We Keep Coding

Problem running auto py to exe from terminal [duplicate]

I have python 3.9 I used the command 'pip install auto-py-to-exe' and it downloaded but when I tried to using the command 'auto-py-to-exe' the program just said " 'auto-py-to-exe' is not recognized as an internal or external command, operable program or batch file.". I have the latest version of PIP and I also have PATH. What can I do to fix this?

This works on VSCode:
python -m auto_py_to_exe

If I install "auto-py-to-exe" using following command, as described in this link as well as from the comment from Justin Ezequiel (above):
python -m pip install auto-py-to-exe
I am able to run it (in Windows 10) using following command:
python -m auto_py_to_exe

This gave me quite a bit of trouble, as none of the above solutions worked for me. Spent lots of time trying to figure out what I should be adding to PATH with no success.
My issue stemmed from (I think) the fact that I have been using python downloaded from the windows store, which uses a different location to store python in.
With the manual install of python (https://www.python.org) you can specify where python is downloaded and automatically add that location to path.
Steps I took to solve the problem:
Uninstall all versions of python downloaded from the windows store via settings (settings > apps > python > uninstall)
Uninstall all version of python via the control panel (control panel > add or remove programs > python x.x.x > uninstall)
Uninstall auto-py-to-exe (pip uninstall auto-py-to-exe) in case it didnt do that automatically
Install python from python.org. (auto-py-to-exe is not supported in versions greater than 3.10 as of 1/23/2023). So I installed Python 3.10
The settings which were successful for me were:
Custom installation,
check install python for all users,
check add to path,
input 'C:\Python310' (with the respective version number) for install location,
install
Check new python version has been installed python --version
Check pip is installed pip --version
Install auto-py-to-exe pip install auto-py-to-exe
When auto-py-to-exe finishes installing, scroll up through the install info and make sure there are no warnings that state there is a location not found in PATH. If there are, you'll have to do some other research on adding those locations to PATH appropriately (since I don't think I was doing that right).
Assuming no PATH warnings,
9. Run auto-py-to-exe

First you need to type in the terminal (not Python):
auto-py-to-exe
If you are currently in python use exit() to exit then try the above code.

It Depends on in which environment you have installed
Make sure to replace {User} with your user
In Conda Enviournment go to below location Manually
C:\Users\{User}\anaconda3\Scripts\auto-py-to-exe.exe
In Pip, Environment go to the location below
C:\Users\{User}\AppData\Local\Programs\Python\Python37-32\Scripts\auto-py-to-exe.exe
or you can add this path to your environment variable as well for accessing these from anywhere

First check you installed it
pip install auto-py-to-exe
then restart your vscode and check another time.
If still an error, check it in CMD.

As suggested above use:
pip show --files auto-py-to-exe to find out in what directory pip has
installed the scripts. Double check the directory is in %PATH%
This will show you where the installer has placed the binary files. I then changed to that directory which circumvents any path issue. I tried to run the files and found :
OSError: [WinError 1920] The file cannot be accessed by the system: 'C:\\Users\\aaaa\\AppData\\Local\\Microsoft\\WindowsApps\\PythonSoftwareFoundation.Python.3.7_qbz5n2kfra8p0\\python.exe'
PS C:\users\aaaa\appdata\local\packages\pythonsoftwarefoundation.python.3.7_qbz5n2kfra8p0\localcache\local-packages\python37\Scripts>
In my case, although I haven't worked out how to fix it yet... It would seem to be trying to refer to an incorrect Python executable, the files in that directory are all 0 length. Unfortunately the "python -m" suggestion didn't work for me, so it's back to the drawing board. Hope that helps you confirm if it's the right solution to chase down.

You need to make sure you have typed cd C:\Users\your_user_name\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.9_qbz5n2kfra8p0\LocalCache\local-packages\Python39\Scripts as a separate command, and then auto-py-to-exe with python 3. Check in file explorer to make sure your path is correct if the cd fails.

Import module could not be resolved

I've successfully installed "PyPDF2" module and checked it using the command 'pip list'.
yet when I try to import it i receive this message:
'''Import "PyPDF2" could not be resolved'''

The version of python that you installed the module in and the version that your IDE is using might be different check what version you installed it in by typing
pip -VV
in your terminal and check in what version your IDE is using (for vs code its usually shown at the bottom left or can be seen in the command pallete by typing Python: Select Interpreter)
another reason this could happen is if you are using an IDE like pycharm which by default creates a virtual environment for each project in which case you would need to either install your module from pycharm's terminal or activate the virtual environment and then install in it (docs here show how to https://docs.python.org/3/tutorial/venv.html)

Make sure you have installed PyPDF2
pip install PyPDF2
Select the correct interpreter
Click

First of all, please make sure that you are using the correct environment and python interpreter. If multiple python versions exist on your computer, use the command to install the PyPDF2 package under the version you need. For example python3:
py -3 -m pip install PyPDF2
Another possible reason: Paths are not imported correctly. Please add the following commands in the setting.json file:
"python.analysis.extraPaths":[
// The folder path where the custom module is located, and multiple paths can be added (the following is just an example)
// absolute path
"c:\\workspace\\pythontest\\.venv\\lib\\site-packages",
"E:\\myfolder\\homework\\one\\Person_reID_baseline_pytorch-master",
// relative path
"./src",
"./modules"
]

Issues installing Cantera on Python

I am trying to use Cantera on python. I downloaded Anaconda and followed the instructions on Cantera's website to install. Their website's tutorial says to write:
import cantera as ct
import numpy as np
When I run it, I get the error:
ModuleNotFoundError: No module named 'cantera'
I tried reinstalling everything.

The error ModuleNotFoundError: No module named 'cantera' implies that you have not succesfully installed the 'cantera' module. You stated you downloaded anaconda then followed the install procedure here?
Can you please show me what the output was for this, if there was an error or admin block then cantera was never installed and that is why you can't import it.

You might not be activating your environment. Activate it first in the command prompt and then try to import the modules.

Without knowing the complete detail, my guess is that when you start a new project with Pycharm, it offers to create a new environment for you (See the image below).
An environment acts as an isolated container of packages and multiple environments can be setup (over simplification). By default, when creating a new environment it will only install the default packages with Anaconda and my guess is that Cantera is not a part of that list.
Now you've got two options:
Specifically install the package in the new environment you created:
Click on File -> Settings -> Project -> Project Interpreter
Click the + button on the right hand side of the package list and then look for the package you want to install. It should be installed to your specified environment.
Change the environment to the default anaconda env:
Click on File -> Settings -> Project -> Project Interpreter
In the Project Interpreter drop down, select the default anaconda interpreter. You can look at the packages installed in that env and find if your specific package is there or not. If the package is still not there, you could go ahead and install it using the previous method.

I have gone through a large amount of pain to eventually conclude that:
Cantera 2.4 will work only with Python 2.7, and a new Python 2.7 environment within Anaconda can be used to install it, though I didn't find this written clearly:Cantera Release Notes
To install and run Cantera 2.4:
Create and activate a Python 2.7 environment: Anaconda Documentation
Run the command: conda install -c cantera cantera (first iteration may fail to solve) - Anaconda Documentation
View your Python 2 environment packages in in Anaconda and you will see it listed.

Module not found error in VS code despite the fact that I installed it

I'm trying to debug some python code using VS code. I'm getting the following error about a module that I am sure is installed.
Exception has occurred: ModuleNotFoundError
No module named 'SimpleITK'
File "C:\Users\Mido\Desktop\ProstateX-project\src\01-preprocessing\03_resample_nifti.py", line 8, in <module>
import SimpleITK as sitk
I installed the module using
sudo pip install SimpleITK
I know that it was installed because I was getting a similar error when I ran the code through the command line, and it was fixed by doing the above. I don't understand why VS code does not recognize that

After installing a new module via pip reloading vscode may work if vscode doesn't recognize it. To do this, make sure that the module is installed inside the virtual environment by creating and activating a virtualenv:
python3 -m venv env
source env/bin/activate
Make sure to use the correct way of installing a module with pip:
python3 -m pip install {new_module}
Replace the string "{new_module}" with your module name. After that, make sure to reload vscode by clicking Ctrl+Shift+P, and selecting Reload window.
Now vscode will know the new module and autocompletion works.

sudo pip install is most likely installing globally into a Python interpreter that is different than the one that you have selected in VS Code. Please select the Python interpreter you want to use and then install explicitly using that interpreter (if you're not using a virtual environment then use something like /path/to/python -m pip install SimpleITK, although I strongly recommend using a virtual environment and to not install packages globally).

In Mac, correctly selecting the Python Interpreter worked for me:
From within VS Code, select a Python 3 interpreter by opening the Command Palette (⇧⌘P), start typing the Python: Select Interpreter command to search, then select the command. You can also use the Select Python Environment option on the Status Bar if available (it may already show a selected interpreter, too):
No interpreter selected
The command presents a list of available interpreters that VS Code can find automatically, including virtual environments. If you don't see the desired interpreter, see Configuring Python environments.
Source :VS Code Select Interpreter

This error: your vscode use other python version. This solution change vscode use current python.
In terminal find current python version:
py --version
In vscode Press Ctrl+Shift+P then type:
Python: Select Interpreter
Select current python version

I ran into this problem with VSCode and resolved it by setting my Python interpreter within VSCode to the same as the one in my system path (type "echo %PATH%" on Windows and look for Python) via the process here: https://code.visualstudio.com/docs/python/python-tutorial#_select-a-python-interpreter

There are a lot of proposed answers that suggest changing the launch.json or the settings.json file. However, neither of these solutions worked for me.
My situation:
Is Python environment selected? yes
Does the Terminal recognize Python environment? yes
Can I run the Python code from the activated Terminal? yes
Does the code run w/o error when I use "Start Debugging"? yes
Does the code run when I click "Run Code"? no
The only solution that worked for me is to:
Open Windows Terminal (or cmd)
Activate environment: conda activate <environment_name>
Open Visual Studio Code from Terminal: code
Then, "Run Code" (#5) works without any issues.
Source:
"module not found error" in VS Code using Conda - l3d00m's answer

Faced similar issue and here is how I fixed it. Remember that there are multiple ways to run your code in VS code. And for each way you may end up with different interpreters and environments. For example:
1. Creating virtual env and installing libraries
In my case I opted into creating virtual environment and doing so outside of VS Code using command prompt:
python -m venv .plotting_test
Following that I activated it:
.plotting_test\Scripts\activate.bat
Following that I installed additional libraries:
python -m pip install matplotlib
Following that I made sure to see it was all installed ok:
python -m pip list
And I also checked where for current directory:
cd
2. Point VS Code & VS Code Code Runner to virtual environment
Opened vs code, closed previous workspaces, opened new folder, created test.py as I was starting new. Pressed ctrl + shift + p. Selected ```Python: Select Interpreter``:
Followed by + Enter interpreted path
Navigated to directory from last step from section 1. Found my virtual environment folder created in step one and pointed VS code to that version's python.exe in Scripts:
Verified I am pointed to such:
Saved as workspace so that I can create default workspace settings for this project:
In workspace settings files defined paths to my virtual environment created n step 1 for workspace interpreter & CODE RUNNER(!):
"settings": {
"python.defaultInterpreterPath": "C:/Users/yyguy/.plotting_test/Scripts/python.exe",
"code-runner.executorMap": {"python": "call C:/Users/yyguy/.plotting_test/Scripts/activate.bat && python -u"}
}
}
Reloaded window just to make sure (ctrl + shift + p) = "Developer: Reload Window"
Now run code and run python file should be execute under your specified envs:

Try running pip list in VS Code to check if the module is installed, next check if your python version is correct/supports that version of SimpleITK. It may be a problem with the python interpreter that you are using for VS Code (ie. the module may be installed on a different python instance than the one your VS Code is using)

Is Python environment selected?
Does the Terminal recognize the Python environment?
Can I run the Python code from the activated Terminal?
Does the code run w/o error when I use "Start Debugging"?
if the answer to the above is "yes."
Then,
Try running the Code using the option "Run python file in terminal" (in code runner extension). And assign a new shortcut for that for future use...

How to fix module not found error in Visual Studio code?
To Solve VSCode ModuleNotFoundError: No module named X Error Make sure you are running from the package folder (not from package/module ) if you want import module. calculations to work. You can also set the PYTHONPATH environment variable to the path to the package folder.

Once you have created a virtual environment, and installed your required packages in that environment, close VS code. For Windows platform, open command prompt and navigate to the folder where your virtual env folder is created. And then launch VS code from there using the command code .
For ex: My virtual env name is .imgenv, and its inside C:\py_stuff\projects
So, I navigate to C:\py_stuff\projects and then type code .
Now, your VS code should recognize the packages !

I just ran into the same issue. I found that if I selected all text before shift enter the script would compile as a file instead of as a single line.

I had the same problem. I bet you have a shebang statement at the top of your file.
If you do.
Visual Studios settings
Under "Code-runner->Code-runner: Respect Shebang" section or just do a search for "Code-runner: Respect Shebang"
Uncheck weather to respect Shebang to run code.
Now it will run under the virtual environment and find the modules that you installed using pip! :)

I struggled with this for a very long time, and had tried almost every other answer. I wasn't using pip, so that wasn't the issue. But still VS Code wasn't finding the modules that were installed in the Selected Interpreter.
Ultimately it came down to old conflicts that existed because I switched to miniconda, and VS Code was still looking for anaconda3.
I completely wiped VS Code and its associated files (cache, preference files, etc.) from my machine (some instructions), and installed a clean version.
This now syncs as expected with miniconda.

If you have different python versions installed, be sure you install module with right one.
python -m pip install <module>
or
python3 -m pip install <module>

Run your environment from a directory not in the users directory. I solved my problem running my environment from C:\Code\ProjectA\
I discovered my problem by running:
IMPORT os
Mycwd = os.getcwd()
PRINT(Mycwd)

.venv/Lib/SitePackages is the default directory where Vscode looks for Modules.
This directory is automatically created on creating .venv via the command Pallete.
External modules installed via pip are placed in this directory by default.
Place self created modules inside this folder manually.

For mac users
In the terminal check which python you are using by command which python. It will give you the path of the python interpreter path. After that type cmd shift P and type Python: Select interpreter.
After that select + Enter interpreter path and paste the path which you got after running the command which python.

Python modules not importing

New to python and I cannot import modules that I have installed via pip.
For instance, I have installed numpy though cannot import it.
I have a feeling from trying to work this out that it is installing to the wrong directory, or I am calling the wrong version.
$ which python
returns
/usr/bin/python
I am just not sure how to change it so I can access the modules.

First if all, you are installing the packages using pip, which means you install it on python 2 by the default configurations.
The issue you are describing can be caused by several problems:
If you are working with an IDE like pycharm- your project interpeter might by python 3.x. You should change it to python 2 since you used pip and not pip3.
Some newer versions of pycharm are opening virtual environment by default in new projects. This means that if you install packages outside the virtual environment you will not be able to access them. When opening a project, intended of applying the default settings, change the interpreter to your system interpreter, probably your python2.7 in your case.
You are not using an IDE but accecing python from your terminal like so: python3 instead of python.
Hope it helps ;)

From a terminal try:
pip install numpy --user
This install numpy to your home directory. Sometimes this helps compared with installing it without the '--user' flag.
Then:
python
Now you have a python command line. Try:
import numpy
If you don't see any error message, then the install worked. Control-d or typing 'exit()' returns you to your shell.