We Keep Coding

How can I 'translate' all unicode codes in a string to the actual symbols using Python 3?

I'm parsing web content to isolate the body of news articles from a certain site, for which I'm using urllib.request to retrieve the source code for the article webpage and isolate the main text. However, urllib takes characters like "ç" and puts it into a python string as its utf-8 notation, "c387". It does the same for the '”' and "„" characters, which print as an 'e' followed by a set of numbers. This is very irritating when trying to read the article and thus needs to be resolved. I could loop through the article and change every recognizable utf-8 code to the actual character using a tedious function, but I was wondering if there was a way to do that more easily.
For an example, the current output of my program might be:
e2809eThis country doesn't...e2809d
I would like it to be:
„This country doesn't...”
Note: I've already checked the source code of the web page, which just uses these 'special' characters, so it's definitely a urllib issue.
Thanks in advance!

urllib returns bytes:
>import urllib
>url = 'https://stackoverflow.com/questions/62085906'
>data = urllib.request.urlopen(url).read()
>type(data)
bytes
>idx = data.index(b'characters like')
>data[idx:idx+20]
b'characters like "\xc3\xa7"'
Now, let's try to interpret this as utf-8:
>data[idx:idx+20].decode('utf-8')
'characters like "ç"'
Et voilà!

python request library giving wrong value single quotes

Facing some issue in calling API using request library. Problem is described as follows
The code:.
r = requests.post(url, data=json.dumps(json_data), headers=headers)
When I perform r.text the apostrophe in the string is giving me as
like this Bachelor\u2019s Degree. This should actually give me the response as Bachelor's Degree.
I tried json.loads also but the single quote problem remains the same,
How to get the string value correctly.

What you see here ("Bachelor\u2019s Degree") is the string's inner representation, where "\u2019" is the unicode codepoint for "RIGHT SINGLE QUOTATION MARK". This is perfectly correct, there's nothing wrong here, if you print() this string you'll get what you expect:
>>> s = 'Bachelor\u2019s Degree'
>>> print(s)
Bachelor’s Degree
Learning about unicode and encodings might save you quite some time FWIW.
EDIT:
When I save in db and then on displaying on HTML it will cause issue
right?
Have you tried ?
Your database connector is supposed to encode it to the proper encoding (according to your fields, tables and client encoding settings).
wrt/ "displaying it on HTML", it mostly depends on whether you're using Python 2.7.x or Python 3.x AND on how you build your HTML, but if you're using some decent framework with a decent template engine (if not you should reconsider your stack) chances are it will work out of the box.
As I already mentionned, learning about unicode and encodings will save you a lot of time.

It's just using a UTF-8 encoding, it is not "wrong".
string = 'Bachelor\u2019s Degree'
print(string)
Bachelor’s Degree
You can decode and encode it again, but I can't see any reason why you would want to do that (this might not work in Python 2):
string = 'Bachelor\u2019s Degree'.encode().decode('utf-8')
print(string)
Bachelor’s Degree

From requests docs:
When you make a request, Requests makes educated guesses about the
encoding of the response based on the HTTP headers. The text encoding
guessed by Requests is used when you access r.text
On the response object, you may use .content instead of .text to get the response in UTF-8

Fetching URL and converting to UTF-8 Python

I would like to do my first project in python but I have problem with coding. When I fetch data it shows coded letters instead of my native letters, for example '\xc4\x87' instead of 'ć'. The code is below:
import urllib.request
import sys
page = urllib.request.urlopen("http://olx.pl/")
test = page.read()
print(test)
print(sys.stdin.encoding)
z = "ł"
print(z)
print(z.encode("utf-8"))
I know that code here is poor but I tried many options to change encoding. I wrote z = "ł" to check if it can print any 'special' letter and it shows. I tried to encode it and it works also as it should. Sys.stdin.encoding shows cp852.

The data you read from a urlopen() response is encoded data. You'd need to first decode that data using the right encoding.
You appear to have downloaded UTF-8 data; you'd have to decode that data first before you had text:
test = page.read().decode('utf8')
However, it is up to the server to tell you what data was received. Check for a characterset in the headers:
encoding = page.info().getparam('charset')
This can still be None; many data formats include the encoding as part of the format. XML for example is UTF-8 by default but the XML declaration at the start can contain information about what codec was used for that document. An XML parser would extract that information to ensure you get properly decoded Unicode text when parsing.
You may not be able to print that data; the 852 codepage can only handle 256 different codepoints, while the Unicode standard is far larger.

The urlopen is returning to you a bytes object. That means it's a raw, encoded stream of bytes. Python 3 prints that in a repr format, which uses escape codes for non-ASCII characters. To get the canonical unicode you would have to decode it. The right way to do that would be to inspect the header and look for the encoding declaration. But for this we can assume UTF-8 and you can simply decode it as such, not encode it.
import urllib.request
import sys
page = urllib.request.urlopen("http://olx.pl/")
test = page.read()
print(test.decode("utf-8")) # <- note change
Now, Python 3 defaults to UTF-8 source encoding. So you can embed non-ASCII like this if your editor supports unicode and saving as UTF-8.
z = "ł"
print(z)
Printing it will only work if your terminal supports UTF-8 encoding. On Linux and OSX they do, so this is not a problem there.

The others are correct, but I'd like to offer a simpler solution. Use requests. It's 3rd party, so you'll need to install it via pip:
pip install requests
But it's a lot simpler to use than the urllib libraries. For your particular case, it handles the decoding for you out of the box:
import requests
r = requests.get("http://olx.pl/")
print(r.encoding)
# UTF-8
print(type(r.text))
# <class 'str'>
print(r.text)
# The HTML
Breakdown:
get sends an HTTP GET request to the server and returns the respose.
We print the encoding requests thinks the text is in. It chooses this based on the response header Martijin mentions.
We show that r.text is already a decoded text type (unicode in Python 2 and str in Python 3)
Then we actually print the response.
Note that we don't have to print the encoding or type; I've just done so for diagnostic purposes to show what requests is doing. requests is designed to simplify a lot of other details of working with HTTP requests, and it does a good job of it.

lxml.html parsing and utf-8 with requests

i used requests to retrieve a url which contains some unicode characters, and want to do some processing with it , then write it out.
r=requests.get(url)
f=open('unicode_test_1.html','w');f.write(r.content);f.close()
html = lxml.html.fromstring(r.content)
htmlOut = lxml.html.tostring(html)
f=open('unicode_test_2.html','w');f.write(htmlOut);f.close()
in unicode_test_1.html, all chars looks fine, but in unicode_test_2.html, some chars changed to gibberish, why is that ?
i then tried
html = lxml.html.fromstring(r.text)
htmlOut = lxml.html.tostring(html,encoding='latin1')
f=open('unicode_test_2.html','w');f.write(htmlOut);f.close()
it seems it's working now. but i don't know why is this happening, always use latin1 ?
what's the difference between r.text and r.content, and why can't i write html out using encoding='utf-8' ?

You've not specified if you're using python 2 or 3. Encoding is handled quite differently depending on which version you're using. The following advice is more or less universal anyway.
The difference between r.text and r.content is in the Requests docs. Simply put Requests will attempt to figure out the character encoding for you and return Unicode after decoding it. This which is accessible via r.text. To get just the bytes use r.content.
You really need to get to grips with encodings. Read http://www.joelonsoftware.com/articles/Unicode.html and watch https://www.youtube.com/watch?v=sgHbC6udIqc to get started. Also, do a search for "Overcoming frustration: Correctly using unicode in python2" for additional help.
Just to clarify, it's not as simple as always use one encoding over another. Make a Unicode sandwich by doing any I/O in bytes and work with Unicode in your application. If you start with bytes (isinstance(mytext, str)) you need to know the encoding to decode to Unicode, if you start with Unicode (isinstance(mytext, unicode)) you should encode to UTF-8 as it will handle all the worlds characters.
Make sure your editor, files, server and database are configured to UTF-8 also otherwise you'll get more 'gibberish'.
If you want further help post the source files and output of your script.

Decoding unicode from Javascript in Python & Django

On a website I have the word pluș sent via POST to a Django view.
It is sent as plu%25C8%2599. So I took that string and tried to figure out a way how to make %25C8%2599 back into ș.
I tried decoding the string like this:
from urllib import unquote_plus
s = "plu%25C8%2599"
print unquote_plus(unquote_plus(s).decode('utf-8'))
The result i get is pluÈ which actually has a length of 5, not 4.
How can I get the original string pluș after it's encoded ?
edit:
I managed to do it like this
def js_unquote(quoted):
quoted = quoted.encode('utf-8')
quoted = unquote_plus(unquote_plus(quoted)).decode('utf-8')
return quoted
It looks weird but works the way I needed it.

URL-decode twice, then decode as UTF-8.

You can't unless you know what the encoding is. Unicode itself is not an encoding. You might try BeautifulSoup or UnicodeDammit, which might help you get the result you were hoping for.
http://www.crummy.com/software/BeautifulSoup/
I hope this helps!
Also take a look at:
http://www.joelonsoftware.com/articles/Unicode.html

unquote_plus(s).encode('your_lang_encoding')
I was try like that. I was tried to sent a json POST request by HTML form to directly a django URI, which is included unicode characters like "şğüöçı+" and it works. I have used iso_8859-9 encoder in encode() function.