Related
So I'm trying to make a program that scans the SSH port for IPs in a list. Because the process is painfully long I'm trying to use threading (I can use multiprocessing if it is more suitable for the program) to make everything faster but I'm running in a problem where the program says "Trying IP" (that's what it's meant to say every time it scans an IP) a lot of times without giving a result and then it gives the results (significantly fewer results than IP scans) and having other weird patterns. It should say Trying IP and then the result but it doesn't and even the result is always failing even if it does find IPs with the SSH port open. At some point I was curious if it misses IPs with SSH so I searched for an IP range that should have a lot of them and it only caught 2000 of them even if the guy who posted the class said he got 45000, yeah I know, maybe something happened and an insane amount of people closed SSH but no, I downloaded something called a "scanning archive" made by some Romanian hackers that had a SSH port scanner in it and when I scanned the same IP range I caught 6600.
So can someone help me figure out what is wrong with the code and tell me how to improve it?
import socket
import threading
from queue import Queue
from datetime import datetime
time_start = datetime.now()
SSH_ips = []
def scan(ip_number):
ip_try = ip_list[ip_number]
port = 22
try:
print("Trying IP")
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
result = sock.connect_ex((ip_try,port))
if result == 0:
SSH_ips.append(ip_try)
print("Found %d" % (ip_try))
else:
print("Didn't work")
except:
pass
def gulag():
while True:
worker = q.get()
scan(worker)
q.task_done()
q = Queue()
for x in range(15000):
t = threading.Thread(target=gulag)
t.daemon = True
t.start()
for worker in range(0, 65026):
q.put(worker)
q.join()
time_finish = datetime.now()
time_elapsed = time_finish - time_start
ip_list_lenght = len(SSH_ips)
SSH_ips.sort()
print("Found %s IPs in %s." % (ip_list_lenght, time_elapsed));
print(SSH_ips)
... what is wrong with the code and tell me how to improve it?
try:
print("Trying IP")
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
...
except:
pass
Please don't just pass on exception but actually check why it failed. It is likely that you run against the limit of open file descriptors and thus creation of a new socket failed. In this case of course no connection will be attempted to this IP address.
result = sock.connect_ex((ip_try,port))
if result == 0:
SSH_ips.append(ip_try)
print("Found %d" % (ip_try))
else:
print("Didn't work")
Similar here check why exactly connect_ex failed instead of just assuming that it failed because there is no open port on the other end.
I don't understand how to have each thread pop a unique item off the queue and run the function concurrently. The way this is currently written it runs linearly, two threads run by popping the same item from the queue.
How could I have the loop pass unique items from the queue to each thread?
import sys
import subprocess
import threading
import Queue
def pinger(host):
subprocess.Popen(['ping', '-c 1', '-W 1', host])
ping_hosts = ['google.com', 'yahoo.com', 'disney.com', 'myspace.com','www.pingler.com', 'www.pingmylink.com',
'www.pingoat.net' ,'www.blogsearch.google.com' ,'pingmyblog.com', 'www.twingly.com', 'www.weblogs.com', 'auto-ping.com' ]
ping_hosts = [ 'google.com', 'yahoo.com', 'disney.com']
def Main():
q = Queue.Queue()
for item in ping_hosts:
q.put(item)
while q.qsize() != 0:
host = q.get()
t1 = threading.Thread(target=pinger, args=(host,)
t2 = threading.Thread(target=pinger, args=(host,)
t1.start()
t2.start()
t1.join()
t2.join()
print "Main Completed"
if __name__ == '__main__':
Main()
Your worker threads get to ping the same host, because you give the same host value to them. But the main problem with your code is that you consume the queue in the main (single) thread. What you do is put tasks in a queue (main thread), then get them (main thread) and start two worker threads, that do the ping (thread 1, thread 2), then join them (back in main thread again) and do that while there're tasks in a queue.
Also, the popen actually starts a new process to do the ping, so you might not even need the threads if it's only the ping you're interested in, just:
for host in ping_hosts:
subprocess.Popen(['ping', '-c 1', '-W 1', host])
But assuming your question is about threading, not doing the ping...
When using a queue, usually, you put tasks (data) in it in one thread, called the "producer", and get and process tasks (data) in another thread, called the "consumer", running simultaneously. Of course there may be several producers and several consumers.
So, in your case what you want is: put the hosts in the queue (main thread), start worker threads, that will get the data from the queue (thread 1, thread 2) and process it (same thread 1, thread 2), running simultaneously.
Try like this:
import subprocess
import threading
import Queue
def ping(host):
"""Pings a host."""
print("Pinging '%s'" % host)
subprocess.Popen(['ping', '-c 1', '-W 1', host])
def pinger_thread(thread_name, task_queue):
"""Gets the data from the queue and processes it."""
while task_queue.qsize() != 0:
host = task_queue.get()
print("%s: pinging '%s'" % (thread_name, host))
ping(host)
def main():
ping_hosts = ['google.com', 'yahoo.com', 'disney.com']
# Fill the queue
q = Queue.Queue()
for item in ping_hosts:
q.put(item)
# Start the threads, that will consume data from the queue
t1 = threading.Thread(target=pinger_thread, args=("Thread 1", q))
t2 = threading.Thread(target=pinger_thread, args=("Thread 2", q))
t1.start()
t2.start()
t1.join()
t2.join()
print("Main Completed")
if __name__ == '__main__':
main()
The output:
python2 test.py
Thread 1: pinging 'google.com'
Pinging 'google.com'
Thread 2: pinging 'yahoo.com'
Pinging 'yahoo.com'
Thread 1: pinging 'disney.com'
Pinging 'disney.com'
Main Completed
PING google.com (74.125.232.231) 56(84) bytes of data.
PING yahoo.com (206.190.36.45) 56(84) bytes of data.
PING disney.com (199.181.131.249) 56(84) bytes of data.
...
--- google.com ping statistics ---
...
--- disney.com ping statistics ---
...
--- yahoo.com ping statistics ---
...
I removed some ping command output as irrelevant. But what's important, you can see that the hosts are processed by two threads in order.
How do I ping a website or IP address with Python?
See this pure Python ping by Matthew Dixon Cowles and Jens Diemer. Also, remember that Python requires root to spawn ICMP (i.e. ping) sockets in linux.
import ping, socket
try:
ping.verbose_ping('www.google.com', count=3)
delay = ping.Ping('www.wikipedia.org', timeout=2000).do()
except socket.error, e:
print "Ping Error:", e
The source code itself is easy to read, see the implementations of verbose_ping and of Ping.do for inspiration.
Depending on what you want to achive, you are probably easiest calling the system ping command..
Using the subprocess module is the best way of doing this, although you have to remember the ping command is different on different operating systems!
import subprocess
host = "www.google.com"
ping = subprocess.Popen(
["ping", "-c", "4", host],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE
)
out, error = ping.communicate()
print out
You don't need to worry about shell-escape characters. For example..
host = "google.com; `echo test`
..will not execute the echo command.
Now, to actually get the ping results, you could parse the out variable. Example output:
round-trip min/avg/max/stddev = 248.139/249.474/250.530/0.896 ms
Example regex:
import re
matcher = re.compile("round-trip min/avg/max/stddev = (\d+.\d+)/(\d+.\d+)/(\d+.\d+)/(\d+.\d+)")
print matcher.search(out).groups()
# ('248.139', '249.474', '250.530', '0.896')
Again, remember the output will vary depending on operating system (and even the version of ping). This isn't ideal, but it will work fine in many situations (where you know the machines the script will be running on)
You may find Noah Gift's presentation Creating Agile Commandline Tools With Python. In it he combines subprocess, Queue and threading to develop solution that is capable of pinging hosts concurrently and speeding up the process. Below is a basic version before he adds command line parsing and some other features. The code to this version and others can be found here
#!/usr/bin/env python2.5
from threading import Thread
import subprocess
from Queue import Queue
num_threads = 4
queue = Queue()
ips = ["10.0.1.1", "10.0.1.3", "10.0.1.11", "10.0.1.51"]
#wraps system ping command
def pinger(i, q):
"""Pings subnet"""
while True:
ip = q.get()
print "Thread %s: Pinging %s" % (i, ip)
ret = subprocess.call("ping -c 1 %s" % ip,
shell=True,
stdout=open('/dev/null', 'w'),
stderr=subprocess.STDOUT)
if ret == 0:
print "%s: is alive" % ip
else:
print "%s: did not respond" % ip
q.task_done()
#Spawn thread pool
for i in range(num_threads):
worker = Thread(target=pinger, args=(i, queue))
worker.setDaemon(True)
worker.start()
#Place work in queue
for ip in ips:
queue.put(ip)
#Wait until worker threads are done to exit
queue.join()
He is also author of: Python for Unix and Linux System Administration
http://ecx.images-amazon.com/images/I/515qmR%2B4sjL._SL500_AA240_.jpg
It's hard to say what your question is, but there are some alternatives.
If you mean to literally execute a request using the ICMP ping protocol, you can get an ICMP library and execute the ping request directly. Google "Python ICMP" to find things like this icmplib. You might want to look at scapy, also.
This will be much faster than using os.system("ping " + ip ).
If you mean to generically "ping" a box to see if it's up, you can use the echo protocol on port 7.
For echo, you use the socket library to open the IP address and port 7. You write something on that port, send a carriage return ("\r\n") and then read the reply.
If you mean to "ping" a web site to see if the site is running, you have to use the http protocol on port 80.
For or properly checking a web server, you use urllib2 to open a specific URL. (/index.html is always popular) and read the response.
There are still more potential meaning of "ping" including "traceroute" and "finger".
I did something similar this way, as an inspiration:
import urllib
import threading
import time
def pinger_urllib(host):
"""
helper function timing the retrival of index.html
TODO: should there be a 1MB bogus file?
"""
t1 = time.time()
urllib.urlopen(host + '/index.html').read()
return (time.time() - t1) * 1000.0
def task(m):
"""
the actual task
"""
delay = float(pinger_urllib(m))
print '%-30s %5.0f [ms]' % (m, delay)
# parallelization
tasks = []
URLs = ['google.com', 'wikipedia.org']
for m in URLs:
t = threading.Thread(target=task, args=(m,))
t.start()
tasks.append(t)
# synchronization point
for t in tasks:
t.join()
Here's a short snippet using subprocess. The check_call method either returns 0 for success, or raises an exception. This way, I don't have to parse the output of ping. I'm using shlex to split the command line arguments.
import subprocess
import shlex
command_line = "ping -c 1 www.google.comsldjkflksj"
args = shlex.split(command_line)
try:
subprocess.check_call(args,stdout=subprocess.PIPE,stderr=subprocess.PIPE)
print "Website is there."
except subprocess.CalledProcessError:
print "Couldn't get a ping."
Most simple answer is:
import os
os.system("ping google.com")
I develop a library that I think could help you. It is called icmplib (unrelated to any other code of the same name that can be found on the Internet) and is a pure implementation of the ICMP protocol in Python.
It is completely object oriented and has simple functions such as the classic ping, multiping and traceroute, as well as low level classes and sockets for those who want to develop applications based on the ICMP protocol.
Here are some other highlights:
Can be run without root privileges.
You can customize many parameters such as the payload of ICMP packets and the traffic class (QoS).
Cross-platform: tested on Linux, macOS and Windows.
Fast and requires few CPU / RAM resources unlike calls made with subprocess.
Lightweight and does not rely on any additional dependencies.
To install it (Python 3.6+ required):
pip3 install icmplib
Here is a simple example of the ping function:
host = ping('1.1.1.1', count=4, interval=1, timeout=2, privileged=True)
if host.is_alive:
print(f'{host.address} is alive! avg_rtt={host.avg_rtt} ms')
else:
print(f'{host.address} is dead')
Set the "privileged" parameter to False if you want to use the library without root privileges.
You can find the complete documentation on the project page:
https://github.com/ValentinBELYN/icmplib
Hope you will find this library useful.
read a file name, the file contain the one url per line, like this:
http://www.poolsaboveground.com/apache/hadoop/core/
http://mirrors.sonic.net/apache/hadoop/core/
use command:
python url.py urls.txt
get the result:
Round Trip Time: 253 ms - mirrors.sonic.net
Round Trip Time: 245 ms - www.globalish.com
Round Trip Time: 327 ms - www.poolsaboveground.com
source code(url.py):
import re
import sys
import urlparse
from subprocess import Popen, PIPE
from threading import Thread
class Pinger(object):
def __init__(self, hosts):
for host in hosts:
hostname = urlparse.urlparse(host).hostname
if hostname:
pa = PingAgent(hostname)
pa.start()
else:
continue
class PingAgent(Thread):
def __init__(self, host):
Thread.__init__(self)
self.host = host
def run(self):
p = Popen('ping -n 1 ' + self.host, stdout=PIPE)
m = re.search('Average = (.*)ms', p.stdout.read())
if m: print 'Round Trip Time: %s ms -' % m.group(1), self.host
else: print 'Error: Invalid Response -', self.host
if __name__ == '__main__':
with open(sys.argv[1]) as f:
content = f.readlines()
Pinger(content)
import subprocess as s
ip=raw_input("Enter the IP/Domain name:")
if(s.call(["ping",ip])==0):
print "your IP is alive"
else:
print "Check ur IP"
If you want something actually in Python, that you can play with, have a look at Scapy:
from scapy.all import *
request = IP(dst="www.google.com")/ICMP()
answer = sr1(request)
That's in my opinion much better (and fully cross-platform), than some funky subprocess calls. Also you can have as much information about the answer (sequence ID.....) as you want, as you have the packet itself.
using system ping command to ping a list of hosts:
import re
from subprocess import Popen, PIPE
from threading import Thread
class Pinger(object):
def __init__(self, hosts):
for host in hosts:
pa = PingAgent(host)
pa.start()
class PingAgent(Thread):
def __init__(self, host):
Thread.__init__(self)
self.host = host
def run(self):
p = Popen('ping -n 1 ' + self.host, stdout=PIPE)
m = re.search('Average = (.*)ms', p.stdout.read())
if m: print 'Round Trip Time: %s ms -' % m.group(1), self.host
else: print 'Error: Invalid Response -', self.host
if __name__ == '__main__':
hosts = [
'www.pylot.org',
'www.goldb.org',
'www.google.com',
'www.yahoo.com',
'www.techcrunch.com',
'www.this_one_wont_work.com'
]
Pinger(hosts)
You can find an updated version of the mentioned script that works on both Windows and Linux here
using subprocess ping command to ping decode it because the response is binary:
import subprocess
ping_response = subprocess.Popen(["ping", "-a", "google.com"], stdout=subprocess.PIPE).stdout.read()
result = ping_response.decode('utf-8')
print(result)
you might try socket to get ip of the site and use scrapy to excute icmp ping to the ip.
import gevent
from gevent import monkey
# monkey.patch_all() should be executed before any library that will
# standard library
monkey.patch_all()
import socket
from scapy.all import IP, ICMP, sr1
def ping_site(fqdn):
ip = socket.gethostbyaddr(fqdn)[-1][0]
print(fqdn, ip, '\n')
icmp = IP(dst=ip)/ICMP()
resp = sr1(icmp, timeout=10)
if resp:
return (fqdn, False)
else:
return (fqdn, True)
sites = ['www.google.com', 'www.baidu.com', 'www.bing.com']
jobs = [gevent.spawn(ping_site, fqdn) for fqdn in sites]
gevent.joinall(jobs)
print([job.value for job in jobs])
On python 3 you can use ping3.
from ping3 import ping, verbose_ping
ip-host = '8.8.8.8'
if not ping(ip-host):
raise ValueError('{} is not available.'.format(ip-host))
If you only want to check whether a machine on an IP is active or not, you can just use python sockets.
import socket
s = socket.socket()
try:
s.connect(("192.168.1.123", 1234)) # You can use any port number here
except Exception as e:
print(e.errno, e)
Now, according to the error message displayed (or the error number), you can determine whether the machine is active or not.
Use this it's tested on python 2.7 and works fine it returns ping time in milliseconds if success and return False on fail.
import platform,subproccess,re
def Ping(hostname,timeout):
if platform.system() == "Windows":
command="ping "+hostname+" -n 1 -w "+str(timeout*1000)
else:
command="ping -i "+str(timeout)+" -c 1 " + hostname
proccess = subprocess.Popen(command, stdout=subprocess.PIPE)
matches=re.match('.*time=([0-9]+)ms.*', proccess.stdout.read(),re.DOTALL)
if matches:
return matches.group(1)
else:
return False
I am implementing a pipeline pattern with zeroMQ using the python bindings.
tasks are fanned out to workers which listen for new tasks with an infinite loop like this:
while True:
socks = dict(self.poller.poll())
if self.receiver in socks and socks[self.receiver] == zmq.POLLIN:
msg = self.receiver.recv_unicode(encoding='utf-8')
self.process(msg)
if self.hear in socks and socks[self.hear] == zmq.POLLIN:
msg = self.hear.recv()
print self.pid,":", msg
sys.exit(0)
they exit when they get a message from the sink node, confirming having received all the results expected.
however, worker may miss such a message and not finish. What is the best way to have workers always finish, when they have no way to know (other than through the already mentioned message, that there are no further tasks to process).
Here is the testing code I wrote for checking the workers status:
#-*- coding:utf-8 -*-
"""
Test module containing tests for all modules of pypln
"""
import unittest
from servers.ventilator import Ventilator
from subprocess import Popen, PIPE
import time
class testWorkerModules(unittest.TestCase):
def setUp(self):
self.nw = 4
#spawn 4 workers
self.ws = [Popen(['python', 'workers/dummy_worker.py'], stdout=None) for i in range(self.nw)]
#spawn a sink
self.sink = Popen(['python', 'sinks/dummy_sink.py'], stdout=None)
#start a ventilator
self.V = Ventilator()
# wait for workers and sinks to connect
time.sleep(1)
def test_send_unicode(self):
'''
Pushing unicode strings through workers to sinks.
'''
self.V.push_load([u'são joão' for i in xrange(80)])
time.sleep(1)
#[p.wait() for p in self.ws]#wait for the workers to terminate
wsr = [p.poll() for p in self.ws]
while None in wsr:
print wsr, [p.pid for p in self.ws if p.poll() == None] #these are the unfinished workers
time.sleep(0.5)
wsr = [p.poll() for p in self.ws]
self.sink.wait()
self.sink = self.sink.returncode
self.assertEqual([0]*self.nw, wsr)
self.assertEqual(0, self.sink)
if __name__ == '__main__':
unittest.main()
All the messaging stuff eventually ends up with heartbeats. If you (as a worker or a sink or whatever) discover that a component you need to work with is dead, you can basically either try to connect somewhere else or kill yourself. So if you as a worker discover that the sink is there no more, just exit. This also means that you may exit even though the sink is still there but the connection is broken. But I am not sure you can do more, perhaps set all the timeouts more reasonably...
How do I ping a website or IP address with Python?
See this pure Python ping by Matthew Dixon Cowles and Jens Diemer. Also, remember that Python requires root to spawn ICMP (i.e. ping) sockets in linux.
import ping, socket
try:
ping.verbose_ping('www.google.com', count=3)
delay = ping.Ping('www.wikipedia.org', timeout=2000).do()
except socket.error, e:
print "Ping Error:", e
The source code itself is easy to read, see the implementations of verbose_ping and of Ping.do for inspiration.
Depending on what you want to achive, you are probably easiest calling the system ping command..
Using the subprocess module is the best way of doing this, although you have to remember the ping command is different on different operating systems!
import subprocess
host = "www.google.com"
ping = subprocess.Popen(
["ping", "-c", "4", host],
stdout = subprocess.PIPE,
stderr = subprocess.PIPE
)
out, error = ping.communicate()
print out
You don't need to worry about shell-escape characters. For example..
host = "google.com; `echo test`
..will not execute the echo command.
Now, to actually get the ping results, you could parse the out variable. Example output:
round-trip min/avg/max/stddev = 248.139/249.474/250.530/0.896 ms
Example regex:
import re
matcher = re.compile("round-trip min/avg/max/stddev = (\d+.\d+)/(\d+.\d+)/(\d+.\d+)/(\d+.\d+)")
print matcher.search(out).groups()
# ('248.139', '249.474', '250.530', '0.896')
Again, remember the output will vary depending on operating system (and even the version of ping). This isn't ideal, but it will work fine in many situations (where you know the machines the script will be running on)
You may find Noah Gift's presentation Creating Agile Commandline Tools With Python. In it he combines subprocess, Queue and threading to develop solution that is capable of pinging hosts concurrently and speeding up the process. Below is a basic version before he adds command line parsing and some other features. The code to this version and others can be found here
#!/usr/bin/env python2.5
from threading import Thread
import subprocess
from Queue import Queue
num_threads = 4
queue = Queue()
ips = ["10.0.1.1", "10.0.1.3", "10.0.1.11", "10.0.1.51"]
#wraps system ping command
def pinger(i, q):
"""Pings subnet"""
while True:
ip = q.get()
print "Thread %s: Pinging %s" % (i, ip)
ret = subprocess.call("ping -c 1 %s" % ip,
shell=True,
stdout=open('/dev/null', 'w'),
stderr=subprocess.STDOUT)
if ret == 0:
print "%s: is alive" % ip
else:
print "%s: did not respond" % ip
q.task_done()
#Spawn thread pool
for i in range(num_threads):
worker = Thread(target=pinger, args=(i, queue))
worker.setDaemon(True)
worker.start()
#Place work in queue
for ip in ips:
queue.put(ip)
#Wait until worker threads are done to exit
queue.join()
He is also author of: Python for Unix and Linux System Administration
http://ecx.images-amazon.com/images/I/515qmR%2B4sjL._SL500_AA240_.jpg
It's hard to say what your question is, but there are some alternatives.
If you mean to literally execute a request using the ICMP ping protocol, you can get an ICMP library and execute the ping request directly. Google "Python ICMP" to find things like this icmplib. You might want to look at scapy, also.
This will be much faster than using os.system("ping " + ip ).
If you mean to generically "ping" a box to see if it's up, you can use the echo protocol on port 7.
For echo, you use the socket library to open the IP address and port 7. You write something on that port, send a carriage return ("\r\n") and then read the reply.
If you mean to "ping" a web site to see if the site is running, you have to use the http protocol on port 80.
For or properly checking a web server, you use urllib2 to open a specific URL. (/index.html is always popular) and read the response.
There are still more potential meaning of "ping" including "traceroute" and "finger".
I did something similar this way, as an inspiration:
import urllib
import threading
import time
def pinger_urllib(host):
"""
helper function timing the retrival of index.html
TODO: should there be a 1MB bogus file?
"""
t1 = time.time()
urllib.urlopen(host + '/index.html').read()
return (time.time() - t1) * 1000.0
def task(m):
"""
the actual task
"""
delay = float(pinger_urllib(m))
print '%-30s %5.0f [ms]' % (m, delay)
# parallelization
tasks = []
URLs = ['google.com', 'wikipedia.org']
for m in URLs:
t = threading.Thread(target=task, args=(m,))
t.start()
tasks.append(t)
# synchronization point
for t in tasks:
t.join()
Here's a short snippet using subprocess. The check_call method either returns 0 for success, or raises an exception. This way, I don't have to parse the output of ping. I'm using shlex to split the command line arguments.
import subprocess
import shlex
command_line = "ping -c 1 www.google.comsldjkflksj"
args = shlex.split(command_line)
try:
subprocess.check_call(args,stdout=subprocess.PIPE,stderr=subprocess.PIPE)
print "Website is there."
except subprocess.CalledProcessError:
print "Couldn't get a ping."
Most simple answer is:
import os
os.system("ping google.com")
I develop a library that I think could help you. It is called icmplib (unrelated to any other code of the same name that can be found on the Internet) and is a pure implementation of the ICMP protocol in Python.
It is completely object oriented and has simple functions such as the classic ping, multiping and traceroute, as well as low level classes and sockets for those who want to develop applications based on the ICMP protocol.
Here are some other highlights:
Can be run without root privileges.
You can customize many parameters such as the payload of ICMP packets and the traffic class (QoS).
Cross-platform: tested on Linux, macOS and Windows.
Fast and requires few CPU / RAM resources unlike calls made with subprocess.
Lightweight and does not rely on any additional dependencies.
To install it (Python 3.6+ required):
pip3 install icmplib
Here is a simple example of the ping function:
host = ping('1.1.1.1', count=4, interval=1, timeout=2, privileged=True)
if host.is_alive:
print(f'{host.address} is alive! avg_rtt={host.avg_rtt} ms')
else:
print(f'{host.address} is dead')
Set the "privileged" parameter to False if you want to use the library without root privileges.
You can find the complete documentation on the project page:
https://github.com/ValentinBELYN/icmplib
Hope you will find this library useful.
read a file name, the file contain the one url per line, like this:
http://www.poolsaboveground.com/apache/hadoop/core/
http://mirrors.sonic.net/apache/hadoop/core/
use command:
python url.py urls.txt
get the result:
Round Trip Time: 253 ms - mirrors.sonic.net
Round Trip Time: 245 ms - www.globalish.com
Round Trip Time: 327 ms - www.poolsaboveground.com
source code(url.py):
import re
import sys
import urlparse
from subprocess import Popen, PIPE
from threading import Thread
class Pinger(object):
def __init__(self, hosts):
for host in hosts:
hostname = urlparse.urlparse(host).hostname
if hostname:
pa = PingAgent(hostname)
pa.start()
else:
continue
class PingAgent(Thread):
def __init__(self, host):
Thread.__init__(self)
self.host = host
def run(self):
p = Popen('ping -n 1 ' + self.host, stdout=PIPE)
m = re.search('Average = (.*)ms', p.stdout.read())
if m: print 'Round Trip Time: %s ms -' % m.group(1), self.host
else: print 'Error: Invalid Response -', self.host
if __name__ == '__main__':
with open(sys.argv[1]) as f:
content = f.readlines()
Pinger(content)
import subprocess as s
ip=raw_input("Enter the IP/Domain name:")
if(s.call(["ping",ip])==0):
print "your IP is alive"
else:
print "Check ur IP"
If you want something actually in Python, that you can play with, have a look at Scapy:
from scapy.all import *
request = IP(dst="www.google.com")/ICMP()
answer = sr1(request)
That's in my opinion much better (and fully cross-platform), than some funky subprocess calls. Also you can have as much information about the answer (sequence ID.....) as you want, as you have the packet itself.
using system ping command to ping a list of hosts:
import re
from subprocess import Popen, PIPE
from threading import Thread
class Pinger(object):
def __init__(self, hosts):
for host in hosts:
pa = PingAgent(host)
pa.start()
class PingAgent(Thread):
def __init__(self, host):
Thread.__init__(self)
self.host = host
def run(self):
p = Popen('ping -n 1 ' + self.host, stdout=PIPE)
m = re.search('Average = (.*)ms', p.stdout.read())
if m: print 'Round Trip Time: %s ms -' % m.group(1), self.host
else: print 'Error: Invalid Response -', self.host
if __name__ == '__main__':
hosts = [
'www.pylot.org',
'www.goldb.org',
'www.google.com',
'www.yahoo.com',
'www.techcrunch.com',
'www.this_one_wont_work.com'
]
Pinger(hosts)
You can find an updated version of the mentioned script that works on both Windows and Linux here
using subprocess ping command to ping decode it because the response is binary:
import subprocess
ping_response = subprocess.Popen(["ping", "-a", "google.com"], stdout=subprocess.PIPE).stdout.read()
result = ping_response.decode('utf-8')
print(result)
you might try socket to get ip of the site and use scrapy to excute icmp ping to the ip.
import gevent
from gevent import monkey
# monkey.patch_all() should be executed before any library that will
# standard library
monkey.patch_all()
import socket
from scapy.all import IP, ICMP, sr1
def ping_site(fqdn):
ip = socket.gethostbyaddr(fqdn)[-1][0]
print(fqdn, ip, '\n')
icmp = IP(dst=ip)/ICMP()
resp = sr1(icmp, timeout=10)
if resp:
return (fqdn, False)
else:
return (fqdn, True)
sites = ['www.google.com', 'www.baidu.com', 'www.bing.com']
jobs = [gevent.spawn(ping_site, fqdn) for fqdn in sites]
gevent.joinall(jobs)
print([job.value for job in jobs])
On python 3 you can use ping3.
from ping3 import ping, verbose_ping
ip-host = '8.8.8.8'
if not ping(ip-host):
raise ValueError('{} is not available.'.format(ip-host))
If you only want to check whether a machine on an IP is active or not, you can just use python sockets.
import socket
s = socket.socket()
try:
s.connect(("192.168.1.123", 1234)) # You can use any port number here
except Exception as e:
print(e.errno, e)
Now, according to the error message displayed (or the error number), you can determine whether the machine is active or not.
Use this it's tested on python 2.7 and works fine it returns ping time in milliseconds if success and return False on fail.
import platform,subproccess,re
def Ping(hostname,timeout):
if platform.system() == "Windows":
command="ping "+hostname+" -n 1 -w "+str(timeout*1000)
else:
command="ping -i "+str(timeout)+" -c 1 " + hostname
proccess = subprocess.Popen(command, stdout=subprocess.PIPE)
matches=re.match('.*time=([0-9]+)ms.*', proccess.stdout.read(),re.DOTALL)
if matches:
return matches.group(1)
else:
return False