Related
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I'm trying to play sound files (.wav) with pygame but when I start it I never hear anything.
This is the code:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
I also tried using channels but the result is the same
For me (on Windows 7, Python 2.7, PyGame 1.9) I actually have to remove the pygame.init() call to make it work or if the pygame.init() stays to create at least a screen in pygame.
My example:
import time, sys
from pygame import mixer
# pygame.init()
mixer.init()
sound = mixer.Sound(sys.argv[1])
sound.play()
time.sleep(5)
sounda.play() returns an object which is necessary for playing the sound. With it you can also find out if the sound is still playing:
channela = sounda.play()
while channela.get_busy():
pygame.time.delay(100)
I had no sound from playing mixer.Sound, but it started to work after i created the window, this is a minimal example, just change your filename, run and press UP key to play:
WAVFILE = 'tom14.wav'
import pygame
from pygame import *
import sys
mixer.pre_init(frequency=44100, size=-16, channels=2, buffer=4096)
pygame.init()
print pygame.mixer.get_init()
screen=pygame.display.set_mode((400,400),0,32)
while True:
for event in pygame.event.get():
if event.type == QUIT:
pygame.quit()
sys.exit()
if event.type == KEYDOWN:
if event.key==K_ESCAPE:
pygame.quit()
sys.exit()
elif event.key==K_UP:
s = pygame.mixer.Sound(WAVFILE)
ch = s.play()
while ch.get_busy():
pygame.time.delay(100)
pygame.display.update()
What you need to do is something like this:
import pygame
import time
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("desert_rustle.wav")
sounda.play()
time.sleep (20)
The reason I told the program to sleep is because I wanted a way to keep it running without typing lots of code. I had the same problem and the sound didn't play because the program closed immediately after trying to play the music.
In case you want the program to actually do something just type all the necessary code but make sure it will last long enough for the sound to fully play.
import pygame, time
pygame.mixer.init()
pygame.init()
sounda= pygame.mixer.Sound("beep.wav")
sounda.play()
pygame.init() goes after mixer.init(). It worked for me.
I had the same problem under windows 7. In my case I wasn't running the code as Administrator. Don't ask me why, but opening a command line as administrator fixed it for me.
I think what you need is pygame.mixer.music:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
You missed to wait for the sound to finish. Your application will start playing the sound but will exit immediately.
If you want to play a single wav file, you have to initialize the module and create a pygame.mixer.Sound() object from the file. Invoke play() to start playing the file. Finally, you have to wait for the file to play.
Use get_length() to get the length of the sound in seconds and wait for the sound to finish:
(The argument to pygame.time.wait() is in milliseconds)
import pygame
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
pygame.time.wait(int(sounda.get_length() * 1000))
Alternatively you can use pygame.mixer.get_busy to test if a sound is being mixed. Query the status of the mixer continuously in a loop.
In the loop, you need to delay the time by either pygame.time.delay or pygame.time.Clock.tick. In addition, you need to handle the events in the application loop. See pygame.event.get() respectively pygame.event.pump():
For each frame of your game, you will need to make some sort of call to the event queue. This ensures your program can internally interact with the rest of the operating system.
import pygame
pygame.init()
pygame.mixer.init()
sounda = pygame.mixer.Sound('desert_rustle.wav')
sounda.play()
while pygame.mixer.get_busy():
pygame.time.delay(10)
pygame.event.poll()
Your code plays desert_rustle.wav quite fine on my machine (Mac OSX 10.5, Python 2.6.4, pygame 1.9.1). What OS and Python and pygame releases are you using? Can you hear the .wav OK by other means (e.g. open on a Mac's terminal or start on a Windows console followed by the filename/path to the .wav file) to guarante the file is not damaged? It's hard to debug your specific problem (which is not with the code you give) without being able to reproduce it and without having all of these crucial details.
Just try to re-save your wav file to make sure its frequency info. Or you can record a sound to make sure its frequency,bits,size and channels.(I use this method to solve this problem)
I've had something like this happen. Maybe you have the same problem? Try using an absolute path:
import pygame
pygame.init()
pygame.mixer.init()
sounda= pygame.mixer.Sound("/absolute_path/desert_rustle.wav")
sounda.play()
Where abslute_path is obviously replaced with your actual absolute path ;)
good luck.
import pygame
pygame.init()
sound = pygame.mixer.Sound("desert_rustle.wav")
pygame.mixer.Sound.play(sound)
This will work on python 3
5 years late answer but I hope I can help someone.. :-)
Firstly, you dont need the "pygame.init()"-line.
Secondly, make a loop and play the sound inside that, or else pygame.mixer will start, and stop playing again immediately.
I got this code to work fine on my Raspberry pi with Raspbian OS.
Note that I used a while-loop that continues to loop the sound forver.
import pygame.mixer
pygame.mixer.init()
sounda = pygame.mixer.Sound("desert_rustle.wav")
while True:
sounda.play()
Just try:
import pygame.mixer
from time import sleep
pygame.mixer.init()
pygame.mixer.music.load(open("\windows\media\chimes.wav","rb"))
print ""
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
sleep(1)
print "done"
This should work. You just need to add print ""and the sound will have
had time to load its self.
Many of the posts are running all of this at toplevel, which is why the sound may seem to close. The final method will return while the sound is playing, which closes the program/terminal/process (depending on how called).
What you will eventually want is a probably a class that can call either single time playback or a looping function (both will be called, and will play over each other) for background music and single sound effects.
Here is pattern, that uses a different event loop / run context other than Pygame itself, (I am using tkinter root level object and its init method, you will have to look this up for your own use case) once you have either the Pygame.init() runtime or some other, you can call these methods from your own logic, unless you are exiting the entire runtime, each file playback (either single use or looping)
this code covers the init for ONLY mixer (you need to figure our your root context and where the individual calls should be made for playback, at least 1 level inside root context to be able to rely on the main event loop preventing premature exit of sound files, YOU SHOULD NOT NEED TIME.SLEEP() AT ALL (very anti-pattern here).... ALSO whatever context calls the looping forever bg_music, it will probably be some 'level' or 'scene' or similar in your game/app context, when passing from one 'scene' to the next you will probably want to immediately replace the bg_music with the file for next 'scene', and if you need the fine-grained control stopping the sound_effect objects that are set to play once (or N times)....
from pygame import mixer
bg_music = mixer.Channel(0)
sound_effects = mixer.Channel(1)
call either of these from WITHIN your inner logic loops
effect1 = mixer.Sound('Sound_Effects/'+visid+'.ogg')
sound_effects.play(effect1, 0)
sound1 = mixer.sound('path to ogg or wav file')
bg_music.play(sound1, -1) # play object on this channel, looping forever (-1)
do this:
import pygame
pygame.mixer.init()
pygame.mixer.music.load("desert_rustle.wav")
pygame.mixer.music.play(0)
I think that your problem is that the file is a WAV file.
It worked for me with an MP3. This will probably work on python 3.6.
I made a program to play music at random using python-pygame.
When I tried to run, the audio did not play ...
By the way, I think that the problem is pygame because the volume is MAX and it can be heard normally even when playing .mp3
music.py
import pygame
import sys
import glob
from random import shuffle
x = glob.glob("sound/*.mp3")
shuffle(x)
print(x[1])
pygame.mixer.init()
pygame.mixer.music.load(x[1])
pygame.mixer.music.play(2)
while False:
x = 1
pygame.mixer.music.stop()
sys.exit()
Seems you want to play only one file randomly chosen. You want something like this:
import pygame
import sys
import glob
from random import choice
allmusic = glob.glob("*.mp3")
played = choice(allmusic) #select randomly one element from the list
print(played) #print the name of the chosen file
pygame.mixer.init()
pygame.mixer.music.load(played)
pygame.mixer.music.play()
while pygame.mixer.music.get_busy():
pass
the last while loop checks if the music is played, and do nothing until the music ends. It's purpose is to keep the program alive, otherwise it ends immediately and the music stream is terminated.
Notice that you do not have control on the music, it will play until the end with no way to stop it before. To have some control of this kind, you need a more complex script handling events (from keyboard or a custom GUI interface you create, but this is going too far from your question I think).
I'm trying to shuffle a list of mp3 files and then play through them with pyglet. Once the player runs out of sources I want to re-shuffle the list, and then play through them again. This process would happen infinitely. I have been able to get pyglet to play through the sources once, but the on_player_eos event is never fired when I run out of sources. I'm not sure exactly what I am doing wrong, or if I am approaching it in the wrong way. I've tried a couple ways of doing it, but have had no luck getting it to work. Here is the code
import os, sys, random, pyglet
from random import shuffle
song1 = pyglet.media.load('beats/breathe.mp3', streaming=False)
song2 = pyglet.media.load('beats/everything.mp3', streaming=False)
song3 = pyglet.media.load('beats/jazz.mp3', streaming=False)
player = pyglet.media.Player()
# Play beatz
def beatz():
playlist = [song1, song2, song3]
shuffle(playlist)
player.queue(playlist[0])
player.queue(playlist[1])
player.queue(playlist[2])
player.play()
def on_player_eos():
print('repeating')
beatz()
player.on_player_eos = on_player_eos
pyglet.app.run()
I have also tried replacing the 'player.on_player_eos = on_player_eos' with
player.push_handlers(on_player_eos)
But it doesnt seem to do anything either. Any help appreciated.
UPDATE:
I was able to get this to work by simply adding 'streaming=False' to each song variable. Streaming sources in pyglet can only be queued once on a player object, while static sources can be queued as many times as you want.
With recognizing the event 'on_player_eos', I also wasn't aware of the pyglet event loop. In order for pyglet to pick up the events I wanted it to, the code below had to be run.
pyglet.app.run()
This fixed my problems.
I'm having trouble playing this single .wav file: http://s000.tinyupload.com/?file_id=05630565903583383733
All I get is a quick "tick" sound. Tried another .wav and it plays fine. Tried resampling, and converting to .ogg, still same issue.
.get_length() returns 0.00031746 when the original .wav length is 176ms.
Changing pygame.mixer.init parameters alters .get_length() but still a very low value.
import pygame
from pygame.locals import *
from sys import exit
pygame.init()
screen = pygame.display.set_mode((800, 600), 0, 0)
blip_sound = pygame.mixer.Sound('C:\Users\me\Desktop\blip.wav')
blip_sound.play()
print blip_sound.get_length()
while True:
for event in pygame.event.get():
if event.type == QUIT:
exit()
SOLVED: I changed to use only 'blip.wav' instead of 'C:\users\me\Desktop\blip.wav' just to organize things (putting the .wav in the same folder of my script) and the sound started working!
It's strange because one .wav file it could read from desktop, but the other it couldn't... Also I learned that no error is raised when pygame can't open a sound file... The sound just won't play (different from images, where the code won't compile).