We Keep Coding

How to dim background when using qmessagebox?

I want to set the background in dim mode, when a QMessagebox is popped up.
Currently, I have tried to use a simple QMesssagebox, but the background shows as normal display, when it pops up.
The image for 1st page is as follow
When go to next slide is pushed, it goes to next index as follow
When going back to 1st index, the back button is pushed which pops up the messagebox as follow
However, the mainwindow seems to have no effect on its focus.
Therefore, what would I need to do to make it dimmer than the focused messagebox.
How can I do this? Any suggestions?
EDIT
import sys
from PyQt5 import uic
from PyQt5.QtWidgets import QApplication, QMainWindow, QMessageBox
class MainWindow(QMainWindow):
def __init__(self):
super().__init__()
self.ui = uic.loadUi("message.ui",self)
self.notification = QMessageBox()
self.ui.next_slide.clicked.connect(self.second_index)
self.ui.go_back.clicked.connect(self.alert_msg)
self.show()
def home(self):
self.ui.stackedWidget.setCurrentIndex(0)
def second_index(self):
self.ui.stackedWidget.setCurrentIndex(1)
def alert_msg(self):
self.notification.setWindowTitle("Exiting")
self.notification.setText("Are you sure, you want to exit")
self.notification.setIcon(QMessageBox.Critical)
self.notification.setStandardButtons(QMessageBox.Yes | QMessageBox.No)
self.back = self.notification.exec_()
if self.back == QMessageBox.Yes:
self.home()
else:
pass
if __name__ == "__main__":
app=QApplication(sys.argv)
mainwindow=MainWindow()
app.exec_()

You can create a custom widget that is a direct child of the window that has to be "dimmed", ensure that it always has the same size as that window, and just paint it with the selected color:
class Dimmer(QWidget):
def __init__(self, parent):
parent = parent.window()
super().__init__(parent)
parent.installEventFilter(self)
self.setAttribute(Qt.WA_DeleteOnClose)
self.adaptToParent()
self.show()
def adaptToParent(self):
self.setGeometry(self.parent().rect())
def eventFilter(self, obj, event):
if event.type() == event.Resize:
self.adaptToParent()
return super().eventFilter(obj, event)
def paintEvent(self, event):
qp = QPainter(self)
qp.fillRect(self.rect(), QColor(127, 127, 127, 127))
class MainWindow(QMainWindow):
# ...
def alert_msg(self):
dimmer = Dimmer(self)
# ...
self.back = self.notification.exec_()
dimmer.close()
Note that, unless you plan to reuse the "dim widget", it must be destroyed either by calling close() as done above (see the WA_DeleteOnClose flag) or using deleteLater(). Hiding it will not be enough.

Overriding QCompleter popup position

There have been similar questions asked about overriding the QCompleter popup position but i'll still not found a working solution. I simply want to move the popup down around 5px (I have some specific styling requirements)
I've tried subclassing a QListView and using that as my popup using setPopup(). I then override the showEvent and move the popup down in Y. I also do this on the resizeEvent since I believe this is triggered when items are filtered and the popup resizes. However this doesn't work.. I then used a singleshot timer to trigger the move after 1ms. This does kind of work but it seems quite inconsistent - the first time it shows is different to subsequent times or resizing.
Below is my latest attempt (trying to hack it by counting the number of popups..), hopefully someone can show me what i'm doing wrong or a better solution
import sys
import os
from PySide2 import QtCore, QtWidgets, QtGui
class QPopup(QtWidgets.QListView):
def __init__(self, parent=None):
super(QPopup, self).__init__(parent)
self.popups = 0
def offset(self):
y = 3 if self.popups < 2 else 7
print('y: {}'.format(y))
self.move(self.pos().x(), self.pos().y() + y)
self.popups += 1
def showEvent(self, event):
print('show')
# self.offset()
QtCore.QTimer.singleShot(1, self.offset)
def resizeEvent(self, event):
print('resize')
# self.offset()
QtCore.QTimer.singleShot(1, self.offset)
class MyDialog(QtWidgets.QDialog):
def __init__(self, parent=None):
super(MyDialog, self).__init__(parent)
self.create_widgets()
self.create_layout()
self.create_connections()
def create_widgets(self):
self.le = QtWidgets.QLineEdit('')
self.completer = QtWidgets.QCompleter(self)
self.completer.setCaseSensitivity(QtCore.Qt.CaseInsensitive)
self.completer.setCompletionMode(QtWidgets.QCompleter.PopupCompletion)
self.completer.setMaxVisibleItems(10)
self.completer.setFilterMode(QtCore.Qt.MatchContains)
self.completer.setPopup(QPopup())
popup = QPopup(self)
self.completer.setPopup(popup)
self.model = QtCore.QStringListModel()
self.completer.setModel(self.model)
self.le.setCompleter(self.completer)
self.completer.model().setStringList(['one','two','three'])
def create_layout(self):
main_layout = QtWidgets.QVBoxLayout(self)
main_layout.addWidget(self.le)
def create_connections(self):
pass
if __name__ == "__main__":
app = QtWidgets.QApplication(sys.argv)
my_dialog = MyDialog()
my_dialog.show() # Show the UI
sys.exit(app.exec_())

One solution could be to make a subclass of QLineEdit and override keyPressEvent to display the popup with an offset:
PySide2.QtWidgets.QCompleter.complete([rect=QRect()])
For PopupCompletion and QCompletion::UnfilteredPopupCompletion modes, calling this function displays the popup displaying the current completions. By default, if rect is not specified, the popup is displayed on the bottom of the widget() . If rect is specified the popup is displayed on the left edge of the rectangle.
see doc.qt.io -> QCompleter.complete.
Complete, self-contained example
The rect is calculated based on the y-position of the cursor rect. The height of the popup window is not changed. The width is adjusted to the width of the ZLineEdit widget.
rect = QtCore.QRect(0,
self.cursorRect().y() + 4,
self.width(),
self.completer().widget().height())
Your code, slightly modified using the points mentioned above, could look like this:
import sys
from PySide2 import QtCore, QtWidgets
from PySide2.QtWidgets import QLineEdit, QDialog, QCompleter
class ZLineEdit(QLineEdit):
def __init__(self, string, parent=None):
super().__init__(string, parent)
def keyPressEvent(self, event):
super().keyPressEvent(event)
if len(self.text()) > 0:
rect = QtCore.QRect(0,
self.cursorRect().y() + 4,
self.width(),
self.completer().widget().height())
self.completer().complete(rect)
class MyDialog(QDialog):
def __init__(self, parent=None):
super().__init__(parent)
self.le = ZLineEdit('')
autoList = ['one', 'two', 'three']
self.completer = QCompleter(autoList, self)
self.setup_widgets()
self.create_layout()
self.create_connections()
def setup_widgets(self):
self.completer.setCaseSensitivity(QtCore.Qt.CaseInsensitive)
self.completer.setCompletionMode(QtWidgets.QCompleter.PopupCompletion)
self.completer.setMaxVisibleItems(10)
self.completer.setFilterMode(QtCore.Qt.MatchContains)
self.le.setCompleter(self.completer)
def create_layout(self):
main_layout = QtWidgets.QVBoxLayout(self)
main_layout.addWidget(self.le)
def create_connections(self):
pass
if __name__ == "__main__":
app = QtWidgets.QApplication(sys.argv)
my_dialog = MyDialog()
my_dialog.show()
sys.exit(app.exec_())
Test
On the left side you see the default behavior. On the right side the popup is moved down 4px:

Recursion Error on PyQt QStackedWidget when using enterEvent and leaveEvent

I am using a QStackedWidget which has its own enterEvent and leaveEvent. When I move my mouse to the QStackedWidget the enterEvent sets the current index to 1 and on the leaveEvent it sets the current index to 0 so that a different widget is shown on mouse enter and mouse leave in the area of QStackedWidget. It does what I want only if I quickly move my mouse in and out, if I place my mouse too long in the area I get RecursionError: maximum recursion depth exceeded.
Is this because the widgets are changing so fast that the internal stack can't keep up? My question is "How can I make sure this error doesn't occur? I want to display one widget as long as the mouse is over the QStackedWidget and when it is not I want to display the original widget."
The following is the code that I modified (Original Source used buttons to set the index and it is PyQt4)
import sys
from PyQt5.QtWidgets import *
from PyQt5.QtCore import QTimeLine
from PyQt5.QtGui import *
class FaderWidget(QWidget):
def __init__(self, old_widget, new_widget):
QWidget.__init__(self, new_widget)
self.old_pixmap = QPixmap(new_widget.size())
old_widget.render(self.old_pixmap)
self.pixmap_opacity = 1.0
self.timeline = QTimeLine()
self.timeline.valueChanged.connect(self.animate)
self.timeline.finished.connect(self.close)
self.timeline.setDuration(333)
self.timeline.start()
self.resize(new_widget.size())
self.show()
def animate(self, value):
self.pixmap_opacity = 1.0 - value
self.repaint()
class StackedWidget(QStackedWidget):
def __init__(self, parent = None):
QStackedWidget.__init__(self, parent)
def setCurrentIndex(self, index):
self.fader_widget = FaderWidget(self.currentWidget(), self.widget(index))
super().setCurrentIndex(index)
def enterEvent(self,event):
self.setCurrentIndex(1)
def leaveEvent(self,event):
self.setCurrentIndex(0)
if __name__ == "__main__":
app = QApplication(sys.argv)
window = QWidget()
stack = StackedWidget()
cal=QCalendarWidget()
stack.addWidget(cal)
editor = QTextEdit()
editor.setPlainText("Hello world! "*100)
stack.addWidget(editor)
layout = QGridLayout(window)
layout.addWidget(stack, 0, 0, 1, 2)
window.show()
sys.exit(app.exec_())

The recursion occurs because when you start the FaderWidget it changes focus and enterEvent is called again which creates a new FaderWidget.
The solution is to verify that the old index is different from the new index to just create the FadeWidget:
import sys
from PyQt5.QtCore import QTimeLine
from PyQt5.QtGui import QPainter, QPixmap
from PyQt5.QtWidgets import (
QApplication,
QCalendarWidget,
QGridLayout,
QStackedWidget,
QTextEdit,
QWidget,
)
class FaderWidget(QWidget):
def __init__(self, old_widget, new_widget):
QWidget.__init__(self, new_widget)
self.pixmap_opacity = 1.0
self.old_pixmap = QPixmap(new_widget.size())
old_widget.render(self.old_pixmap)
self.timeline = QTimeLine()
self.timeline.valueChanged.connect(self.animate)
self.timeline.finished.connect(self.close)
self.timeline.setDuration(333)
self.timeline.start()
self.resize(new_widget.size())
self.show()
def paintEvent(self, event):
painter = QPainter(self)
painter.setOpacity(self.pixmap_opacity)
painter.drawPixmap(0, 0, self.old_pixmap)
def animate(self, value):
self.pixmap_opacity = 1.0 - value
self.update()
class StackedWidget(QStackedWidget):
def setCurrentIndex(self, index):
if self.currentIndex() != index:
self.fader_widget = FaderWidget(self.currentWidget(), self.widget(index))
super().setCurrentIndex(index)
def enterEvent(self, event):
self.setCurrentIndex(1)
def leaveEvent(self, event):
self.setCurrentIndex(0)
if __name__ == "__main__":
app = QApplication(sys.argv)
window = QWidget()
stack = StackedWidget()
cal = QCalendarWidget()
stack.addWidget(cal)
editor = QTextEdit()
editor.setPlainText("Hello world! " * 100)
stack.addWidget(editor)
layout = QGridLayout(window)
layout.addWidget(stack, 0, 0, 1, 2)
window.show()
sys.exit(app.exec_())

QProgressDialog doesn't display well

I have some issues with the QProgressDialog class from the PySide2 lib : The progress bar doesn't display well for the first 2 steps.
My code is organised as below :
main.py
def main():
app = QApplication(sys.argv)
window = MainWindow()
window.show()
app.exec_()
if __name__ == "__main__":
main()
Graphic.py
class ProgressBar:
def __init__(self, SIZE):
self.progress = QProgressDialog('Work in progress...', 'Cancel', 0, SIZE)
self.progress.setAutoReset(True)
self.progress.setAutoClose(True)
self.progress.setMinimum(0)
self.progress.setMaximum(size)
self.progress.setFixedSize(250,100)
self.progress.setWindowTitle("MyTitle")
self.progress.setWindowModality(Qt.WindowModal)
self.progress.show()
self.progress.setValue(0)
class MainWindow(QMainWindow):
def __init__(self):
QMainWindow.__init__(self)
def createProgressBar(self, SIZE):
self.progressBar = ProgressBar(SIZE)
def createClassA(self)
ClassA = ClassA(self)
ClassA.beautifulfunction(10)
ClassA.py
class ClassA:
def __init__(self, parent):
self.parent = parent
def beautifulfunction(self, SIZE):
self.parent.createProgressBar(SIZE)
for index in range(0, SIZE):
SOME CODE..
self.parent.progressBar.progress.setValue(index + 1)
My next try will be to use threads but before I want to be sure that I can't fix my code without it.
Can you help ? Can you tell me why the first 2 steps of my progress bar doesn't display ?

Calling QMainWindow From Second QDialog

My PyQt application starts with Login screen. If password OK, a module-screen (with icons) appears. When user click some button, a QMainWindow will appears. But I can't do this because of qmainwindow object has no attribute '_exec' error. This is my code:
from PyQt4.QtGui import *
from PyQt4.QtCore import *
class Main(QMainWindow):
def __init__(self, parent=None):
super(Main, self).__init__(parent)
...
...
class Login(QDialog):
def __init__(self, parent=None):
super(Login, self).__init__(parent)
...
...
uyg=QApplication(sys.argv)
class icons(QDialog):
def __init__(self, parent=None):
super(icons, self).__init__(parent)
...
self.buton = QPushButton()
self.buton.pressed.connect(self.open)
...
def open(self):
dialogmain = Main()
dialogmain._exec() #or dialogmain.show() ???
self.accept()
self.close()
uyg.exec_()
if Login().exec_() == QDialog.Accepted:
dialog = icons()
dialog.exec_()
else:
uyg.quit()
What am I doing wrong? Thank you.

Lately i have done the similar work:I have a loging window and a main window ,and I used something like a FSM to switch between the loging and main window.
Let's say we have 3 state:loging,main,quit.
STATE_LOGING = 0
STATE_MAIN = 1
STATE_QUIT = 2
STATE_DESTROY = 3 #this is a flag
class CState():
sigSwitchState = pyqtSignal(int)
def __init__(self):
super(CState,self).__init__()
def start(self):
pass
def sendQuit(self,nextstate):
self.sigSwitch.emit(nextstate)
class CLoginState(CState):
def __init__(self):
super(CLoginState,self).__init__()
def start(self):
w = Loging()
w.show()
def whenPasswdOk(self):
self.sendQuit(STATE_MAIN)
class CMainState(CState):
def __init__(self):
super(CMainState,self).__init__()
def start(self):
w = MainWindow()
w.show()
def whenMainWindowQuit(self):
self.sendQuit(STATE_QUIT)
class CQuitState(CState):
def __init__(self):
super(CQuitState,self).__init__()
def start(self):
#do some clean stuff...
pass
def whenCleanDone(self):
self.sendQuit(STATE_DESTROY)
class CMainApp():
def __init__(self):
self.app = QApplication(sys.argv)
def __CreateState(state):
if state == STATE_LOGING:
s = CLoginState()
if state == STATE_MAIN:
s = CMainState()
#... same as other state
s.sigSwitchState.connect(self.procNextState)
def procNextState(self,state):
if state == STATE_DESTROY:
QApplication().exit()
s = self.__CreateState(state)
s.start()
def run(self):
self.procNextState(STATE_LOGING)
sys.exit(self.app.exec_())
if __name__ == "__main__":
app = CMainApp()
app.run()

Apart from the application object and QDrag, please pretend that exec() doesn't exist. It is an utterly confusing method that essentially never has to be used. Especially not by anyone new to Qt.
If you want to display any widget, simply show() it. If you want to be notified when a dialog was accepted, connect some code to its accepted() signal. That's all.