I have made a simple chat system with python-requests. There are two different files one is the sender and another is the receiver. the main concept of these two files is
1. sender file contains a while loop which always takes the message as input. after
giving the message as input, it sends the message to a website.
2. receiver file also contains a while loop which gets requests from the website after every
5 seconds.
Now I want to run these two different works in the same window with Tkinter. how to do it? Thanks in advance.
Sender.py Code is here
import configme as con
import requests
import datetime
from cryptography.fernet import Fernet
nam = con.my_name
cookies_dict = con.cookie
key = con.crypto_key
url = con.base_url + '/config.php'
def makeID():
return datetime.datetime.now().timestamp()
# encription staff
fernet = Fernet(key)
# member joining message
if nam.__len__() != 0:
requests.get(url+f"?iD={makeID()}&name=<<<>>>&msg={nam} join the room.", cookies=cookies_dict)
with requests.Session() as r:
while True:
msg = input("Enter your Messege: ")
if msg == ".exit":
# r.get(url+f"?iD={makeID()}&name=<<<>>>&msg={nam} has left the room.", cookies=cookies_dict)
break
else:
encMessage = fernet.encrypt(msg.encode())
messenger = {'iD': makeID() ,'name': nam , 'msg': encMessage}
if msg != "":
r.get(url, params=messenger, cookies=cookies_dict)
Receiver.py code here...
import configme as con
import requests
import json
from cryptography.fernet import Fernet
from time import sleep
from datetime import datetime
from pytz import timezone
import pytz
cookies_dict = con.cookie
ozone = con.my_timezone
key = con.crypto_key
time_format = con.date_time_format
url = con.base_url + '/log.json'
t = con.receive_time
# encription staff
fernet = Fernet(key)
timezone = timezone(ozone)
def setTime(t):
stamptime = int(float(t))
GMT0 = pytz.utc.localize(datetime.utcfromtimestamp(stamptime))
return GMT0.astimezone(timezone).strftime(time_format)
j = 0
while True:
r = requests.get(url, cookies=cookies_dict).text
message = json.loads(r)
message_sz = len(message)
if message_sz == 0:
print("Looks like there are no message")
break
for msg in message[j:]:
local_time = setTime(msg['id'])
if msg['nam'] == '<<<>>>':
print(f"{local_time} :: {msg['nam']} :: {msg['msg']}")
else:
decMessage = fernet.decrypt(bytes(msg['msg'], "utf-8")).decode()
print(f"{local_time} :: {msg['nam']} :: {decMessage}")
j = message_sz
sleep(t)
I would not suggest using this checking and going to website method, but you could thread the while loops to go at the same time. And you could update tk when you want using tk.update().
You could get Data from vars that the threaded loops are setting and use them in your single tk window.
use multi threading .or else load data desperately
Related
I currently have a script pulling data from Instagram that looks like the code block posted below. As long as you enter your plug in your Instagram credentials under user_name and password, it should be fully reproducible.
It is taking the account listed in player_df, pulling a list of all their followers on Instagram, and taking that list of followers and pulling all of their bio information. But when I run it, I get the following error:
ClientConnectionError: timeout The read operation timed out
You can find the entire error log here, I just didn't want to post it in the original question because it would exceed the character limit.
As an attempt to fix this, I added in the sleep(300) functions to lessen the stress between API calls, but that doesn't seem to do the trick. What would be the best way to get around this so it doesn't timeout while trying to run?
from ftplib import error_proto
from hashlib import new
from multiprocessing.spawn import import_main_path
from time import sleep
from instagram_private_api import Client, ClientCompatPatch
from operator import itemgetter
import pandas as pd
import json
import requests
from collections import Counter
import datetime
import os.path
user_name = "XXXXX"
password = "XXXXX"
players = [['hannahkshepherd', '201683404']]
player_df = pd.DataFrame(players, columns=['username', 'userId'])
def pull_followers(username_instagram, userid_instagram):
followers = []
combinacao = []
results = api.user_followers(userid_instagram, rank_token=api.generate_uuid())
followers.extend(results.get('users', []))
next_max_id = results.get('next_max_id')
while next_max_id:
results = api.user_followers(userid_instagram, rank_token=api.generate_uuid(), max_id=next_max_id)
followers.extend(results.get('users', []))
next_max_id = results.get('next_max_id')
userid = [followers[i]['pk'] for i in range(0,len(followers))]
full_names = [followers[i]['full_name'] for i in range(0,len(followers))]
usernames = [followers[i]['username'] for i in range(0,len(followers))]
profile_pic_url = [followers[i]['profile_pic_url'] for i in range(0,len(followers))]
followers_text = ['follower' for i in range(0,len(followers))]
following_username = [str(username_instagram) for i in range(0,len(followers))]
following_userid = [str(userid_instagram) for i in range(0,len(followers))]
combinacao.extend([list(i) for i in zip(userid, full_names,
usernames, profile_pic_url, followers_text,
following_username, following_userid)])
combinacao = sorted(combinacao, key=itemgetter(2), reverse=False)
return combinacao
all_followers = []
for i in range(len(player_df)):
all_followers += pull_followers(player_df['username'][i], player_df["userId"][i])
def get_bios(followers):
bios = []
for follower in followers:
follower_id = follower[0]
bios += [[follower_id, api.user_info(follower_id)['user']['biography']]]
return bios
#sleep(300)
bios = get_bios(all_followers)
#sleep(300)
def print_bios():
s = ''
for row in bios:
s += '\n' + 'user_id: ' + str(row[0]) + ', bio: ' + str(row[1])
print(s)
I just got to know the world of programming and python was the first thing I learned.. This program already can extract data from .txt file and send it to API..
But the things is I don't know how to delete the file,after the data have been extracted and send to the API... Here is my coding...
from fileinput import close
import os
import requests
from datetime import datetime
import glob
import time
'''List'''
data_send_list = []
'''Path'''
path = "./file"
'''File List'''
file_name = []
URL = 'http://.......'
def main():
#Main
print("Main Def" "\n")
#ScanFile
data_send_list = scan_files(path)
#send_API
for json in data_send_list:
send_api(URL, json)
def read_text_file(file_path):
with open (file_path, 'r') as file:
data_dictionary={}
data = file.readlines()
...............
'''UPDATE THE DICTIONARY'''
data_dictionary.update([(...)(...)])
return data_dictionary
def scan_files(path):
list = []
os.chdir(path)
for file in glob.glob("*.txt"):
list.append(read_text_file(file))
return list
def send_api(url,json,):
requests_session = requests.session()
post_api = requests_session.post(url,data=json)
print("Sending API")
if(post_api.status_code >= 200 and post_api.status_code <300):
print("Successful. Status code: ",post_api.status_code)
print("\n")
#i hope that i can delete the file here
else:
print("Failed to send to API. Status code: ",post_api.status_code)
print("\n")
close()
return post_api.status_code
I was hoping that if the data can be sent to API... and give output "status code: 200" the data file will be deleted... while the data that is not sent, the file will remain
There would be a lot of better ways other than my answer.
import os
...
def send_api(url,json,path): # You need to add function parameter path to use at this function
requests_session = requests.session()
post_api = requests_session.post(url,data=json)
print("Sending API")
if(post_api.status_code >= 200 and post_api.status_code <300):
print("Successful. Status code: ",post_api.status_code)
print("\n")
os.remove(path) # use os.remove function to remove file
else:
print("Failed to send to API. Status code: ",post_api.status_code)
print("\n")
close()
return post_api.status_code
Below is my try to create a username availability checker with proxies, so far it works as intended
the only thing is that its slow, i tried to implement threads but no different as im not sure if im doing it right or not.
used concurrent.futures and threading libraries.
Is there a better way to code this kind of programs or are there any other suggestions?
Thanks in advance
import requests
import json
import ctypes
import colorama
from colorama import Fore
from datetime import datetime
import os
os.system("cls")
now = datetime.now()
current_time = now.strftime("%H:%M:%S")
colorama.init()
url = "https://link"
def grab_proxies():
proxylist = []
prx = open('proxy.txt','r')
prx = prx.readlines()
for proxy in prx:
proxy = proxy.rstrip("\n")
proxylist.append(proxy)
return proxylist
prlist = grab_proxies()
def grab_usernames():
userlist = []
users = open('userlist.txt','r')
users = users.readlines()
for user in users:
user = user.rstrip("\n")
userlist.append(user)
return userlist
ulist = grab_usernames()
found = 0
pc = 0
uc = 0
for i in range(0,len(prlist)):
ctypes.windll.kernel32.SetConsoleTitleW(f"[# Checker] | Counter: %s - Found: %s - Current Proxy: %s - Started at: %s" % (i, found, prlist[pc], current_time))
try:
req = requests.post(url,headers=headers, data = {"requested_username": ulist[uc], "xsrf_token": "F0kpyvjJgeBtsOk5Gl6Jvg"},proxies={'http' : prlist[pc],'https': prlist[pc]}, timeout=2)
response = req.json()
#print(response,req.status_code)
#print(response)
#print(type(response))
if(response['reference']['status_code'] == 'TAKEN'):
#rd = response['errors']['username'][0]['code']
print(f'{Fore.LIGHTBLACK_EX}[{Fore.LIGHTRED_EX}Taken{Fore.LIGHTBLACK_EX}]{Fore.LIGHTCYAN_EX} {ulist[uc]}')
#print(ulist[uc]+" Taken")
uc+=1
elif(response['reference']['status_code'] == 'OK'):
print(f'{Fore.LIGHTBLACK_EX}[{Fore.LIGHTGREEN_EX}Available{Fore.LIGHTBLACK_EX}]{Fore.LIGHTCYAN_EX} {ulist[uc]}')
#print(ulist[uc]+" Available")
f = open("found.txt","a")
f.write(ulist[uc]+"\n")
f.close()
found+=1
uc+=1
elif(response['reference']['status_code'] == 'INVALID_BEGIN'):
print(f'{Fore.LIGHTBLACK_EX}[{Fore.LIGHTRED_EX}Invalid Username{Fore.LIGHTBLACK_EX}]{Fore.LIGHTCYAN_EX} {ulist[uc]}')
uc+=1
elif(response['reference']['status_code'] == 'DELETED'):
print(f'{Fore.LIGHTBLACK_EX}[{Fore.LIGHTRED_EX}Deleted{Fore.LIGHTBLACK_EX}]{Fore.LIGHTCYAN_EX} {ulist[uc]}')
uc+=1
else:
print(response)
except:
#print(prlist[pc]+ " Going to next proxy")
pc+=1
pass
#break
x = input("Finished!.. press enter to exit")
You could use https://github.com/encode/requests-async to do your requests in an async way
I would like some help. I'm trying to send a variable to T0. I've tried but I cannot send a variable value. Please help.
CODE
import serial
import time
import struct
from requests import get
ip = get('https://api.ipify.org').text
ser = serial.Serial("/dev/ttyAMA0")
time.sleep(1)
k=struct.pack('B', 0xff )
while True:
ser.write(b't0.txt=ip')
ser.write(k)
ser.write(k)
ser.write(k)
You have to wrap your string in quotation marks (") for Nextion to read the string.
Not a Python expert, but this should give you a clue:
Change ser.write(b't0.txt=ip') to something like ser.write(b't0.txt="' + ip + '"').
This works for me.
port=serial.Serial(port='/dev/ttyAMA0',baudrate=9600, timeout=1.0)
eof = "\xff\xff\xff"
tn = str(datetime.now().time())
alt = 'page0.T0.txt="'+tn+'"'+eof
dimCmd = "dim=0"
undimCmd = "dim=100"
cmd1 = "https://api.thingspeak.com/apps/thinghttp/send_request?api_key=YOUR_API_KEY" #IF USING THINGSPEAK
#get temp Sub - USING THINGSPEAK GET LOCAL WEATHER
def GetTemp():
global temp
response = urllib.urlopen(cmd1)
temp = response.read()
temp = temp[:-2] #gets all characters in temp except the last 2
while True:
port.write(alt) #writes time to T0 textbox on screen
port.write(undimCmd + eof) #set screen brightness to 100%
port.write("page 1")#set screen to page 1 for multiple page setups
import time
from TwitterAPI import TwitterAPI
import requests
from requests_oauthlib import OAuth1
from urlparse import parse_qs
# application's key and key secret
ck = ''
cs = ''
# obtain request token
oauth = OAuth1(ck, cs)
r = requests.post(url='https://api.twitter.com/oauth/request_token', auth=oauth)
credentials = parse_qs(r.content)
request_key = credentials.get('oauth_token')[0]
request_secret = credentials.get('oauth_token_secret')[0]
#obtain authorization from twitter user
print('Visit this link to authorize the TweetBot:\n https://api.twitter.com/oauth/authorize?oauth_token=%s' % request_key)
verifier = raw_input('Enter your verification code: ')
# obtain access token
oauth = OAuth1(ck, cs, request_key, request_secret, verifier=verifier)
r = requests.get(url='https://api.twitter.com/oauth/access_token', auth=oauth)
credentials = parse_qs(r.content)
tk = credentials.get('oauth_token')[0]
ts = credentials.get('oauth_token_secret')[0]
# access TwitterAPI with the obtained access
api = TwitterAPI(ck, cs, tk, ts)
f = open('tweetbot.txt', 'rU')
for line in f:
r = api.request('statuses/update', {'status' : line})
print line,
print r.status_code
time.sleep(600)
I have this code but I want it to add multiple twitter accounts. I guess I'd need to loop the input and store them in different variables? Please give me the best solution. I'm not that advanced with python.
Alright #user3392493, what you need is a while loop, but with several if statements inside and a counter variable, so the variables are set based on what number the counter is at:
enoughaccounts = False
counter = 0
while not enoughaccounts:
counter += 1
if counter == 1:
# Do Everything
account1 = .....
if counter == 2:
# Do Everything
account2 = .....
if counter == 3:
# Do Everything
account3 = .....
if counter == 4:
# Do Everything
account4 = .....
moreaccounts = input('Add another account? (type yes or no)')
if moreaccounts == 'no' or moreaccounts == 'No' or moreaccounts == 'NO':
enoughaccounts = True
This should do what you want it to, if you need anything else just ask :)