I just setup PyDev with Eclipse, but I'm a little confused. I thought that in the console I would be able to type certain commands such as print("Hello World") and directly observe the result without having to incorporate that in any sort of file.
The reason I would like this is because it would allow me to test functions real quick before using them in scripts, and I'm also following a tutorial which tells me to check if NumPy is installed by typing import NumPy in the command line.
Thanks!
There should be an interactive console in PyDev.
Try Ctrl+Alt+Enter or Cmd+Alt+Enter.
Open up terminal and type python then it should load python shell then type
import numpy
I have used pydev and find its easier just to use terminal to run small commands
When debugging Python script using ipdb my_script.py, I want to use IPython magic functions like %paste, %cd in ipdb debug session shell. Is is possible and how?
According to the ipdb Github repo magic IPython functions are not available. Fortunately, the IPython debugger provides a couple of clues of how to get this functionality without launching a separate IPython shell.
Here is what I did to run %cpaste:
ipdb> from IPython import get_ipython
ipdb> shell = get_ipython()
ipdb> shell.find_line_magic('cpaste')()
Pasting code; enter '--' alone on the line to stop or use Ctrl-D.
:for i in range(0,5):
: print i
:--
0
1
2
3
4
This way, you can step through your code and have access to all the IPython magic functions via the method find_line_magic(your_magic_function).
You can open a IPython shell inside a stack, just like pdb does. Do the following:
Import embed() from IPython, and put it inside your code.
Run the script
Example:
from IPython import embed
def some_func():
i = 0
embed()
return 0
In Python shell:
>>> te.func()
IPython 1.0.0 -- An enhanced Interactive Python.
(...)
In [1]: %whos
Variable Type Data/Info
i int 0
In [2]:
Was that what you were looking for?
In Java/C# you can easily step through code to trace what might be going wrong, and IDE's make this process very user friendly.
Can you trace through python code in a similar fashion?
Yes! There's a Python debugger called pdb just for doing that!
You can launch a Python program through pdb by using pdb myscript.py or python -m pdb myscript.py.
There are a few commands you can then issue, which are documented on the pdb page.
Some useful ones to remember are:
b: set a breakpoint
c: continue debugging until you hit a breakpoint
s: step through the code
n: to go to next line of code
l: list source code for the current file (default: 11 lines including the line being executed)
u: navigate up a stack frame
d: navigate down a stack frame
p: to print the value of an expression in the current context
If you don't want to use a command line debugger, some IDEs like Pydev, Wing IDE or PyCharm have a GUI debugger. Wing and PyCharm are commercial products, but Wing has a free "Personal" edition, and PyCharm has a free community edition.
By using Python Interactive Debugger 'pdb'
First step is to make the Python interpreter to enter into the debugging mode.
A. From the Command Line
Most straight forward way, running from command line, of python interpreter
$ python -m pdb scriptName.py
> .../pdb_script.py(7)<module>()
-> """
(Pdb)
B. Within the Interpreter
While developing early versions of modules and to experiment it more iteratively.
$ python
Python 2.7 (r27:82508, Jul 3 2010, 21:12:11)
[GCC 4.0.1 (Apple Inc. build 5493)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import pdb_script
>>> import pdb
>>> pdb.run('pdb_script.MyObj(5).go()')
> <string>(1)<module>()
(Pdb)
C. From Within Your Program
For a big project and long-running module, can start the debugging from inside the program using
import pdb and set_trace()
like this :
#!/usr/bin/env python
# encoding: utf-8
#
import pdb
class MyObj(object):
count = 5
def __init__(self):
self.count= 9
def go(self):
for i in range(self.count):
pdb.set_trace()
print i
return
if __name__ == '__main__':
MyObj(5).go()
Step-by-Step debugging to go into more internal
Execute the next statement… with “n” (next)
Repeating the last debugging command… with ENTER
Quitting it all… with “q” (quit)
Printing the value of variables… with “p” (print)
a) p a
Turning off the (Pdb) prompt… with “c” (continue)
Seeing where you are… with “l” (list)
Stepping into subroutines… with “s” (step into)
Continuing… but just to the end of the current subroutine… with “r” (return)
Assign a new value
a) !b = "B"
Set a breakpoint
a) break linenumber
b) break functionname
c) break filename:linenumber
Temporary breakpoint
a) tbreak linenumber
Conditional breakpoint
a) break linenumber, condition
Note:**All these commands should be execute from **pdb
For in-depth knowledge, refer:-
https://pymotw.com/2/pdb/
https://pythonconquerstheuniverse.wordpress.com/2009/09/10/debugging-in-python/
There is a module called 'pdb' in python. At the top of your python script you do
import pdb
pdb.set_trace()
and you will enter into debugging mode. You can use 's' to step, 'n' to follow next line similar to what you would do with 'gdb' debugger.
Starting in Python 3.7, you can use the breakpoint() built-in function to enter the debugger:
foo()
breakpoint() # drop into the debugger at this point
bar()
By default, breakpoint() will import pdb and call pdb.set_trace(). However, you can control debugging behavior via sys.breakpointhook() and use of the environment variable PYTHONBREAKPOINT.
See PEP 553 for more information.
ipdb (IPython debugger)
ipdb adds IPython functionality to pdb, offering the following HUGE improvements:
tab completion
show more context lines
syntax highlight
Much like pdg, ipdb is still far from perfect and completely rudimentary if compared to GDB, but it is already a huge improvement over pdb.
Usage is analogous to pdb, just install it with:
python3 -m pip install --user ipdb
and then add to the line you want to step debug from:
__import__('ipdb').set_trace(context=21)
You likely want to add a shortcut for that from your editor, e.g. for Vim snipmate I have:
snippet ipd
__import__('ipdb').set_trace(context=21)
so I can type just ipd<tab> and it expands to the breakpoint. Then removing it is easy with dd since everything is contained in a single line.
context=21 increases the number of context lines as explained at: How can I make ipdb show more lines of context while debugging?
Alternatively, you can also debug programs from the start with:
ipdb3 main.py
but you generally don't want to do that because:
you would have to go through all function and class definitions as Python reads those lines
I don't know how to set the context size there without hacking ipdb. Patch to allow it: https://github.com/gotcha/ipdb/pull/155
Or alternatively, as in raw pdb 3.2+ you can set some breakpoints from the command line:
ipdb3 -c 'b 12' -c 'b myfunc' ~/test/a.py
although -c c is broken for some reason: https://github.com/gotcha/ipdb/issues/156
python -m module debugging has been asked at: How to debug a Python module run with python -m from the command line? and since Python 3.7 can be done with:
python -m pdb -m my_module
Serious missing features of both pdb and ipdb compared to GDB:
persistent command history across sessions: Save command history in pdb
ipdb specific annoyances:
multithreading does not work well if you don't hack some settings...
ipdb, multiple threads and autoreloading programs causing ProgrammingError
https://github.com/gotcha/ipdb/issues/51
Tested in Ubuntu 16.04, ipdb==0.11, Python 3.5.2.
VSCode
If you want to use an IDE, this is a good alternative to PyCharm.
Install VSCode
Install the Python extension, if it's not already installed
Create a file mymodule.py with Python code
To set a breakpoint, hover over a line number and click the red dot, or press F9
Hit F5 to start debugging and select Python File
It will stop at the breakpoint and you can do your usual debugging stuff like inspecting the values of variables, either at the tab VARIABLES (usually on the left) or by clicking on Debug Console (usually at the bottom next to your Terminal):
This screenshot shows VSCodium.
More information
Python debugging in VS Code
Getting Started with Python in VS Code
Debugging in Visual Studio Code
There exist breakpoint() method nowadays, which replaces import pdb; pdb.set_trace().
It also has several new features, such as possible environment variables.
Python Tutor is an online single-step debugger meant for novices. You can put in code on the edit page then click "Visualize Execution" to start it running.
Among other things, it supports:
hiding variables, e.g. to hide a variable named x, put this at the end:
#pythontutor_hide: x
saving/sharing
a few other languages like Java, JS, Ruby, C, C++
However it also doesn't support a lot of things, for example:
Reading/writing files - use io.StringIO and io.BytesIO instead: demo
Code that is too large, runs too long, or defines too many variables or objects
Command-line arguments
Lots of standard library modules like argparse, csv, enum, html, os, sys, weakref...
Python 3.7+
Let's take look at what breakpoint() can do for you in 3.7+.
I have installed ipdb and pdbpp, which are both enhanced debuggers, via
pip install pdbpp
pip install ipdb
My test script, really doesn't do much, just calls breakpoint().
#test_188_breakpoint.py
myvars=dict(foo="bar")
print("before breakpoint()")
breakpoint() # 👈
print(f"after breakpoint myvars={myvars}")
breakpoint() is linked to the PYTHONBREAKPOINT environment variable.
CASE 1: disabling breakpoint()
You can set the variable via bash as usual
export PYTHONBREAKPOINT=0
This turns off breakpoint() where it does nothing (as long as you haven't modified sys.breakpointhook() which is outside of the scope of this answer).
This is what a run of the program looks like:
(venv38) myuser#explore$ export PYTHONBREAKPOINT=0
(venv38) myuser#explore$ python test_188_breakpoint.py
before breakpoint()
after breakpoint myvars={'foo': 'bar'}
(venv38) myuser#explore$
Didn't stop, because I disabled breakpoint. Something that pdb.set_trace() can't do 😀😀😀!
CASE 2: using the default pdb behavior:
Now, let's unset PYTHONBREAKPOINT which puts us back to normal, enabled-breakpoint behavior (it's only disabled when 0 not when empty).
(venv38) myuser#explore$ unset PYTHONBREAKPOINT
(venv38) myuser#explore$ python test_188_breakpoint.py
before breakpoint()
[0] > /Users/myuser/kds2/wk/explore/test_188_breakpoint.py(6)<module>()
-> print(f"after breakpoint myvars={myvars}")
(Pdb++) print("pdbpp replaces pdb because it was installed")
pdbpp replaces pdb because it was installed
(Pdb++) c
after breakpoint myvars={'foo': 'bar'}
It stopped, but I actually got pdbpp because it replaces pdb entirely while installed. If I unistalled pdbpp, I'd be back to normal pdb.
Note: a standard pdb.set_trace() would still get me pdbpp
CASE 3: calling a custom debugger
But let's call ipdb instead. This time, instead of setting the environment variable, we can use bash to set it only for this one command.
(venv38) myuser#explore$ PYTHONBREAKPOINT=ipdb.set_trace py test_188_breakpoint.py
before breakpoint()
> /Users/myuser/kds2/wk/explore/test_188_breakpoint.py(6)<module>()
5 breakpoint()
----> 6 print(f"after breakpoint myvars={myvars}")
7
ipdb> print("and now I invoked ipdb instead")
and now I invoked ipdb instead
ipdb> c
after breakpoint myvars={'foo': 'bar'}
Essentially, what it does, when looking at $PYTHONBREAKPOINT:
from ipdb import set_trace # function imported on the right-most `.`
set_trace()
Again, much cleverer than a plain old pdb.set_trace() 😀😀😀
in practice? I'd probably settle on a debugger.
Say I want ipdb always, I would:
export it via .profile or similar.
disable on a command by command basis, without modifying the normal value
Example (pytest and debuggers often make for unhappy couples):
(venv38) myuser#explore$ export PYTHONBREAKPOINT=ipdb.set_trace
(venv38) myuser#explore$ echo $PYTHONBREAKPOINT
ipdb.set_trace
(venv38) myuser#explore$ PYTHONBREAKPOINT=0 pytest test_188_breakpoint.py
=================================== test session starts ====================================
platform darwin -- Python 3.8.6, pytest-5.1.2, py-1.9.0, pluggy-0.13.1
rootdir: /Users/myuser/kds2/wk/explore
plugins: celery-4.4.7, cov-2.10.0
collected 0 items
================================== no tests ran in 0.03s ===================================
(venv38) myuser#explore$ echo $PYTHONBREAKPOINT
ipdb.set_trace
p.s.
I'm using bash under macos, any posix shell will behave substantially the same. Windows, either powershell or DOS, may have different capabilities, especially around PYTHONBREAKPOINT=<some value> <some command> to set a environment variable only for one command.
If you come from Java/C# background I guess your best bet would be to use Eclipse with Pydev. This gives you a fully functional IDE with debugger built in. I use it with django as well.
https://wiki.python.org/moin/PythonDebuggingTools
pudb is a good drop-in replacement for pdb
PyCharm is an IDE for Python that includes a debugger. Watch this YouTube video for an introduction on using it to step through code:
PyCharm Tutorial - Debug python code using PyCharm (the debugging starts at 6:34)
Note: PyCharm is a commercial product, but the company does provide a free license to students and teachers, as well as a "lightweight" Community version that is free and open-source.
If you want an IDE with integrated debugger, try PyScripter.
Programmatically stepping and tracing through python code is possible too (and its easy!). Look at the sys.settrace() documentation for more details. Also here is a tutorial to get you started.
Visual Studio with PTVS could be an option for you: http://www.hanselman.com/blog/OneOfMicrosoftsBestKeptSecretsPythonToolsForVisualStudioPTVS.aspx
Suppose I have a script that does a lot of stuff, and doesn't work well somewhere near the end. I'd love to be able to add a start_ipython() function at that point, which would stop the script at this point, and let me inspect variables and so on with ipython. How can I do this?
Note that this has changed in IPython-0.11. Instead of what is described below, simply use the following import:
from IPython import embed as shell
The answer below works for IPython versions prior to 0.11.
In the region where you want to drop into ipython, define this
def start_ipython():
from IPython.Shell import IPShellEmbed
shell = IPShellEmbed()
shell()
and call start_ipython where you want to drop into the interpreter.
This will drop you into an interpreter and will preserve the locals() at that point.
If you want a regular shell, do this
def start_python():
import code
code.interact()
Check the documentation for the above functions for details. I'd recommend that you try the ipython one and if it throws an ImportError, switch to normal so that it will work even if ipython is not installed.
Easiest way is to use the built-in debugger. At the point you want execution to stop, just do:
import pdb; pdb.set_trace()
and you'll be dumped into the pdb shell, which allows you to inspect variables and change them.
There is also an external ipdb package which you can get via easy_install which should work the same way.
I would like to be able to drop to the python REPL from the debugger -- if this is not possible is there an easier way to evaluate python expressions in the context of the current breakpoint other than manually adding them all as watch expressions?
There is a dedicated Pydev Console available by clicking on the "New console" dropdown in the console view.
See http://pydev.sourceforge.net/console.html
I don't use pydev, but to drop to python's interactive REPL from code:
import code
code.interact(local=locals())
To drop to python's debugger from code:
import pdb
pdb.set_trace()
Finally, to run a interactive REPL after running some code, you can use python's -i switch:
python -i script.py
That will give you a python prompt after the code, even if it throws an exception.
You may be able to hook some of those solutions into pydev, I think.
As Dag Høidahl said, the PyDev Console is actually the best option (at least on Eclipse Indigo), no need to hack around.
Just go to Open Console:
Then select PyDev Console:
If you need to add specific parameters (for example, Jython tends to miss the python.os VM property), you can change them under Window -> Properties -> PyDev -> Interactive Console.