This question already has answers here:
What's the pythonic way to use getters and setters?
(8 answers)
Closed 4 months ago.
What advantages does the #property notation hold over the classic getter+setter? In which specific cases/situations should a programmer choose to use one over the other?
With properties:
class MyClass(object):
#property
def my_attr(self):
return self._my_attr
#my_attr.setter
def my_attr(self, value):
self._my_attr = value
Without properties:
class MyClass(object):
def get_my_attr(self):
return self._my_attr
def set_my_attr(self, value):
self._my_attr = value
Prefer properties. It's what they're there for.
The reason is that all attributes are public in Python. Starting names with an underscore or two is just a warning that the given attribute is an implementation detail that may not stay the same in future versions of the code. It doesn't prevent you from actually getting or setting that attribute. Therefore, standard attribute access is the normal, Pythonic way of, well, accessing attributes.
The advantage of properties is that they are syntactically identical to attribute access, so you can change from one to another without any changes to client code. You could even have one version of a class that uses properties (say, for code-by-contract or debugging) and one that doesn't for production, without changing the code that uses it. At the same time, you don't have to write getters and setters for everything just in case you might need to better control access later.
In Python you don't use getters or setters or properties just for the fun of it. You first just use attributes and then later, only if needed, eventually migrate to a property without having to change the code using your classes.
There is indeed a lot of code with extension .py that uses getters and setters and inheritance and pointless classes everywhere where e.g. a simple tuple would do, but it's code from people writing in C++ or Java using Python.
That's not Python code.
Using properties lets you begin with normal attribute accesses and then back them up with getters and setters afterwards as necessary.
The short answer is: properties wins hands down. Always.
There is sometimes a need for getters and setters, but even then, I would "hide" them to the outside world. There are plenty of ways to do this in Python (getattr, setattr, __getattribute__, etc..., but a very concise and clean one is:
def set_email(self, value):
if '#' not in value:
raise Exception("This doesn't look like an email address.")
self._email = value
def get_email(self):
return self._email
email = property(get_email, set_email)
Here's a brief article that introduces the topic of getters and setters in Python.
[TL;DR? You can skip to the end for a code example.]
I actually prefer to use a different idiom, which is a little involved for using as a one off, but is nice if you have a more complex use case.
A bit of background first.
Properties are useful in that they allow us to handle both setting and getting values in a programmatic way but still allow attributes to be accessed as attributes. We can turn 'gets' into 'computations' (essentially) and we can turn 'sets' into 'events'. So let's say we have the following class, which I've coded with Java-like getters and setters.
class Example(object):
def __init__(self, x=None, y=None):
self.x = x
self.y = y
def getX(self):
return self.x or self.defaultX()
def getY(self):
return self.y or self.defaultY()
def setX(self, x):
self.x = x
def setY(self, y):
self.y = y
def defaultX(self):
return someDefaultComputationForX()
def defaultY(self):
return someDefaultComputationForY()
You may be wondering why I didn't call defaultX and defaultY in the object's __init__ method. The reason is that for our case I want to assume that the someDefaultComputation methods return values that vary over time, say a timestamp, and whenever x (or y) is not set (where, for the purpose of this example, "not set" means "set to None") I want the value of x's (or y's) default computation.
So this is lame for a number of reasons describe above. I'll rewrite it using properties:
class Example(object):
def __init__(self, x=None, y=None):
self._x = x
self._y = y
#property
def x(self):
return self.x or self.defaultX()
#x.setter
def x(self, value):
self._x = value
#property
def y(self):
return self.y or self.defaultY()
#y.setter
def y(self, value):
self._y = value
# default{XY} as before.
What have we gained? We've gained the ability to refer to these attributes as attributes even though, behind the scenes, we end up running methods.
Of course the real power of properties is that we generally want these methods to do something in addition to just getting and setting values (otherwise there is no point in using properties). I did this in my getter example. We are basically running a function body to pick up a default whenever the value isn't set. This is a very common pattern.
But what are we losing, and what can't we do?
The main annoyance, in my view, is that if you define a getter (as we do here) you also have to define a setter.[1] That's extra noise that clutters the code.
Another annoyance is that we still have to initialize the x and y values in __init__. (Well, of course we could add them using setattr() but that is more extra code.)
Third, unlike in the Java-like example, getters cannot accept other parameters. Now I can hear you saying already, well, if it's taking parameters it's not a getter! In an official sense, that is true. But in a practical sense there is no reason we shouldn't be able to parameterize an named attribute -- like x -- and set its value for some specific parameters.
It'd be nice if we could do something like:
e.x[a,b,c] = 10
e.x[d,e,f] = 20
for example. The closest we can get is to override the assignment to imply some special semantics:
e.x = [a,b,c,10]
e.x = [d,e,f,30]
and of course ensure that our setter knows how to extract the first three values as a key to a dictionary and set its value to a number or something.
But even if we did that we still couldn't support it with properties because there is no way to get the value because we can't pass parameters at all to the getter. So we've had to return everything, introducing an asymmetry.
The Java-style getter/setter does let us handle this, but we're back to needing getter/setters.
In my mind what we really want is something that capture the following requirements:
Users define just one method for a given attribute and can indicate there
whether the attribute is read-only or read-write. Properties fail this test
if the attribute writable.
There is no need for the user to define an extra variable underlying the function, so we don't need the __init__ or setattr in the code. The variable just exists by the fact we've created this new-style attribute.
Any default code for the attribute executes in the method body itself.
We can set the attribute as an attribute and reference it as an attribute.
We can parameterize the attribute.
In terms of code, we want a way to write:
def x(self, *args):
return defaultX()
and be able to then do:
print e.x -> The default at time T0
e.x = 1
print e.x -> 1
e.x = None
print e.x -> The default at time T1
and so forth.
We also want a way to do this for the special case of a parameterizable attribute, but still allow the default assign case to work. You'll see how I tackled this below.
Now to the point (yay! the point!). The solution I came up for for this is as follows.
We create a new object to replace the notion of a property. The object is intended to store the value of a variable set to it, but also maintains a handle on code that knows how to calculate a default. Its job is to store the set value or to run the method if that value is not set.
Let's call it an UberProperty.
class UberProperty(object):
def __init__(self, method):
self.method = method
self.value = None
self.isSet = False
def setValue(self, value):
self.value = value
self.isSet = True
def clearValue(self):
self.value = None
self.isSet = False
I assume method here is a class method, value is the value of the UberProperty, and I have added isSet because None may be a real value and this allows us a clean way to declare there really is "no value". Another way is a sentinel of some sort.
This basically gives us an object that can do what we want, but how do we actually put it on our class? Well, properties use decorators; why can't we? Let's see how it might look (from here on I'm going to stick to using just a single 'attribute', x).
class Example(object):
#uberProperty
def x(self):
return defaultX()
This doesn't actually work yet, of course. We have to implement uberProperty and
make sure it handles both gets and sets.
Let's start with gets.
My first attempt was to simply create a new UberProperty object and return it:
def uberProperty(f):
return UberProperty(f)
I quickly discovered, of course, that this doens't work: Python never binds the callable to the object and I need the object in order to call the function. Even creating the decorator in the class doesn't work, as although now we have the class, we still don't have an object to work with.
So we're going to need to be able to do more here. We do know that a method need only be represented the one time, so let's go ahead and keep our decorator, but modify UberProperty to only store the method reference:
class UberProperty(object):
def __init__(self, method):
self.method = method
It is also not callable, so at the moment nothing is working.
How do we complete the picture? Well, what do we end up with when we create the example class using our new decorator:
class Example(object):
#uberProperty
def x(self):
return defaultX()
print Example.x <__main__.UberProperty object at 0x10e1fb8d0>
print Example().x <__main__.UberProperty object at 0x10e1fb8d0>
in both cases we get back the UberProperty which of course is not a callable, so this isn't of much use.
What we need is some way to dynamically bind the UberProperty instance created by the decorator after the class has been created to an object of the class before that object has been returned to that user for use. Um, yeah, that's an __init__ call, dude.
Let's write up what we want our find result to be first. We're binding an UberProperty to an instance, so an obvious thing to return would be a BoundUberProperty. This is where we'll actually maintain state for the x attribute.
class BoundUberProperty(object):
def __init__(self, obj, uberProperty):
self.obj = obj
self.uberProperty = uberProperty
self.isSet = False
def setValue(self, value):
self.value = value
self.isSet = True
def getValue(self):
return self.value if self.isSet else self.uberProperty.method(self.obj)
def clearValue(self):
del self.value
self.isSet = False
Now we the representation; how do get these on to an object? There are a few approaches, but the easiest one to explain just uses the __init__ method to do that mapping. By the time __init__ is called our decorators have run, so just need to look through the object's __dict__ and update any attributes where the value of the attribute is of type UberProperty.
Now, uber-properties are cool and we'll probably want to use them a lot, so it makes sense to just create a base class that does this for all subclasses. I think you know what the base class is going to be called.
class UberObject(object):
def __init__(self):
for k in dir(self):
v = getattr(self, k)
if isinstance(v, UberProperty):
v = BoundUberProperty(self, v)
setattr(self, k, v)
We add this, change our example to inherit from UberObject, and ...
e = Example()
print e.x -> <__main__.BoundUberProperty object at 0x104604c90>
After modifying x to be:
#uberProperty
def x(self):
return *datetime.datetime.now()*
We can run a simple test:
print e.x.getValue()
print e.x.getValue()
e.x.setValue(datetime.date(2013, 5, 31))
print e.x.getValue()
e.x.clearValue()
print e.x.getValue()
And we get the output we wanted:
2013-05-31 00:05:13.985813
2013-05-31 00:05:13.986290
2013-05-31
2013-05-31 00:05:13.986310
(Gee, I'm working late.)
Note that I have used getValue, setValue, and clearValue here. This is because I haven't yet linked in the means to have these automatically returned.
But I think this is a good place to stop for now, because I'm getting tired. You can also see that the core functionality we wanted is in place; the rest is window dressing. Important usability window dressing, but that can wait until I have a change to update the post.
I'll finish up the example in the next posting by addressing these things:
We need to make sure UberObject's __init__ is always called by subclasses.
So we either force it be called somewhere or we prevent it from being implemented.
We'll see how to do this with a metaclass.
We need to make sure we handle the common case where someone 'aliases'
a function to something else, such as:
class Example(object):
#uberProperty
def x(self):
...
y = x
We need e.x to return e.x.getValue() by default.
What we'll actually see is this is one area where the model fails.
It turns out we'll always need to use a function call to get the value.
But we can make it look like a regular function call and avoid having to use e.x.getValue(). (Doing this one is obvious, if you haven't already fixed it out.)
We need to support setting e.x directly, as in e.x = <newvalue>. We can do this in the parent class too, but we'll need to update our __init__ code to handle it.
Finally, we'll add parameterized attributes. It should be pretty obvious how we'll do this, too.
Here's the code as it exists up to now:
import datetime
class UberObject(object):
def uberSetter(self, value):
print 'setting'
def uberGetter(self):
return self
def __init__(self):
for k in dir(self):
v = getattr(self, k)
if isinstance(v, UberProperty):
v = BoundUberProperty(self, v)
setattr(self, k, v)
class UberProperty(object):
def __init__(self, method):
self.method = method
class BoundUberProperty(object):
def __init__(self, obj, uberProperty):
self.obj = obj
self.uberProperty = uberProperty
self.isSet = False
def setValue(self, value):
self.value = value
self.isSet = True
def getValue(self):
return self.value if self.isSet else self.uberProperty.method(self.obj)
def clearValue(self):
del self.value
self.isSet = False
def uberProperty(f):
return UberProperty(f)
class Example(UberObject):
#uberProperty
def x(self):
return datetime.datetime.now()
[1] I may be behind on whether this is still the case.
I think both have their place. One issue with using #property is that it is hard to extend the behaviour of getters or setters in subclasses using standard class mechanisms. The problem is that the actual getter/setter functions are hidden in the property.
You can actually get hold of the functions, e.g. with
class C(object):
_p = 1
#property
def p(self):
return self._p
#p.setter
def p(self, val):
self._p = val
you can access the getter and setter functions as C.p.fget and C.p.fset, but you can't easily use the normal method inheritance (e.g. super) facilities to extend them. After some digging into the intricacies of super, you can indeed use super in this way:
# Using super():
class D(C):
# Cannot use super(D,D) here to define the property
# since D is not yet defined in this scope.
#property
def p(self):
return super(D,D).p.fget(self)
#p.setter
def p(self, val):
print 'Implement extra functionality here for D'
super(D,D).p.fset(self, val)
# Using a direct reference to C
class E(C):
p = C.p
#p.setter
def p(self, val):
print 'Implement extra functionality here for E'
C.p.fset(self, val)
Using super() is, however, quite clunky, since the property has to be redefined, and you have to use the slightly counter-intuitive super(cls,cls) mechanism to get an unbound copy of p.
Using properties is to me more intuitive and fits better into most code.
Comparing
o.x = 5
ox = o.x
vs.
o.setX(5)
ox = o.getX()
is to me quite obvious which is easier to read. Also properties allows for private variables much easier.
I feel like properties are about letting you get the overhead of writing getters and setters only when you actually need them.
Java Programming culture strongly advise to never give access to properties, and instead, go through getters and setters, and only those which are actually needed.
It's a bit verbose to always write these obvious pieces of code, and notice that 70% of the time they are never replaced by some non-trivial logic.
In Python, people actually care for that kind of overhead, so that you can embrace the following practice :
Do not use getters and setters at first, when if they not needed
Use #property to implement them without changing the syntax of the rest of your code.
I would prefer to use neither in most cases. The problem with properties is that they make the class less transparent. Especially, this is an issue if you were to raise an exception from a setter. For example, if you have an Account.email property:
class Account(object):
#property
def email(self):
return self._email
#email.setter
def email(self, value):
if '#' not in value:
raise ValueError('Invalid email address.')
self._email = value
then the user of the class does not expect that assigning a value to the property could cause an exception:
a = Account()
a.email = 'badaddress'
--> ValueError: Invalid email address.
As a result, the exception may go unhandled, and either propagate too high in the call chain to be handled properly, or result in a very unhelpful traceback being presented to the program user (which is sadly too common in the world of python and java).
I would also avoid using getters and setters:
because defining them for all properties in advance is very time consuming,
makes the amount of code unnecessarily longer, which makes understanding and maintaining the code more difficult,
if you were define them for properties only as needed, the interface of the class would change, hurting all users of the class
Instead of properties and getters/setters I prefer doing the complex logic in well defined places such as in a validation method:
class Account(object):
...
def validate(self):
if '#' not in self.email:
raise ValueError('Invalid email address.')
or a similiar Account.save method.
Note that I am not trying to say that there are no cases when properties are useful, only that you may be better off if you can make your classes simple and transparent enough that you don't need them.
I am surprised that nobody has mentioned that properties are bound methods of a descriptor class, Adam Donohue and NeilenMarais get at exactly this idea in their posts -- that getters and setters are functions and can be used to:
validate
alter data
duck type (coerce type to another type)
This presents a smart way to hide implementation details and code cruft like regular expression, type casts, try .. except blocks, assertions or computed values.
In general doing CRUD on an object may often be fairly mundane but consider the example of data that will be persisted to a relational database. ORM's can hide implementation details of particular SQL vernaculars in the methods bound to fget, fset, fdel defined in a property class that will manage the awful if .. elif .. else ladders that are so ugly in OO code -- exposing the simple and elegant self.variable = something and obviate the details for the developer using the ORM.
If one thinks of properties only as some dreary vestige of a Bondage and Discipline language (i.e. Java) they are missing the point of descriptors.
In complex projects I prefer using read-only properties (or getters) with explicit setter function:
class MyClass(object):
...
#property
def my_attr(self):
...
def set_my_attr(self, value):
...
In long living projects debugging and refactoring takes more time than writing the code itself. There are several downsides for using #property.setter that makes debugging even harder:
1) python allows creating new attributes for an existing object. This makes a following misprint very hard to track:
my_object.my_atttr = 4.
If your object is a complicated algorithm then you will spend quite some time trying to find out why it doesn't converge (notice an extra 't' in the line above)
2) setter sometimes might evolve to a complicated and slow method (e.g. hitting a database). It would be quite hard for another developer to figure out why the following function is very slow. He might spend a lot of time on profiling do_something() method, while my_object.my_attr = 4. is actually the cause of slowdown:
def slow_function(my_object):
my_object.my_attr = 4.
my_object.do_something()
Both #property and traditional getters and setters have their advantages. It depends on your use case.
Advantages of #property
You don't have to change the interface while changing the implementation of data access. When your project is small, you probably want to use direct attribute access to access a class member. For example, let's say you have an object foo of type Foo, which has a member num. Then you can simply get this member with num = foo.num. As your project grows, you may feel like there needs to be some checks or debugs on the simple attribute access. Then you can do that with a #property within the class. The data access interface remains the same so that there is no need to modify client code.
Cited from PEP-8:
For simple public data attributes, it is best to expose just the attribute name, without complicated accessor/mutator methods. Keep in mind that Python provides an easy path to future enhancement, should you find that a simple data attribute needs to grow functional behavior. In that case, use properties to hide functional implementation behind simple data attribute access syntax.
Using #property for data access in Python is regarded as Pythonic:
It can strengthen your self-identification as a Python (not Java) programmer.
It can help your job interview if your interviewer thinks Java-style getters and setters are anti-patterns.
Advantages of traditional getters and setters
Traditional getters and setters allow for more complicated data access than simple attribute access. For example, when you are setting a class member, sometimes you need a flag indicating where you would like to force this operation even if something doesn't look perfect. While it is not obvious how to augment a direct member access like foo.num = num, You can easily augment your traditional setter with an additional force parameter:
def Foo:
def set_num(self, num, force=False):
...
Traditional getters and setters make it explicit that a class member access is through a method. This means:
What you get as the result may not be the same as what is exactly stored within that class.
Even if the access looks like a simple attribute access, the performance can vary greatly from that.
Unless your class users expect a #property hiding behind every attribute access statement, making such things explicit can help minimize your class users surprises.
As mentioned by #NeilenMarais and in this post, extending traditional getters and setters in subclasses is easier than extending properties.
Traditional getters and setters have been widely used for a long time in different languages. If you have people from different backgrounds in your team, they look more familiar than #property. Also, as your project grows, if you may need to migrate from Python to another language that doesn't have #property, using traditional getters and setters would make the migration smoother.
Caveats
Neither #property nor traditional getters and setters makes the class member private, even if you use double underscore before its name:
class Foo:
def __init__(self):
self.__num = 0
#property
def num(self):
return self.__num
#num.setter
def num(self, num):
self.__num = num
def get_num(self):
return self.__num
def set_num(self, num):
self.__num = num
foo = Foo()
print(foo.num) # output: 0
print(foo.get_num()) # output: 0
print(foo._Foo__num) # output: 0
Here is an excerpts from "Effective Python: 90 Specific Ways to Write Better Python" (Amazing book. I highly recommend it).
Things to Remember
✦ Define new class interfaces using simple public attributes and avoid
defining setter and getter methods.
✦ Use #property to define special behavior when attributes are
accessed on your objects, if necessary.
✦ Follow the rule of least surprise and avoid odd side effects in your
#property methods.
✦ Ensure that #property methods are fast; for slow or complex
work—especially involving I/O or causing side effects—use normal
methods instead.
One advanced but common use of #property is transitioning what was
once a simple numerical attribute into an on-the-fly calculation. This
is extremely helpful because it lets you migrate all existing usage of
a class to have new behaviors without requiring any of the call sites
to be rewritten (which is especially important if there’s calling code
that you don’t control). #property also provides an important stopgap
for improving interfaces over time.
I especially like #property because it lets you make incremental
progress toward a better data model over time.
#property is a tool to
help you address problems you’ll come across in real-world code. Don’t
overuse it. When you find yourself repeatedly extending #property
methods, it’s probably time to refactor your class instead of further
paving over your code’s poor design.
✦ Use #property to give existing instance attributes
new functionality.
✦ Make incremental progress toward better data
models by using #property.
✦ Consider refactoring a class and all call
sites when you find yourself using #property too heavily.
Sometimes self can denote the instance of the class and sometimes the class itself. So why don't we use inst and klass instead of self? Wouldn't that make things easier?
How things are now
class A:
#classmethod
def do(self): # self refers to class
..
class B:
def do(self): # self refers to instance of class
..
How I think they should be
class A:
#classmethod
def do(klass): # no ambiguity
..
class B:
def do(inst): # no ambiguity
..
So how come we don't program like this when in the zen of Python it is stated that explicit is better than implicit? Is there something that I am missing?
Class method support was added much later to Python, and the convention to use self for instances had already been established. Keeping that convention stable has more value than to switch to a longer name like instance.
The convention for class methods is to use the name cls:
class A:
#classmethod
def do(cls):
In other words, the conventions are already there to distinguish between a class object and the instance; never use self for class methods.
Also see PEP 8 - Function and method arguments:
Always use self for the first argument to instance methods.
Always use cls for the first argument to class methods.
I think it would be better to use "cls":
class A:
#classmethod
def do(cls): # cls refers to class
..
class B:
def do(self): # self refers to instance of class
..
It's requirement of PEP8:
http://legacy.python.org/dev/peps/pep-0008/#function-and-method-arguments
I think the point is that conventially you don't use self for methods wrapped with #classmethod. (You could write kls, cls, etc.)
There is ultimately nothing stopping you from writing inst instead of self if you so desire. So your second example would work fine and is actually the expected way to handle it (in terms of distinguishing an instance vs a class). However, you should definitely use self when dealing with instances. It's a Python convention and breaking it is strongly discouraged.
PEP8
Seeing as others have mentioned it, it's true PEP8 does say to use both self and cls in the case of instance and class methods, respectively. The only thing I'd add to this is that while there isn't any sensible reason to break this rule, changing self is significantly worse (from a semantic POV) because of its strong use inside of 99.999% of Python code. Its use is so universal that many (if not most) beginners assume it's a keyword and are confused by the idea that one can change self to anything.
This strong relationship to code and convention is not so apparent with class methods IMO. Of course I would urge anyone to follow PEP8 as much as possible, but if you felt inclined to use kls instead of cls, I feel that you'd be committing a lesser evil than if you changed self. However, whichever name you go with should remain consistent throughout your program.
Concretely, I have a user-defined class of type
class Foo(object):
def __init__(self, bar):
self.bar = bar
def bind(self):
val = self.bar
do_something(val)
I need to:
1) be able to call on the class (not an instance of the class) to recover all the self.xxx attributes defined within the class.
For an instance of a class, this can be done by doing a f = Foo('') and then f.__dict__. Is there a way of doing it for a class, and not an instance? If yes, how? I would expect Foo.__dict__ to return {'bar': None} but it doesn't work this way.
2) be able to access all the self.xxx parameters called from a particular function of a class. For instance I would like to do Foo.bind.__selfparams__ and recieve in return ['bar']. Is there a way of doing this?
This is something that is quite hard to do in a dynamic language, assuming I understand correctly what you're trying to do. Essentially this means going over all the instances in existence for the class and then collecting all the set attributes on those instances. While not infeasible, I would question the practicality of such approach both from a design as well as performance points of view.
More specifically, you're talking of "all the self.xxx attributes defined within the class"—but these things are not defined at all, not at least in a single place—they more like "evolve" as more and more instances of the class are brought to life. Now, I'm not saying all your instances are setting different attributes, but they might, and in order to have a reliable generic solution, you'd literally have to keep track of anything the instances might have done to themselves. So unless you have a static analysis approach in mind, I don't see a clean and efficient way of achieving it (and actually even static analysis is of no help generally speaking in a dynamic language).
A trivial example to prove my point:
class Foo(object):
def __init__(self):
# statically analysable
self.bla = 3
# still, but more difficult
if SOME_CONSTANT > 123:
self.x = 123
else:
self.y = 321
def do_something(self):
import random
setattr(self, "attr%s" % random.randint(1, 100), "hello, world of dynamic languages!")
foo = Foo()
foo2 = Foo()
# only `bla`, `x`, and `y` attrs in existence so far
foo2.do_something()
# now there's an attribute with a random name out there
# in order to detect it, we'd have to get all instances of Foo existence at the moment, and individually inspect every attribute on them.
And, even if you were to iterate all instances in existence, you'd only be getting a snapshot of what you're interested, not all possible attributes.
This is not possible. The class doesn't have those attributes, just functions that set them. Ergo, there is nothing to retrieve and this is impossible.
This is only possible with deep AST inspection. Foo.bar.func_code would normally have the attributes you want under co_freevars but you're looking up the attributes on self, so they are not free variables. You would have to decompile the bytecode from func_code.co_code to AST and then walk said AST.
This is a bad idea. Whatever you're doing, find a different way of doing it.
To do this, you need some way to find all the instances of your class. One way to do this is just to have the class itself keep track of its instances. Unfortunately, keeping a reference to every instance in the class means that those instances can never be garbage-collected. Fortunately, Python has weakref, which will keep a reference to an object but does not count as a reference to Python's memory management, so the instances can be garbage-collected as per usual.
A good place to update the list of instances is in your __init__() method. You could also do it in __new__() if you find the separation of concerns a little cleaner.
import weakref
class Foo(object):
_instances = []
def __init__(self, value):
self.value = value
cls = type(self)
type(self)._instances.append(weakref.ref(self,
type(self)._instances.remove))
#classmethod
def iterinstances(cls):
"Returns an iterator over all instances of the class."
return (ref() for ref in cls._instances)
#classmethod
def iterattrs(cls, attr, default=None):
"Returns an iterator over a named attribute of all instances of the class."
return (getattr(ref(), attr, default) for ref in cls._instances)
Now you can do this:
f1, f2, f3 = Foo(1), Foo(2), Foo(3)
for v in Foo.iterattrs("value"):
print v, # prints 1 2 3
I am, for the record, with those who think this is generally a bad idea and/or not really what you want. In particular, instances may live longer than you expect depending on where you pass them and what that code does with them, so you may not always have the instances you think you have. (Some of this may even happen implicitly.) It is generally better to be explicit about this: rather than having the various instances of your class be stored in random variables all over your code (and libraries), have their primary repository be a list or other container, and access them from there. Then you can easily iterate over them and get whatever attributes you want. However, there may be use cases for something like this and it's possible to code it up, so I did.