We Keep Coding

nonstop server client connection[Python]

I want to create a server-client connection that the client can always be connected to the server. How can I do it? Please help me. when I was trying, this error occurred.
"ConnectionResetError: [WinError 10054] An existing connection was forcibly closed by the remote host"
- code -
server:
import socket
try:
s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((host,port))
s.listen(1)
conn, addr=s.accept()
while True:
conn.send(("Test message").encode())
print((conn.recv(1024)).decode())
except Exception as error:
print(str(error))
client:
import socket
try:
s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((server_host,port))
while True:
print((s.recv(1024)).decode())
s.send(("Test message").encode())
except Exception as error:
print(str(error))

Some reasons cause this error message:
Server reused the connection because it has been idle for too long.
May be Client IP address or Port number not same as Server.
The network between server and client may be temporarily going down.
Server not started at first.
Your code seems to be OK. Did you run the Server at first time then client? Please make sure it. The below code fully tested on my computer.
Server:
import socket
HOST = '127.0.0.1' # (localhost)
PORT = 65432 # Port to listen on
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.bind((HOST, PORT))
s.listen()
conn, addr = s.accept()
while True:
data = conn.recv(1024).decode()
if not data:
break
conn.send(data.encode())
Client
import socket
HOST = '127.0.0.1' # Server's IP address
PORT = 65432 # Server's port
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.connect((HOST, PORT))
while True:
s.send(("Hi server, send me back this message please").encode())
data = s.recv(1024).decode()
print('(From Server) :', repr(data))
Note: Run the Server first then Client.
Output:

Getting error non-blocking (10035) error when trying to connect to server

I am trying to simply send a list from one computer to another.
I have my server set up on one computer, where the IP address is 192.168.0.101
The code for the server:
import socket
import pickle
import time
import errno
HEADERSIZE = 20
HOST = socket.gethostbyname(socket.gethostname())
PORT = 65432
print(HOST)
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((HOST, PORT))
s.listen(10)
while True:
conn, adrs = s.accept()
print(f"Connection with {adrs} has been established")
conn.setblocking(1)
try:
data = conn.recv(HEADERSIZE)
if not data:
print("connection closed")
conn.close()
break
else:
print("Received %d bytes: '%s'" % (len(data), pickle.loads(data)))
except socket.error as e:
if e.args[0] == errno.EWOULDBLOCK:
print('EWOULDBLOCK')
time.sleep(1) # short delay, no tight loops
else:
print(e)
break
The client is on another computer. The code:
import socket
import pickle
HOST = '192.168.0.101'
PORT = 65432
def send_data(list):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.settimeout(10)
print(".")
print(s.connect_ex((HOST, PORT)))
print(".")
data = pickle.dumps(list)
print(len(data))
s.send(data)
s.close()
send_data([1,1,1])
The outputted error number of connect_ex is 10035. I read a lot about the error, but all I found was about the server side. To me, it looks like the problem is with the client and that it is unable to make a connection to 192.168.0.101. But then, I don't understand why the error I get is about non-blocking.
What is it that I am doing wrong that I am unable to send data?

First of all, how user207421 suggested, change the timeout to a longer duration.
Also, as stated here Socket Programming in Python raising error socket.error:< [Errno 10060] A connection attempt failed I was trying to run my server and connect to a private IP address.
The fix is: on the server side, in the s.bind, to leave the host part empty
HOST = ''
PORT = 65432
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((HOST, PORT))
And on the client side, use the public IP of the PC where the server is running (I got it from ip4.me)
HOST = 'THE PUBLIC IP' #not going to write it
PORT = 65432
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((host, PORT))

Python Socket Programming - ConnectionRefusedError: [WinError 10061] No connection could be made because the target machine actively refused it

I'm doing an assignment regarding socket programming in python using a client and server. I'm currently on windows 10. Before getting into the little details of the assignment, I've been trying to simply connect the server and client.
Every time I try to run the client file, I would get this error
File "tcpclient.py", line 9, in <module>
s.connect((host, port))
ConnectionRefusedError: [WinError 10061] No connection could be made because the target machine actively refused it
I have opened the firewall ports and still nothing. I've tried replacing host with '', 0.0.0.0, socket.gethostname() in both the client and server file but the error still persists. I've even tried different port numbers but it made no difference. I've tried running this code on Ubuntu and Max and I get the same error - connection refused. I've been researching for many solutions but I still have yet to find one that works. Any help would be greatly appreciated!
Note: this code was taken online but it's essentially the basis of what I need to accomplish.
tcpclient.py
import socket
host = '127.0.0.1'
port = 80
buffer_size = 1024
text = "Hello, World!"
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((host, port))
s.send(text)
data = s.recv(buffer_size)
s.close()
print("received data:", data)
tcpserver.py
import socket
host = '127.0.0.1'
port = 80
buffer_size = 20
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((host, port))
s.listen(1)
conn, addr = s.accept()
print 'Connection address:', addr
while 1:
data = conn.recv(buffer_size)
if not data: break
print("received data:", data)
conn.send(data) # echo
conn.close()

Just use a different port. Both the client and server should have the same port and host if not it won't work. Make sure to run the server before the client script.

For client.py
import socket
host = '127.0.0.1'
port = 9879
buffer_size = 1024
text = "Hello, World!"
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((host, port))
text = text.encode('utf-8')
s.send(text)
data = s.recv(buffer_size)
s.close()
print("received data:", data)
For server.py
import socket
mysocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
buffer_size = 1024
text = "Hello, World!"
mysocket.bind(('127.0.0.1', 9879))
mysocket.listen(5)
(client, (ip,port)) = mysocket.accept()
print(client, port)
client.send(b"knock knock knock, I'm the server")
data = client.recv(buffer_size)
print(data.decode())
mysocket.close()
Just change the port number and it will work and if you are in python3 then you will have to encode and decode as socket recieves and sends only binary strings.

I have succeed in my server!
My server python script is below:
import socket
host='0.0.0.0'
port=2345
s=socket.socket()
s.bind((host,port))
s.listen(2)
while True:
conn,addr=s.accept()
print("Connected by",addr)
data=conn.recv(1024)
print("received data:",data)
conn.send(data)
conn.close()
My Client python script is below:
import socket
s=socket.socket()
host="xx.xx.xx.xx" #This is your Server IP!
port=2345
s.connect((host,port))
s.send(b"hello")
rece=s.recv(1024)
print("Received",rece)
s.close()
There is two points needed to be careful in the script:
1.The host of the Server must is
'0.0.0.0'
So that the python script could user all interfaces in the server
2.I have find the question's error through the prompt:
TypeError: a bytes-like object is required, not 'str'
It means every string message in the 'send' method need to convert to 'bytes-like object',So the correct is
s.send(b"hello")
It is important that this is b'hello' not is 'hello'

I was following a tutorial that used threading to start the server. Once I removed the threading then I was able to connect to it.

OSError: [Errno 99] Cannot assign requested address - py

I just copied this code for a client/server example:
http://www.bogotobogo.com/python/python_network_programming_server_client.php
and when I run the code I get this error:
OSError: [Errno 99] Cannot assign requested address
Server:
# server.py
import socket
import time
# create a socket object
serversocket = socket.socket(
socket.AF_INET, socket.SOCK_STREAM)
# get local machine name
host = socket.gethostname()
port = 9999
# bind to the port
serversocket.bind((host, port))
# queue up to 5 requests
serversocket.listen(5)
while True:
# establish a connection
clientsocket,addr = serversocket.accept()
print("Got a connection from %s" % str(addr))
currentTime = time.ctime(time.time()) + "\r\n"
clientsocket.send(currentTime.encode('ascii'))
clientsocket.close()
Client:
# client.py
import socket
# create a socket object
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
# get local machine name
host = socket.gethostname()
port = 9999
# connection to hostname on the port.
s.connect((host, port))
# Receive no more than 1024 bytes
tm = s.recv(1024)
s.close()
print("The time got from the server is %s" % tm.decode('ascii'))

Replace host = socket.gethostname() with host = '127.0.0.1' and it should work.
Check this
Hope this wil help :)

How to connect python socket client side to server socket with url?

I am trying to create a client to connect to a server with given url address.
I used this way
host_ip = socket.gethostbyname('HOST_NAME')
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.bind(('127.0.0.1', 0))
sock.connect((host_ip, 8080))
but it printed the following error
OSError: [Errno 22] Invalid argument
Can someone explain me why is wrong and give me a solution?

You don't have to bind your socket, this is done server-side.
Here's the example code from the documentation for socket :
import socket
HOST = 'your-url.net' # The remote host
PORT = 8080 # The same port as used by the server
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.connect((HOST, PORT))
s.sendall(b'Hello, world')
data = s.recv(1024)
print('Received', repr(data))
This is a simple snippet, which connects to the server, sends some data, and prints the response.