)
# Get rid of special characters
special_chars = ["[!##$]", "%"]
line = string_cleanup(line, special_chars)
print("2nd clean: ", line)
In the function string_cleanup, it takes your string x and your list notwanted as arguments. For each item in that list of elements or pattern, if a substitute is needed it will be done.
The output:
Uncleaned: <title>My example: <strong>A text %very% $clean!!</strong></title>
1st clean: My example: A text %very% $clean!!
2nd clean: My example: A text very clean
My method I'd use probably wouldn't work as efficiently, but it is massively simple. I can remove multiple characters at different positions all at once, using slicing and formatting.
Here's an example:
words = "things"
removed = "%s%s" % (words[:3], words[-1:])
This will result in 'removed' holding the word 'this'.
Formatting can be very helpful for printing variables midway through a print string. It can insert any data type using a % followed by the variable's data type; all data types can use %s, and floats (aka decimals) and integers can use %d.
Slicing can be used for intricate control over strings. When I put words[:3], it allows me to select all the characters in the string from the beginning (the colon is before the number, this will mean 'from the beginning to') to the 4th character (it includes the 4th character). The reason 3 equals till the 4th position is because Python starts at 0. Then, when I put word[-1:], it means the 2nd last character to the end (the colon is behind the number). Putting -1 will make Python count from the last character, rather than the first. Again, Python will start at 0. So, word[-1:] basically means 'from the second last character to the end of the string.
So, by cutting off the characters before the character I want to remove and the characters after and sandwiching them together, I can remove the unwanted character. Think of it like a sausage. In the middle it's dirty, so I want to get rid of it. I simply cut off the two ends I want then put them together without the unwanted part in the middle.
If I want to remove multiple consecutive characters, I simply shift the numbers around in the [] (slicing part). Or if I want to remove multiple characters from different positions, I can simply sandwich together multiple slices at once.
Examples:
words = "control"
removed = "%s%s" % (words[:2], words[-2:])
removed equals 'cool'.
words = "impacts"
removed = "%s%s%s" % (words[1], words[3:5], words[-1])
removed equals 'macs'.
In this case, [3:5] means character at position 3 through character at position 5 (excluding the character at the final position).
Remember, Python starts counting at 0, so you will need to as well.
In Python 3.5
e.g.,
os.rename(file_name, file_name.translate({ord(c): None for c in '0123456789'}))
To remove all the number from the string
How about this:
def text_cleanup(text):
new = ""
for i in text:
if i not in " ?.!/;:":
new += i
return new
Below one.. with out using regular expression concept..
ipstring ="text with symbols!##$^&*( ends here"
opstring=''
for i in ipstring:
if i.isalnum()==1 or i==' ':
opstring+=i
pass
print opstring
Recursive split:
s=string ; chars=chars to remove
def strip(s,chars):
if len(s)==1:
return "" if s in chars else s
return strip(s[0:int(len(s)/2)],chars) + strip(s[int(len(s)/2):len(s)],chars)
example:
print(strip("Hello!","lo")) #He!
You could use the re module's regular expression replacement. Using the ^ expression allows you to pick exactly what you want from your string.
import re
text = "This is absurd!"
text = re.sub("[^a-zA-Z]","",text) # Keeps only Alphabets
print(text)
Output to this would be "Thisisabsurd". Only things specified after the ^ symbol will appear.
# for each file on a directory, rename filename
file_list = os.listdir (r"D:\Dev\Python")
for file_name in file_list:
os.rename(file_name, re.sub(r'\d+','',file_name))
Even the below approach works
line = "a,b,c,d,e"
alpha = list(line)
while ',' in alpha:
alpha.remove(',')
finalString = ''.join(alpha)
print(finalString)
output: abcde
The string method replace does not modify the original string. It leaves the original alone and returns a modified copy.
What you want is something like: line = line.replace(char,'')
def replace_all(line, )for char in line:
if char in " ?.!/;:":
line = line.replace(char,'')
return line
However, creating a new string each and every time that a character is removed is very inefficient. I recommend the following instead:
def replace_all(line, baddies, *):
"""
The following is documentation on how to use the class,
without reference to the implementation details:
For implementation notes, please see comments begining with `#`
in the source file.
[*crickets chirp*]
"""
is_bad = lambda ch, baddies=baddies: return ch in baddies
filter_baddies = lambda ch, *, is_bad=is_bad: "" if is_bad(ch) else ch
mahp = replace_all.map(filter_baddies, line)
return replace_all.join('', join(mahp))
# -------------------------------------------------
# WHY `baddies=baddies`?!?
# `is_bad=is_bad`
# -------------------------------------------------
# Default arguments to a lambda function are evaluated
# at the same time as when a lambda function is
# **defined**.
#
# global variables of a lambda function
# are evaluated when the lambda function is
# **called**
#
# The following prints "as yellow as snow"
#
# fleece_color = "white"
# little_lamb = lambda end: return "as " + fleece_color + end
#
# # sometime later...
#
# fleece_color = "yellow"
# print(little_lamb(" as snow"))
# --------------------------------------------------
replace_all.map = map
replace_all.join = str.join
If you want your string to be just allowed characters by using ASCII codes, you can use this piece of code:
for char in s:
if ord(char) < 96 or ord(char) > 123:
s = s.replace(char, "")
It will remove all the characters beyond a....z even upper cases.
I have a list l.
l = ["This is","'the first 'string","and 'it is 'good"]
I want to replace all the whitespaces with "|space|" in strings that are within 's.
print (l)
# ["This is","'the|space|first|space|'string","and 'it|space|is|space|'good"]
I can't use a for loop inside a for loop and directly use .replace() as strings are not mutable
TypeError: 'str' object does not support item assignment
I have seen the below questions and none of them have helped me.
Replacing string element in for loop Python (3 answers)
Running replace() method in a for loop? (3 answers)
Replace strings using List Comprehensions (7 answers)
I have considered using re.sub but can't think of a suitable regular expression that does the job.
This works for me:
>>> def replace_spaces(str) :
... parts = str.split("'")
... for i in range(1,len(parts),2) :
... parts[i] = parts[i].replace(' ', '|')
... return "'".join( parts )
...
>>> [replace_spaces(s) for s in l]
['This is', "'the|first|'string", "and 'it|is|'good"]
>>>
I think I have solved your replacing problem with regex. You might have to polish the given code snippet a bit more to suit your need.
If I understood the question correctly, the trick was to use a regular expression to find the right space to be replaced.
match = re.findall(r"\'(.+?)\'", k) #here k is an element in list.
Placing skeleton code for your reference:
import re
l = ["This is","'the first 'string","and 'it is 'good"]
#declare output
for k in l:
match = re.findall(r"\'(.+?)\'", k)
if not match:
#append k itself to your output
else:
p = (str(match).replace(' ', '|space|'))
#append p to your output
I haven't tested it yet, but it should work. Let me know if you face any issues with this.
Using regex text-munging :
import re
l = ["This is","'the first 'string","and 'it is 'good"]
def repl(m):
return m.group(0).replace(r' ', '|space|')
l_new = []
for item in l:
quote_str = r"'.+'"
l_new.append(re.sub(quote_str, repl, item))
print(l_new)
Output:
['This is', "'the|space|first|space|'string", "and 'it|space|is|space|'g
ood"]
Full logic is basically:
Loop through elements of l.
Find the string between single quotes. Pass that to repl function.
repl function I'm using simple replace to replace spaces with |space| .
Reference for text-munging => https://docs.python.org/3/library/re.html#text-munging
I am familiar with the ability to insert variables into a string using Templates, like this:
Template('value is between $min and $max').substitute(min=5, max=10)
What I now want to know is if it is possible to do the reverse. I want to take a string, and extract the values from it using a template, so that I have some data structure (preferably just named variables, but a dict is fine) that contains the extracted values. For example:
>>> string = 'value is between 5 and 10'
>>> d = Backwards_template('value is between $min and $max').extract(string)
>>> print d
{'min': '5', 'max':'10'}
Is this possible?
That's called regular expressions:
import re
string = 'value is between 5 and 10'
m = re.match(r'value is between (.*) and (.*)', string)
print(m.group(1), m.group(2))
Output:
5 10
Update 1. Names can be given to groups:
m = re.match(r'value is between (?P<min>.*) and (?P<max>.*)', string)
print(m.group('min'), m.group('max'))
But this feature is not used often, as there are usually enough problems with a more important aspect: how to capture exactly what you want (with this particular case that's not a big deal, but even here: what if the string is value is between 1 and 2 and 3 -- should the string be accepted and what's the min and max?).
Update 2. Rather than making a precise regex, it's sometimes easier to combine regular expressions and "regular" code like this:
m = re.match(r'value is between (?P<min>.*) and (?P<max>.*)', string)
try:
value_min = float(m.group('min'))
value_max = float(m.group('max'))
except (AttributeError, ValueError): # no match or failed conversion
value_min = None
value_max = None
This combined approach is especially worth remembering when your text consists of many chunks (like phrases in quotes of different types) to be processed: in tricky cases, it's harder to define a single regex to handle both delimiters and contents of chunks than to define several steps like text.split(), optional merging of chunks, and independent processing of each chunk (using regexes and other means).
It's not possible to perfectly reverse the substitution. The problem is that some strings are ambiguous, for example
value is between 5 and 7 and 10
would have two possible solutions: min = "5", max = "7 and 10" and min = "5 and 7", max = "10"
However, you might be able to achieve useful results with regex:
import re
string = 'value is between 5 and 10'
template= 'value is between $min and $max'
pattern= re.escape(template)
pattern= re.sub(r'\\\$(\w+)', r'(?P<\1>.*)', pattern)
match= re.match(pattern, string)
print(match.groupdict()) # output: {'max': '10', 'min': '5'}
The behave module for Behavior-Driven Development provides a few different mechanisms for specifying and parsing templates.
Depending on the complexity of your templates, and the other needs of your app, you might find one or the other most useful. (Plus, you can steal their pre-written code.)
You can use the difflib module to compare the two strings and pull out the information you want.
https://docs.python.org/3.6/library/difflib.html
For example:
import difflib
def backwards_template(my_string, template):
my_lib = {}
entry = ''
value = ''
for s in difflib.ndiff(my_string, template):
if s[0]==' ':
if entry != '' and value != '':
my_lib[entry] = value
entry = ''
value = ''
elif s[0]=='-':
value += s[2]
elif s[0]=='+':
if s[2] != '$':
entry += s[2]
# check ending if non-empty
if entry != '' and value != '':
my_lib[entry] = value
return my_lib
my_string = 'value is between 5 and 10'
template = 'value is between $min and $max'
print(backwards_template(my_string, template))
Gives:
{'min': '5', 'max': '10'}
So i want to convert regex whitespaces into a string for example
list1 = ["Hello","\s","my","\s","name","\s","is"]
And I want to convert it to a string like
"Hello my name is"
Can anyone please help.
But also if there was characters such as
"\t"
how would i do this?
list = ["Hello","\s","my","\s","name","\s","is"]
str1 = ''.join(list).replace("\s"," ")
Output :
>>> str1
'Hello my name is'
Update :
If you have something like this list1 = ["Hello","\s","my","\s","name","\t","is"] then you can use multiple replace
>>> str1 = ''.join(list).replace("\s"," ").replace("\t"," ")
>>> str1
'Hello my name is'
or if it's only \t
str1 = ''.join(list).replace("\t","anystring")
I would highly recommend using the join string function mentioned in one of the earlier answers, as it is less verbose. However, if you absolutely needed to use regex in order to complete the task, here's the answer:
import re
list1 = ["Hello","\s","my","\s","name","\s","is"]
list_str = ''.join(list1)
updated_str = re.split('\\\s', list_str)
updated_str = ' '.join(updated_str)
print(updated_str)
Output is:
'Hello my name is'
In order to use raw string notation, replace the 5th line of code with the one below:
updated_str = re.split(r'\\s', list_str)
Both will have the same output result.
You don't even need regular expressions for that:
s = ' '.join([item for item in list if item is not '\s'])
Please note that list is an invalid name for a variable in python as it conflicts with the list function.