Similar to posting: Replace string in a specific line using python, however results were not forethcomming in my slightly different instance.
I working with python 3 on windows 7. I am attempting to batch edit some files in a directory. They are basically text files with .LIC tag. I'm not sure if that is relevant to my issue here. I am able to read the file into python without issue.
My aim is to replace a specific string on a specific line in this file.
import os
import re
groupname = 'Oldtext'
aliasname = 'Newtext'
with open('filename') as f:
data = f.readlines()
data[1] = re.sub(groupname,aliasname, data[1])
f.writelines(data[1])
print(data[1])
print('done')
When running the above code I get an UnsupportedOperation: not writable. I am having some issue writing the changes back to the file. Based on suggestion of other posts, I edited added the w option to the open('filename', "w") function. This causes all text in the file to be deleted.
Based on suggestion, the r+ option was tried. This leads to successful editing of the file, however, instead of editing the correct line, the edited line is appended to the end of the file, leaving the original intact.
Writing a changed line into the middle of a text file is not going to work unless it's exactly the same length as the original - which is the case in your example, but you've got some obvious placeholder text there so I have no idea if the same is true of your actual application code. Here's an approach that doesn't make any such assumption:
with open('filename', 'r') as f:
data = f.readlines()
data[1] = re.sub(groupname,aliasname, data[1])
with open('filename', 'w') as f:
f.writelines(data)
EDIT: If you really wanted to write only the single line back into the file, you'd need to use f.tell() BEFORE reading the line, to remember its position within the file, and then f.seek() to go back to that position before writing.
Related
Started Python a week ago and I have some questions to ask about reading and writing to the same files. I've gone through some tutorials online but I am still confused about it. I can understand simple read and write files.
openFile = open("filepath", "r")
readFile = openFile.read()
print readFile
openFile = open("filepath", "a")
appendFile = openFile.write("\nTest 123")
openFile.close()
But, if I try the following I get a bunch of unknown text in the text file I am writing to. Can anyone explain why I am getting such errors and why I cannot use the same openFile object the way shown below.
# I get an error when I use the codes below:
openFile = open("filepath", "r+")
writeFile = openFile.write("Test abc")
readFile = openFile.read()
print readFile
openFile.close()
I will try to clarify my problems. In the example above, openFile is the object used to open file. I have no problems if I want write to it the first time. If I want to use the same openFile to read files or append something to it. It doesn't happen or an error is given. I have to declare the same/different open file object before I can perform another read/write action to the same file.
#I have no problems if I do this:
openFile = open("filepath", "r+")
writeFile = openFile.write("Test abc")
openFile2 = open("filepath", "r+")
readFile = openFile2.read()
print readFile
openFile.close()
I will be grateful if anyone can tell me what I did wrong here or is it just a Pythong thing. I am using Python 2.7. Thanks!
Updated Response:
This seems like a bug specific to Windows - http://bugs.python.org/issue1521491.
Quoting from the workaround explained at http://mail.python.org/pipermail/python-bugs-list/2005-August/029886.html
the effect of mixing reads with writes on a file open for update is
entirely undefined unless a file-positioning operation occurs between
them (for example, a seek()). I can't guess what
you expect to happen, but seems most likely that what you
intend could be obtained reliably by inserting
fp.seek(fp.tell())
between read() and your write().
My original response demonstrates how reading/writing on the same file opened for appending works. It is apparently not true if you are using Windows.
Original Response:
In 'r+' mode, using write method will write the string object to the file based on where the pointer is. In your case, it will append the string "Test abc" to the start of the file. See an example below:
>>> f=open("a","r+")
>>> f.read()
'Test abc\nfasdfafasdfa\nsdfgsd\n'
>>> f.write("foooooooooooooo")
>>> f.close()
>>> f=open("a","r+")
>>> f.read()
'Test abc\nfasdfafasdfa\nsdfgsd\nfoooooooooooooo'
The string "foooooooooooooo" got appended at the end of the file since the pointer was already at the end of the file.
Are you on a system that differentiates between binary and text files? You might want to use 'rb+' as a mode in that case.
Append 'b' to the mode to open the file in binary mode, on systems
that differentiate between binary and text files; on systems that
don’t have this distinction, adding the 'b' has no effect.
http://docs.python.org/2/library/functions.html#open
Every open file has an implicit pointer which indicates where data will be read and written. Normally this defaults to the start of the file, but if you use a mode of a (append) then it defaults to the end of the file. It's also worth noting that the w mode will truncate your file (i.e. delete all the contents) even if you add + to the mode.
Whenever you read or write N characters, the read/write pointer will move forward that amount within the file. I find it helps to think of this like an old cassette tape, if you remember those. So, if you executed the following code:
fd = open("testfile.txt", "w+")
fd.write("This is a test file.\n")
fd.close()
fd = open("testfile.txt", "r+")
print fd.read(4)
fd.write(" IS")
fd.close()
... It should end up printing This and then leaving the file content as This IS a test file.. This is because the initial read(4) returns the first 4 characters of the file, because the pointer is at the start of the file. It leaves the pointer at the space character just after This, so the following write(" IS") overwrites the next three characters with a space (the same as is already there) followed by IS, replacing the existing is.
You can use the seek() method of the file to jump to a specific point. After the example above, if you executed the following:
fd = open("testfile.txt", "r+")
fd.seek(10)
fd.write("TEST")
fd.close()
... Then you'll find that the file now contains This IS a TEST file..
All this applies on Unix systems, and you can test those examples to make sure. However, I've had problems mixing read() and write() on Windows systems. For example, when I execute that first example on my Windows machine then it correctly prints This, but when I check the file afterwards the write() has been completely ignored. However, the second example (using seek()) seems to work fine on Windows.
In summary, if you want to read/write from the middle of a file in Windows I'd suggest always using an explicit seek() instead of relying on the position of the read/write pointer. If you're doing only reads or only writes then it's pretty safe.
One final point - if you're specifying paths on Windows as literal strings, remember to escape your backslashes:
fd = open("C:\\Users\\johndoe\\Desktop\\testfile.txt", "r+")
Or you can use raw strings by putting an r at the start:
fd = open(r"C:\Users\johndoe\Desktop\testfile.txt", "r+")
Or the most portable option is to use os.path.join():
fd = open(os.path.join("C:\\", "Users", "johndoe", "Desktop", "testfile.txt"), "r+")
You can find more information about file IO in the official Python docs.
Reading and Writing happens where the current file pointer is and it advances with each read/write.
In your particular case, writing to the openFile, causes the file-pointer to point to the end of file. Trying to read from the end would result EOF.
You need to reset the file pointer, to point to the beginning of the file before through seek(0) before reading from it
You can read, modify and save to the same file in python but you have actually to replace the whole content in file, and to call before updating file content:
# set the pointer to the beginning of the file in order to rewrite the content
edit_file.seek(0)
I needed a function to go through all subdirectories of folder and edit content of the files based on some criteria, if it helps:
new_file_content = ""
for directories, subdirectories, files in os.walk(folder_path):
for file_name in files:
file_path = os.path.join(directories, file_name)
# open file for reading and writing
with io.open(file_path, "r+", encoding="utf-8") as edit_file:
for current_line in edit_file:
if condition in current_line:
# update current line
current_line = current_line.replace('john', 'jack')
new_file_content += current_line
# set the pointer to the beginning of the file in order to rewrite the content
edit_file.seek(0)
# delete actual file content
edit_file.truncate()
# rewrite updated file content
edit_file.write(new_file_content)
# empties new content in order to set for next iteration
new_file_content = ""
edit_file.close()
I am using the following code to upload a file on server using FTP after editing it:
import fileinput
file = open('example.php','rb+')
for line in fileinput.input('example.php'):
if 'Original' in line :
file.write( line.replace('Original', 'Replacement'))
file.close()
There is one thing, instead of replacing the text in its original place, the code adds the replaced text at the end and the text in original place is unchanged.
Also, instead of just the replaced text, it prints out the whole line. Could anyone please tell me how to resolve these two errors?
1) The code adds the replaced text at the end and the text in original place is unchanged.
You can't replace in the body of the file because you're opening it with the + signal. This way it'll append to the end of the file.
file = open('example.php','rb+')
But this only works if you want to append to the end of the document.
To bypass this you may use seek() to navigate to the specific line and replace it. Or create 2 files: an input_file and an output_file.
2) Also, instead of just the replaced text, it prints out the whole line.
It's because you're using:
file.write( line.replace('Original', 'Replacement'))
Free Code:
I've segregated into 2 files, an inputfile and an outputfile.
First it'll open the ifile and save all lines in a list called lines.
Second, it'll read all these lines, and if 'Original' is present, it'll replace it.
After replacement, it'll save into ofile.
ifile = 'example.php'
ofile = 'example_edited.php'
with open(ifile, 'rb') as f:
lines = f.readlines()
with open(ofile, 'wb') as g:
for line in lines:
if 'Original' in line:
g.write(line.replace('Original', 'Replacement'))
Then if you want to, you may os.remove() the non-edited file with:
More Info: Tutorials Point: Python Files I/O
The second error is how the replace() method works.
It returns the entire input string, with only the specified substring replaced. See example here.
To write to a specific place in the file, you should seek() to the right position first.
I think this issue has been asked before in several places, I would do a quick search of StackOverflow.
Maybe this would help?
Replacing stuff in a file only works well if original and replacement have the same size (in bytes) then you can do
with open('example.php','rb+') as f:
pos=f.tell()
line=f.readline()
if b'Original' in line:
f.seek(pos)
f.write(line.replace(b'Original',b'Replacement'))
(In this case b'Original' and b'Replacement' do not have the same size so your file will look funny after this)
Edit:
If original and replacement are not the same size, there are different possibilities like adding bytes to fill the hole or moving everything after the line.
In regards to the related question, I'd like to know how to add text and/or lines to the beginning of a file in Python, as its been suggested that is an easier language for text/file manipulation. So, while I asked the previous, linked, question for C++, can anyone point me to how to do this with Python?
Quote from the linked (related) question:
I'd like to be able to add lines to the beginning of a file.
This program I am writing will take information from a user, and prep
it to write to a file. That file, then, will be a diff that was
already generated, and what is being added to the beginning is
descriptors and tags that make it compatible with Debian's DEP3 Patch
tagging system.
Anyone got any suggestions, or code?
Related: Adding text and lines to the beginning of a file (C++)
There are lot of similar file I/O questions recently..
In short, you need to create a new file
first, write new lines to the file
read lines from old file and write them to file
If you can guarantee each of your new lines added to the beginning is longer than the each of the corresponding original lines at the beginning, you can do it in place:
f = open('file.txt','r+')
lines = f.readlines() # read old content
f.seek(0) # go back to the beginning of the file
f.write(new_content) # write new content at the beginning
for line in lines: # write old content after new
f.write(line)
f.close()
The example above writes all the data in it's entirety after seeking it's position at beginning of file because the contents of file are over-written with new contents.
Otherwise you need to write to a new file
f = open('file.txt','r')
newf = open('newfile.txt','w')
lines = f.readlines() # read old content
newf.write(new_content) # write new content at the beginning
for line in lines: # write old content after new
newf.write(line)
newf.close()
f.close()
Something like this should work:
with open('new.txt', 'w') as new:
with open('prefix.txt') as prefix:
new.write(prefix.read())
with open('old.txt') as old:
new.write(old.read())
If old.txt or prefix.txt contain binary contents, you should add an 'rb' argument to their respective open calls and a 'b' to the flags argument for the first open() call.
I have text file which I want to erase in Python. How do I do that?
In python:
open('file.txt', 'w').close()
Or alternatively, if you have already an opened file:
f = open('file.txt', 'r+')
f.truncate(0) # need '0' when using r+
Opening a file in "write" mode clears it, you don't specifically have to write to it:
open("filename", "w").close()
(you should close it as the timing of when the file gets closed automatically may be implementation specific)
Not a complete answer more of an extension to ondra's answer
When using truncate() ( my preferred method ) make sure your cursor is at the required position.
When a new file is opened for reading - open('FILE_NAME','r') it's cursor is at 0 by default.
But if you have parsed the file within your code, make sure to point at the beginning of the file again i.e truncate(0)
By default truncate() truncates the contents of a file starting from the current cusror position.
A simple example
As #jamylak suggested, a good alternative that includes the benefits of context managers is:
with open('filename.txt', 'w'):
pass
When using with open("myfile.txt", "r+") as my_file:, I get strange zeros in myfile.txt, especially since I am reading the file first. For it to work, I had to first change the pointer of my_file to the beginning of the file with my_file.seek(0). Then I could do my_file.truncate() to clear the file.
Writing and Reading file content
def writeTempFile(text = None):
filePath = "/temp/file1.txt"
if not text: # If not provided return file content
f = open(filePath, "r")
slug = f.read()
return slug
else:
f = open(filePath, "a") # Create a blank file
f.seek(0) # sets point at the beginning of the file
f.truncate() # Clear previous content
f.write(text) # Write file
f.close() # Close file
return text
It Worked for me
If security is important to you then opening the file for writing and closing it again will not be enough. At least some of the information will still be on the storage device and could be found, for example, by using a disc recovery utility.
Suppose, for example, the file you're erasing contains production passwords and needs to be deleted immediately after the present operation is complete.
Zero-filling the file once you've finished using it helps ensure the sensitive information is destroyed.
On a recent project we used the following code, which works well for small text files. It overwrites the existing contents with lines of zeros.
import os
def destroy_password_file(password_filename):
with open(password_filename) as password_file:
text = password_file.read()
lentext = len(text)
zero_fill_line_length = 40
zero_fill = ['0' * zero_fill_line_length
for _
in range(lentext // zero_fill_line_length + 1)]
zero_fill = os.linesep.join(zero_fill)
with open(password_filename, 'w') as password_file:
password_file.write(zero_fill)
Note that zero-filling will not guarantee your security. If you're really concerned, you'd be best to zero-fill and use a specialist utility like File Shredder or CCleaner to wipe clean the 'empty' space on your drive.
You have to overwrite the file. In C++:
#include <fstream>
std::ofstream("test.txt", std::ios::out).close();
You can also use this (based on a few of the above answers):
file = open('filename.txt', 'w')
file.close()
of course this is a really bad way to clear a file because it requires so many lines of code, but I just wrote this to show you that it can be done in this method too.
happy coding!
You cannot "erase" from a file in-place unless you need to erase the end. Either be content with an overwrite of an "empty" value, or read the parts of the file you care about and write it to another file.
Assigning the file pointer to null inside your program will just get rid of that reference to the file. The file's still there. I think the remove() function in the c stdio.h is what you're looking for there. Not sure about Python.
Since text files are sequential, you can't directly erase data on them. Your options are:
The most common way is to create a new file. Read from the original file and write everything on the new file, except the part you want to erase. When all the file has been written, delete the old file and rename the new file so it has the original name.
You can also truncate and rewrite the entire file from the point you want to change onwards. Seek to point you want to change, and read the rest of file to memory. Seek back to the same point, truncate the file, and write back the contents without the part you want to erase.
Another simple option is to overwrite the data with another data of same length. For that, seek to the exact position and write the new data. The limitation is that it must have exact same length.
Look at the seek/truncate function/method to implement any of the ideas above. Both Python and C have those functions.
This is my method:
open the file using r+ mode
read current data from the file using file.read()
move the pointer to the first line using file.seek(0)
remove old data from the file using file.truncate(0)
write new content and then content that we saved using file.read()
So full code will look like this:
with open(file_name, 'r+') as file:
old_data = file.read()
file.seek(0)
file.truncate(0)
file.write('my new content\n')
file.write(old_data)
Because we are using with open, file will automatically close.
The last line of my file is:
29-dez,40,
How can I modify that line so that it reads:
29-Dez,40,90,100,50
Note: I don't want to write a new line. I want to take the same line and put new values after 29-Dez,40,
I'm new at python. I'm having a lot of trouble manipulating files and for me every example I look at seems difficult.
Unless the file is huge, you'll probably find it easier to read the entire file into a data structure (which might just be a list of lines), and then modify the data structure in memory, and finally write it back to the file.
On the other hand maybe your file is really huge - multiple GBs at least. In which case: the last line is probably terminated with a new line character, if you seek to that position you can overwrite it with the new text at the end of the last line.
So perhaps:
f = open("foo.file", "wb")
f.seek(-len(os.linesep), os.SEEK_END)
f.write("new text at end of last line" + os.linesep)
f.close()
(Modulo line endings on different platforms)
To expand on what Doug said, in order to read the file contents into a data structure you can use the readlines() method of the file object.
The below code sample reads the file into a list of "lines", edits the last line, then writes it back out to the file:
#!/usr/bin/python
MYFILE="file.txt"
# read the file into a list of lines
lines = open(MYFILE, 'r').readlines()
# now edit the last line of the list of lines
new_last_line = (lines[-1].rstrip() + ",90,100,50")
lines[-1] = new_last_line
# now write the modified list back out to the file
open(MYFILE, 'w').writelines(lines)
If the file is very large then this approach will not work well, because this reads all the file lines into memory each time and writes them back out to the file, which is very inefficient. For a small file however this will work fine.
Don't work with files directly, make a data structure that fits your needs in form of a class and make read from/write to file methods.
I recently wrote a script to do something very similar to this. It would traverse a project, find all module dependencies and add any missing import statements. I won't clutter this post up with the entire script, but I'll show how I went about modifying my files.
import os
from mmap import mmap
def insert_import(filename, text):
if len(text) < 1:
return
f = open(filename, 'r+')
m = mmap(f.fileno(), os.path.getsize(filename))
origSize = m.size()
m.resize(origSize + len(text))
pos = 0
while True:
l = m.readline()
if l.startswith(('import', 'from')):
continue
else:
pos = m.tell() - len(l)
break
m[pos+len(text):] = m[pos:origSize]
m[pos:pos+len(text)] = text
m.close()
f.close()
Summary: This snippet takes a filename and a blob of text to insert. It finds the last import statement already present, and sticks the text in at that location.
The part I suggest paying most attention to is the use of mmap. It lets you work with files in the same manner you may work with a string. Very handy.