The user entered the word
éclair
into the search box.
Showing results 1 - 10 of about 140 for �air.
Why does it show the weird question mark?
I'm using Django to display it:
Showing results 1 - 10 of about 140 for {{query|safe}}
It's an encoding problem. Most likely your form or the output page is not UTF-8 encoded.
This article is very good reading on the issue: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)
You need to check the encoding of
the HTML page where the user input the word
the HTML page you are using to output the word
the multi-byte ability of the functions you use to work with the string (though that probably isn't a problem in Python)
If the search is going to apply to a data base, you will need to check the encoding of the database connection, as well as the encoding of your tables and columns.
This is the result when you interpret data that is not encoded in UTF-8 as UTF-8 encoded.
The interpreter expects from the code point of your first character of the word éclair a multibyte encoded character with a length of three characters, consumes the next two characters but can’t decode it (probably invalid byte sequence). For this case the REPLACEMENT CHARACTER � (U+FFFD) is shown.
So in your case you just need to really encode your data with UTF-8.
You are serving the page with the wrong character encoding (charset). Check that you are using the same encoding throughout all your application (for example UTF-8). This includes:
HTTP headers from web server (Content-Type: text/html;charset=utf-8)
Communication with database (i.e SET NAMES 'utf-8')
It would also be good to check your browser encoding setting.
I second the responses above. Some other things from the top of my head:
If you're using e.g. MySQL database, then it could be good to create your database using:
CREATE DATABASE x CHARACTER SET UTF8
You can also check this: http://docs.djangoproject.com/en/dev/ref/settings/#default-charset
Related
I have strings that I need to replace into an URL for accessing different JSON files. My problem is that some strings have special characters and I need only these as UTF-8 bytes, so I can properly find the JSON tables.
An example:
# I have this string
a = 'code - Brasilândia'
#in the JSON url it appears as
'code%20-%20Brasil%C3%A2ndia'
I managed to get the spaces converted right using urllib.quote(), but it does not convert the special characters as I need them.
print(urllib.quote('code - Brasilândia))
'code%20-%20Brasil%83ndia'
When I substitute this in the URL, I cannot reach the JSON table.
I managed to make this work using u before the string, u'code - Brasilândia', but this did not solve my issue, because the string will ultimately be a user input, and will need to be constantly changed.
I have tried several methods, but I could not get the result I need.
I'm specifically using python 2.7 for this project, and I cannot change it.
Any ideas?
You could try decoding the string as UTF-8, and if it fails, assume that it's Latin-1, or whichever 8-bit encoding you expect.
try:
yourstring.decode('utf-8')
except UnicodeDecodeError:
yourstring = yourstring.decode('latin-1').encode('utf-8')
print(urllib.quote(yourstring))
... provided you can establish the correct encoding; 0x83 seems to correspond to â only in some fairly obscure legacy encodings like code pages 437 and 850 (and those are the least obscure). See also https://tripleee.github.io/8bit/#83
(disclosure: the linked site is mine).
Demo: https://ideone.com/fjX15c
I have a model that has a regular text field, that needs to be able to accept user pasted text data into it which may contain scientific symbols, specifically lowercase delta δ. The users will be entering the data through the model admin.
I'm using a mysql backend, and the encoding is set to Latin-1. Changing the DB encoding is not an option for me.
what i would like to do, for simplicity's sake, is have the admin form scrub the input text, much like sanitation or validation, but to escape the characters such as δ to their HTML representation,so that i can store them in the DB without having to convert to Unicode and then back again.
What utilities are available to do this? I've looked at escape() and conditional_escape(), but they do not seem to do what i want them to (not escape the special characters) and the django.utils.encoding.force_text() will encode everything, but my data will render as its Unicode representation if i do that.
The site runs on django 1.10 and python 2.7.x
any help or thoughts are much appreciated.
As part of the save method or view that receives the request.POST data, you can escape it, encode it to ascii with xmlcharrefreplace, and then decode it back from bytes to a string:
raw_str = "this is a string with δ problematic chars"
result = html.escape(raw_str).encode("ascii", "xmlcharrefreplace").decode()
print(result) # 'this is a string with δ problematic chars'
Gets the job done since you can't change the encoding, though not nearly as clean as just getting to live in UTF-8. Good luck!
I built a django site last year that utilises both a dashboard and an API for a client.
They are, on occasion, putting unicode information (usually via a Microsoft keyboard and a single quote character!) into the database.
It's fine to change this one instance for everything, but what I constantly get is something like this error when a new character is added that I haven't "converted":
UnicodeDecodeError at /xx/xxxxx/api/xxx.json
'ascii' codec can't decode byte 0xeb in position 0: ordinal not in range(128)
The issue is actually that I need to be able to convert this unicode (from the model) into HTML.
# if a char breaks the system, replace it here (duplicate line)
text = unicode(str(text).replace('\xa3', '£'))
I duplicate this line here, but it just breaks otherwise.
Tearing my hair out because I know this is straight forward and I'm doing something remarkably silly somewhere.
Have searched elsewhere and realised that while my issue is not new, I can't find the answer elsewhere.
I assume that text is unicode (which seems a safe assumption, as \xa3 is the unicode for the £ character).
I'm not sure why you need to encode it at all, seeing as the text will be converted to utf-8 on output in the template, and all browsers are perfectly capable of displaying that. There is likely another point further down the line where something (probably your code, unfortunately) is assuming ASCII, and the implicit conversion is breaking things.
In that case, you could just do this:
text = text.encode('ascii', 'xmlcharrefreplace')
which converts the non-ASCII characters into HTML/XML entities like £.
Tell the JSON-decoder that it shall decode the json-file as unicode. When using the json module directly, this can be done using this code:
json.JSONDecoder(encoding='utf8').decode(
json.JSONEncoder(encoding='utf8').encode('blä'))
If the JSON decoding takes place via some other modules (django, ...) maybe you can pass the information through this other module into the json stuff.
Hello i was wondering if you know any other way to encode a string to a url-safe, because urllib.quote is doing it wrong, the output is different than expected:
If i try
urllib.quote('á')
i get
'%C3%A1'
But thats not the correct output, it should be
%E1
As demostrated by the tool provided here this site
And this is not me being difficult, the incorrect output of quote is preventing the browser to found resources, if i try
urllib.quote('\images\á\some file.jpg')
And then i try with the javascript tool i mentioned i get this strings respectively
%5Cimages%5C%C3%A1%5Csome%20file.jpg
%5Cimages%5C%E1%5Csome%20file.jpg
Note how is almost the same but the url provided by quote doesn't work and the other one it does.
I tried messing with encode('utf-8) on the string provided to quote but it does not make a difference.
I tried with other spanish words with accents and the ñ they all are differently represented.
Is this a python bug?
Do you know some module that get this right?
According to RFC 3986, %C3%A1 is correct. Characters are supposed to be converted to an octet stream using UTF-8 before the octet stream is percent-encoded. The site you link is out of date.
See Why does the encoding's of a URL and the query string part differ? for more detail on the history of handling non-ASCII characters in URLs.
Ok, got it, i have to encode to iso-8859-1 like this
word = u'á'
word = word.encode('iso-8859-1')
print word
Python is interpreted in ASCII by default, so even though your file may be encoded differently, your UTF-8 char is interpereted as two ASCII chars.
Try putting a comment as the first of second line of your code like this to match the file encoding, and you might need to use u'á' also.
# coding: utf-8
What about using unicode strings and the numeric representation (ord) of the char?
>>> print '%{0:X}'.format(ord(u'á'))
%E1
In this question it seems some guy wrote a pretty large function to convert to ascii urls, thats what i need. But i was hoping there was some encoding tool in the std lib for the job.
I'm using a Django app to export a string to a CSV file. The string is a message that was submitted through a front end form. However, I've been getting this error when a unicode single quote is provided in the input.
UnicodeEncodeError: 'ascii' codec can't encode character u'\u2019'
in position 200: ordinal not in range(128)
I've been trying to convert the unicode to ascii using the code below, but still get a similar error.
UnicodeEncodeError: 'ascii' codec can't encode characters in
position 0-9: ordinal not in range(128)
I've sifted through dozens of websites and learned a lot about unicode, however, I'm still not able to convert this unicode to ascii. I don't care if the algorithm removes the unicode characters. The commented lines indicate some various options I've tried, but the error persists.
import csv
import unicodedata
...
#message = unicode( unicodedata.normalize(
# 'NFKD',contact.message).encode('ascii','ignore'))
#dmessage = (contact.message).encode('utf-8','ignore')
#dmessage = contact.message.decode("utf-8")
#dmessage = "%s" % dmessage
dmessage = contact.message
csv_writer.writerow([
dmessage,
])
Does anyone have any advice in removing unicode characters to I can export them to CSV? This seemingly easy problem has kept my head spinning. Any help is much appreciated.
Thanks,
Joe
You can't encode the Unicode character u'\u2019' (U+2019 Right Single Quotation Mark) into ASCII, because ASCII doesn't have that character in it. ASCII is only the basic Latin alphabet, digits and punctuation; you don't get any accented letters or ‘smart quotes’ like this character.
So you will have to choose another encoding. Now normally the sensible thing to do would be to export to UTF-8, which can hold any Unicode character. Unfortunately for you if your target users are using Office (and they probably are), they're not going to be able to read UTF-8-encoded characters in CSV. Instead Excel will read the files using the system default code page for that machine (also misleadingly known as the ‘ANSI’ code page), and end up with mojibake like ’ instead of ’.
So that means you have to guess the user's system default code page if you want the characters to show up correctly. For Western users, that will be code page 1252. Users with non-Western Windows installs will see the wrong characters, but there's nothing you can do about that (other than organise a letter-writing campaign to Microsoft to just drop the stupid nonsense with ANSI already and use UTF-8 like everyone else).
Code page 1252 can contain U+2019 (’), but obviously there are many more characters it can't represent. To avoid getting UnicodeEncodeError for those characters you can use the ignore argument (or replace to replace them with question marks).
dmessage= contact.message.encode('cp1252', 'ignore')
alternatively, to give up and remove all non-ASCII characters, so that everyone gets an equally bad experience regardless of locale:
dmessage= contact.message.encode('ascii', 'ignore')
Encoding is a pain, but if you're working in django have you tried smart_unicode(str) from django.utils.encoding? I find that usually does the trick.
The only other option I've found is to use the built-in python encode() and decode() for strings, but you have to specify the encoding for those and honestly, it's a pain.
[caveat: I'm not a djangoist; django may have a better solution].
General non-django-specific answer:
If you have a smallish number of known non-ASCII characters and there are user-acceptable ASCII equivalents for them, you can set up a translation table and use the unicode.translate method:
smashcii = {
0x2019 : u"'",
# etc
#
smashed = input_string.translate(smashcii)