I am currently doing a project to extract the contents of a PDF. The code runs smoothly and I am able to extract the text but the extracted text are not in the right order. The code extracts the text in a weird way. The order of the text is all over the place. It does not go from top to bottom and is really confusing.
I looked up online but there was very little help on how to order the text extraction. Most tutorials came up with the same result. For reference, this is the PDF that I am currently testing it on (page 5): https://www.pidm.gov.my/PIDM/files/13/134b5c79-5319-4199-ac68-99f62aca6047.pdf
import PyPDF2
with open('pdftest2.pdf', 'rb') as pdfTest:
reader = PyPDF2.PdfFileReader(pdfTest)
page5 = reader.getPage(4)
text = page5.extractText()
print(text)
The extracted text would always start with the footer of the page and then go its way from bottom to top. I noticed in the next page it would start from top to bottom but only for a few certain sentences. Then it would extract text from a different position of the page instead of continuing from where it left off.
All of the text does get extracted but the order of which it is extracted is all over the place. Is there any solution for this problem?
I had to deal with a problem that was similar and it turned out that the module pdfplumber worked better than PyPDF. I guess it depends on the document itself, you should try.
Otherwise another answer to your problem would be to treat the PDFs as images with the pdf2image module and extract the text within them using pytesseract. However it might not be perfect method as the pdf2image method convert_from_path can take quite a long time to run.
I drop some code down here if you are interested.
First of all make sure you install all necessary depedencies as well as Tesseract and ImageMagik. You can find any information regarding install on the website. If you are working with windows there's a good Medium article here.
To convert PDFs to images using pdf2image:
Don't forget to add your poppler path if you are working on windows. It should look like something like that r'C:\<your_path>\poppler-21.02.0\Library\bin'
def pdftoimg(fic,output_folder, poppler_path):
# Store all the pages of the PDF in a variable
pages = convert_from_path(fic, dpi=500,output_folder=output_folder,thread_count=9, poppler_path=poppler_path)
image_counter = 0
# Iterate through all the pages stored above
for page in pages:
filename = "page_"+str(image_counter)+".jpg"
page.save(output_folder+filename, 'JPEG')
image_counter = image_counter + 1
for i in os.listdir(output_folder):
if i.endswith('.ppm'):
os.remove(output_folder+i)
To extract text from the image:
Your tesseract path is going to be something like that: r'C:\Program Files\Tesseract-OCR\tesseract.exe'
def imgtotext(img, tesseract_path):
# Recognize the text as string in image using pytesserct
pytesseract.pytesseract.tesseract_cmd = tesseract_path
text = str(((pytesseract.image_to_string(Image.open(img)))))
text = text.replace('-\n', '')
return text
I recently started using PyMuPDF. It’s licensing is a little confusing but some of their methods have ways to correctly sort the text as it naturally appears (left to right, top to bottom). Something like page.get_text(“words”, sort=True) is all it takes.
I have a .docx with a mix of text and images (some duplicates and some not). I want the script to ultimately return only the images that appear at least twice in the word document (i.e. images that appear once can be discarded).
I've tried using manual extraction using Microsoft word itself and docx2txt (shown below) and they extract all images within the word document but it auto-deletes duplicate images (i.e. only one copy of each unique image ends up in the new folder). So in a sense, it's going counter to what I'm eventually aiming to do. Is there any way to solve this or is there a different approach that's better?
import docx2txt
text = docx2txt.process(r"C:\Users\name\Documents\document_with_image.docx", r'C:\Users\name\Documents\folder_of_choice')
Thanks so much!
you can convert the word document to latex and then check for duplicate images from there. You will need to install the library pypandoc using the command:-
pip install pypandoc
output = pypandoc.convert_file(path, 'latex')
When converted to latex each image file will be preceded by '\includegraphics'
tempvar = docx2txt.process(path,impath)
Now you can scan the directory "impath" where the images have been put to generate a list of the names of the images.
image_li={}
for entry in os.scandir(impath):
if (entry.path.endswith(".png")):
templ=entry.path.split("\\")
templ2=templ[-1]
templ3=templ2.split(".")
im_name=str(templ3[0])
image_li[im_name]=0
Now you have successfully initialized a dictionary with keys as image names and values as 0.
Now iterate through the latex and whenever you encounter the image name just increment the value by 1.
At the end of parsing the whole latex file, check the image names which have values associated less than 2 and delete them.
output_list=output.split('\includegraphics')
for out in output_list:
for imn in image_li.keys():
if imn in out:
image_li[imn]+=1
for entry in os.scandir(impath):
if (entry.path.endswith(".png")):
templ=entry.path.split("\\")
templ2=templ[-1]
templ3=templ2.split(".")
im_name=str(templ3[0])
if image_li[im_name]<=1:
os.remove(entry)
Please mark the answer as approved answer if it helped you :)
I've searched the documentation for python-docx and other packages, as well as stack-overflow, but could not find how to remove all images from docx files with python.
My exact use-case: I need to convert hundreds of word documents to "draft" format to be viewed by clients. Those drafts should be identical the original documents but all the images must be deleted / redacted from them.
Sorry for not including an example of things I tried, what I have tried is hours of research that didn't give any info. I found this question on how to extract images from word files, but that doesn't delete them from the actual document: Extract pictures from Word and Excel with Python
From there and other sources I've found out that docx files could be read as simple zip files, I don't know if that means that it's possible to "re-zip" without the images without affecting the integrity of the docx file (edit: simply deleting the images works, but prevents python-docx from continuing to work with this file because of missing references to images), but thought this might be a path to a solution.
Any ideas?
If your goal is to redact images maybe this code I used for a similar usecase could be useful:
import sys
import zipfile
from PIL import Image, ImageFilter
import io
blur = ImageFilter.GaussianBlur(40)
def redact_images(filename):
outfile = filename.replace(".docx", "_redacted.docx")
with zipfile.ZipFile(filename) as inzip:
with zipfile.ZipFile(outfile, "w") as outzip:
for info in inzip.infolist():
name = info.filename
print(info)
content = inzip.read(info)
if name.endswith((".png", ".jpeg", ".gif")):
fmt = name.split(".")[-1]
img = Image.open(io.BytesIO(content))
img = img.convert().filter(blur)
outb = io.BytesIO()
img.save(outb, fmt)
content = outb.getvalue()
info.file_size = len(content)
info.CRC = zipfile.crc32(content)
outzip.writestr(info, content)
Here I used PIL to blur images in some files, but instead of the blur filter any other suitable operation could be used. This worked quite nicely for my usecase.
I don't think it's currently implemented in python-docx.
Pictures in the Word Object Model are defined as either floating shapes or inline shapes. The docx documentation states that it only supports inline shapes.
The Word Object Model for Inline Shapes supports a Delete() method, which should be accessible. However, it is not listed in the examples of InlineShapes and there is also a similar method for paragraphs. For paragraphs, there is an open feature request to add this functionality - which dates back to 2014! If it's not added to paragraphs it won't be available for InlineShapes as they are implemented as discrete paragraphs.
You could do this with win32com if you have a machine with Word and Python installed.
This would allow you to call the Word Object Model directly, giving you access to the Delete() method. In fact you could probably cheat - rather than scrolling through the document to get each image, you can call Find and Replace to clear the image. This SO question talks about win32com find and replace:
import win32com.client
from os import getcwd, listdir
docs = [i for i in listdir('.') if i[-3:]=='doc' or i[-4:]=='docx'] #All Word file
FromTo = {"First Name":"John",
"Last Name":"Smith"} #You can insert as many as you want
word = win32com.client.DispatchEx("Word.Application")
word.Visible = True #Keep comment after tests
word.DisplayAlerts = False
for doc in docs:
word.Documents.Open('{}\\{}'.format(getcwd(), doc))
for From in FromTo.keys():
word.Selection.Find.Text = From
word.Selection.Find.Replacement.Text = FromTo[From]
word.Selection.Find.Execute(Replace=2, Forward=True) #You made the mistake here=> Replace must be 2
name = doc.rsplit('.',1)[0]
ext = doc.rsplit('.',1)[1]
word.ActiveDocument.SaveAs('{}\\{}_2.{}'.format(getcwd(), name, ext))
word.Quit() # releases Word object from memory
In this case since we want images, we would need to use the short-code ^g as the find.Text and blank as the replacement.
word.Selection.Find
find.Text = "^g"
find.Replacement.Text = ""
find.Execute(Replace=1, Forward=True)
I don't know about this library, but looking through the documentation I found this section about images. It mentiones that it is currently not possible to insert images other than inline. If that is what you currently have in your documents, I assume you can also retrieve these by looking in the Document object and then remove them?
The Document is explained here.
Although not a duplicate, you might also want to look at this question's answer where user "scanny" explains how he finds images using the library.
How do I find an existing image in MS document table and replace it with a new one? With this code am able to find table cell/location of an image and add new image, but it doesn't replace the old image.
from docx import Document
from docx.shared import Inches
doc = docx.Document('myWordDoc.docx')
tables = doc.tables
# Find existing image and remove it then add new image
img = tables[0].rows[0].cells[0].add_paragraph()
r = img.add_run()
r.add_picture('/tmp/foo.jpg', width=Inches(2.5))
Is this possible with python-docx module or any other module?
I replaced your 3 last lines of code:
img = tables[0].rows[0].cells[0].add_paragraph()
r = img.add_run()
r.add_picture('/tmp/foo.jpg', width=Inches(2.5))
With something like this
#This seams to clear the content in my cell
tables[0].rows[0].cells[0]._element.clear_content()
#Then when the image is inserted to the cell it is not placed one linefeed down.
img = tables[0].rows[0].cells[0].add_paragraph().add_run().add_picture('Image.png', width=Inches(0.4))
It seams to work for me, but a big thanks for your question it put me on the right track, It was not only hard to remove the image, when I added the new image it was a line feed down. But my code, that is a bit compact fixed both of the problems.
Thanks!
Perhaps try using https://github.com/khanfarhan10/PythonCertificateGenerator/blob/main/ImageReplacer.py and suit the code to yourself!
All file manipulations are performed using python ZipFile.
This question already has answers here:
How to extract text from a PDF file?
(33 answers)
Closed 2 months ago.
Problem
I'm trying to determine what type a document is (e.g. pleading, correspondence, subpoena, etc) by searching through its text, preferably using python. All PDFs are searchable, but I haven't found a solution to parsing it with python and applying a script to search it (short of converting it to a text file first, but that could be resource-intensive for n documents).
What I've done so far
I've looked into pypdf, pdfminer, adobe pdf documentation, and any questions here I could find (though none seemed to directly solve this issue). PDFminer seems to have the most potential, but after reading through the documentation I'm not even sure where to begin.
Is there a simple, effective method for reading PDF text, either by page, line, or the entire document? Or any other workarounds?
This is called PDF mining, and is very hard because:
PDF is a document format designed to be printed, not to be parsed. Inside a PDF document,
text is in no particular order (unless order is important for printing), most of the time
the original text structure is lost (letters may not be grouped
as words and words may not be grouped in sentences, and the order they are placed in
the paper is often random).
There are tons of software generating PDFs, many are defective.
Tools like PDFminer use heuristics to group letters and words again based on their position in the page. I agree, the interface is pretty low level, but it makes more sense when you know
what problem they are trying to solve (in the end, what matters is choosing how close from the neighbors a letter/word/line has to be in order to be considered part of a paragraph).
An expensive alternative (in terms of time/computer power) is generating images for each page and feeding them to OCR, may be worth a try if you have a very good OCR.
So my answer is no, there is no such thing as a simple, effective method for extracting text from PDF files - if your documents have a known structure, you can fine-tune the rules and get good results, but it is always a gambling.
I would really like to be proven wrong.
[update]
The answer has not changed but recently I was involved with two projects: one of them is using computer vision in order to extract data from scanned hospital forms. The other extracts data from court records. What I learned is:
Computer vision is at reach of mere mortals in 2018. If you have a good sample of already classified documents you can use OpenCV or SciKit-Image in order to extract features and train a machine learning classifier to determine what type a document is.
If the PDF you are analyzing is "searchable", you can get very far extracting all the text using a software like pdftotext and a Bayesian filter (same kind of algorithm used to classify SPAM).
So there is no reliable and effective method for extracting text from PDF files but you may not need one in order to solve the problem at hand (document type classification).
I am totally a green hand, but this script works for me:
# import packages
import PyPDF2
import re
# open the pdf file
reader = PyPDF2.PdfReader("test.pdf")
# get number of pages
num_pages = len(reader.pages)
# define key terms
string = "Social"
# extract text and do the search
for page in reader.pages:
rext = page.extract_text()
# print(text)
res_search = re.search(string, text)
print(res_search)
I've written extensive systems for the company I work for to convert PDF's into data for processing (invoices, settlements, scanned tickets, etc.), and #Paulo Scardine is correct--there is no completely reliable and easy way to do this. That said, the fastest, most reliable, and least-intensive way is to use pdftotext, part of the xpdf set of tools. This tool will quickly convert searchable PDF's to a text file, which you can read and parse with Python. Hint: Use the -layout argument. And by the way, not all PDF's are searchable, only those that contain text. Some PDF's contain only images with no text at all.
I recently started using ScraperWiki to do what you described.
Here's an example of using ScraperWiki to extract PDF data.
The scraperwiki.pdftoxml() function returns an XML structure.
You can then use BeautifulSoup to parse that into a navigatable tree.
Here's my code for -
import scraperwiki, urllib2
from bs4 import BeautifulSoup
def send_Request(url):
#Get content, regardless of whether an HTML, XML or PDF file
pageContent = urllib2.urlopen(url)
return pageContent
def process_PDF(fileLocation):
#Use this to get PDF, covert to XML
pdfToProcess = send_Request(fileLocation)
pdfToObject = scraperwiki.pdftoxml(pdfToProcess.read())
return pdfToObject
def parse_HTML_tree(contentToParse):
#returns a navigatibale tree, which you can iterate through
soup = BeautifulSoup(contentToParse)
return soup
pdf = process_PDF('http://greenteapress.com/thinkstats/thinkstats.pdf')
pdfToSoup = parse_HTML_tree(pdf)
soupToArray = pdfToSoup.findAll('text')
for line in soupToArray:
print line
This code is going to print a whole, big ugly pile of <text> tags.
Each page is separated with a </page>, if that's any consolation.
If you want the content inside the <text> tags, which might include headings wrapped in <b> for example, use line.contents
If you only want each line of text, not including tags, use line.getText()
It's messy, and painful, but this will work for searchable PDF docs. So far I've found this to be accurate, but painful.
Here is the solution that I found it comfortable for this issue. In the text variable you get the text from PDF in order to search in it. But I have kept also the idea of spiting the text in keywords as I found on this website: https://medium.com/#rqaiserr/how-to-convert-pdfs-into-searchable-key-words-with-python-85aab86c544f from were I took this solution, although making nltk was not very straightforward, it might be useful for further purposes:
import PyPDF2
import textract
from nltk.tokenize import word_tokenize
from nltk.corpus import stopwords
def searchInPDF(filename, key):
occurrences = 0
pdfFileObj = open(filename,'rb')
pdfReader = PyPDF2.PdfFileReader(pdfFileObj)
num_pages = pdfReader.numPages
count = 0
text = ""
while count < num_pages:
pageObj = pdfReader.getPage(count)
count +=1
text += pageObj.extractText()
if text != "":
text = text
else:
text = textract.process(filename, method='tesseract', language='eng')
tokens = word_tokenize(text)
punctuation = ['(',')',';',':','[',']',',']
stop_words = stopwords.words('english')
keywords = [word for word in tokens if not word in stop_words and not word in punctuation]
for k in keywords:
if key == k: occurrences+=1
return occurrences
pdf_filename = '/home/florin/Downloads/python.pdf'
search_for = 'string'
print searchInPDF (pdf_filename,search_for)
I agree with #Paulo PDF data-mining is a huge pain. But you might have success with pdftotext which is part of the Xpdf suite freely available here:
http://www.foolabs.com/xpdf/download.html
This should be sufficient for your purpose if you are just looking for single keywords.
pdftotext is a command line utility, but very straightforward to use. It will give you text files, which you may find easier to work with.
If you are on bash, There is a nice tool called pdfgrep,
Since, This is in apt repository, You can install this with:
sudo apt install pdfgrep
It had served my requirements well.
Trying to pick through PDFs for keywords is not an easy thing to do. I tried to use the pdfminer library with very limited success. It’s basically because PDFs are pandemonium incarnate when it comes to structure. Everything in a PDF can stand on its own or be a part of a horizontal or vertical section, backwards or forwards. Pdfminer was having issues translating one page, not recognizing the font, so I tried another direction — optical character recognition of the document. That worked out almost perfectly.
Wand converts all the separate pages in the PDF into image blobs, then you run OCR over the image blobs. What I have as a BytesIO object is the content of the PDF file from the web request. BytesIO is a streaming object that simulates a file load as if the object was coming off of disk, which wand requires as the file parameter. This allows you to just take the data in memory instead of having to save the file to disk first and then load it.
Here’s a very basic code block that should be able to get you going. I can envision various functions that would loop through different URL / files, different keyword searches for each file, and different actions to take, possibly even per keyword and file.
# http://docs.wand-py.org/en/0.5.9/
# http://www.imagemagick.org/script/formats.php
# brew install freetype imagemagick
# brew install PIL
# brew install tesseract
# pip3 install wand
# pip3 install pyocr
import pyocr.builders
import requests
from io import BytesIO
from PIL import Image as PI
from wand.image import Image
if __name__ == '__main__':
pdf_url = 'https://www.vbgov.com/government/departments/city-clerk/city-council/Documents/CurrentBriefAgenda.pdf'
req = requests.get(pdf_url)
content_type = req.headers['Content-Type']
modified_date = req.headers['Last-Modified']
content_buffer = BytesIO(req.content)
search_text = 'tourism investment program'
if content_type == 'application/pdf':
tool = pyocr.get_available_tools()[0]
lang = 'eng' if tool.get_available_languages().index('eng') >= 0 else None
image_pdf = Image(file=content_buffer, format='pdf', resolution=600)
image_jpeg = image_pdf.convert('jpeg')
for img in image_jpeg.sequence:
img_page = Image(image=img)
txt = tool.image_to_string(
PI.open(BytesIO(img_page.make_blob('jpeg'))),
lang=lang,
builder=pyocr.builders.TextBuilder()
)
if search_text in txt.lower():
print('Alert! {} {} {}'.format(search_text, txt.lower().find(search_text),
modified_date))
req.close()
This answer follows #Emma Yu's:
If you want to print out all the matches of a string pattern on every page.
(Note that Emma's code prints a match per page):
import PyPDF2
import re
pattern = input("Enter string pattern to search: ")
fileName = input("Enter file path and name: ")
object = PyPDF2.PdfFileReader(fileName)
numPages = object.getNumPages()
for i in range(0, numPages):
pageObj = object.getPage(i)
text = pageObj.extractText()
for match in re.finditer(pattern, text):
print(f'Page no: {i} | Match: {match}')
A version using PyMuPDF. I find it to be more robust than PyPDF2.
import fitz
import re
# load document
doc = fitz.open(filename)
# define keyterms
String = "hours"
# get text, search for string and print count on page.
for page in doc:
text = ''
text += page.getText()
print(f'count on page {page.number +1} is: {len(re.findall(String, text))}')
Example with pdfminer.six
from pdfminer import high_level
with open('file.pdf', 'rb') as f:
text = high_level.extract_text(f)
print(text)
Compared to PyPDF2, it can work with cyrillic