As part of a project I'm working on, I need to find the centre-point of some "blobs" in an image using OpenCV with Python.
I'm having a bit of trouble with it, and would truly appreciate any help or insight :)
My current method is to: get the contours of the images, overlay ellipses on those, use the blob detector to find the centre of each of these.
This works fairly well, but occasionally I have extraneous blobs that I need to ignore, and sometimes the blobs are touching each-other.
Here's an example of when it goes well:
Good source image:
After extracting contours:
With the blobs detected:
And when it goes poorly (you can see that it's incorrectly overlayed an ellipse over three blobs, and detected one that I don't want):
Bad source image:
After extracting contours:
With the blobs detected:
This is the code I currently use. I'm unsure of any other option.
def process_and_detect(img_path):
img = cv2.imread(path)
imgray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret, thresh = cv2.threshold(imgray, 50, 150, 0)
im2, contours, hierarchy = cv2.findContours(thresh, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
drawn_img = np.zeros(img.shape, np.uint8)
min_area = 50
min_ellipses = []
for cnt in contours:
if cv2.contourArea(cnt) >= min_area:
ellipse = cv2.fitEllipse(cnt)
cv2.ellipse(drawn_img,ellipse,(0,255,0),-1)
plot_img(drawn_img, size=12)
# Change thresholds
params = cv2.SimpleBlobDetector_Params()
params.filterByColor = True
params.blobColor = 255
params.filterByCircularity = True
params.minCircularity = 0.75
params.filterByArea = True
params.minArea = 150
# Set up the detector
detector = cv2.SimpleBlobDetector_create(params)
# Detect blobs.
keypoints = detector.detect(drawn_img)
for k in keypoints:
x = round(k.pt[0])
y = round(k.pt[1])
line_length = 20
cv2.line(img, (x-line_length, y), (x+line_length, y), (255, 0, 0), 2)
cv2.line(img, (x, y-line_length), (x, y+line_length), (255, 0, 0), 2)
plot_img(img, size=12)
Thank you so much for reading this far, I sincerely hope someone can help me out, or point me in the right direction. Thanks!
Blob detector
Currently, your implementation is redundant. From the SimpleBlobDetector() docs:
The class implements a simple algorithm for extracting blobs from an image:
Convert the source image to binary images by applying thresholding with several thresholds from minThreshold (inclusive) to maxThreshold (exclusive) with distance thresholdStep between neighboring thresholds.
Extract connected components from every binary image by findContours() and calculate their centers.
Group centers from several binary images by their coordinates. Close centers form one group that corresponds to one blob, which is controlled by the minDistBetweenBlobs parameter.
From the groups, estimate final centers of blobs and their radiuses and return as locations and sizes of keypoints.
So you're implementing part of the steps already, which might give some unexpected behavior. You could try playing with the parameters to see if you can figure out some that work for you (try creating trackbars to play with the parameters and get live results of your algorithm with different blob detector parameters).
Modifying your pipeline
However, you've already got most of your own pipeline written, so you can easily remove the blob detector and implement your own algorithm. If you simply drop your threshold a bit, you can easily get clearly marked circles, and then blob detection is as simple as contour detection. If you have a separate contour for each blob, then you can calculate the centroid of the contour with moments(). For example:
def process_and_detect(img_path):
img = cv2.imread(img_path)
imgray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret, thresh = cv2.threshold(imgray, 100, 255, cv2.THRESH_BINARY)
contours = cv2.findContours(thresh, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)[1]
line_length = 20
for c in contours:
if cv2.contourArea(c) >= min_area:
M = cv2.moments(c)
x = int(M['m10']/M['m00'])
y = int(M['m01']/M['m00'])
cv2.line(img, (x-line_length, y), (x+line_length, y), (255, 0, 0), 2)
cv2.line(img, (x, y-line_length), (x, y+line_length), (255, 0, 0), 2)
Getting more involved
This same pipeline can be used to automatically loop through threshold values so you don't have to guess and hardcode those values. Since the blobs all seem roughly the same size, you can loop through until all contours have roughly the same area. You could do this for e.g. by finding the median contour size, defining some percentage of that median size above and below that you'll allow, and checking if all the contours detected fit in those bounds.
Here's an animated gif of what I mean. Notice that the gif stops once the contours are separated:
Then you can simply find the centroids of those separated contours. Here's the code:
def process_and_detect(img_path):
img = cv2.imread(img_path)
imgray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
for thresh_val in range(0, 255):
# threshold and detect contours
thresh = cv2.threshold(imgray, thresh_val, 255, cv2.THRESH_BINARY)[1]
contours = cv2.findContours(thresh,
cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)[1]
# filter contours by area
min_area = 50
filtered_contours = [c for c in contours
if cv2.contourArea(c) >= min_area]
area_contours = [cv2.contourArea(c) for c in filtered_contours]
# acceptable deviation from median contour area
median_area = np.median(area_contours)
dev = 0.3
lowerb = median_area - dev*median_area
upperb = median_area + dev*median_area
# break when all contours are within deviation from median area
if ((area_contours > lowerb) & (area_contours < upperb)).all():
break
# draw center location of blobs
line_length = 8
cross_color = (255, 0, 0)
for c in filtered_contours:
M = cv2.moments(c)
x = int(M['m10']/M['m00'])
y = int(M['m01']/M['m00'])
cv2.line(img, (x-line_length, y), (x+line_length, y), cross_color, 2)
cv2.line(img, (x, y-line_length), (x, y+line_length), cross_color, 2)
Note that here I looped through all possible threshold values with range(0, 255) to give 0, 1, ..., 254 but really you could start higher and skip through a few values at a time with, say, range(50, 200, 5) to get 50, 55, ..., 195 which would of course be much faster.
The "standard" approach for such blob-splitting problem is by means of the watershed transform. It can be applied on the binary image, using a transform distance, or directly on the grayscale image.
Oversegmentation problems can make it tricky, but it seems that your case will not suffer from that.
To find the center, I would usually recommend a weighted average of the pixel coordinates to get a noise reduction effect, but in this case I would probably go for the location of the maximum intensity, which won't be influenced by the deformation of the shape.
Here is what you get with a grayscale watershed (the region intensity is the average). Contrary to what I initially thought, there is some fragmentation due to irregularities in the blobs
You can improve with a little of lowpass filtering before segmentation.
Related
I want to detect and count the objects inside an image that touch while ignoring what could be considered as a single object. I have the basic image, on which i tried applying a cv2.HoughCircles() method to try and identify some circles. I then parsed the returned array and tried using cv2.circle() to draw them on the image.
However, I seem to always get too many circles returned by cv2.HoughCircles() and couldn't figure out how to only count the objects that are touching.
This is the image i was working on
My code so far:
import numpy
import matplotlib.pyplot as pyp
import cv2
segmentet = cv2.imread('photo')
houghCircles = cv2.HoughCircles(segmented, cv2.HOUGH_GRADIENT, 1, 80, param1=450, param2=10, minRadius=30, maxRadius=200)
houghArray = numpy.uint16(houghCircles)[0,:]
for circle in houghArray:
cv2.circle(segmented, (circle[0], circle[1]), circle[2], (0, 250, 0), 3)
And this is the image i get, which is quite a far shot from want i really want.
How can i properly identify and count said objects?
Here is one way in Python OpenCV by getting contour areas and the convex hull area of the contours. The take the ratio (area/convex_hull_area). If small enough, then it is a cluster of blobs. Otherwise it is an isolated blob.
Input:
import cv2
import numpy as np
# read input image
img = cv2.imread('blobs_connected.jpg')
# convert to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# threshold to binary
thresh = cv2.threshold(gray, 128, 255, cv2.THRESH_BINARY)[1]
# find contours
#label_img = img.copy()
contour_img = img.copy()
contours = cv2.findContours(thresh, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
index = 1
isolated_count = 0
cluster_count = 0
for cntr in contours:
area = cv2.contourArea(cntr)
convex_hull = cv2.convexHull(cntr)
convex_hull_area = cv2.contourArea(convex_hull)
ratio = area / convex_hull_area
#print(index, area, convex_hull_area, ratio)
#x,y,w,h = cv2.boundingRect(cntr)
#cv2.putText(label_img, str(index), (x,y), cv2.FONT_HERSHEY_COMPLEX_SMALL, 1, (0,0,255), 2)
if ratio < 0.91:
# cluster contours in red
cv2.drawContours(contour_img, [cntr], 0, (0,0,255), 2)
cluster_count = cluster_count + 1
else:
# isolated contours in green
cv2.drawContours(contour_img, [cntr], 0, (0,255,0), 2)
isolated_count = isolated_count + 1
index = index + 1
print('number_clusters:',cluster_count)
print('number_isolated:',isolated_count)
# save result
cv2.imwrite("blobs_connected_result.jpg", contour_img)
# show images
cv2.imshow("thresh", thresh)
#cv2.imshow("label_img", label_img)
cv2.imshow("contour_img", contour_img)
cv2.waitKey(0)
Clusters in Red, Isolated blobs in Green:
Textual Information:
number_clusters: 4
number_isolated: 81
approach it in steps.
label connected components. two connected blobs get the same label because they're connected. so far so good.
now separate your blobs. use watershed (first comment) or whatever other method gives you results. I can't fully predict the watershed approach. it might deal with touching blobs of dissimilar size or it might do something silly. the sample/tutorial also assumes a minimum size (0.7 * max peak); plug in something absolute in pixels maybe.
then, for each separated blob, check which label it sits on (take coordinates of centroid to be safe), and note down a +1 for that label (a histogram).
any label that has more than one separated blob sitting on it, would be what you are looking for.
I'm currently working on an algorithm to detect bacterial centroids in microscopy images.
This question is a continuation of: OpenCV/Python — Matching Centroid Points of Bacteria in Two Images: Python/OpenCV — Matching Centroid Points of Bacteria in Two Images
I am using a modified version of the program proposed by Rahul Kedia.
https://stackoverflow.com/a/63049277/13696853
Currently, the issues in segmentation I am working on are:
Low Contrast
Clustering
The images below are sampled a second apart. However, in the latter image, one of the bacteria does not get detected.
Bright-field Image #1
Bright-Field Image #2
Bright-Field Contour Image #1
Bright-Field Contour Image #2
Bright-Field Image #1 (Unsegmented)
Bright-Field Image #2 (Unsegmented)
I want to know, given that I can successfully determine bacterial centroids in an image, can I use the data to intelligently look for the same bacteria in the subsequent image?
I haven't been able to find anything substantial online; I believe SIFT/SURF would likely be ineffective as the bacteria have the same appearance. Moreover, I am looking for specific points in the images. You can view my program below. Insert a specific path as indicated if you'd like to run the program.
import cv2
import numpy as np
import os
kernel = np.array([[0, 0, 1, 0, 0],
[0, 1, 1, 1, 0],
[1, 1, 1, 1, 1],
[0, 1, 1, 1, 0],
[0, 0, 1, 0, 0]], dtype=np.uint8)
def e_d(image, it):
image = cv2.erode(image, kernel, iterations=it)
image = cv2.dilate(image, kernel, iterations=it)
return image
path = r"[INSERT PATH]"
img_files = [file for file in os.listdir(path)]
def segment_index(index: int):
segment_file(img_files[index])
def segment_file(img_file: str):
img_path = path + "\\" + img_file
print(img_path)
img = cv2.imread(img_path)
img = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# Applying adaptive mean thresholding
th = cv2.adaptiveThreshold(img, 255, cv2.ADAPTIVE_THRESH_MEAN_C, cv2.THRESH_BINARY_INV, 11, 2)
# Removing small noise
th = e_d(th.copy(), 1)
# Finding contours with RETR_EXTERNAL flag and removing undesired contours and
# drawing them on a new image.
cnt, hie = cv2.findContours(th, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
cntImg = th.copy()
for contour in cnt:
x, y, w, h = cv2.boundingRect(contour)
# Eliminating the contour if its width is more than half of image width
# (bacteria will not be that big).
if w > img.shape[1] / 2:
continue
cntImg = cv2.drawContours(cntImg, [cv2.convexHull(contour)], -1, 255, -1)
# Removing almost all the remaining noise.
# (Some big circular noise will remain along with bacteria contours)
cntImg = e_d(cntImg, 3)
# Finding new filtered contours again
cnt2, hie2 = cv2.findContours(cntImg, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
# Now eliminating circular type noise contours by comparing each contour's
# extent of overlap with its enclosing circle.
finalContours = [] # This will contain the final bacteria contours
for contour in cnt2:
# Finding minimum enclosing circle
(x, y), radius = cv2.minEnclosingCircle(contour)
center = (int(x), int(y))
radius = int(radius)
# creating a image with only this circle drawn on it(filled with white colour)
circleImg = np.zeros(img.shape, dtype=np.uint8)
circleImg = cv2.circle(circleImg, center, radius, 255, -1)
# creating a image with only the contour drawn on it(filled with white colour)
contourImg = np.zeros(img.shape, dtype=np.uint8)
contourImg = cv2.drawContours(contourImg, [contour], -1, 255, -1)
# White pixels not common in both contour and circle will remain white
# else will become black.
union_inter = cv2.bitwise_xor(circleImg, contourImg)
# Finding ratio of the extent of overlap of contour to its enclosing circle.
# Smaller the ratio, more circular the contour.
ratio = np.sum(union_inter == 255) / np.sum(circleImg == 255)
# Storing only non circular contours(bacteria)
if ratio > 0.55:
finalContours.append(contour)
finalContours = np.asarray(finalContours)
# Finding center of bacteria and showing it.
bacteriaImg = cv2.cvtColor(img, cv2.COLOR_GRAY2BGR)
for bacteria in finalContours:
M = cv2.moments(bacteria)
cx = int(M['m10'] / M['m00'])
cy = int(M['m01'] / M['m00'])
bacteriaImg = cv2.circle(bacteriaImg, (cx, cy), 5, (0, 0, 255), -1)
cv2.imshow("bacteriaImg", bacteriaImg)
cv2.waitKey(0)
# Segment Each Image
for i in range(len(img_files)):
segment_index(i)
Edit #1: Applying frmw42's approach, this image seems to get lost. I have tried adjusting a number of parameters but the image does not seem to show up.
Bright-Field Image #3
Bright-Field Image #4
Here is my Python/OpenCV code to extract your bacteria. I simply threshold, then get the contours and draw filled contours for those within a certain area range. I will let you do any further processing that you want. I simply viewed each step to make sure I have tuned the arguments appropriately before moving to the next step.
Input 1:
Input 2:
import cv2
import numpy as np
# read image
#img = cv2.imread("bacteria1.png")
img = cv2.imread("bacteria2.png")
# convert img to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
gray = 255 - gray
# do adaptive threshold on inverted gray image
thresh = cv2.adaptiveThreshold(gray, 255, cv2.ADAPTIVE_THRESH_MEAN_C, cv2.THRESH_BINARY, 21, 5)
result = np.zeros_like(img)
contours = cv2.findContours(thresh , cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
for cntr in contours:
area = cv2.contourArea(cntr)
if area > 600 and area < 1100:
cv2.drawContours(result, [cntr], 0, (255,255,255), -1)
# write results to disk
#cv2.imwrite("bacteria_filled_contours1.png", result)
cv2.imwrite("bacteria_filled_contours2.png", result)
# display it
cv2.imshow("thresh", thresh)
cv2.imshow("result", result)
cv2.waitKey(0)
Result 1:
Result 2:
Adjust as desired.
It would seem that adaptive threshold is not able to handle all your various images. I suspect nothing simple will. You may need to use AI with training. Nevertheless, this works for your images: 1, 2 and 4 in Python/OpenCV. I make no guarantee that it will work for any of your other images.
First I found a simple threshold that seems to work, but brings in other regions. So since all your bacteria have similar shapes and range of orientations, I fit and ellipse to your bacteria and get the orientation of the major axis and filter the contours with area and angle.
import cv2
import numpy as np
# read image
#img = cv2.imread("bacteria1.png")
#img = cv2.imread("bacteria2.png")
img = cv2.imread("bacteria4.png")
# convert img to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
gray = 255 - gray
# median filter
#gray = cv2.medianBlur(gray, 1)
# do simple threshold on inverted gray image
thresh = cv2.threshold(gray, 170, 255, cv2.THRESH_BINARY)[1]
result = np.zeros_like(img)
contours = cv2.findContours(thresh , cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
for cntr in contours:
area = cv2.contourArea(cntr)
if area > 600 and area < 1100:
ellipse = cv2.fitEllipse(cntr)
(xc,yc),(d1,d2),angle = ellipse
if angle > 90:
angle = angle - 90
else:
angle = angle + 90
print(angle,area)
if angle >= 150 and angle <= 250:
cv2.drawContours(result, [cntr], 0, (255,255,255), -1)
# write results to disk
#cv2.imwrite("bacteria_filled_contours1.png", result)
#cv2.imwrite("bacteria_filled_contours2.png", result)
cv2.imwrite("bacteria_filled_contours4.png", result)
# display it
cv2.imshow("thresh", thresh)
cv2.imshow("result", result)
cv2.waitKey(0)
Result for image 1:
Result for image 2:
Result for image 4:
You might explore noise reduction before thresholding. I had some success with using some of ImageMagick tools and there is a Python version called Python Wand that uses ImageMagick.
I want to count the number of metal rods in an image using image processing. The images are all similar to this one:
I thought of using Hough Circle Transform, but the rods aren't precisely circular and also there are imperfections on the faces. Another idea was to use watershed algorithm. I took following steps:
Grayscale conversion
a CLAHE enhancement
Pyramid Mean Shift Filter to remove the texture and irregularities
Applied a gaussian blur.
Otsu's Thresholding
Result:
upper image is after 4, lower after 5
Clearly, I cannot use this image for Watershed.
I then tried using a simple thresholding, which gives better results, but still not accurate enough. Also I want the counting algorithm to be independent of the image used, and that means simple thresholding won't do.
I searched the net for algorithms to detect circular objects, but they all seem to be dependent on the segmentation or edge detection. I don't understand how to proceed from this point. Am I missing something basic here?
Edit: The basic preprocessing code:
img = cv2.imread('testc.jpg')
img = cv2.pyrMeanShiftFiltering(img, 21, 51)
img = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
clahe = cv2.createCLAHE(clipLimit=3.0, tileGridSize=(7,7))
cl1 = clahe.apply(img)
cl1 = cv2.GaussianBlur(cl1, (5,5), 1)
ret3,thresh = cv2.threshold(cl1,0,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
Watershed:
D = ndimage.distance_transform_edt(thresh)
localMax = peak_local_max(D, indices=False, min_distance=35,
labels=thresh)
# perform a connected component analysis on the local peaks,
# using 8-connectivity, then appy the Watershed algorithm
markers = ndimage.label(localMax, structure=np.ones((3, 3)))[0]
labels = watershed(-D, markers, mask=thresh)
print("[INFO] {} unique segments found".format(len(np.unique(labels)) - 1))
# loop over the unique labels returned by the Watershed
# algorithm
for label in np.unique(labels):
# if the label is zero, we are examining the 'background'
# so simply ignore it
if label == 0:
continue
# otherwise, allocate memory for the label region and draw
# it on the mask
mask = np.zeros(gray.shape, dtype="uint8")
mask[labels == label] = 255
# detect contours in the mask and grab the largest one
cnts = cv2.findContours(mask.copy(), cv2.RETR_EXTERNAL,
cv2.CHAIN_APPROX_SIMPLE)[-2]
c = max(cnts, key=cv2.contourArea)
# draw a circle enclosing the object
((x, y), r) = cv2.minEnclosingCircle(c)
cv2.circle(img, (int(x), int(y)), int(r), (0, 255, 0), 2)
cv2.putText(img, "#{}".format(label), (int(x) - 10, int(y)),
cv2.FONT_HERSHEY_SIMPLEX, 0.6, (0, 0, 255), 2)
Code for Watershed algorithm I took mostly from pyimagesearch I am sorry for not giving the link, I am allowed to post only two links currently (and No Images).
This is not the only thing that I have tried, but is the best approach currently.
I am working on automatically correcting a bubble-sheet tests that are scanned.
Currently, I can extract the solutions part of the sheet and fix its rotation.
So I have this image.
The output image with detected contours
Running the following code yields in the output image
def get_answers(image):
display_normal("Just image",image)
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
blurry = cv2.GaussianBlur(gray, (3, 3), 1)
thresh = cv2.threshold(blurry, 225, 255,
cv2.THRESH_BINARY_INV)[1]
display_normal("Binary", thresh)
# find contours in the thresholded image, then initialize
# the list of contours that correspond to questions
cnts = cv2.findContours(thresh.copy(), cv2.RETR_EXTERNAL,
cv2.CHAIN_APPROX_SIMPLE)
cnts = cnts[1]
questionCnts = []
# loop over the contours
for c in cnts:
# compute the bounding box of the contour, then use the
# bounding box to derive the aspect ratio
(x, y, w, h) = cv2.boundingRect(c)
ar = w / float(h)
# in order to label the contour as a question, region
# should be sufficiently wide, sufficiently tall, and
# have an aspect ratio approximately equal to 1
if w >= 18 and h >= 18 and 0.9 <= ar and ar <= 1.2:
questionCnts.append(c)
cv2.drawContours(image, questionCnts, -1, (255, 0, 0), 1)
display_normal("Image with contours",image.copy())
if(questionCnts < 45*4):
raise Exception("Didn't found all possible answers")
Here is the problem : I convert the input image to binary and try to find contours that looks like a circle, but I can't find the whole possible 45*4 choices.. I fail to detect some of these circles..
So is there any better idea/algorithm to do this specific task ?
You could have tried using adaptive threshold:
adapt_thresh = cv2.adaptiveThreshold(equ, 255, cv2.ADAPTIVE_THRESH_GAUSSIAN_C, cv2.THRESH_BINARY_INV, 11, 2)
cv2.imshow('adapt_thresh.jpg', adapt_thresh)
(I resized the original image to keep it smaller)
UPDATE:
Another approach that I just performed.......
I equalized the gray scale image using histogram equalization:
equalized_img = cv2.equalizeHist(gray)
cv2.imshow('Equalized Image.jpg', equalized_img )
I then obtained the median of the equalized image using np.median(equalized_img) and applied a binary threshold by selecting all pixel values below [0.6 * median]
ret, thresh = cv2.threshold(equalized_img, lower, 255, 1)
cv2.imwrite("Final Image.jpg", thresh)
Now you can go ahead and find your desired contours on this image.
Hope it helps .. :)
I have taken out the laser curve of this image :
(source: hostingpics.net)
And now, I'm trying to obtain a set of points (the more, the better), which are in the middle of this curve.
I have tried to split the image into vertical stripes, and then to detect the centroid.
But it doesn't calculate lots of points, and it's not satisfactory at all !
img = cv2.Canny(img,50,150,apertureSize = 3)
sub = 100
step=int(img.shape[1]/sub)
centroid=[]
for i in range(sub):
x0= i*step
x1=(i+1)*step-1
temp = img[:,x0:x1]
hierarchy,contours,_ = cv2.findContours(temp, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
if contours <> []:
for i in contours :
M = cv2.moments(i)
if M['m00'] <> 0:
centroid.append((x0+int(M['m10']/M['m00']),(int(M['m01']/M['m00']))))
I also tried cv2.fitLine(), but it wasn't satisfactory either.
How could I detect points in the middle of this curve efficiently ? regards.
I think you are getting fewer points because of the following two reasons:
using an edge detector: depending on the thresholds, sometimes the edges may not reasonably represent the curve
sampling the image using a large step
Try the following instead.
# threshold the image using a threshold value 0
ret, bw = cv2.threshold(img, 0, 255, cv2.THRESH_BINARY)
# find contours of the binarized image
contours, heirarchy = cv2.findContours(bw, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
# curves
curves = np.zeros((img.shape[0], img.shape[1], 3), np.uint8)
for i in range(len(contours)):
# for each contour, draw the filled contour
draw = np.zeros((img.shape[0], img.shape[1]), np.uint8)
cv2.drawContours(draw, contours, i, (255,255,255), -1)
# for each column, calculate the centroid
for col in range(draw.shape[1]):
M = cv2.moments(draw[:, col])
if M['m00'] != 0:
x = col
y = int(M['m01']/M['m00'])
curves[y, x, :] = (0, 0, 255)
I get a curve like this:
You can also use distance transform and then get the row associated with max distance value for each column of individual contours.